Shutdown of Windows XP after installing an application problem

Similar Questions

• How can I do I check Windows Update after installing Windows 7 if my internet interface does not work?

  My only internet connection is done by an AT & T USB Connect 881U (mfg Serra wireless). Windows 7 update Advisor indicates that

  I need to check Windows Update after installing Windows 7 to make sure that I have the latest driver for this device, otherwise it can not work.
  If this does not work I have no way of checking Windows Update. Any suggestions of how I could get out of this situation if it happens.

  When all else fails RTFM:

  Install the Windows updates:
  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  Update your computer:
  http://Windows.Microsoft.com/en-us/Windows7/updating-your-computer

  Understand the Windows automatic update:
  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-automatic-updating

  Updates: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/updates-frequently-asked-questions

  Change how Windows installs or notifies you of updates:
  http://Windows.Microsoft.com/en-us/Windows7/change-how-Windows-installs-or-notifies-you-about-updates

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error 8024402f Windows update after installing service pack 2.

  I received the error: 8024402f for windows update after installing service pack 2. I tried to fix it and manual fixation on this website http://support.microsoft.com/kb/836941, but I still receive same error code what do I do? I checked the history update, but it is not a failure to update.

  Original title: 8024402f error Code

  Hello

  Often we see weird behavior as the result of a program of loading during the startup process.

  To solve these, we use the clean boot troubleshooting.

  The following article describes this process:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Please note that after refine us the cause, it is important that we return to a normal startup and manually delete the startup program.

  We'll do this before uninstalling Service Pack 2.

  If the behavior persists, then we can clean boot, uninstall and reinstall Service Pack 2.

  Best regards

  Matthew_Ha

• No icon after installing the application

  I'm back in coding after a VERY long time (over 12 years) and am myself easing with HTML5 for the Playbook development. I managed to put together a very simple little app, especially as a test of the procedure for packaging and submission... and maybe get a free Playbook for my wife who covets my 64 GB baby!

  Anyway, had everthing packaged and signed using ripple (an excellent program once I worked out how to use it) and he expelled.

  Last night I got a reply that it had been rejected because "no icon after installing the application.

  When I sent the thing to Blackberry I included two .png files, which was to be used as an icon, but I think I was also to include in the compressed... am I right in thinking, I should have added a line of code in the XML file to set this?

  I feel like a total * beep *... like the time where I got a test paper in college without putting my name on it!

  Welcome to BlackBerry WebWorks development!

  Yes, you provide your name and the home screen icon in the file config.xml WebWorks.

  Here is an example of a config.xml file:

  https://bdsc.webapps.BlackBerry.com/HTML5/documentation/ww_developing/code_sample_creating_a_bb_widg...

  Here's a guide for each of the items in this file.

  https://bdsc.webapps.BlackBerry.com/HTML5/documentation/ww_developing/working_with_config_xml_file_1...

  Also, for your interest, check out some examples of existing applications published on github:

  https://github.com/BlackBerry/WebWorks-samples

• Faulty Windows Update after installing Vista sp1

  I finally got windows vista service pack 1 to install on my computer. After installing, windows update keeps failing when trying to update.

  I get the error code 80246008

  I checked the BITS/Background Intelligent Transfer Service, and he was arrested. It is set as automatic (delayed start). When I try to run it it gives the error 1068: dependency or the group could not start

  Checking dependencies, I found that the COM event system + is thus stopped. It is located in autostart. When I try to start what it gives error 193: 0xc1 and says could not start the system event COM + on the local computer "Windows".

  
  

  I couldn't find anything on the forums which has worked so far

  @umchief only: Riffs on Mike's response, try this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Should I still had windows updates after installing Service Pack 3 on Wndows XP Pro

  I need my latest updates I installed after installing Service Pack 3 on windows xp pro? Because I'm trying to use less memory as possible, and I like 2 gigs of updates before I installed service pack 3. So I can go and remove the latest updates, or should I be?

  See this discussion, Thomas: http://aumha.net/viewtopic.php?f=62&t=33827 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot re - install windows 7 after installing the new motherboard

  I have a desktop HP, circa 2010, running Windows 7. It it a machine of HP brand with a product windows key that is related to specific hardware when I bought it. The motherboard died last week and the original is not available any more, so I had to install a motherboard ASUS. The PC starts fine until windows recognizes that this is a different material. The system restore fails also in the same Manor.

  Finally, I will restore this original sate is that it works even fines, it is a quad core with 8 GB memory and always runs fast. I have a new SSD drive I want to swap in and upgrade to Windows 10 after I return to a good state.

  I tried to install windows 7 from scratch for the new SSD, but I can't because the product key is a marked HP one and Microsoft does not accept it.

  Is it possible for me to get Microsoft to give me a new key proeduct, after all that I feel that I own this copy of windows and I have the right to re - install windows

  Any suggestions other than buying a new copy of windows is appreciated.

  Thank your for the answers. It looks like another office of Linux for me. Interesting to note that when I did a clean install of Windows 7 original Activation of Windows code on the side of the case worked well.

• Windows 7 and install/recognize the problems of printer HP LaserJet P2015 error - USB Device not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

  Title: Windows 7 and install/recognize printer HP LaserJet P2015 teething problems...

  I have a dell inspiron that was originally windows Vista and I changed to windows7.  I have a LaserJet where I work, a HP LaserJet P2015 printer and when I plug in the USB, it says (peripheral USB not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

  How and what should I do to get the printer going or to get the computer to recognize.  Installation CD will not work and I looked online and downloaded drivers but still the same thing.

  Hi LOliver,

  Method 1: Run the hardware and peripheral troubleshooting tool and check if it makes a difference.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Disconnect all USB (Universal Serial Bus) devices connected to the computer (unless your mouse and keyboard). Connect the printer and check to see if the problem persists.

  Method 3: Connect the printer to a different USB port and check.

  Method 4: Reinstall the USB (Universal Serial Bus) controllers.

   First of all, please disconnect all USB devices and then perform the following steps:

  (a) click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.

  (b) in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

  (c) repeat step 2 to uninstall all items under 'USB Bus controllers'.

   

  Then, restart your computer and windows will automatically reinstall all USB controllers.

   

  HP printer drivers- ensure that you download the driver appropriate for your device model package.

   

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• All windows crashes after the keychain Application

  Hello Apple and Apple community.

  I have a frustrating problem, I can't go right now, and it's annoying me...

  Several windows asking me to type my so-called "Keychain password" popped up, no matter how much I clicked Cancel.

  OK, Apple, fine, it is probably made for a logical reason. So I read about it and tried to change the Keychain password in the Keychain application, leading to a frustrating problem.

  As soon as I went to "Edit", and then to change the password, the application has frozen. After that, almost every other application or another program, I ran, would freeze and not respond. So that means I could not change the password and so could not remove the window popup permanent now asking me to type the password. So thank you Apple for your incredible technology. Works very smooth incredible guys!

  -Yes, I tried to restart my computer several times.

  -J' have OSX El Capitan Version 10.11

  Thanks to all those who have links to help me.

  < published by host >

  Please click on go > hold down the option key and don't release > then click library > Keyring > you will see a folder first alfa digital file.

  Right click on the file finally reboot apple logo & move to the trash and empty the trash.

• 10 Windows crashes after installing the BootCamp drivers

  I have an iMac (end of 2013). I want to install Windows using Boot Camp 10.

  Windows Setup runs smoothly and without errors. Problems begin when I start to install the software of BC. First problem is installing, it stops at the Realtek audio drivers and does not continue. I followed the following steps: boot camp installation hangs at realtek audio stepSearch or ask a question and it worked. Until I rebooted the computer. After installation, Windows does not start and displays either a screen with the sad face or runs the Startup Repair. Startup Repair is unable to do anything, only the Windows reset, it works.

  One last thing. I have a Samsung 850 Evo Pro custom-replaced drive. Some time ago I installed Windows on it normally and it worked until I made a few changes to the partitions on the disk. Strangely, without changing the size of partition, Bootcamp, Windows crashed in itself.

  What can I do now? Windows can operate normally without driver from Apple? I understand some features will be limited, but as I noticed it works well without driver BC.

  You have a Fusion drive? Can you post the output of the following commands in OSX Terminal?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  If you have a Fusion drive, please add

  sudo TPG - vv - r see the/dev/disk1

  sudo fdisk/dev/disk1

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• Cannot start Windows 7 after installing windows XP

  Original title: unable to load an earlier version of windows.

  I have been using windows 7 on my computer. Now, I installed windows XP but the problem is that windows 7 has been hiding and windows XP will load automatically. I mean that my PC does not give me the option to choose the two windows to use. I have not formatted the windows partition 7. There are, but hide. Please help me.

  Thank you.

  Hello

  Read the following article that may help you resolve this problem. This article is true for Windows 7 and Windows Vista.

  Windows Vista no longer starts after you install an earlier version of the Windows operating system in a dual-boot configuration

  http://support.Microsoft.com/kb/933179

  For more information: Dual Boot between Windows XP and Windows 7

• Problems of fonts Windows Mail after installing IE9

  I just installed IE9 (March 14, 2011) and started this complex problem. Have Vista Ultimate and use Windows Mail. My default font is Verdana "BOLD" by 10 points. With IE9, it seems much too fat (never appeared like that with IE8). Other fonts appear also too fat.
   
  Another strange aspect of the same problem, at the bottom of the HTML emails, you have three buttons (source combined, called edit): Edit Source overview.  Since IE9, they appear in bold - possibly a slightly larger than before in IE8 font.
   
  My emails stored in folders are in HTML format and on which they are considered, the fonts have changed since installing IE9 on many emails - but not all emails. The fonts must be Verdana 10 pt bold or some other fonts are now appearing in Times New Roman 10 points.
   
  There is a second distinct problem with TNR in Windows Mail. I used TNR 12 pt for an email and after you send the email, it appears therefore as TNR 10 pt when a response is received. Regardless of the source of the answer. I never use TNR 10 pt because it seems too small for most people. Somehow 12pt changed to appear over and over again as 10 pt. And now, he continues this model since I use IE9.

   

  A possible connection to explain to the police by changing the above problem. The default value for IE9 is TNR. [Tools > Internet Options > general tab > Fonts] Shouldn't some Web sites appear in TNR? They ALL appear in some other fonts, possibly Verdana. Affecting TNR font in the results of the accessibility in all fonts in all the websites appearing in TNR. I suspect when I changed the accessibility implementation, that in addition to changing Web sites, it also changed policies to e-mail in Windows Mail. I've since unchecked accessibility and "Fonts" are defined by default (TNR). The stored emails continue to show police TNR, that they do not return to Verdana.

   

  Anyone with similar problems?  Anyone has any ideas how to fix these issues?

  You can set the default font in Internet Explorer to the font you want in the mail via Tools client | Internet Options | Fonts.  Otherwise in IE9, you're stuck with what you have for Windows Mail.  The changes are again DLL located in IE9, and you cannot change these DLLs unless you go back to IE8.  Products of its Microsofts, so that they are accountable for your results.  Yes, delivers his "squarely" by Microsoft.

• I can sell OEM of Windows Vista after installing Win7

  So I was wondering if I could sell my Vista Edition windows Home premium oem after a clean install of the professional Windows7 offered by ELMS. Any help would be appreciated. Thank you!

  N °

  You can't sell it.

  The license of Vista OEM is related to the original computer it is installed on and dies with the computer.
  You cannot transfer it to another computer/laptop

  See you soon

  Mick Murphy - Microsoft partner

• WINDOWS 7 after installing Geforce GT 730 blends with no taskbar icon.

  I started a post telling how when I add the drivers for the Radeon HD 5450 card after reboot all I have is the background with no icons, the taskbar or the mouse and ctrl-alt-delete gives me just a black screen.

  All this occurred when my SSD drive was getting filled by windows. So do you have a reformat and install Windows 7 Home premium. After having some difficulties to get all the updates on and get a restore point of installation.

  After 6 or so re - do's gave up card AMD Radeon went out and bought a new Geforce GT 730... guess what! When I install the new drivers after reboot of the background with no icons, bar task, or the mouse and keys ctrl-alt-delete just gives me a black screen! If this isn't by saying its WINDOWS drivers! Now what?

  Original title: it is a problem of Windows 7

  You WON'T BELIEVE!

  Found on Google search and stumbled upon return to the ground only, No. icons, Task bar, mouse and control alt del does not work.

  They asked, you have two monitors? Use HDMI?

  BINGO!

  My PC is a HTPC and my TV in the other room is hooked to it.  GRRRRRRRRRRRRRRRRRRRR!

  4 days and $90 for a video card.

  Now I am posting this here, and the more the AMD site also because it is really stupid!

  Once installed the software updated it it will have to USE the DVI socket and should several jump to the top of list 1 of the 2 screens!

• I can't activate Windows 7 after installed my own.

  My laptop came with Windows Vista but I upgraded to Windows 7. I recently replaced my hard drive with an SSD and did install a clean Windows 7. But now, when I try to activate, I get the message that my key is not good for upgrades. How to solve this?

  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us