sick it be an app or driver USB available for down load Martin Light Jockey?

Similar Questions

• Ventrilo in world of warcraft runnig vista__Unable to enable DirectSound for some device.__DirectSoundCaptureCreate failed. HR = DSERR_NODRIVER. No sound driver is available for use

  My ventrilo was working fine two months ago, but now for some reason any gives me these errors, "unable to enable DirectSound for the selected device.
  DirectSoundCaptureCreate failed. HR = DSERR_NODRIVER. No sound driver is available for use. On my other computer samething but different error message that reads, "cannot open the input device. Another program, it may have already. RC = - 10"

  Event. worked fine on both computers. have updated and rolled back all the audio drivers, uninstalled event. and reinstalled. What continues?

  I have finnally got the answer that it must be run as administater. For the Horde!

• M1536 DNF printer driver is available for MAC OS 10.6.8?

  Hello

  I plan to buy M1536 DNF. I have MAC OS 10.6.8. Compared to data sheets, I understand that the printer drivers will be available for MAC Os 10.6.

  Printer driver is available for MAC OS 10.6.8?

  Thanks in advance

  Hello

  Drviers for 10.6.8 available in CD or online...

  I recommend to download the latest version for your OS from the link below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=IM-86036-3&cc=us&DLC=en&LC=en&OS=219&product=3974279&sw_lang=

  Shlomi

• Envy of HP dv7 - 7323CL: HP driver not available for my laptop after the WIN10, now said to use Windows updates

  I think I got this, just need confirmation, before I was going to HP.com to find udpated pilots, then site Web HP said if computers purchased after August 2013 have been tested, I think you could get the updates via the HP with WIN10 site.  My pc model was purchased in February 2013, it seems now that I have WIN10 there is no drivers for me page to go it says that I need to go to the updates of Windows.  Before I upgraded to 10, I was 8, and I had full access to the drivers download through HP.com page.  However, I think I understand now, I had a problem with the Norton Removal Tool, after using it, it makes my pilot biometric and disabled the Windows Hello to WIN10 - the reader of fingerprints for a connection.  The pilot appeared to be corrupted and I needed to just reinstall.  I finally found an old forum via HP where someone has had the same problem that I did and they are found to include a link for the driver, and it worked for my model of laptop and solved the problem.  After some tests, I uninstalled the driver and learned at that time, after the driver is uninstalled, I can go to Windows Update and it will search and find the driver that I uninstalled and offer me the download to reinstall.  That's cool.  So, I understand now that even now if the drivers are not available for my model via HP.com, I can now just do a search through Windows Update and it will fix the problem, only after that I uninstalled it through Control Panel, Device Manager, once I uninstalled, restarted the computer, then did the updates of Windows It downloaded the driver, like when I went to the Control Panel, Device Manager, I saw the biometric driver in good working condition.  This is the case now with who need driver updates / reinstall?  (Note: to update the drivers, I know too much, you can go to control panel, Manager of devices, and then click the driver and select Update driver software.)

  Hi @MVP1 ,

  Welcome to the Forums of HP Support! I have, I understand that you are concerned about Windows 10 updtaes. I'll be happy to help you.

  You are right.  Microsoft took the drivers for this computer.  All updates will now come from Microsoft.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• App approved, still not available for sale

  I checked at random my supplier portal in the hope that some of my portathon apps have been reviewed and I noticed something weird today.

  For my apps that I submitted again to the Community (which were initially denied), press section, they show that all human beings approved. The previous version shows declined, new version approved shows, and nothing does not appear under review.

  However, the application itself is not listed as being available for sale, and it is not this little button next to it that says: "Put up for sale", or something like that. He said also 1 CR is considered, whereas emissions show nothing under consideration.

  Am I missing a setting somewhere or looking at it wrong?

  I had exactly the same case with one of my apps. I solved it in Amsterdam, stand BlackBerryWorld (I explained everything than the guy from BB and it fix in two minutes). I guess you need to explain your problem to support BBWorld.

• BlackBerry smartphone App appears as not available for this device

  I have a 9700 OS5 running imapmyrun very well. Then I lost the camera and got a replacement. When I get home now myworld he says that the application is not available for this device. I tried to reinstall the operating system and also clear cache myworld appworld but I can't get this app to appear as anything other than unavailable. On forums I said that this means that it is not available, but then how did you manage to run this 3 days ago on exactly the same device on OS? Any ideas?

  I suggest you contact the vendor of the application for additional support. They will be able to confirm or deny if the application is available for your device.

  See you soon,.

• I have a single folio paid app and I want to migrate to a mult folio app with each folio available for purchase. How can I migrate those who bought my application single-folio so that they are able to keep the folio they paid for in the new folio multi ap

  I have a single folio paid app and I want to migrate to an app of folio to multi with each folio available for purchase. How can I migrate those who bought my application single-folio so that they are able to keep the folio they paid for in the new folio multi application?

  I'm sure that the only way to proceed is to make a free portfolio for all the world in your new application of muli-folio. There is no way to match the records of the purchase of an application with a new application that contains a folio.

  Apple wants to see at least one element of the library is available free of charge, in any case if the application has a utility when downloaded from the store anyway.

  Neil

• Small size of device driver USB-GPIB for distro?

  Hi all.

  I had a search, and you can't find a similar question so I hope I'm not duplicating something...

  I created a little app to control an Agilen 53132 meter using the USB-GPIB device OR that I would like people to be able to use internally in my group. Driver I use has been downloaded from http://joule.ni.com/nidu/cds/view/p/id/2315/lang/en.

  I see that my app uses the following DLLs. However, I a) disseminate these and b) there must be some drivers below this level that will be required by a clean system.

  gpibconf. SLL, ni482.dll, nipal32.dll, nipalu.dll, nipalut.dll, nispylog.dll.

  Only problem I have is that it is almost 0.5 GB in size. I want my application to distro with a smaller subset so that the user can install just the driver concerned & dll etc I need for using the USB-GPIB device. Does anyone know if a driver more small value distro exist please?

  Thank you very much

  James

  There is no available smaller driver.

• Re: Need driver USB HOST for Tecra 520CDT

  TOSHIBA TECRA 520CDT USB HOST DRIVER NEEDED

  May I ask why you need this driver?
  What OS do you have?

  Maybe you don t know a USB drivers are part of the windows operating systems and it of not possible to download it separately!

• HP G71-329WM: driver Sata necessary for the installation CD of Windows to see the new hard drive

  I have my own Windows 7 disk that can be used to install a lean and clean the operating system, however, it seems that the hard drive is not recognized without a sata driver any. I had to do this once with an HP laptop so that the Windows Setup CD see the hard drive. Unfortunately, I do not see such a driver downloads available for this laptop model. Can make you a suggestion on where I can find this driver?

  Hello:

  With the material of your laptop, you should not need the driver but here is the link for those that you need...

  The first file is for 32-bit and one for 64-bit.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=18668&lang=eng

  To install the driver, download and uncompress the files that you need a USB FlashDrive without all records.

  With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and I hope, will install W7.

• BlackBerry Smartphones BlackBerry App World doesn't work for us

  Hello
  I am a resident of Saudi Arabia and when I download software BlackBerry father tells me an error can not download
  Knowing her that I know that it doesn't work in Arab countries, but this thing bothers me very
  Please provide the solution
  ----------------
  Note that I use Google translation

  When all your Saudi mobile providers to sign agreements with RIM BlackBerry to support App World, then App World will be available for your devices.

  Right now, it's your mobile phone operator. You should call them and put pressure to get App World taken in charge.

  Good luck.

• External hard drive USB on Time Capsule

  Hello

  I have an external USB hard disk and plug it into the USB port of my Airport Time Capsule makes it accessible wireless (if on the sidebar of the window under the section 'sharing' I click on the Time Capsule to enter airport name next to his record 'data', I also have a folder with the name of my USB HD and I can access).

  Now the problem. I have a USB external hard drive, I can access normally connect my iMac or iBook portUSB one, but, if connected to the time Capsule... nothing happens.

  So there must be a difference in the two external hard drive. What a difference creates the problem, why and what I can do is my question.

  Can someone help me?

  So far, here is what I found to be the similarities and differences:

  The two serial ATA, 2 to, partition GUID mapped external USB hard drive.

  In disk utility, one that is visible on the Time Capsule is displayed as 'external HARD disk support' physical disk with OS X extended physical volume. One who isn't appears as physical disk 'external media' with logic extended OS X volume.

  TX

  Hi Ranmaboy,

  I understand you have two external hard drives USB that you want to connect to your airport Time Capsule via USB, but one who is not recognized by the Capsule from the airport. Given that this player connects to your iMac without problem, I would recommend that you backup all data stored on the disk, and then follow the steps here to re - format the drive using disk utility:

  Backup disks, you can use with Time Machine - Apple Support

  Format a drive connected to an AirPort Extreme 802.11ac or Time Capsule

  If you are using an AirPort Extreme 802.11ac or Time Capsule, you can connect an external drive to the USB port on these devices for use with Time Machine. Follow these steps to reformat the hard disk in the first place, it is ready for use.

  1. Connect the hard drive to a USB port on your Mac.
  2. Open disk utility.
  3. On the left side of the disk utility window, select your external drive (or one of its partitions).
  4. Click the delete or delete button on the toolbar.
  5. On the Format menu, choose Mac OS extended (journaled).
  6. Type a name for your drive, and then click clear.
  7. After that the drive is deleted, close the disk utility window.

  Once the disk has been reformatted, try to connect this back to the airport Time Capsule to see if it is now recognized.

  Have a great rest of your day!

• USB port from a digital Multiport card will not read the external SSD drive. Right USB - c for the USB adapter works fine.

  USB port from a digital Multiport card will not read the external SSD drive. Right USB - c for the USB adapter works fine.

  It's a new 12 '' MacBook

• New driver USB on my laptop Portege of loading

  I have problems with a site I subscribe to who went through an upgrade.

  The website said that the problems were because he was a blocker adware on the cell, preventing the load correctly the site.

  I deleted all suspicious looking for programs, and although the site now works perfectly when I go to eject a USB device instead of seeing the listed devices I see...

  To work around this, I tried to reload the driver USB from Toshiba, but I get the following message:

  A later version of Renesas Electronics USB 3.0 host controller driver is already installed on the machine.
  The implementation cannot continue.

  I need to remove the driver completely then re - install?

  > when I go to eject a USB device instead of seeing the devices listed, I see...

  I'm afraid that your message isn't clear enough of m.
  What problems do you have exactly with USB ports?
  You can use all the USB devices connected to USB ports?

  What Portege laptop and how Windows system you have exactly?

  The USB driver that you found seems to be already installed on your laptop and the new facility isn't necessary.

  However, please answer my questions above for more information on the issue.

• Mini Toshiba external driver.usb 2.0

  I bought a mini PC 7 android.
  I also bought a mini external pilot, when I put the USB in the mini PC
  It connects fine to the TI says it is u-disc. It's a (mini Toshiba external driver.usb 2.0)
  I put a few pictures to test, but he says always the same.
  in the settings it says (not available)
  could you please help me
  Thank you

  system: mini PC 7 android
  version 2.2
  kernel version 2.6.32.9 - default
  build number froyo generic - Eng2.2 ver1.5.5 - 20110920.103830

  Hello

  Do you have the same connection error an another USB 2.0 external HARD drive or a USB flash memory stick this laptop?
  Test this
  Maybe this problem of HARD drive.

  USB 2.0 provides a power of 500 my if an external USB HDD or USB device needs more power, a problem may appear.
  In such cases its recommended to connect a USB hub with an external power supply between the laptop and the USB device