Side static Panel (when the rest of the page scrolls up/down)

Similar Questions

• Designate a tab in the Panel tabs on the default start tab when the page loads?

  How can I designate a tab in the Panel tabs on the default start tab when the page loads? Anyone know?

  In fact, whatever tab is active in Design view should be the tab by default when the site is published/exported/Uploaded.

• Static variables in the Page of the OFA

  Hello
  
  We have a requirement to show the popup message when changes are made in the page of the OFA. We use the static variable in the OPS page to store the initial values of some fields and whenever the popup needs to be shown, it compares the value of the static variable for the current value. If they are different then we are the message. It works perfectly fine when the page is accessed by the single user. But when several users access a single screen, it shows the message to a user even if the values are not changed by this user, but the other user has changed. My question is-
  
  1. do we need to use variables of session always for users multiple scenarios?
  2. How does the static variable in java? It is not unique to the session? If so, above the question shouldn't come.
  3. how to solve the problem above?
  
  Pointers on this would be a great help.
  
  Thank you
  Shree

  I did not understand the part same page can be accessed by different users. In any OA framework Page, the same page is accessible by several users. If you think abt the same data updated at the same time, then search functionality of Version number of the object in the context of OSTEOARTHRITIS.

  All instances of the VO are unique for each session. So no need to worry about this side here.

  Concerning
  Sumit

• USB ports have power when the PC is shut down. Power supply connected to the battery.

  PC is HP G62 - 222us W7 64-bit.  When the PC was first powered, they gave me the option to allow USB ports ON or OFF after his stop. I chose IT, but now I want ports USB OFF after his stop.  I can't remember have this option is found. Any help would be great.   Thanks in advance for your help...

  I found my answer: Control Panel Goto (W7), search for 'power', click "Change the Power settings", click on "USB settings", click on "USB selective suspend parameters", for the battery, select "Disable", except change, click OK.

  Now, all USB PORTS are INACTIVE when the PC is shut DOWN.

• When firefox is opened the page scrolls to the top and I lost the menu bar

  When I open firefox the page scrolls to the top and I can see no longer the menu bar. Somehow, I think I clicked on 'white page' and now I can't view the entire page.

  Make sure that you run not Firefox mode full screen (press F11 to toggle).

• Explorer.exe stops when the computer is shut down

  Explorer.exe stops when the computer is shut down

  Hi DickKimberley,

  ·         What exactly happens when you try to shut down the computer?

  ·         You receive an error message error code?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to consult the article in the Microsoft Knowledge Base and check.

  Advanced Troubleshooting for shutdown problems in Windows XP

  http://support.Microsoft.com/kb/308029

   

  Method 2: If the method above doesn't follow the article mentioned below.

   

  Windows stops responding during Windows XP shut down

  http://support.Microsoft.com/kb/307274

  Let us know if that helps.

• Background image disappears when the user scroll down

  Hello

  Here is a class that paints a picture as desktop wallpaper. My problem is that if a vertical scrolling is on the screen, when scrolling down the background image does not scroll also. Is it possible to repeat the background so that it is always on the screen when the user scrolls down.

  Thank you.

  SerializableAttribute public class BaseVerticalFieldManager extends VerticalFieldManager {}
      
      
  public BaseVerticalFieldManager (long style) {}
  Super (style);
  }

  Public Sub paintBackground (Graphics graphics)
  {
  graphics.drawBitmap (0, 0, Display.getWidth (), Display.getHeight (), Constants.BACKGROUND_IMAGE, 0, 0);

  }
      
  }

  adrianeireyahoo wrote:

  Public Sub paintBackground (Graphics graphics)
  {
  graphics.drawBitmap (0, 0, Display.getWidth (), Display.getHeight (), Constants.BACKGROUND_IMAGE, 0, 0);

  }

  The values highlighted are wrong - you need to keep track of the Manager scroll position. In addition, using Display.getWidth () and Display.getHeight () isn't exactly smart - use getWidth() / getHeight() Manager itself.

  In short, the correct code would be:

      public void paintBackground( Graphics graphics)
      {
          graphics.drawBitmap(getHorizontalScroll(), getVerticalScroll(), getWidth(), getHeight(), Constants.BACKGROUND_IMAGE, 0, 0);
      }
  

• signal no disconnection when the page is closed by the gesture of eye?

  Hello

  Falling on a particular issue... First of all, I connect my context object to signal a bit of javascript using the onCreationCompleted

  onCreationCompleted:
  {
          // When the top-level Page is created, direct the data source to start
          // loading data
          MyObject.signal_1.connect(onJavaScriptFunction_1);         MyObject.signal_2.connect(onJavaScriptFunction_2);               MyObject.signal_3.connect(onJavaScriptFunction_3); }
  

  So far everything is going well, but if I unplug these signals, the page is busted, so the next time that the page is created, these signals will be attached to the same javascript function once more and so on for every time that the page is re-created.

  Then I thought, I should unplug these signals when the page came out... Therefore, I have given the NavigationPage because I couldn't see any signal onPopped or onDestroy... So I used the following code:

      paneProperties: NavigationPaneProperties
      {
          backButton: ActionItem
          {
              onTriggered:
              {
                  console.debug("Popping page, disconnect signals...")                // Disconnect signals
                  MyObject.signal_1.disconnect(onJavaScriptFunction_1);                      MyObject.signal_2.disconnect(onJavaScriptFunction_2);                 MyObject.signal_3.disconnect(onJavaScriptFunction_3);
  
                  // define what happens when back button is pressed here
                  // in this case is closed the detail page
                  navigationPane.pop();
              }
          }
      }
  

  After testing a few creation of the page / page popping, everything works fine. Signal is attached only once. But every time I close the page by using the gesture of look, then I suddenly I begin to see multiple signals attached to my context object... as directed by the console log output:

  emit > signal_1
  onJavaScriptFunction_1()
  onJavaScriptFunction_1()
  emit > signal_2
  onJavaScriptFunction_2()
  onJavaScriptFunction_2()
  

  My questions

  1. Where can I sign out signals to avoid leaving the unwanted signals connection?
  2. All the QML object seems to have a signal of {onCreationCompleted}, is an onDestroyCompleted or something similar?

  Thank you

  Hello

  There is no equivalent onCreationCompleted.

  But you can set a JavaScript function such as

  Page {
    function cleanup() {
      // disconnect signals here
    }
  

  and call from NavigationPane onPopTransitionEnded:

  NavigationPane {
    onPopTransitionEnded: {
      page.cleanup()
      page.destroy() // destroy the page if it was created dynamically
    }
  

  UPD: another option is to use the element of connection of QtQuick. According to this thread, it works in Cascades:

  http://supportforums.BlackBerry.com/T5/native-development/QML-connections-element/m-p/2063301#M9550

  Connect/disconnect signals automatically, but I haven't checked this app cascading.

• How to develop all the rows of the table of the tree when the page loads?

  Hi all

  I have tree than VO mere reference of table... I want to expand all table tree rows when the page loads... I already have initially developed property to true... but it only runs from first line of tree...

  Any help would be great-Jey

  In the backbean and that:

    private RowKeySetTreeImpl ps = new RowKeySetTreeImpl(true);
  
    public void setPs(RowKeySetTreeImpl ps)
    {
      this.ps = ps;
    }
  
    public RowKeySetTreeImpl getPs()
    {
      return ps;
    }
  

  In the jspx set table tree as disclosedRowKeys

• Get the values of default table row when the page loads

  Hello

  I am running JDev 11.1.1.7. We have a page that contains two tables in a relationship of the master / detail of nickname. We can do a real master ADF / detail with view items related because the query for the 2nd table is complex and works best when queries with binding settings. The View object for the 2nd table has a request with 2 link params as it can get in the first table. Thus, when a line is selected in the first table we want to execute ExecuteWithParams on the object from view of the table 2. We do it in the Bean managed for the page in a method that is the selection to the first table listener. It works fine except when the page initially loads, the first line is selected by default. When the default value is selected the selection listener is not triggered.

  I've seen the suggestion of not having a line selected by default when the page loads by removing the value selectedRowKeys on the table. However, we do not want that the 1st row of the table secondary master to be selected by default and we as the table of detail to show the correct corresponding lines.

  Steve

  Steve,

  Not really sure when you say that the 2nd table is complex and may not use the master detail. If the settings link in the parent table, you can set the ViewLink accordingly and it should work, right?

  In any case, if you're after the execution of methods on the loading of the page, you will find the links below.

  If it's a working group, you can add a methodCall as activity by default and UTF, you can use phase listener (if listener server does not).

  https://blogs.Oracle.com/aramamoo/entry/an_epic_question_how_to

  Advice from the Oracle Johny: ADF: how to run the ViewObject with a ViewCriteria on the PageLoad in Application Web ADF

  It will be useful.

  See you soon

  AJ

• record in the query when the page load

  Hi How can I make my block to query the record when the page load I don't have what it takes to press F11 + Ctrl I just what to load the data when the page loads for this field or block

  I did it

  create a LTRC of control block of data with the SERVERNAME element non-base

  Give it a value in the a time-new-form-Forum

  CGFK$ QRY_SERVER_TABLE(:CTRL.) SERVERNAME); and it works

• How to keep the region selected when the page is sent

  Hello

  I created a page with several area equipped with a region selector.

  When the page is sent, the region selector returns to 'show all '.

  I would like to keep the selected region, but don't know how.

  Any ideas?

  APEX version: 4.2.6.00.03

  Theme: 26

  Best regards

  Klaus

  Hi Klaus,

  Please follow the Blog solution

  http://blog.theapexfreelancer.com/2011/11/sticky-region-display-selector/

  Hope this helps you,

  Kind regards

  Jitendra

• [ADF, JDev12.1.3] Call ExecuteWithParams operations programmatically when the page is loaded. How...?

  Hallo,

  in a working group, I have a 'readonly' page that uses in many istances VO (for fields, tables,...).

  When the page is loaded, I need to call its ExecuteWithParams operation for each VO.

  I would drag / drop (cascading) the operation of each VO ExecuteWithParams in the workflow, but the problem is that I need to run logic to call.

  For example, I have some cases in which I have to exec VO, and then pass the value of a field in the returned to the VO ExecuteWithParams, another record.

  I guess I can't manage this 'declarative' in the taskflow but I use code in a managed bean.

  So far, I've added for each VO ExecuteWithParams action page links.

  I know I can use a code like this to call the ExecuteWithParams for each VO...

  OperationBinding operationBinding = BindingsUtils.getBindings().getOperationBinding("ExecuteWithParamsToCall");
  operationBinding.getParamsMap().putAll(paramsMap);
  Object result = operationBinding.execute();
  if (!operationBinding.getErrors().isEmpty()) {
    return false;
    }
  

  ... but the problem is... where and when I call?

  I wrote in the managed bean extended view a public function initPage() tha called the ExecuteWithParams.

  How to use this function?

  I can use it during the lazy fo page load?

  Can I use it as a method call to place in the working group before the page? I have to admit that I already tried that way, but it did not work...

  In addition, after calling a VO ExecuteWithParams, as I said before, I may have the need to treat the VO after his execution to gather values for some fields (I'll pass these values to the other VO ExecuteWithParams).

  Can I access the iterator from the bean by using the iterator binding?

  Thank you very much

  Federico

  Instead, I have to create it in the the methodCall1 pageDef?

  Yes

  And if methodCall1 calls - as in my case - the function of a bean that uses the ExecuteWithParams many istances VO... I create all the necessary links in the methodCall1 pageDef?

  Yes

  And Yes... Links ExecuteWithParams that I created in the page untitled1 aren't necessary?

  Once again Yes (except if you do not have to invoke to untitled1 page)

  If you have 2 minutes trying to download the app, so you'll have is that I was

  I have more than 2 minutes (I hope), but I did not immediately jdev

  Dario

• Validation of required field only when the page loads (HR test case!) included

  Hi experts,

  
  Here you have a simple test for Jdev 12.1.3 HR case: https://dl.dropboxusercontent.com/u/18609389/TestHR.zip

  The main.jspx is just a button which CreateInsert a record dept displayed in another page:

  

  My problem is the following page (test.jspx) has this code to run when the page loads:

  <af:serverListener type="onloadEvent" method="#{backingBeanScope.backinBean.onPageLoad}"/>
              <af:clientListener method="onLoadClient" type="load"/>
              <af:resource type="javascript">
                function onLoadClient(event) {
                    AdfCustomEvent.queue(event.getSource(), "onloadEvent", 
                    {
                    },
  false);
                    return true;
                }
              </af:resource>
  

  The code is simply this (now):

      public void onPageLoad(ClientEvent clientEvent) {
          logger.severe("HR TEST.....");
      }
  

  And that's the problem, required validation is performed.

  

  Can you tell me why?

  Thank you

  Jose.

  Don't know what is my mistake, but the code is of the actionListener button is not called. :-(

  Well, you combined two different ways to do this (from my first answer).

  If you are still reading this, you will notice "or" before the second suggestion

  Thus,.

  1. keep your clientListener under af:document tag

  2. based on javascript, you find key (use: alert ("button");)  to see if you have referenced correctly your button in findComponentById())

  And then:

  approach 1:

  Use AdfActionEvent.queue (button, true);  queue event on your action button and implement your logic in function attached to the properties of your 'actionListener' or 'action' button (if you don't need listener server in this case)

  approach 2:

  Use AdfCustomEvent.queue (button, "onloadEvent", {}, false);  the queue onloadEvent on your button (in this case you need listener server attached to your button)

  Dario

• Move links to javascript value when the page is loaded

  Hello

  I use JDeveloper 11.1.2.4.0.

  When loading my jsf page, I want to pass the value of the lat, long columns of links the attribute so that the map google map is rendered correct loading of the page.

  I can do when a button is clicked.  But I want to do it when the page is loaded.

  Any ideas?

  Thanks in advance.

  Here is the code snippet, which includes the javascript function: instead of coding hard - 34.397 and 150.644, I would like to happen next as parameters or

  access it some how from the pagedef attribute binding.

  	< f: facet name = "metaContainer" >
  	" < af:resource type = 'javascript' source = ' https://maps.googleapis.com/maps/API/js?v=3.exp & Sensor = false "/>
  	< af:resource type = "javascript" >
  	var map;

  	initialize() function
  	{
  	var mapOptions =
  	{
  	Zoom: 8, Center: new google.maps.LatLng (-34.397, 150.644)
  	};
  	card = new google.maps.Map (document.getElementById('map-canvas'), mapOptions);
  	}

  	google.maps.event.addDomListener (window, "load", initialize);
  	< / af:resource >
  	< / f: facet >

  Hello

  set a listener of phase for the view (using the beforeMethod on the f: view of the page markup). In the method, then use the ExtendedRenderKit Service to call JavaScript from Java. The method must listen for the phase PREPARE_RENDER, who is the liaison for the page to exist. You can access the link from BindingContext.getCurrent () .getCurrentBindings () layer. From there, you call (AttributeBinding) bindings.get ("the binding of the attribute name") to get the attribute mandatory and then - in a next step - the inputValue with data to transmit

  Call JavaScript from Java:

  String script = «...» Add JS calls to set values in JS variables accessed by Google Maps"

  ExtendedRenderKitService erks = Service.getRenderKitService (context, ExtendedRenderKitService.class);

  erks.addScript (context, script);

  Frank