Signature custom

Similar Questions

• Example of signature custom IOS IPS devices.

  Hello.

  Does anyone know a simple example to configure and test the custom signature of the IDS MC feature in IOS IPS devices?

  I searched for this topic, and I found an example of detection device about set an alarm when telnet is detected, but I didn t can do in Device IOS IPS because that was not the same parameters.

  Thank you.

  IOS IPS work on traffic that flows THROUGH the router, and not on the traffic flowing on or THE router.

  You should try to telnet to a device through the other side of the router instead of the interface of the router. Also an interface through the IOS IPS interface is not enough as IOS IPS does not work as an ID of sniffing traffic on the local network segment. Traffic must flow through the router.

• create a signature custom photos

  I am new to Adobe photoshop and does not know how to create a custom logo / signature put on all my photos - someone can help?

  Logos should probably be created in PNG format by an editor based on pixels as Photoshop or Photoshop Elements or a software like Illustrator or CorelDraw. Lightroom does not have the capacity for this type of Logo design

  Once created, you can use the watermark feature in Lightroom to apply it to all your images on Export, Web, Print, slideshow versions.

• Digital signatures / Custom Signature Logo

  Good morning-

  I get quickly acclimated to the concept of digital signatures as my employer is stiving to a paperless office.  I have several questions which have developed, but I'll start by (hopefully) an easy one:

  When one aspect of the digital signature is beign created, one option is 'Logo', which will place the Adobe "A" behind the image signature information and timestamp.  Is it possible to put a custom logo behind there - as the emblem of my company?

  Thank you very much

  Warren

  Hey Warren,

  The answer is Yes, you can replace the clover PDF (it is not the software Adobe A) with your own logo as a background. Open the image file in Acrobat, and it will be converted to a PDF file. You don't crop the image. For that, you have Acrobat Adobe Reader free software cannot convert images to PDF. The next thing is to save the file with a specific name and a specific location.

  The name of file, you will use is SignatureLogo.pdf and there is no space in the name of the file to note. You must save the file in the following location:

  • Windows XP: C:\Documents and Settings\\Application Data\Adobe\Acrobat\\Security
  • Vista or Win 7: C:\Users\\AppData\Roaming\Adobe\Acrobat\\Security
  • Macintosh: \Users\\Library\Application Support\Adobe\Acrobat\\Security

  I'm sure you understand that will match the name of the logged in user and is the current major version of Acrobat or Reader. Although Acrobat and Reader to settle in different locations and even use separate registry entries, they share the users application data directory.

  Steve

• Digital signature custom

  I need to create a snap custom digital signature and I wonder what would be the easiest to take route.

  There must be some fields that the user must fill in a user interface, and it should also go to our database online and get custom of the person signing.

  The signature is a set of their signature actualwritten. These areas and the signature must go in the visible block, then it must be signed.

  My questions are: is all of this possible with the Acrobat API (I guess)?

  Should I do as a plug-in, or use javascript? Which would be a lot less time?

  I have reviewed the documentation, and it seems as if all my needs could be made using JS, then that would be the simplest method.

  I just need to know if anything can be done before I start on this path there.

  Thank you! I use Acrobat 8.1 SDK and Acrobat 8 Professional on Windows XP-based computers.

  Yes, it is possible.

  You will need to write a plugin, which is the only set of APIs that are rich enough.

  Look at the different samples in the SDK for signatures, stamping of images etc.

• Signature custom for the maximum number of connections

  Hi, is there a signature to check the maximum number of connection to a host attacker to open a port to the victim? or should I make a costom for this signature?

  Hello

  You certainly can do it on the IP addresses, follow these steps in making a signature Atomic-ip looking for a tcp packet with only the SYN flag set on port 443 to the destination. You would then add a number of events for the number of connections you need. According to the site however this will flood the channel alarm with alerts, because traffic going out etc it will trigger. Of course, this can also be problematic with NAT.

  I don't know one of the guys ASA on these forums could give an answer better than me with regard to the configuration of the SAA.

  I understand they'RE a dynamic IP filtering or something that can be used to do this, although I've never configured myself.

  Thank you

  Neil

• How to create and use a signature custom for photographs

  How can I create a stamp/brush that I can use to sign my photos?

  You use the text tool to type your signature

  Use the Quick Selection tool to select the portion of text

  Then, click the Edit Menu< go="" to="" define="" brush="">

  And save the brush with the name.

  If the brush is just presented, you can increase the size of the brush.

  Kind regards

  ~ Mohit

• Create and deploy a custom signature ID

  I know how to write a snort signature, and it is very easy to deploy than the signature. But I don't know if I can do the same thing for cisco ids, I mean easy customization signature and signature fast deployment.

  The simplest scenario is to use the new wizard's Signature custom in the latest versions of 4.1 of the sensor:

  http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/csids/csids10/idmiev/swchap3.htm#31623

  If you use IDS MC for the configuration, then I recommend using the Signature Wizard to create the signature on a sensor, then using the fields created, you can add this signature in IDS MC for deployment on multiple sensors.

  http://www.Cisco.com/univercd/CC/TD/doc/product/rtrmgmt/cw2000/cw2000_b/vpnman/vms_2_1/idsmc11/UG/CH05.htm#520329

  Step 5 to add signatures

• IDS 4.0 custom signature - catch a URL

  Hello

  can someone help me with what I thought it was a simple task, but it happened to be a bit more than that. I want to see an alarm when someone tries to go the following URL: http://www.vasco.si/oddaljeno_delo.htm . Thank you.

  This will require a two-step process. First, create a signature custom looking for the URI in question. For sensors 3.x, use the STATE. HTTP engine. 4.0 sensor, use the SERVICE. HTTP engine. You will fill the UriRegex with ' / oddaljeno_delo.htm'. This may be all you need. However, if you want to be exact, you need to create an alarm filter to match only on the IP address for the site in question. For more information about how to perform this step, see the documentation for the IDS.

• How can I stop dashes appear above my signature?

  I used Thunderbird to create a signature custom HTML format that includes a picture and links, etc.

  It works well and looks good (for my artistic abilities, ha ha).

  However, the two dashes are always inserted on a separate above the signature line. They create a clumsy search gap in the presentation of the email I have to delete every time I have send an email.

  No idea how to stop Thunderbird to insert additional lines and dashes above the signature?

  ' - See ' Snip-It "image below.

  http://KB.mozillazine.org/signatures _ (Thunderbird) #Removing_the_signature_separator

• Digital Signature in Reader and Acrobat behavior

  I created a file PKCS #12 digital ID in Acrobat 7, which included a graphic image of a real signature. When I apply this signature in Acrobat, it shows the image of the signature in addition to the other information I've included in the file. When I apply this signature in the reader but rather than the graphic image it simply places the file name information in block type where the image should be well that it always includes the other information in the file. Anyone know why this would be the case and how I can fix?

  Thanks for your help

  Brian

  Hi Brian,.

  The image is not part of the file P12, but rather an aspect of personal signature that you created in the Preferences dialog box. To create a signature custom in player appearance:

  • Select it Edit > preferences (Windows) or the Adobe Reader > preferences (Mac) menu item.
  • Select Security in the Categories list box
  • Click the new button in the appearance group box
  • Select the imported graphic on the configure Signature appearance dialog box, and then click the file button
  • Click the Browse button in the select an image dialog box
  • Navigate to and select the image you want to use, and then click the Select button in the open dialog box
  • Click the OK button in the select an image dialog box
  • Provide a title (for example my Signature) and select/deselect the checkboxes for the items you want to display or remove
  • Click OK in the configure Signature appearance dialog
  • Click the OK button in the Preferences dialog box

  Who should do it for you

  Steve

• Reset TCP

  I can't configure the TCP Reset on my IPS 4255 in Promiscous mode.

  I declare a unique interface 0/0 IPS as a tcp reset, for interface 0/1 gig.

  but still does not. Please tell me how to configure and how to verify the configuration.

  Guidance TCP STRING signature custom "to the server' Telnet (Port 23). Match any string like 'abcd '. Now to telnet on the vlan SPLIT and then try to type abcd. as soon as you type "(the last letter) your telnet connection will be stuck :)

  Concerning

  Farrukh

• How can I put If/Then logic in a PDF form?

  I hope it will be very easy for this group - I'm doing a form, and he needs a logic in it. Talk to me as if you are talking to a 5 years, I really struggle with programming that is not in Excel.

  Anyway, the gist of this is that I have a drop-down list. It is called "Contact". I have an another text box named 'Validator '. Depending on your selection in 'Contact', I need a different output in 'Validator '.

  So if the customer is 'Customer initiated the transaction in person', then validator must be "signature customer match." If the customer is 'Customer sent by e-mail or fax the instructions' validator there "have colleague fill in Section III.

  How can I do this?

  Thank you!

  Probably the way easiest to implement is to set the export value of each item in the drop-down list in the expression that you want to appear in the text field. Then calculate it, tab of the Properties dialog box field for the text field the following custom calculation script:

  Calculation script customized for text field for Validator

  Event.Value = getField("Contact").valueAsString;

• Signature error code: customer ID is not in the database of the authorization

  Everything worked well on JDE 4.2. Then I installed JDE 4.5 and compiled my project to use it. But when I ask signature now it says "Code signing request failed because xxxxxxxxxx customer ID is not in the database for authorization.

  Please tell what is wrong.

  Thanks in advance

  Hello, there were several changes in the BlackBerry servers...

  See the following URL: http://supportforums.blackberry.com/t5/Java-Development/Signing-Client-does-not-exist-in-authorizati...

  Greetings

• Suggestion of feature - shared custom signatures

  I would be cool to see a repository of custom users IPS signatures created and want to share with the community.

  For example how Cisco with EEM scripts...

  I like this idea as well.

  I have created a thread in the space of the forum "CSC Ideas" to discuss further and to expand on this topic.  All the answers it would be appreciated as well!

  https://supportforums.Cisco.com/thread/2061407