SIM card failure message

My wife is to get an error message of SIM on his iPad mini. Recently, he started doing after the latest iOS update... I removed the SIM card and reinstalled but still not the message. When she tries to look on the internet, it is up to the home page.

Pm1959 wrote:

My wife is to get an error message of SIM on his iPad mini. Recently, he started doing after the latest iOS update... I removed the SIM card and reinstalled but still not the message. When she tries to look on the internet, it is up to the home page.

Suggest to your cellular data provider to resolve the problem.

Tags: iPad

Similar Questions

  • No SIM card installed

    I know there are discussions on this subject but answers all explain how to get your SIM card is displayed. I don't have a SIM card. I don't want one. I bought a cell phone compatible iPad because I want the GPS. If I need to connect to the internet while I am away from home, I use my iPhone as a hotspot.

    My 3rd generation iPad gives me repeated "No SIM Card installed" messages while I use it. If he did only once at startup I understand, by why keep repeatedly remind me there is no SIM? I KNOW that there is no SIM.

    Oddly enough, my new iPad Pro, which does not have a SIM card, never gave me this message, not even at startup. Is there a way to stop doing on the generation iPad 3?

    Thanks in advance,

    Steve =: ^)

    Have you checked settings to see if the cell data is lit?

  • Atrix unlocked - how to skip the message SIM card is removed or changed?

    Hello!

    I just bought an Atrix 4 G unlocked at Amazon.com. The problem is that when I insert my SIM card and put the phone on the bellow message appears:

    SIM card is removed or changed. Log in to your MOTOBLUR account to unlock.
    
    MOTOBLUR ID:PASSWORD:
    

    I read another topic about a similar problem and someone suggested to activate wifi and try to connect with Motorblur, but since I don't have a Motoblur account, I do not think that it wotk out.

    Can someone help out me? I sent an email to the seller to Amazon too much because it might be a problem with unlocking...

    Thank you!

    Rita.

    It is possible that someone else creates a motoblur account on your atrix with another before SIM (for tests, etc.)

    Since you do not have your phone for a long time, I'd like you to try a factory zero; that should remove the old motoblur account.

  • To delete messages from SIM card

    I have the Xperia M4 aqua and I get the message saying that SIM card full erase messages. I followed the instructions according to the answer to someone else. But when I enter the e-mail settings and go to the SIM card, he mentions the messages but no option to delete! And I don't get the message voice icon now so missed a few important Messages! What is going on???

    @Meema58

    It was a bug in nexus

    https://productforums.Google.com/Forum/#! GqwmOj3DKns/nexus/subject

    Your operator can give you a new SIM card

  • Smartphones from blackBerry error message "Insert SIM Card"

    I can't get my phone to work due to the error message.  This is a brand new SIM card and should work.  I used a similar card a year ago for a blanket to Costa Rica, and it worked fine.  I took the battery and SIM card many times but also tried to disable the wifi but no luck.

    OK, then check this KB and see if something he recommends is to value:

    • KB10824 Data connection or insert SIM card rejected

    BTW - have confirmed that this specific BB is even compatible with the network of ice? For example, if the BB manages a set of frequencies still the carrier uses different frequencies, so there is nothing that can be done about it that the BB would simply not compatible with the ICE network. Note that I don't know the answer you need here... you will need find features in the frequency of the BB as well as those who use ice.

    Good luck!

  • BlackBerry Smartphones BlackBerry message memory and SIM card are full! Please delete some SMS messages.

    Hello

    typical - just that I was looking to upgrade, I get the following message on my Torch 9800:

    "BlackBerry message memory and SIM card are full! Please delete some SMS. »

    There is a lot of space on the card in the device memory and press. I have deleted many texts and have removed the battery (several times), but the error keeps coming back.

    I am able to text but can't seem to receive - although copies of text messages that I send continue to be saved. I'm having no problem with other forms of e-mail (for example, WhatsApp, Twitter).

    I looked at 3465 Knowledge Base, which advises to uncheck the option "Leave Messages on SIM card", but this has been disabled throughout. (I checked it and saved out of curiosity, which allowed me to receive text only test that I then just sent myself, but after the error message is returned and no other text would come through...) I came back to this area being disabled).

    Any help to fix this would be greatly appreciated.

    When you say you deleted text messages, how have you deleted and how do you think that you have?

    I suggest making a backup with BB Desktop Software. Then, you can use it to do a selective removal of just the basis of message text and see if you can receive messages after that. If you did the backup you can always restore text messages on the device if you want to, although he will crush all new messages on the device.

  • Smartphones blackBerry how to extract the text messages to sim card (7100)

    I sent and received texts before I found that I could put my BB not to keep texts on the SIM card

    I've got 6 here I would save but I can't understand anyway to do

    When I save the BB to fund manager messages don't are not there - I tried to 'depot' in various different folders on the SIM card, but it makes no difference

    Someone at - it ideas?

    Thank you

    Mike

    There is a third-party application that will send messages text for you, but other that that the only thing that you can do in native mode is to copy the text and paste it into an email and send it to yourself.

    Filing applies only to email BES (BlackBerry Enterprise Server) accounts.

  • Sim Card message for your fill of blackBerry Smartphones

    I recently bought a BB Bold 9000 and my SMS message Inbox is full already. Whenever I get a msg he asks to delete some messages to create space. Is there a way I can save all my existing msgs to my camera, my memory card and all entrants too?

    Salvation and Emille and welcome to the forums!

    Try to use this procedure

    SIM card is full please delete SMS messages"appears on the BlackBerry smartphone

    1. On the BlackBerry smartphone home screen, go to Options > SMS.
    2. Press the Menu key, and then click SMS options.
    3. Go to Leave Messages on the SIM card.
    4. Press the Menu key again, and then click Change Option.
    5. Select No.
    6. Press the Menu key, and then click Save.
    7. Open your Messages on the BlackBerry smartphone home screen, then press the Menu key.
    8. Navigate to the display folder in the menu.
    9. Select SMS SIM card Inbox.
    10. Remove any unnecessary messages SMS to create a space on the SIM card.

    Let is know how it goes!

    Thank you

    Bifocals

    Here is a practical guide to help navigate the menus of options

    It covers the device OS 4.5 to 6.0.

    How to navigate the Options menu on BlackBerry smartphones

  • Hello, I was able to import contacts stored on the sim card from my old phone, but not the short messages. How can I do this? Thank you!

    In addition, I was not able to receive MMS. But I can receive SMS.

    Currently, Firefox OS doesn't have the ability to import SMS from sim card. Sorry for the inconvenience

  • Built-in SIM card problem

    Anyone heading the question where they took contact with care of apple and the representative on the other end does not have the product you are calling for?

    I recently had to replace my iPad 9.7 Pro at a local Apple store warranty. There was a glimmer of hope in the quadrant display cooer right. It was not extreme, but once I have the sewing, my eyes always went straight to the it later. Given that the unit was only a few months, that I wasn't old too satisfied to "just deal with it" then I won him in and ultimately they replaced. There is one thing that I like Apple, they really take care of their customers. Then I proceeded to drive home and get on the phone with AT & T to activate it, because the iPad was originally purchased at home and put on my plan.

    After getting nowhere with AT & T customer service they transferred me to Apple Care because I didn't have an ICCID under settings/general/to words. After connecting the Apple Care representative I explained the problem. To my surprise, he had no idea on the SIM Apple integrated and kept asking me where was my old SIM and I need one to get cellular service. Now, I knew that this was not correct and I've tried very carefully explain that there is no SIM external it was enabled on the embedded SIM card, however, they guy fought me on it and sounded quite confused throughout the call. I also tried to activate it under the iPad option settings/cell/Add cell phone carrier/transfer again. This option does not work for me, because it has to do with a different plan type (I have or the representative didn't know) he says also my user name and password are incorrect, but it wasn't. I logged in full on the site without problem. As a result of this he told me to change my password for AT & T and that has not worked, it wouldn't have worked anyway, but now I know, it's just so that you can see the traces of events here. I was then left on hold for 15 minutes be say I have to call my service provider.

    Just for the forum of reference for the iPad all Pro (to the United States at least) are made with a built-in SIM card, but also have a nano SIM tray for travel abroad. For those who don't know no way "embarked", it is built in the electronic device and is not removable. Why do that and do all sorts of confusion? It is designed to allow a smaller unit and is supposed to give more options for the selection of a carrier.

    To resolve this problem, I took my replaced iPad 9.7 Pro at my local AT & T store the next day (today) to configure the built-in SIM card. They had me past in less than 5 minutes. Namely, if someone runs into his question, you need to tell the person you talking if theres no ICCID then its either one wifi device or if you are using a device with a built-in SIM card. They will have the provision to the CSN, which is a very long alphanumeric number located in settings/general/to comments made by verses the low only with the IMEI (obviously).

    I'm just surprised that the 'experts' Apple Care had no idea what the hell I was talking about. I am an engineer 'EM and work on industrial equipment. Also, I have a technical support for hardware, software, networks and applications, so I have a bit of history and know how to get my message. I too am a former user of Windows and Android who migrated to apple for its ease of use, robustness and quality, and outstanding customer service. I now own the iPad Pro, mini iPad 9.7 4, Apple TV (3rd generation) and Mac Mini (late 2014). All of which are excellent products that I use every day and that he loves her. I also participates actively in the public beta program Apple with iOS 10 and Sierra of MacOS. Apple, if you listen... Take note that when a supervisor does not know the iPad Pro is manufactured with a built-in SIM, theres a problem.

    What do you think?

    * Comments *.

    'Use the form below to send us your comments. Read us all the comments, but please note that we cannot respond to the comments you submit. »

    http://www.Apple.com/feedback/iPad.html

  • SIM card does not work in my camera

    I have an iphone 6 at & t carier but its own IMEI. I had asked at & t compony to unlock my device and compony approved my request but now when I insert any sim in my device then the phone shows no Service or research, what is this problem with my phone, please help me. Thank you

    No idea.

    What have you tried?

    You reset the iPhone?

    Restore you your iPhone and received the "congratulations your s iPhone unlocked" message, once AT & T sent you the notice?

    Have you checked your carrier in order to ensure that the SIM card is good?

  • SIM card is not supported in the activation

    I have a question about activating my iPhone with a different SIM card. I have an unlocked iPhone and I tried to use another (of another carrier) SIM card with it. However, the phone will not turn on and I got an error message indicating that the SIM card is not supported by the initial activation and it isn't a hardware problem. He advised me to call my carrier. So I called my operator and the customer support agent has confirmed that my iPhone is indeed open. Now I'm really confused as to why the other carrier's SIM card is not supported. All SIM cards I've tried with my current provider works with my iPhone. All other SIM cards from other telecommunications companies does not work (I tried 3 others).

    Then the phone is not unlocked. Have you asked an unlock of your carrier and they gave him? If Yes, do restore you the phone to factory with iTunes and receive a "congratulations, your phone is now unlocked" message? If this isn't the case, then the unlock code is not complete. You must restore the device with iTunes at the factory, not a backup. When you get the message "Congratulations", you can restore your backup.

  • How to insert the SIM card into the flame

    Hello

    I'm trying to put my SIM card in a phone of flame, but I don't know how to do it.

    I try to place the card in the slot, but the slot is higher than the card, I do not know if I put the card good or bad. The message still says "SIM not detected." Can I restart the device every time I slightly move the SIM card to force recognition?
    I have to do something else with the SIM card?

    PS: The flame brochure says in 2 different places ("see Insert or remove the SIM card '), but this article does not appear in the brochure.

    Hi xabitubbi,

    No, the flame device uses a SIM to normal size. Yours is a micro-SIM.

    You should contact your operator and ask for a normal size SIM card that fits on the device of the flame.

    -Ralph

  • Change of sim card to untie the old imessage with new imessage

    I sent a few imessages someone (e, g).

    -If I disable imessage.

    -So, if I change my SIM without changing my number and change my apple ID.

    -Then I dump imessage on the use of new apple id and the new sim card, but with the same previous number.

    Now, if I send imessage on A, a will receives imessage in previous messages page or another page.

    Imessages (imessage old and new imessage) will link together or not?

    If you disconnected iMessage, jumped into a new SIM card with a different number on this subject and enabled new iMessage [ID Apple not held] with this new number, a different conversation thread would start to Messaging. They will not bind together.

  • SIM card not valid, how to unlock using the carrier?

    I got an iPhone while I was in Canada with Fido and I used it for 2 years (my contract with them is over) but now I traveled to Costa Rica and my travel bag with Fido is finished thus and I now need to use a new Costa Rica SIM card but this is the message I got when I tried to install the new SIM card :

    "Invalid SIM".

    The SIM card that you have currently installed in this iPhone is a carrier that is not supported in the title of the activation policy that is currently assigned by the activation server. This isn't a problem with the hardware with the iPhone. Please insert a different SIM card of a carrier supported or to ask that this iPhone be unlocked by your operator. Please contact Apple for more information. »

    What should I do? I assumed that it was a good place to start to ask questions about it.

    You contact Fido and find out if they offer release and if this phone is eligible for it.

    Only the carrier that it has locked may authorize to release.

Maybe you are looking for

  • Thunderbird is already running but is not responding. To open a new window, you must close the current Thunderbird process, or restart your system.

    Thunderbird doesn't start and gives this message in a message window Thunderbird is already running but is not responding. To open a new window, you must close the current Thunderbird process, or restart your system. Any help would be appreciated.

  • Start page does not update after you run the update

    Run the update, on shows 9.0.1 and up-to-date... but everytime I open the browser, it shows that I'm behind and that you need to update? I refreshed, etc... always won ' accepts that I'm updating

  • B310 recognizing no more than 4 GB of Ram

    My B30 acknowledges no more than 4 GB of Ram, although Windows 7 Home Premium 64-bit and the motherboard maximum of 8GB. The link here confirms it: http://forums.Lenovo.com/T5/IdeaCentre-desktops-home-servers/processor-change/m-p/1070365/highlight/..

  • Make your own functions

    Hi, I want to create some sort of library, I mean, I want to create a list of vi that can be loaded in the palette of functions. I've seen the LLB container but seems this isn't what I want. Any ideas what am I looking for?

  • Use of the memory difference

    When I tried to check the difference in the VI memory usage when controls are up as icons and terminals. Surprisingly when I was using the controls in the form of icons the memory usage (see properties vi) is less than the controls when they are plac