SIM card reader/writer does not work?

Similar Questions

• I just put in a new hard drive in my computer and now my sd card reader slot does not work. How can I get my computer to read the SD card?

  Computer crashed

  New hard drive in my HP laptop

  Computer is not reading my SD card

  Hello

  Make sure the SD card works on other computers.

  The card reader is a USB device to ensure that other USB devices work.

  Check with HP, their drivers support and documentation online and ask in the forums of HP where it
  others will be with the same or similar model. I hope this is just the driver. It is possible that the device has been
  back not connected properly or even damaged when installing the new hard drive.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• CF/MD card reader camera is not working now

  CF/MD card reader camera does not work now. This has been "wobbily"from the beginning, but always worked til now. " There is no response when the card is inserted, and I found no way to update the driver - if this is the solution...

  What is the model of the camera and the reader?

  1 try to insert another card on the card reader to see if it works or try the card on another computer/card reader.

  2. the format of the memory card camera on the camera not on a computer, so that they cannot work by simply inserting a card reader.

  3. you can use the USB cable provided with the camera to connect to the computer. If the provided camera sofware is intalled on your computer, connect the camera and pressing the play button on the camera would have run the software and you will have access to your photos. Consult your manual on how to connect the camera to your computer. If you don't have the manual and the software, go to the support site for the manufacturer of your camera and you can download the software and the manual.

• subscription to adobe illustrator. With my money withdrawn credit card, but subscription does not work (and it doesn't work all day). What do I do?

  I made an annual subscription to adobe illustrator. With my money withdrawn credit card, but subscription does not work (and it doesn't work all day). What do I do?

  I read that it will take as much as 24 hours for a purchase to show your Adobe account

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• I got an iphone 4 to a friend in the Canada. I want to use it here in the Philippines as a regular iPad reserved for wifi, how can I use it without sim card? It does not pass the activation page. Help please?

  I got an iphone 4 to a friend in the Canada. I want to use it here in the Philippines as a regular iPad reserved for wifi, how can I use it without sim card? It does not pass the activation page. Help please?

  You can activate it without a SIM card. If it is locked, it takes a SIM card by the carrier, for it is locked. The SIM card should not be linked to an active line of service, but it must be present to activate it.

• Card player AutoPlay does not work. My two computers are networked. How can I fix it for automatic playback works?

  Card player AutoPlay does not work. My two computers are networked. How can I fix it for automatic playback works?

  Hello

  I suggest you to try the steps in the following Microsoft Help article and check if it works.

  Troubleshoot AutoPlay:

  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-AutoPlay-problems

  For more information, see the following link:

  http://Windows.Microsoft.com/en-us/Windows7/AutoPlay-frequently-asked-questions

  Hope the information is useful.

• ENE PCI Secure Digital / MMC Card Reader Controller does not

  ENE PCI Secure Digital / MMC Card Reader Controller does not

  I suggest that you go the manufacturer of your computers website and search for drivers chipset update.

  Click Start, type: Device Manager

  Press enter on your keyboard

  Click with the right button on the controller listed in the tree view of the devices

  Click on uninstall

  Restart your computer and let Windows redetect.

• my adobe reader software does not work properly always receive a message (not), why?

  my adobe reader software does not work properly always receive a message (not answer), then on the right Circle loading then suddenly stop and then become white background as shown below, why?

  I can't read any pdf file and I try to update the adobe reader and acrobat software, but nothing has changed.
  

  
  

  My (certainly old and slow) system made too the first time I opened 11 player, but he "thawed" after fifteen seconds, (an eternity in computing time, I know, but it has finally opened completely) what you see to the right is the "Tools" palette during initialization. That's exactly where mine would freeze at startup. Once he finally opened fully, I clicked on the "Tools" link at the top to close the Panel, and I opened and seen a document in this way and then closed reader. Now when I open the drive, the tool palette is not initialize and it opens immediately.

  Restart and prior to open what any else, open the drive. When you open it, DO NOT try to do anything with it until it fully opens, do not click on anything that it either, do not try to switch to another app give it time to open up completely and then click the tools link to close. Then open and view a document and close it. Close the player and reopen it. the tools Panel should stay closed and reader should open completely immediately.

• Satellite M45: Smart Media Card Reader SD does not

  Hello

  I have a Satellite M45, computer laptop, and for some reason any SD Smart Media system does not work. The Bay is attached to the laptop, it is not an external drive. I insert the chip SD, 1 GB or 512 mb not load disc, it, or show no signs of him being even in the computer.

  However, I see a blue light next to the Bay that happens when I plug a disk in it. But it reads nothing for some reason any. I tried already (repeatedly) to re - install the drivers, and then restart the computer, but nothing happens I get the same bad thing.

  You have and suggestions or ideas that might solve this problem of mine.

  Hello

  You you connected this external Bay USB ports?
  Did install the drivers for this external device?

  After the driver installation, please check the Device Manager if the external device appears.
  In addition, you can try to disable the option allow the computer to turn off this device to save power in the USB root hub properties.
  This you will also find in Device Manager

• I inserted the wireless network card, but it does not work on Satellite A30

  Hello please, be gentle, lol.

  I have a Satellite A30, no manuals, disks etc. of second hand.
  I had to buy a wireless card and installed it myself (error?).

  The card is an Intel P/N: PA3362U 1MPC.

  My is... have issue I installed it properly (see below), and can someone point me in the right direction for the correct driver?

  (Correct?) installation... .clipped perfectly in the slot in the compartment in the base of the laptop. Two sons rolled? one longer than the other?
  I plugged them as follows... more long wire to THE & shorter wire by HAND (on map)? Does this sound correct?
  How could I not if it works?

  The LED does not illuminate when the wifi switch is on?
  Is it normal when the driver not installed? FN + F8 has no effect? Again the ths is normal without driver installed?

  Thank you in advance, I'm completely stuck here... Matt

  Hello

  The PA3362U 1MPC seems to be a network wireless Intel PRO/Wireless 2200BG MiniPCI Type 3b card. I think it is s ok and should be compatible.

  The WLan driver should be found here:
  http://APS2.toshiba-tro.de/WLAN/
  Take the Intel PRO/Wireless 2200/2915 driver.

  > I plugged these as follows... more long wire to THE & shorter wire by HAND (on map)? Does this sound correct?
  I put t know which wire is short or long, but the two sons are different in color.
  Should the white cable goes to the hand and Brown to the auxiliary voltage

  See also this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=45273

  > How could I not if it works?
  Well, you will not be able to connect to the Wlan ;)

  > Is - this normal when the driver is not installed? FN + F8 has no effect? Again the ths is normal without driver installed?
  You should check if the other FN keys work correctly. If other n t FN keys work then Fn + F8 does not work too

  PS: you can activate the WLan also in Device Manager-> properties-> tab advanced Wlan card

  Welcome them

• Reading TCP does not work sometimes

  Hi all, I have a problem when my .exe build does not work on some computers, but works fine on others. It uses a tcp connection to grab data out of a custom server program that stores data bluetooth. The construction of program works fine on my development machine, but also another office, but on a 3rd computer code simply does read the data from the server. I have disabled the windows firewall, but I have no idea what else to try - someone has this problem before?

  That tells me that there is a driver that you have not installed on the other computer.  LabVIEW 2013 tries to automatically determine what drivers you need when you configure a Setup program.  This question does not sound as if she had something to do with TCP/IP.

• Card high speed does not work after installing Windows Service Pack for Vista

  I just installed Windows Service Pack for Vista and now my card Sprint high speed does not work.  The message I get is that the "peripheral No. is recognized. I was using the card top debit without any problems for over 6 months.

  What can I do to get this corrected.

  John

  Assuming that the Vista SP2...

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; ( Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows 8 reading list does not work with the programs desktop or web browsers in the Office

  * Original title: playlist of Windows 8

  Hello

  What a waste of time, this app is!

  -"Playlist does not work with programs office or web browsers in the Office! This raises the question: what will work with?

  I wish I knew.

  Thank you

  Chris

  Hi Chris,

  Playlist does not work with the programs office or web browsers in the design office.

  For more information, see the links.

  http://Windows.Microsoft.com/en-us/Windows-8/reading-list-app-FAQ

  http://Windows.Microsoft.com/en-us/Windows-8/share-to-reading-list

  Hope this information helps. If you have any questions, please let us know.

• My biometric reader device does not work.

  I accidentelly not unhooked the validity fingerprint sensor, not realizing I though I would help if I uninstall the device driver Biometic, who had a fingerprint as a logo and all reinstall on. Now, I reinstalled the validity fingerprint sensor but still does not work, I guess because I uninstalled the device driver Biometic. How can I get that back?

  Thank you.

  In terms of software and security, you can find your driver:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4132&LC=en&cc=us&DLC=en&sw_lang=&product=5359748#N1748

  otherwise here:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-109887-1&cc=us&DLC=en&LC=en&OS=4132&product=5359748&sw_lang=

• natural reading program does not work

  I bought this program, which once installed first gave errors in the administrator during the installation of a voice, he accepts no key code and fails to run, I guess it's to do with my system and not the program itself, but after a change of Director, under administrator uninstall, and reinstall the problem remains. Any ideas anyone.  (Win 7). Thank you.

  Hello

  I spent a week trying to fix the program, but nothing helps, the software company suggested to restore the file of documents on 'default' to solve the problem. It does not work.

  I have now re-installed the program again, and when I get to install the voice, I get error 1406, related to permissions.  The end result is the same, the key guard code reappear empty after I enter the code and try to run the program.  This suggests that the problem is due to my set up. Thank you very much.

  BGW