Simple failover PIX LAN question

Similar Questions

• Active/active failover configuration LAN-based PIX / ASA

  Hi all

  I would like to ask, if there is a restriction of length between the two ASA5510 in a LAN failover? Should not be, or I'm wrong?

  Thank you

  Norbert

  Hello

  normal duration of 100 m Ethernet. Or you can use the switches between them. I do not have a direct link.

  Best regards, Celio

• With the help of port security with Failover PIX

  Hello

  I want to configure port security on a switch in which a pair of PIX failover are configured. However, after

  http://www.Cisco.com/univercd/CC/TD/doc/product/LAN/cat6000/12_1e/swconfig/port_sec.htm

  It seems that this is not possible due to the PIX swapping MAC addresses: "If a workstation with a secure MAC which is configured or learned about a secure port address tries to access another secure port, a violation is marked."

  Does anyone know of a way around this?

  Many thanks in advance,

  Matt

  Hello Matt,

  Unfortunately it not there no work around to your problem.

  Thank you

  Renault

• VPN on PIX Newbie question

  Hello

  I need to create a site to site VPN, I have in mind a PIX 515e. Behind it is a network of win2k with a domain controller for authentication. Users of the remote site must be attached to authenticate to this DC via a VPN.

  The two sites to connect to the internet by modem cable and the remote site will have up to 10 users behind the PIX/VPN.

  Here are my questions:

  What kind of material PIX the remote site needs? A 501/506, or something else.

  Do I need a VPN concentrator, etc. to the head of line?

  How the hell i make it work?

  Sounds simple right? I appreciate a lot of help because I am a little confused. Thanks in advance.

  Marc

  Hello Mark,

  Here is an example of PIX to PIX VPN using IPSec:

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a0080094761.shtml

  In addition, many more examples here to get you go, all TACS is the author:

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/prod_configuration_examples_list.html

  Hope this helps - Jay

• Adapter LAN question, "no access to the network.

  Original title: LAN adapter issue

  Hi all, when connecting my laptop to a switch of the LED on the switch is green which means connected. The IP address on the laptop is entered manually, but when will the cmd and issue ipconfig it shows "media disconnected" and the network adapter in the Control Panel indicates "no access to the network. It also indicates that "this device is working propoerly! Please advice

  Hello

  What is the number and the model of the computer?

  Remember to make changes to the computer before the show?

  Thanks for posting in Microsoft Communities.  The problem description, I understand that you can not connect to the Internet.  Correct me I misunderstood the question

  Follow these steps:

  Method 1: Follow these steps:
  How to troubleshoot possible causes of Internet connection problems in Windows XP: http://support.microsoft.com/kb/314095

   

  Method 2: Follow these steps:

  
  Step 1: renew DHCP Dynamic Host Configuration Protocol)
  a. click Start, click run, type cmd and click OK.
  b. in the command prompt, type ipconfig / renew
  c. Close command prompt.
  d. check the result.

   

  Step 2: Try to obtain an IP address automatically
  a. open Internet Explorer, go to Tools, click on Internet Options, connections, LAN settings.

  b. uncheck all boxes except automatically detect connection settings
  c. click OK to apply the changes.
  d. check if the problem persists.

   

  Method 3: If the methods above do not help, check if the wireless card is very well and try to update the drivers on the manufacturer's Web site.

  a. click Start and right-click my computer.
  b. Select Properties and then click the hardware tab.
  c. click on Device Manager and expand network adapters in the list.
  d. right click on the adapter, then click Properties.
  e. click the driver tab and click Update the driver.

  Please follow the steps and let us know if this helped.  If the problem persists, answer and we will be happy to help you.

• Replication failover PIX VPN (CEP) certificate

  Hello

  Had a pair of PIX 525 on 6.3 (4) version running in active/failover mode, I recently configured VPN authenticated by certificates, which involved the use of PRACTICE in order to get the certificate to the PIX. Certificates have been imported for the PIX from a snap-in with the software component CEP Protocol Windows CA server by following the instructions described here: http://www.ciscosystems.com/en/US/docs/security/pix/pix63/configuration/guide/sit2site.html#wp1007263 .

  It all works very well, the configuration has been saved, certificates registered cases using "ca save all", everything works well except the certificates that have been imported have not been replicated for the PIX failover - the command 'Show the ca certificate', shows not all certs.

  Private keys show 'sh ca mypubkey rsa' are the same on both devices.

  I'm not able to find any documentation about how certificates must be replicated on the PIX failover, and it is not possible to write certificates again on the PIX failover using the commands they were initially imported by:

  PIX - fw # conf t
  WARNING *.
  Configuration of replication is NOT performed the unit from standby to Active unit.
  Configurations are no longer synchronized.

  PIX - FW (config) auth ca ca
  WARNING *.
  Configuration of replication is NOT performed the unit from standby to Active unit.
  Configurations are no longer synchronized.

  Everyone knows a similar issue or how to get the PIX failover with the new ca certificates?

  Kind regards

  Sarunas

  Hello Sarunas

  PIX 6 indeed do not synchronize keys and certificates automatically.

  However, you should be able to do this first, forcing a failover (i.e. secondary image make it active), then register (now active) high school with the certification authority.

  HTH

  Herbert

• VPN inside a PIX (General Questions)

  Hello

  I'm trying to implement a scenario of communication between a customer inside a pix that talks to a server on the outside. The customer must have an ipsec inside connection. I have the following config and a few questions I´d be very happy to get an answer for...

  Backup on the interface outside the security0 Server

  Client safety within 100 interface

  The client IP address is 200.200.212.194

  backup server address is 200.200.202.201

  I want to implement a VPN client connection to the inside interface, and therfore have implemented the following configuration.

  external IP 200.200.202.200 255.255.255.0

  IP address inside 200.200.212.193 255.255.255.192

  access-list 100 permit host 200.200.202.201 ip 10.3.3.0 255.255.255.0

  IP local pool privada 10.3.3.1 - 10.3.3.254

  Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT

  Crypto-map dynamic dynmap 10 transform-set RIGHT

  map mymap 10-isakmp ipsec crypto dynamic dynmap

  client configuration address map mymap crypto initiate

  client configuration address map mymap crypto answer

  mymap map crypto inside interface

  ISAKMP allows inside

  ISAKMP key * address 0.0.0.0 netmask 0.0.0.0

  ISAKMP identity address

  part of pre authentication ISAKMP policy 10

  ISAKMP policy 10 3des encryption

  ISAKMP policy 10 sha hash

  10 2 ISAKMP policy group

  ISAKMP life duration strategy 10 86400

  vpngroup address private pool PRIVADAGROUP

  PRIVADAGROUP vpngroup password *.

  vpngroup split tunnel 100 PRIVADAGROUP

  I have a few questions about this configuration maybe some kind soul able to respond.

  1. the VPN clients receive an address (10.3.3.1) for example through the IKE negotiation. When I ping my server from the client with the active VPN tunnel I assume the real package that passes through the wire has 10.3.3.1 a source address and a destination of 200.200.212.193 (endpoint the VPN and inside interface). Within IPSEC, the package is my real ip with a source 200.200.212.194 address (address of the real client) and a destination address of 200.200.202.201 (address of the backup server that I am trying to ping). If all this makes sense and is correct could you confirm the following point.

  2 when the PIX deencrypts the package and removes the IPSEC header I find myself with my IP packet of origin with a source 200.200.212.194 address (address of the real client) and a destination address of 200.200.202.201 (address of the backup server that I am trying to ping). I don't know if I need then the following configuration to allow the package to be transferred to the backup without NAT server:

  access-list allowed sheep host ip 200.200.212.194 255.255.255.0 200.200.202.0 255.255.255.0

  NAT (inside) 0 access-list sheep

  I was previously using the following configuration and it seemed to work but the more I think the less sense it seems to do as I´d wait for the SENATE to run on the dencypted package. I must be missing something or confused, or both.

  IP 10.3.3.0 allow Access-list sheep 255.255.255.0 200.200.202.0 255.255.255.0

  NAT (inside) 0 access-list sheep

  3. as a last and probably least I m pretty sure I don't have to line "isakmp key * address 0.0.0.0 netmask 0.0.0.0" when connecting with a VPN client software only. Somone can confirm that for me.

  I'm actually trying to get this to work remotely with someone else doing the actual work and we don't speak the same language.

  Any help to store my confused brain would be appreciated.

  1. No, it's the other way around. The real package that passes through the wire has the address IP of the PC (200.200.212.194) as a source. Within the IPSec packet is allocated 10.3.3.1 as source IP address. When the PIX decrypts the packet, the outer header is removed, and the package has a source of 10.3.3.1 as it is sent to your server on the outside. The external server will respond to 10.3.3.1 so it must be routed to the PIX for her to work.

  Think of this as the normal instance with the PC to the outside through the Internet. A package from of and sent to 10.3.3.1 would never do to the original PC. The encrypted IPSec packet always contains the VPN endpoints real IP source and destination addresses. The decrypted original deck contains allocated as source IP and the actual destination as destination (usually also a private address) computer.

  2. This should make more sense now that you know the answer to 1.

  3. you don't need that if you have a "vpngroup password xxxx" command. This command «isakmp key...» "If there is no specific vpngroup key, or someone connects with a different groupname.

• Configuring PIX Cisco Question - very limited info. Sorry!

  People,

  Have been put to me a quetsion on a Cisco PIX (I don't know what model it is) who I know very very limited. The person asked me the question, is to help someone else! I apologize in advance for the lack of information here, but Im hoping that someone who has expertise in PIX experts will be able to diagnose the problem, or ask the question to the bottom of the chain to address this problem. The question they asked me: -.

  "Can't get NAT works correctly between the demilitarized zone and other ports.

  I know that it is very skectchy, but because I'm not a firewall or security Im not sure what I want or what questions I need to ask. I have however a copy of the config, if someone can help, we'd really appreciate it.

  Config is attached.

  I think that the above is not a problem.

  However, here it is a question;

  static (dmz1, external) 20.20.20.252 switch1 netmask 255.255.255.255 0 0

  static (dmz1, external) 20.20.20.22 switch1 netmask 255.255.255.255 0 0

  I think it should be;

  static (dmz1, external) 20.20.20.252 switch1 netmask 255.255.255.255 0 0

  (dmz1, external) 20.20.20.22 static nlbweb1 netmask 255.255.255.255 0 0

  Let us know if this can help,

  Paul

• Simple analysis of design Question before designing dimensions and facts

  Hi I have a simple question... (I think its simple)
  
  Suppose I have the following intermediate table with the following columns:
  
  ---------------------------------------------------------------------------
  Student_Name | RollNo. Test_Date | Object-plug
  --------------------------------------------------------------------------
  with data such as
  Kevin | 123 | 04/12/2010 | Physics
  
  Now suppose I want to create a cube based on the above table so that I can successfully get the result of a query like
  
  List the names of all of those students who took the test b & w 04/12/2010 on 2010-12-05 of Physics of matter
  
  Here, what I need to know what size/levels would be u together and what would be our doing?
  
  I think that one dimension would be time ( , but I don't know how I would like to welcome and manage duration... no idea )
  would it not be wise to make each column a dimension? for example the student_nanme dimension and the details of the student attribute?
  
  in any case the key is what bothers look me at the query, we see that we are required to 3 things the name of the student and the TestDate, subject pulled so if I do 3 columns the size I'm still not sure that I would be able to accommodate the request properly... any ideas on how to address and manage these situations
  
  Published by: Johnacandy on December 14, 2010 09:26

  Dimensions: STUDENT, TEST_DATE (role of TIME dimension) and OBJECT/CLASS.

  Yet you did not mention the measures, perhaps TEST_RESULT? If this isn't the case, it's a factless fact table.

• IE 10 WIN 7 Simple pass Log in question.

  I use Simple fingerprint passes to connect to websites, but Simple past is not displayed for the automatic update of IE 10.  Please notify.

  HP Pavilion dv6 Notebook PC

  64-bit OS WIN 7

  6 GB OF RAM

  Processor: AMD A8 - 3520M APU

  Publishes them 25 October 2013 - updated the link HP SimplePass, added a link to the document SimplePass update

  Open the SkyDrive link - locate and open the file named:

  Simple Instructions for upgrade HP SimplePass

  Text of the original message:

  SD,

  You want to make sure you're on the latest version of HP SimplePass.

  As long as you use NOT of Digital Persona, this fix should work.

  ------------------------------------------------------------------------------

  Open Control Panel > Device Manager > open biometric devices >

  Right click on your validity sensor driver > uninstall ( NOT delete)

  Reboot the laptop in a way the pilot can relocate that you connect to

  ------------------------------------------------------------------------------

  Download this new package SimplePass and double-click it to install just above your current version - that is to say, do not remove your software SimplePass existing, just load this version on top of what you have now.

  sp63224 HP SimplePass V6.0.100.276 Win7-8

  =====================================================================================

  Dragon tips:

  • Save (Export) your webcards:

  Export the Webcard database:

  When you have working software SimplePass, export your Webcards.  In the case where you must remove the SimplePass software, your webcard backup can be used (imported) to restore your Web site login information.

  SimplePass start > settings > export NOTE: file will be called *.tsd

  This is backup every so often and save it somewhere safe.  If you need to remove your HP SimplePass software, you can use the .tsd file to import your Web sites / passwords after you reinstall and configure HP SimplePass.

  =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

  Click on the star of congratulations !

  It's a big 'thanks' for the HP Experts, who are there to help!

• Example of simple background thread and question - please help

  I have finally updated a list via a web services call field without blocking the loading of a screen.

  I want to the loading screen, put a "Please wait" in a field, and then replace the listfield by the vector of calling web services.

  I wrote the simple example below just to see if I have the basics, and I guess that I don't have.

  My label never changes to 'done '.

  I'm sure it's something Liberty fabrics I have left.

  import net.rim.device.api.ui.UiApplication;
  import net.rim.device.api.ui.component.LabelField;
  import net.rim.device.api.ui.container.MainScreen;
  
  public class HomeScreen extends MainScreen
  {
      LabelField lf;
      private Runnable runnable;
  
      public HomeScreen()
      {
          lf = new LabelField("Begin");
  
          runnable = new Runnable() {
              public void run()
              {
                  lf.setText(test());
              }
          };
  
          this.add(lf);
          UiApplication.getApplication().invokeLater(runnable);
      }
  
      String test()
      {
          try {
              UiApplication.getUiApplication().wait(1000);
          } catch (InterruptedException e) {
              // TODO Auto-generated catch block
              e.printStackTrace();
          }
          return "Finished";
      }
  }
  

  No, an executable is retired after his execution.

• PIX OSPF question load balancing

  I have a pix 515e with two default routes, via OSPF from two routers on the "outside" interface

  Route #2 is currently being preferred spending much more than the #1 router. There are thousands of destinations for traffic. These two routers are still NAT nat rfc1918 IP Internet (the pix doesn't nat)

  Can you get it someone please let me know how the PIX is load balancing? is it by destination IP address? is it something else?

  Thank you

  Joe

  TAC:

  "the PIX will be per destination load balancing instead of by package

  load balancing. The algorithm will look at the source and destination

  addresses. It is not 1:1 load balancing. Given quite different

  the source address and destination, the packets will reach more or less one

  spindle of 50-50 between the two next-hops. However, in the real world test

  with the same source and destination addresses, it may not reach the same

  load balancing. »

• PIX, wiring question

  Hello

  We currently have a Pix of the 506th, int external ethernet is connected to our 1720 router ethernet int using a crossover cable. We are trying to replace the 506e with a 515e. In the quick start guide that it is said to use one of the provided patch cables. If someone could confirm the good cable for use between the 515e and the 1720 and also if the connection by using a passive filter would have a significant impact?

  Thank you very much

  J Mac

  You need crossover cable between the router and PIX,

  Use a crossover cable when connecting as devices such as the transition to a switch or a PC to a PC... PIX interface is as NETWORK card in your PC so if you connect PIX interface directly to the router (or directly to the PC) you have to crossover, if you connecting PIX to pass you need straight cable...

  M.

  Hope that helps the rate if it isn't

• PIX 501 question?

  Hello

  I have a PIX 501 and received 1 single public IP address from my ISP and I need to access a server on the private network of outside (Telnet or FTP).

  How to translate the Private IP of the server to the public ip address for the external interface of the firewall and specifying the port ftp or telnet only? is this possible?

  Thank you

  The pleasure is mine.

  Click rate if you found the post useful.

  sincerely

  Patrick

• PPTP VPN pix 501 question

  I'm relatively new to the security stuff.  I'm a guy of the voice.  I created a Pix 501 for IPSEC VPN and works very well.  Then I tried it setting up PPTP VPN.  I use Windows XP to connect.  It connects fine, but I can't ping to the inside interface on the PIX.  I can do this by using IPSEC.  Any ideas?   Here is my config:

  :

  6.3 (3) version PIX

  interface ethernet0 car

  interface ethernet1 100full

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  activate the password * encrypted

  passwd * encrypted

  host name *.

  domain name *.

  fixup protocol dns-length maximum 512

  fixup protocol ftp 21

  fixup protocol h323 h225 1720

  fixup protocol h323 ras 1718-1719

  fixup protocol http 80

  fixup protocol pptp 1723

  fixup protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol sip 5060

  fixup protocol sip udp 5060

  fixup protocol 2000 skinny

  fixup protocol smtp 25

  fixup protocol sqlnet 1521

  fixup protocol tftp 69

  names of

  access-list 101 permit icmp any any echo response

  access-list 80 allow ip 10.0.0.0 255.255.255.0 192.168.5.0 255.255.255.0

  access-list ip 10.0.0.0 sheep allow 255.255.255.0 192.168.5.0 255.255.255.0

  access-list ip 10.0.0.0 sheep allow 255.255.255.0 192.168.6.0 255.255.255.0

  pager lines 24

  opening of session

  emergency logging console

  Outside 1500 MTU

  Within 1500 MTU

  IP address outside of *. *. *. * 255.255.255.0

  IP address inside 10.0.0.1 255.255.255.0

  alarm action IP verification of information

  alarm action attack IP audit

  IP local pool pool1 192.168.5.100 - 192.168.5.200

  IP local pool pool2 192.168.6.100 - 192.168.6.200

  history of PDM activate

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0 access-list sheep

  NAT (inside) 1 10.0.0.0 255.0.0.0 0 0

  Access-group 101 in external interface

  Route outside 0.0.0.0 0.0.0.0 *. *. *. * 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  RADIUS Protocol RADIUS AAA server

  AAA-server local LOCAL Protocol

  the ssh LOCAL console AAA authentication

  No snmp server location

  No snmp Server contact

  SNMP-Server Community public

  No trap to activate snmp Server

  enable floodguard

  Permitted connection ipsec sysopt

  Sysopt connection permit-pptp

  Sysopt connection permit-l2tp

  Crypto ipsec transform-set high - esp-3des esp-sha-hmac

  Crypto ipsec transform-set esp - esp-md5-hmac RIGHT

  Crypto dynamic-map cisco 4 strong transform-set - a

  Crypto-map dynamic dynmap 10 transform-set RIGHT

  Cisco dynamic of the partners-card 20 crypto ipsec isakmp

  partner-map interface card crypto outside

  card crypto 10 PPTP ipsec-isakmp dynamic dynmap

  ISAKMP allows outside

  ISAKMP key * address 0.0.0.0 netmask 0.0.0.0

  ISAKMP nat-traversal 20

  part of pre authentication ISAKMP policy 8

  ISAKMP strategy 8 3des encryption

  ISAKMP strategy 8 md5 hash

  8 2 ISAKMP policy group

  ISAKMP life duration strategy 8 the 86400

  vpngroup address pool1 pool test

  vpngroup default-field lab118 test

  vpngroup split tunnel 80 test

  vpngroup test 1800 idle time

  Telnet timeout 5

  SSH 10.0.0.0 255.0.0.0 inside

  SSH 192.168.5.0 255.255.255.0 inside

  SSH 192.168.6.0 255.255.255.0 inside

  SSH timeout 5

  management-access inside

  Console timeout 0

  VPDN PPTP-VPDN-group accept dialin pptp

  VPDN group PPTP-VPDN-GROUP ppp authentication chap

  VPDN group PPTP-VPDN-GROUP ppp mschap authentication

  VPDN group PPTP-VPDN-GROUP ppp encryption mppe auto

  VPDN group VPDN GROUP-PPTP client configuration address local pool2

  VPDN group VPDN GROUP-PPTP client configuration dns 8.8.8.8

  VPDN group VPDN GROUP-PPTP pptp echo 60

  VPDN group VPDN GROUP-PPTP client for local authentication

  VPDN username bmeade password *.

  VPDN allow outside

  You will have to connect to an internal system inside and out run the PIX using pptp.

  For ssh access the PIX, you will also need additional configuration, see the section on code PIX pre 7.x, section access ssh to the security apparatus .

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a008069bf1b.shtml#C4

  Concerning