Configuring PIX Cisco Question - very limited info. Sorry!

Similar Questions

• Very limited iTunes

  So, I recently installed Itunes 12.4.1.6 under Windows, and as with every update to Itunes, I have to go back and everything set up so that I have it in a layout I prefer.  However, with this 12 of Itunes, I find it is extremely limited.  I have a point of view of my library and album reviews.  I can't view my library as a list of all of my music in the order.  It makes it extremely tedious going through each album individually.   I've seen videos on how to put these back views, but my Itunes doesn't have the options I am told to use.  I have no tab playlist at the top where it is normally with my Itunes Store Radio Music, etc... I have no drop-down list to be considered as lists or songs...  This is what im stuck with, a very limited version of itunes?  Or is there a way to bring these options?  I really grew up in Itunes, I'm feeling just with each update of the product I am being led to do not want to use it.

  Display > display the sidebar.

  Select "Songs" instead of "Albums".

• Satellite A200-1AX: Win7 has very limited screen resolution

  ?:| Can someone help me please?

  I have a SCREEN RESOLUTION (1280 x 800) after that I went to w7, before I can get about 1600 x 1280 when I was in very limited vista. I lost my vista recovery disk so I decided to go with w7, but after that I did some installations/updates to update for all my drivers again my screen resolution gives me the size 1280 x 800 maximum.
  Anyone? Please? I need your suggestions...

  -J' have a Satellite A200 1AX (recently moved from vista to w7)
  -Screen: 15.4 "
  -My graphics card is ATI Mobility Radeon HD2600.
  -I just downloaded the latest driver from ATI.

  Please tell me what I'll do.
  Thanks in advance guys...: D
  Jeje

  > Until I can get around 1600 x 1280 when I was in vista
  I can't believe that why?
  Because the screen internal 15.4 "WIDE XGA supports a maximum resolution of 1280 x 800.
  Max which is possible on the internal display, and as a result, you will not be able to choose a higher resolution on the internal display.

  The resolution of the external display may be higher but not the resolution of the screen internal.

• Fails to PI 2.0 Configuration Archive Cisco Nexus 5000

  Hello

  We have recently improved Cisco IP from 1.3 to 2.0 and I thought that this problem would be resolved, but he did not. I added two switches 5548 Nexus I can monitor and configure via Cisco first but I am not able to read the boot och running configuration to the Configuration Archive. When I start work, I get the following error:

  "device fig: java.net.SocketTimeoutException: Read timed out".

  Current NXOS: 5.2 (1) N1(2a)

  Before troubleshooting I would just answer if it should be possible to archive the Nexus to Cisco configs first Infrastructure?

  See you soon! Mattias Andersson

  Yes, I do it with success on a couple of first 2.0 facilities. My case later included NX - OS - 5548UP and 5596UP 5.2 (1) N1 (4) running and 6.0 (2) N2(1b).

• Are there improvements for photoshop affect problem of fonts? the fonts are very limited and can not download of new fonts!

  The fonts are very limited and cannot be upgraded. We are looking for the ability to download fonts, maybe google.

  Thank you.

  PS touch is not available more since May. If adobe does more maintenance. They promised a new application with the same functions end of 2015. I've not yet seen.

• MS NLB Multicast configuration on Cisco Bladecenter switches mode

  We seek to MS NLB Multicast configuration on Cisco Bladecenter switches mode. We are adding static ARP and CAM entries for each port on the switches kernel that

  the Bladecenters are connected to, or just the port of the virtual machine arrives at

  push traffic at this time here? If we add it to a single port,

  How vmotion will work... because it seems that we have to manually

  transfer the arp from one port to the other entry.

  We add the static ARP entry to the entire Cisco switch. If you can VMotion VMs NLB to another host that is physically connected to another switch, then this switch have thus added ARP entry. We have not tested the configuration only on the specified ports. But if you do, make sure that you include all the ports connected to the physical switch (if for DS you have four natachasery configured in a vSwitch...).

  Here's a guide to how we have configured it several times in our society.

  http://www.VI-tips.com/2009/04/NLB-in-VMware.html

• Internet very limited - access download

  I am now a member complete creative cloud. Download the full package of Master Collection Creative Suite cloud for easy install on my computer? I have very limited internet for work computer. I can get broadband from somewhere else and would like to download the package from here and then take to the work computer to install. Is this possible? Or is it possible to ask the software on the drive?

  There are no disks. For CS6, you can always download trial versions:

  Direct download links for Adobe software

  How this will be handled for the new versions of CC, I don't know yet. This is one of my biggest concerns with all...

  Mylenium

• help in the very limited troubleshooting network environment

  Looking for any help you might be able to give me with this one.

  Recently upgraded from Flash CS3 to Flash CS5 Pro. When I publish a movie produced exclusively with CS5, the resulting SWF will work everywhere, but inside my company very limited/locked network. When I try to load the SWF in a browser from the network, all I get is what appears to be the standard Flash preloader - 5 small points that crawl through the middle of the screen.

  I have confirmed, there is no version of IE error, the machines have the latest version of Flash Player; the only difference is the network.

  What could prevent the SWF file to the browser? Is there any setting esoteric edition, that I can use in CS5 pro I should try?

  Thanks in advance!

  don't use no tlf textfields (unless you use a feature of them unavailable), or publish the framework has merged into the code or download the framework on your server.

• Questions of VLAN and configuration for Cisco AIR-CT2504-25-K9 Controller

  Hello

  It's my first time thanks to the Cisco wireless solutions, so I was hopping someone could help me with the following:

  We just bought the AIR-CT2504-25-K9 controller with some points of access for the AIR-CAP1702I-E-K9.

  The network is as follows:

  Peripheral layer 3 (managed by third parties): it's on the domain network. (VLAN by default, 1 - unidentified)

  ADSL router - it's the network without comment thread. (Default Vlan 4 - tagged).

  VOIP: VLAN 5.

  Both fittings go into a switch Cisco SG500 52 (Layer 2). There is a port to shared resources on the switch SG500 with VLAN 1 (Tagged) and VLAN 4 (with tag). The WLAN controller is plugged into this port trunking.

  The data and management network are in the same subnet and on the same VLAN (1).

  I used the wizard on the controller setup.

  There are three interfaces:

  management VLAN ID 1 IP 192.168.1.2 Port 1 (configured with a gateway domain network, DHCP, etc.).

  VLAN wireless identifier 4 IP 192.168.5.1 Port 1 comments (configured with modem router ADSL, DHCP, etc.).

  Virtual IP 192.0.2.1

  Proxy DHCP active overall.

  There are two wlan networks:

  (1) area - management Interface - SSID abc.

  (2) comments - comments Wireless Interface - SSID xyz (the wizard put to management, but I changed it to the wireless).

  Are the AP connected to another SG500 switch which is shared resources to the switch with the controller.

  Ports of the APs are connected to have only 1 VLAN unidentified. They don't have 4 VLAN Tag or not identified. However, everything seems to work as expected.

  When I join the guest network (SSID xyz), I get an IP address from the router ADSL and all Internet traffic goes through him. When I connect to the domain network (SSID abc), I get an IP address from the DHCP in Windows Server and all traffic goes through the device of layer 3 (I checked the public IP address in my browser). I can't ping anything from one network to the other.

  My questions are the following:

  (1) how the guest network traffic (VLAN 4) headed the APs controller when they are connected to the ports on VLAN1? Is it because the traffic is encapsulated?

  (2) is set up correctly? After you configure the controller, I saw a note in the forums, this State I can simply enter 0 for the management of VLANS to let it not identified. However, in my case, I kept it as 1, which is the same as the switches and then the tag VLAN on the switch. In addition, the set Wizard wlan of comments to use the management interface but I changed it to use the comments interface.

  (3) when I connect to the APs of the controller, I see several options that can be configured manually. Is it necessary for this? For example, there is an option of data encryption.

  Thank you

  A

  Hello

  (1) how the guest network traffic (VLAN 4) headed the APs controller when they are connected to the ports on VLAN1? Is it because the traffic is encapsulated?

  Yes, I'm with CAPWAP:

  More information: http://lets-start-to-learn.blogspot.de/2014/08/cisco-wireless-understand...

  (2) is set up correctly? After you configure the controller, I saw a note in the forums, this State I can simply enter 0 for the management of VLANS to let it not identified. However, in my case, I kept it as 1, which is the same as the switches and then the tag VLAN on the switch. In addition, the set Wizard wlan of comments to use the management interface but I changed it to use the comments interface.

  If you want that mgmt interface must be unmarked and then put 0 otherwise you can use vlan 1.

  I do not have what is configured under mgmt and comments interface, but according to the name I'll say yes, you must set the comments under comments wlan interface.

  (3) when I connect to the APs of the controller, I see several options that can be configured manually. Is it necessary for this? For example, there is an option of data encryption.

  Yes, there are many things that you can configure, but I'll leave most of the default of things unless you really need to change!

  The following best practices: http://www.borderlessccie.net/?p=270

  Concerning

  Remember messages useful rates

• (Maybe stupid) Question about ASDM configured PIX PIX VPN

  I have two PIX515 running v7.2 (1) and ASDM 5.2 (1).

  If I use the VPN Wizard of the ASDM to configure a site to site VPN, this process takes care of the need to create split tunnel parameters, so that the outgoing traffic non - VPN inside each PIX is managed properly?

  Hello

  By default, all client VPN traffic is encrypted and sent to the VPN server, Split tunneling is used for client vpn remote to exempt a particular traffic to be encrypted and tunnel to the VPN server so that the traffic will be sent in parallel to the internet or local.

  During the configuration of site to site intuitively that when the configuration of the remote networks on both sides that communicate together by the IPSec tunnel and all other traffic is routed to their destinations without encryption.

• PIX: Cisco VPN Client connects but no routing

  Hello

  We have a Cisco PIX 515 with software 7.1 (2). He accepts Cisco VPN Client connections with no problems, but no routing does to internal networks directly connected to the PIX. For example, my PC is affected by the IP 172.16.2.57 and then ping does not respond to internal Windows server 172.16.0.12 or trying to RDP. The most irritating thing is that these attempts are recorded in the system log, but always ended with "SYN timeout", as follows:

  2009-01-06 23:23:01 Local4.Info 217.15.42.214% 302013-6-PIX: built 3315917 for incoming TCP connections (172.16.2.57/1283) outside:172.16.2.57/1283 inside: ALAI2 / 3389 (ALAI2/3389)

  2009-01-06 23:23:31 Local4.Info 217.15.42.214% 302014-6-PIX: TCP connection disassembly 3315917 for outside:172.16.2.57/1283 inside: ALAI2 / 3389 duration 0:00:30 bytes 0 SYN Timeout

  2009-01-06 23:23:31 Local4.Debug 217.15.42.214% 7-PIX-609002: duration of disassembly-outside local host: 172.16.2.57 0:00:30

  We tried to activate and deactivate "nat-control", "permit same-security-traffic inter-interface" and "permit same-security-traffic intra-interface", but the results are the same: the VPN connection is successfully established, but remote clients cannot reach the internal servers.

  I enclose the training concerned in order to understand the problem:

  interface Ethernet0

  Speed 100

  full duplex

  nameif outside

  security-level 0

  IP address xx.yy.zz.tt 255.255.255.240

  !

  interface Ethernet1

  nameif inside

  security-level 100

  172.16.0.1 IP address 255.255.255.0

  !

  access extensive list ip 172.16.0.0 inside_nat0_outbound allow 255.255.255.0 172.16.2.56 255.255.255.248

  !

  access extensive list ip 172.16.0.0 outside_cryptomap_dyn_20 allow 255.255.255.0 172.16.2.56 255.255.255.248

  !

  VPN_client_group_splitTunnelAcl list standard access allowed 172.16.0.0 255.255.255.0

  !

  IP local pool pool_vpn_clientes 172.16.2.57 - 172.16.2.62 mask 255.255.255.248

  !

  NAT-control

  Global xx.yy.zz.tt 12 (outside)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 12 172.16.0.12 255.255.255.255

  !

  internal VPN_clientes group strategy

  attributes of Group Policy VPN_clientes

  xxyyzz.NET value by default-field

  internal VPN_client_group group strategy

  attributes of Group Policy VPN_client_group

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list VPN_client_group_splitTunnelAcl

  xxyyzz.local value by default-field

  !

  I join all the details of the cryptographic algorithms because the VPN is successfully completed, as I said at the beginning. In addition, routing tables are irrelevant in my opinion, because the inaccessible hosts are directly connected to the internal LAN of the PIX 515.

  Thank you very much.

  can you confirm asa have NAT traversal allow otherwise, activate it in asa and vpn clients try again.

  PIX / ASA 7.1 and earlier versions

  PIX (config) #isakmp nat-traversal 20

  PIX / ASA 7.2 (1) and later versions

  PIX (config) #crypto isakmp nat-traversal 20

• VPN inside a PIX (General Questions)

  Hello

  I'm trying to implement a scenario of communication between a customer inside a pix that talks to a server on the outside. The customer must have an ipsec inside connection. I have the following config and a few questions I´d be very happy to get an answer for...

  Backup on the interface outside the security0 Server

  Client safety within 100 interface

  The client IP address is 200.200.212.194

  backup server address is 200.200.202.201

  I want to implement a VPN client connection to the inside interface, and therfore have implemented the following configuration.

  external IP 200.200.202.200 255.255.255.0

  IP address inside 200.200.212.193 255.255.255.192

  access-list 100 permit host 200.200.202.201 ip 10.3.3.0 255.255.255.0

  IP local pool privada 10.3.3.1 - 10.3.3.254

  Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT

  Crypto-map dynamic dynmap 10 transform-set RIGHT

  map mymap 10-isakmp ipsec crypto dynamic dynmap

  client configuration address map mymap crypto initiate

  client configuration address map mymap crypto answer

  mymap map crypto inside interface

  ISAKMP allows inside

  ISAKMP key * address 0.0.0.0 netmask 0.0.0.0

  ISAKMP identity address

  part of pre authentication ISAKMP policy 10

  ISAKMP policy 10 3des encryption

  ISAKMP policy 10 sha hash

  10 2 ISAKMP policy group

  ISAKMP life duration strategy 10 86400

  vpngroup address private pool PRIVADAGROUP

  PRIVADAGROUP vpngroup password *.

  vpngroup split tunnel 100 PRIVADAGROUP

  I have a few questions about this configuration maybe some kind soul able to respond.

  1. the VPN clients receive an address (10.3.3.1) for example through the IKE negotiation. When I ping my server from the client with the active VPN tunnel I assume the real package that passes through the wire has 10.3.3.1 a source address and a destination of 200.200.212.193 (endpoint the VPN and inside interface). Within IPSEC, the package is my real ip with a source 200.200.212.194 address (address of the real client) and a destination address of 200.200.202.201 (address of the backup server that I am trying to ping). If all this makes sense and is correct could you confirm the following point.

  2 when the PIX deencrypts the package and removes the IPSEC header I find myself with my IP packet of origin with a source 200.200.212.194 address (address of the real client) and a destination address of 200.200.202.201 (address of the backup server that I am trying to ping). I don't know if I need then the following configuration to allow the package to be transferred to the backup without NAT server:

  access-list allowed sheep host ip 200.200.212.194 255.255.255.0 200.200.202.0 255.255.255.0

  NAT (inside) 0 access-list sheep

  I was previously using the following configuration and it seemed to work but the more I think the less sense it seems to do as I´d wait for the SENATE to run on the dencypted package. I must be missing something or confused, or both.

  IP 10.3.3.0 allow Access-list sheep 255.255.255.0 200.200.202.0 255.255.255.0

  NAT (inside) 0 access-list sheep

  3. as a last and probably least I m pretty sure I don't have to line "isakmp key * address 0.0.0.0 netmask 0.0.0.0" when connecting with a VPN client software only. Somone can confirm that for me.

  I'm actually trying to get this to work remotely with someone else doing the actual work and we don't speak the same language.

  Any help to store my confused brain would be appreciated.

  1. No, it's the other way around. The real package that passes through the wire has the address IP of the PC (200.200.212.194) as a source. Within the IPSec packet is allocated 10.3.3.1 as source IP address. When the PIX decrypts the packet, the outer header is removed, and the package has a source of 10.3.3.1 as it is sent to your server on the outside. The external server will respond to 10.3.3.1 so it must be routed to the PIX for her to work.

  Think of this as the normal instance with the PC to the outside through the Internet. A package from of and sent to 10.3.3.1 would never do to the original PC. The encrypted IPSec packet always contains the VPN endpoints real IP source and destination addresses. The decrypted original deck contains allocated as source IP and the actual destination as destination (usually also a private address) computer.

  2. This should make more sense now that you know the answer to 1.

  3. you don't need that if you have a "vpngroup password xxxx" command. This command «isakmp key...» "If there is no specific vpngroup key, or someone connects with a different groupname.

• PPTP VPN pix 501 question

  I'm relatively new to the security stuff.  I'm a guy of the voice.  I created a Pix 501 for IPSEC VPN and works very well.  Then I tried it setting up PPTP VPN.  I use Windows XP to connect.  It connects fine, but I can't ping to the inside interface on the PIX.  I can do this by using IPSEC.  Any ideas?   Here is my config:

  :

  6.3 (3) version PIX

  interface ethernet0 car

  interface ethernet1 100full

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  activate the password * encrypted

  passwd * encrypted

  host name *.

  domain name *.

  fixup protocol dns-length maximum 512

  fixup protocol ftp 21

  fixup protocol h323 h225 1720

  fixup protocol h323 ras 1718-1719

  fixup protocol http 80

  fixup protocol pptp 1723

  fixup protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol sip 5060

  fixup protocol sip udp 5060

  fixup protocol 2000 skinny

  fixup protocol smtp 25

  fixup protocol sqlnet 1521

  fixup protocol tftp 69

  names of

  access-list 101 permit icmp any any echo response

  access-list 80 allow ip 10.0.0.0 255.255.255.0 192.168.5.0 255.255.255.0

  access-list ip 10.0.0.0 sheep allow 255.255.255.0 192.168.5.0 255.255.255.0

  access-list ip 10.0.0.0 sheep allow 255.255.255.0 192.168.6.0 255.255.255.0

  pager lines 24

  opening of session

  emergency logging console

  Outside 1500 MTU

  Within 1500 MTU

  IP address outside of *. *. *. * 255.255.255.0

  IP address inside 10.0.0.1 255.255.255.0

  alarm action IP verification of information

  alarm action attack IP audit

  IP local pool pool1 192.168.5.100 - 192.168.5.200

  IP local pool pool2 192.168.6.100 - 192.168.6.200

  history of PDM activate

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0 access-list sheep

  NAT (inside) 1 10.0.0.0 255.0.0.0 0 0

  Access-group 101 in external interface

  Route outside 0.0.0.0 0.0.0.0 *. *. *. * 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  RADIUS Protocol RADIUS AAA server

  AAA-server local LOCAL Protocol

  the ssh LOCAL console AAA authentication

  No snmp server location

  No snmp Server contact

  SNMP-Server Community public

  No trap to activate snmp Server

  enable floodguard

  Permitted connection ipsec sysopt

  Sysopt connection permit-pptp

  Sysopt connection permit-l2tp

  Crypto ipsec transform-set high - esp-3des esp-sha-hmac

  Crypto ipsec transform-set esp - esp-md5-hmac RIGHT

  Crypto dynamic-map cisco 4 strong transform-set - a

  Crypto-map dynamic dynmap 10 transform-set RIGHT

  Cisco dynamic of the partners-card 20 crypto ipsec isakmp

  partner-map interface card crypto outside

  card crypto 10 PPTP ipsec-isakmp dynamic dynmap

  ISAKMP allows outside

  ISAKMP key * address 0.0.0.0 netmask 0.0.0.0

  ISAKMP nat-traversal 20

  part of pre authentication ISAKMP policy 8

  ISAKMP strategy 8 3des encryption

  ISAKMP strategy 8 md5 hash

  8 2 ISAKMP policy group

  ISAKMP life duration strategy 8 the 86400

  vpngroup address pool1 pool test

  vpngroup default-field lab118 test

  vpngroup split tunnel 80 test

  vpngroup test 1800 idle time

  Telnet timeout 5

  SSH 10.0.0.0 255.0.0.0 inside

  SSH 192.168.5.0 255.255.255.0 inside

  SSH 192.168.6.0 255.255.255.0 inside

  SSH timeout 5

  management-access inside

  Console timeout 0

  VPDN PPTP-VPDN-group accept dialin pptp

  VPDN group PPTP-VPDN-GROUP ppp authentication chap

  VPDN group PPTP-VPDN-GROUP ppp mschap authentication

  VPDN group PPTP-VPDN-GROUP ppp encryption mppe auto

  VPDN group VPDN GROUP-PPTP client configuration address local pool2

  VPDN group VPDN GROUP-PPTP client configuration dns 8.8.8.8

  VPDN group VPDN GROUP-PPTP pptp echo 60

  VPDN group VPDN GROUP-PPTP client for local authentication

  VPDN username bmeade password *.

  VPDN allow outside

  You will have to connect to an internal system inside and out run the PIX using pptp.

  For ssh access the PIX, you will also need additional configuration, see the section on code PIX pre 7.x, section access ssh to the security apparatus .

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a008069bf1b.shtml#C4

  Concerning

• VSS configuration on cisco 4507 R + E

  Hi all

  This is the first time I'll configure VSS, I learned some stuff online, but most of them was 6500 Series also I need expert advice that's why I post here.

  Right now I have 2 brand new Cisco 4507 R + E and planning set up VSS on it. The hardware details are below.

  NAME: 'switch system', DESCR: "" Cisco Systems, Inc. WS-switch 7 slot C4507R + E ".
  PID: WS-C4507R + E, VID: V09, SN: FXS1937Q0ZE

  NAME: "line card (slot 1) ', DESCR:"1000BaseX (SFP) with 24 Ports SFP Jumbo Frame Support.
  -Other - PID: WS - X 4724-SFP-E, VID: V01, SN: CAT1946L468

  NAME: 'supervisor (slot 3)', DESCR: ' Sup 8 - E 10GE (SFP +), 1000BaseX (SFP) with 8 Ports SFP + ".
  PID: WS - X 45-SUP8-E, VID: V05, SN: CAT1947L0PP

  NAME: 'TenGigabitEthernet3/1', DESCR: 'SFP-10Gbase-SR.
  PID: SFP - 10 G - SR, VID: V03, SN: FNS19450B6N

  • Please let me know the correct way to set up this series as vss
  • do I need an ideal config on the two switch (during a power failure, if the other switch does not work then I think than its necessity even config as the first) sorry maybe I'm confused by VSS and HSRP work...: p.
  • How to connect to any other device L3 connected to vs. With L3 port channel?

  To make these clear confusion for me, thank you.

  Luck shines on you.

  Sup8E means that you can activate Easily VSS.

• Stand-alone configuration of Cisco Aironet 700i

  Hello

  I'm well aware new products Cisco. So please forgive my basic questions.

  I have Cisco Aironet 700 series AP(AIR-SAP702I-Q-K9). I don't have a controller. I need to set this up as standalone access point.

  I tried all the basic steps and tried to activate the two radios, but no luck. Anyone can guide me please on how to configure the AP.

  I use web access to configure the AP.

  Help, please

  Thank you

  Sagar

  Hi Sam,

  Please check these messages to set up autonomous AP.

  https://rscciew.WordPress.com/2014/05/24/single-SSID-configuration-on-au...

  https://rscciew.WordPress.com/2014/05/24/multiple-SSID-configurations-on...

  Concerning

  Remember messages useful rates