Simple question about the signing of the app

Similar Questions

• I have a simple question about the meta-data.

  Hello. It is a simple question about the meta-data. How can I get the video bitrate of a flv or mp4 (video playing via NetStream file) file

  right now I have this:

  Code
  var netClient:Object = new Object(); netClient.onMetaData = function(meta:Object) { for (var in meta props) {} trace (props + ":" + meta [props]); } MovieClip (root) .durations = meta.duration; trace (MovieClip (root) .durations); }; NS.client = netClient;

  And my output is:

  videocodecid: avc1
  audiocodecid: m4as
  aacaot: 2
  Width: 960
  AudioChannels: 2
  videoframerate: 23.976
  TrackInfo: [object Object], [object Object]
  moovposition: 32
  avcprofile: 77
  audiosamplerate: 48000
  avclevel: 31
  seekpoints: [object Object], [object Object], [object Object], [object Object]
  height: 540
  Duration: 221.312

  As you can see, there is nothing of video bitrate.

  I know that the video bitrate of my videos, but then I have to manually type each number of bitrate into my flash project, and it would be such a fuss when I have a lot of videos. Would be nice if flash can detect the video bitrate.

  It's for my online portfolio.

  Why you divide by 8?  If you want to convert bytes into bits, multiply by 8.

• Question about the app for iPad retina

  Hello.

  I searched on this subject, but everything I found was opposed to what I was looking for.

  I developed an application (AIR 3.7.0.1530, Flash CS6), full resolution: 2048 x 1536.

  While I'm checking this app on iPad 2, it works very well and shows everything because I set stage.scaleMode property of ScaleMode.SHOW_ALL. Even if it's a bit ragged, but I am satisfied with the quality.

  What I can't find is, if I download it from the App Store, it will be available for the iPad 2 as well or it can be installed on the iPad retina display?

  Thank you.

  Hey Yusuf,.

  As far as I know any application created in the AIR will work on any device you set in the

  UIDeviceFamily

  Of the application descriptor, if you '2' in there (if you already iPad which means this is already install), this means so that it runs on all iPads little matter how your application actually looks at the screen.

  ------

  While it is fine, running a 2048 x 1536 on an iPad 1, 2 application or Mini will drastically effect the performance of the application, it can even crash on iPad memory 1 if there are too many things on the screen. Is generally good practice to create applications that can evolve around the appliance connection dynamically to the resolution correctly well.

  Anyway to answer your question directly:

  Your application will be available for all iPads. (unless you lock the version iOS to 6 +, which means the iPad 1 is not included)

  Hope that helps,

  O.

• Question about the app from the App Store

  A screenshot of something related to the app from the App Store.  It has been around for years, but I can't find any reference to it.  What is c?

  It's a mystery.

  Mac mini end of 2012, i7 2.6 G, 16GB mem, El Capitan 10.11.6

  It appears and disappears at random, seldom (monthly?), don't know what triggers it.  I don't find it in the list of processes?

  It is irritating and seems harmless, but who am I to judge a prejudice.

  Johno-

  Try to validate fonts and, if necessary, to restore the Unicode Standard.

  Police book - validate fonts

• simple question about the performance of views

  I have a discussion of work (battle) with several developers about the misuse of the views. Basically, they want to do a load of remote data to the server using views. Its code is from a full view and join between views by using all kinds of methods, such as LEFT OUTER, DECODE, etc.. I don't think that's right, I know that they must use the procedures to extract information and transform into tables and loading (ETL). But sometimes I'm new on the job and I have all the arguments so that they believe me, in my opinion as the join of all these points of view produces less than optimal. I think it is correct to consult to see if I'm right or wrong.
  
  Thank you.

  You are right. A view is a query online. Why anyone would add this to an ETL process?

  Avoid as much as possible the views and use SQL statements to query the tables directly.

  (I wonder if they like paying anything?)

  Views are likely to require analysis that cause performance problem.

  Views can result in countless columns returned when all you really need are some of these columns.

  The best way to win this (fight) is to offer to write the SQL code for them.

  A little explains plans before and after will not hurt either.

  Best regards

  mseberg

  Published by: mseberg on August 20, 2011 19:58

  Database Performance Tuning Guide B28274-02

  16 SQL Tuning Overview

  Effective development of SQL statements

• simple question about the condition

  I have a simple code:

  function fl_TouchEndHandler_v(event:TouchEvent):void

  {

  event.target.stopTouchDrag (event.touchPointID);

  var targets_v;

  var obj_v = event.target;

  event.target.stopTouchDrag (event.touchPointID);

  targets_v = (obj_v.DropTarget.parent)

  obj_v.x = targets_v.x

  obj_v.y = targets_v.y

  trace (targets_v.Name);

  my_sound_v.play ();

  I need to write a condition (if or while) that will do something if my sound does not play (for some reason any).
  

  Find the Sound class in the Flash help documents.  In the section covering the load() method, there is an example that uses a try/catch approach, but also an event listener...

  try {}

  SND. Load (req);

  SND. Play();

  }

  catch (err: error) {}

  trace (Err.message);

  }

  snd.addEventListener (IOErrorEvent.IO_ERROR, errorHandler);

• Simple question about the race of the Illustrator borders - help please!

  Hello

  I'm new to Illustrator, and I can't understand something.

  I have a simple rectangle with a fill color, say red and a color of outline of us Let's say blue. Then, I use the drop down menu on the horizontal tool bar options change the race of a simple contour to something that looks more like a decorative edge. In CS4, I use the last option on the drop down menu, which has to stroke brain/border corners around the inside of the curve. When I chose this option, the filling remains as a rectangle with sharp corners that 'out' where the accident vascular cerebral/border curve inwards.

  I would like to know how to keep the race/border while getting rid of corners of the rectangle that die. I tried the erasure of the rectangle, but negatively affecting the border/stroke shape.

  Thank you very much for your help.

  David

  There are a few ways (or maybe more) to do. Both involve separating the object into two parts, one with a fill and no respect and the other of a sudden and no fill. Make sure that the trace object is on top and apply the brush line, then lock it. Add and remove anchor points at the four corners to get the below form (magenta rectangle) that will be hidden by the brush line. You can also do it using object > decaying appearance to generate the two forms of the original.

  

• Simple question about the field in 4.7.0 class

  Hi, people.

  No one knows what method of field controls class that the virtual keyboard is displayed when the field is concentrated.

  I implemented a custom field and when it happens the keyboard displayed discussion. And I want to avoid this.

  What is the method that I need to replace to avoid the display of the virtual keyboard?

  Thank you.

  You can use the internal VirtualKeyboard onFocus of your custom field and onUnFocus methods to control the display of the virtual keyboard.

• A seemingly simple question about the free transform tool.

  I have always used the free transform tool where the thing that turns in the background, and the transformation automatically makes a new layer. How can I do if the transformation will not cause a new layer, and it won't be the thing in the background which has been transformed to the original?

  I noticed that with other people, it is not the thing that has been transformed in the background, so they have to deal with him.

  Edit - Transform does not a new layer automatically AFAIK.

  Any chance you've been making is something like this?

  1. duplicate the layer with the tool move, possibly by holding down the Alt (or Option) key while dragging with the mouse.

  2 to see the transformation of the controls is enabled for the tool move, which means that the show handles when the move tool is selected and immediately, it would be possible to transform what has been moved / duplicated.

  

  -Christmas

• Simple question about the file .AS in flex3 code integration

  I'm sure it's very easy for most people, but I can't understand it off... nada, zilch...
  
  I have this file ( file of optimized Perlin noise), and I'm trying to register / make available in my code flex3. I can't get the code right names/import space, and I'm not sure - because of the namespace - if I'm supposed to put this file in a collection of subfolders (something like: nl/ronvalstar/math...). The end result is for me to be able to replace the BitmapData.perlinNoise method with a version optimized for the generation of clouds in real time.
  
  I would be grateful if someone could give the code for this file integrated.
  
  Thanks :)

  You must place the file in the folder (> indicates subfolder)

  SRC > nl > ronvalstar > math

  You are supposed not only to put the file here, you put it here. In fact, it must put a packet having all its classes in the corresponding folder.

  Then, use

  Nl.ronvalstar.math import. *;

  at the beginning of the section of your mx:Script. Or - just import the single class - use this:

  Import nl.ronvalstar.math.OptimizedPerlin;

• Person to contact with questions about the presentation of the app world

  If I have a question about the app that I submitted, anyone knows how do I contact someone about this? I can't find anything on the site and respond to notification emails gets me nowhere.

  Hey miss breeder,.

  that will be tough. If you browse the App World his hell out there because of the new development forums and people have a lot of problems with it. I've read people were emailing RIM all week and no responses were received. But if you post a question here MShom (one of the moderators) usually responds in a timely. The support email is [email protected] I believe. Good luck!

• Is it a good place to ask questions about the slow s Tablet touchscreen response?

  Is it a good place to ask questions about the slow s Tablet touchscreen response?

  You experience slow response on normal s tablet, the first gen one or the Xperia s tablet, a new.

  If you experience a slow response, it may be because you use too many apps at the time and slowing down of your tablet. How long it lasts?

• Recently bought a laptop computer; A few questions about the offer Upgrade to Windows 8

  I have a few questions about the Upgrade of Windows 8 offer for new computers.  I recently bought a Toshiba Satellite S855-S5268 of amazon.com, which came with Windows 7 Home Premium.  Toshiba already has a beta version of drivers and utilities for Windows 8 for the S855 on their Web site.

  (1) I bought my laptop in July of this year, and I've not yet registered for 8 Windows Upgrade offer with Microsoft.  Am I still eligible to receive the upgrade, if I sign up soon?
  (2) if I buy the upgrade through this offer, I'll be able to download an ISO file so I can burn the installation media, or do I need to upgrade to Windows 7?
  (3) if I will be able to burn the installation media, I'll be able to erase my hard drive and do a clean install of Windows 8 (which I'd rather do, I have a lot of backups of my data).  I am aware that I would probably need to provide my product key Windows 7 Home Premium 64-bit OEM during the new installation, because it is an upgrade and not a full version; This isn't a big deal, because my Windows 7 Home Premium 64-bit OEM product key is stuck at the bottom of my laptop.
  (4) my current copy of Windows 7 is activated by seeing my BIOS (I have a traditional BIOS, not a UEFI).  If I had to switch to Windows 8 and decide then I'd rather back in Windows 7, for example, a few months later, I'll be able to do that (I burned recovery of Windows 7 with the Toshiba utility disks, which I did), and Windows 7 will continue to activate by seeing my BIOS, even after the installation (and later remove) Windows 8?
  Thank you very much!

  I have a few questions about the Upgrade of Windows 8 offer for new computers.  I recently bought a Toshiba Satellite S855-S5268 of amazon.com, which came with Windows 7 Home Premium.  Toshiba already has a beta version of drivers and utilities for Windows 8 for the S855 on their Web site.

  (1) I bought my laptop in July of this year, and I've not yet registered for 8 Windows Upgrade offer with Microsoft.  Am I still eligible to receive the upgrade, if I sign up soon?

   

  Yes, the registration period is between June 2, 2012 to January 31, 2013.

  (2) if I buy the upgrade through this offer, I'll be able to download an ISO file so I can burn the installation media, or do I need to upgrade to Windows 7?

   

  Yes, the Upgrade Wizard of Windows 8 will allow you to create a bootable DVD or you can grab the ESD file and save it.

  (3) if I will be able to burn the installation media, I'll be able to erase my hard drive and do a clean install of Windows 8 (which I'd rather do, I have a lot of backups of my data).  I am aware that I would probably need to provide my product key Windows 7 Home Premium 64-bit OEM during the new installation, because it is an upgrade and not a full version; This isn't a big deal, because my Windows 7 Home Premium 64-bit OEM product key is stuck at the bottom of my laptop.

   

  Yes and there are better ways to reinstall Windows 8 without using the installation disc, you can use the reset and refresh.

   

   

  These steps will take you through refreshing your PC:

  · Press the Windows key + C on your keyboard to show the charms (if you use a touch screen: touch the right edge of your screen and drag your finger to the left)

  · Click settings

  · Click change PC settings

  · Click general in the left column

  · Under refresh your PC without affecting your files, click Start

  Then follow the instructions that will be provided on-screen to cool your PC.

  (4) my current copy of Windows 7 is activated by seeing my BIOS (I have a traditional BIOS, not a UEFI).  If I had to switch to Windows 8 and decide then I'd rather back in Windows 7, for example, a few months later, I'll be able to do that (I burned recovery of Windows 7 with the Toshiba utility disks, which I did), and Windows 7 will continue to activate by seeing my BIOS, even after the installation (and later remove) Windows 8?
   
  As long as you have a recovery disk which you should create or use the construction in the recovery partition, Yes, it will self activate.
  Thank you very much!

• Questions about the terms and conditions

  Dear team of Adobe Stock,

  I am considering a subscription for an e-commerce site that I am developing. I have a few questions about the terms and conditions:

  3.5 social media use. You can view or download an unmodified version of the book on the Social media Site if (A) you include a notice of copyright in the work itself (© author name - stock.adobe.com) and (B) the terms of use governing the Social media Site do not include any provision that would grant exclusive rights or the ownership of those works or alterations to anyone. "Social Media Site" means a website or application that puts the main emphasis on facilitating social interaction between its users and allowing users to share content in such social interaction

  What I have to insert in each post on social media on behalf of the author? Generally, this information is displayed only for free images. What I have to insert this information even if I signed up for a plan?

  Thank you

  Hello

  Please see the link below for help:

  http://wwwimages.Adobe.com/content/dam/ACOM/en/legal/servicetou/Adobe-stock-additional-ter ms_20160119.pdf

• Questions about the implementation of clusters of storage and DTS on active cluster

  I have a few questions about the implementation of clusters of data store and SRS storage in VSphere 5.1.

  We have a data center with about 15 HP blades and a few servers non-lame.  The hosts are all either VSphere 5.0 or 5.1.  Our back-end storage is an EMC VNX 5700 with about 20 stores of data.  All the VMWare is managed by VCenter 5.1 running on a dedicated physical machine.

  Currently, each data store is used individually; No piles of data store are put in place.  When a new virtual machine is created, the administrator usually chooses the data with the most space store.  Periodically, we will go back and manually storage vMotion machines to balance the load.

  Recently, we have expanded the VNX storage, so we now have LUNS in different pools, with different levels of performance.

  What I would do is set up for the data store clusters, so that us when a virtual machine is created, the administrator must not know what data store is in which pool.  Also take advantage of the DRS storage so that the burden of storage will be "refine" himself a little.

  I know the setting up of a cluster of storage in a 'clean' environment is quite simple, but my concern is creation/conversion data warehouses existing in active production in the cluster, while they are used.

  If I access the screen "data warehouses and store data from clusters ', right-click on the data center and create a cluster, and then move the various data stores in the new cluster, will there be an interruption in the production running systems?

  I also wonder about activation of storage i/o control.  It is not currently enabled on data warehouses.  I know it's useful for the StorageDRS, but will be allowing any negative impact on the system?  If I turn on the warehouses of data, is there anything else I should do or set in addition to all that allows him?

  Finally, we are in the process of Site Recovery Manager configuration.  SRS has an impact on the configuration of the data clusters and DTS store?

  Thanks in advance for your comments.

  Mike O.

  Gregg Robertson wrote:

  Hello

  Clusters of data and using DTS store doesn't impact RS even if you create a cluster of data store for storage of replicated data and another for everyone else, this way you machines virtual you want to replicate are not moved on warehouses of data that are not replicated , but will still have the ability to move if there is a conflict.

  Gregg

  With all due respect but SRM and DTS don't go together. SRM does not at all support the use of DTS. So if you are configuring SRM forget DTS for now.

  Reason for this is that SRM knows no DTS and VMs can be in flight when a failover should occur, and bad things can happen. Also, the protection breaks when a virtual computer is moved between data warehouses in a cluster data store.

  In short: don't go there.