simple question and Multi point question

Similar Questions

• MacBook Pro (retina, 15 inches, beginning 2013) El Capitan 10.11.3, Simple question here: I can't open FinalCut Express (4, I believe). The wheel turns for hours. How can I install/uninstall and will I lose all my old films (for the most part stored on ex

  MacBook Pro (retina, 15 inches, beginning 2013) El Capitan 10.11.3, Simple question here: I can't open FinalCut Express (4, I believe). The wheel turns for hours. How can I install/uninstall and will I lose all my old films (for the most part stored on external hard drives). Thanks for your suggestions.

  You will not lose anything, but the app if you uninstall. If you decide to uninstall use this app to make sure that all the other files which depends on FCE are also deleted however I can't give you any assurance as to whether you will be able to reinstall so that it works correctly. It is a software that has not been supported for almost 5 years and there are conflicting reports as to its compatibility with OS X 10.11. Can't I test it myself.

  Maybe someone else will chime in with their own experiences.

  Russ

• I have the latest version of Lightroom CC2015.  My problem / question is with the Radial filter.  The circle, PIN and anchor point are not displayed.  Ask for help via Chat told me to uninstall and reinstall.  This does not help / correct the problem

  Can someone hepl with Radial filter / circle, PIN and anchor point are not displayed.  Thank you

  Try asking your question in the Lightroom Photoshop Lightroom forum

• Question buttons, redirect optional URL and "Set points".

  Hello Apex experts... and others!
  I tried to use the "redirect to URL Optional" and "Set POINTS" a button to initiate new elements of page target.
  It does not, the target_page elements are not being updated!
  Deletion of the redirect URL and create a branch when 'NEXT' and assigning the same target page elements works fine
  What is the difference?
  When should I use the "Optional URL forwarding" option?
  / Curious Guan

  When the creation of a button if you select "Create Button in a position of region" button becomes an of the Page "button, if you select 'Create a button displayed among the elements of this region', it becomes just a button or a region...

  V/R

  Robert

• simple question to function test of value chain

  Hey guys,.

  I m just started using teststand.

  My simple question is related to the function "test string value '. What is the difference between the "type of comparison' CASE SENSITIVE and IGNORE CASE? From my point of view are not really meaningful names.

  To avoid simple and stupid questions like that, I tried to use the internal helper function. I'm wrong when I say that the help features are not as good as in labView? I couldn t find any answer to my question... hmmm... How other people handle this situation? (outside of just trying?)

  Thanks for your help

  Hello

  Case SENSITIVE: it will fail if you compare "HELLO" with 'Hello' or 'A' with 'a '.

  IGNORE CASE: this will pass if you compare "HELLO" with 'Hello' or 'A' with 'a '.

  Hope that explains

  Jürgen

• Simple question on a Cisco/Tandberg C20 codec

  Hi guys,.

  I would like to ask your advice on a question, one of our customers recently raised; Here's the short story:

  After that his ISP set at level a GK Radvision, customer knew no video, on its C20s, multi point conferences (video was successfully sent well).

  After an initial diagnosis, the customer said that the question can be put in the C20 non acceptance/negotiation QCIF video Protocol (used in Radvision and other old stuff eventually to join the Conference).

  As a solution, ISP has suggested to activate via SSH (command API) specific C20 (QCIF) Protocol (which is apparently not enabled by default... According to the ISP support)

  Now, I know, C20 already supports QCIF and has to be without having to activate it via the specific shell commands!

  ... Besides there no reference in the documentation of the API C20 on a specific command.

  What I suspect is that from time to time, an old codec ISDN connects to the Conference (perhaps as a first candidate) and somehow requires the MCU to negotiate some weird codec leading to no video (... Indeed, we saw through a troubleshooting session, conneting that theree different IP partecipants and we have not had any problems at all!).

  Could you please let me know if I am mistaken and C20 accepts indeed default QCIF? ... If Yes, please could you me the command to allow it?

  Thank you very much!

  -Andrea

  You're right C20 QCIF support in the default configuration, and no need to add a special command for him to allow.

  Just for example, below is capset(2) terminal of C20 redefining this as video can be receive and including QCIF with multiple video Protocol.

  ================================================================

  BEGINNING of incoming MESSAGE H245LO-1

  capabilityTableEntryNumber 12,

  capacity receiveVideoCapability: h263VideoCapability:

  {

  qcifMPI 1,.<== support="" for="" decoding="" qcif="" for="">

  cifMPI 1,.

  cif4MPI 1,.

  maxBitRate 20000,

  unrestrictedVector FALSE,

  arithmeticCoding FALSE,

  advancedPrediction FALSE,

  pbFrames FALSE,

  temporalSpatialTradeOffCapability FALSE,

  errorCompensation FALSE,

  h263Options

  {

  capabilityTableEntryNumber 14,

  capacity receiveVideoCapability: h261VideoCapability:

  {

  qcifMPI 1,.<== support="" for="" decoding="" qcif="" for="">

  cifMPI 1,.

  temporalSpatialTradeOffCapability FALSE,

  maxBitRate 19200,

  stillImageTransmission TRUE

  capabilityTableEntryNumber 18,

  capacity receiveVideoCapability: extendedVideoCapability:

  h263VideoCapability:

  {

  qcifMPI 1,.<== support="" for="" decoding="" qcif="" for="">

  cifMPI 1,.

  cif4MPI 1,.

  maxBitRate 20000,

  unrestrictedVector FALSE,

  arithmeticCoding FALSE,

  advancedPrediction FALSE,

  pbFrames FALSE,

  temporalSpatialTradeOffCapability FALSE,

  errorCompensation FALSE

  ================================================================

  Although using QCIF with C20 is little lose capacity C20 power video treatment, but interesting to understand why the software upgrade of Radvision GK introduce one-way video problem.

  Application of C20 log will definitely help to identify or at least limit the first cause of this.

• Simple question... How do to add pictures on the body of my MAILS found 1000 results for how can I add photos to my Thunderbird emails

  How can simple question - I add photos to my mail body. But instead of the answer - found 1000 results for how can I add photos to my Thunderbird emails. There are answers that don't apply at all to the question anyway. Why must it be so difficult to get a simple answer to a simple question?

  Thunderbird is a bit like Microsoft, all the reasons as I dumped MS Live Mail.

  First, a lot of help for Thunderbird refers to the menus that may not be visible. It would be useful to you and us if you have your menus and toolbars visible.

  http://chrisramsden.vfast.co.UK/13_Menus_in_Thunderbird.html

  Then, open a window of writing. Activate the menu and operate.

  Now that you see an option "Insert"?

  If this isn't the case, you can assign composing in plain text, which does not support embedded images.

  Tools | Account settings| {Select account} | Composition & addressing and ensure "Compose messages in HTML format" are checked. If it is not already checked, go back to writing a message. No better now?

  Once you have the mode of composition HTML goes, you can use Insert | Image or various permutations of copy - paste and drag - move to the body of your message.

  A manual of sorts: http://en.flossmanuals.net/thunderbird/composing-messages/

• The simple question is "where can I find the installer for the HP Quick start?

  The simple question is "where can I find the installer for the HP Quick start?

  BESR regards

  Hello:

  And here's one for W8...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_140915_1#tab1

• I don't have to fix anything; I have just a simple question.

  I have just a simple question: what is maximum allowed data on Microsoft Outlook Express emails? Please, let me Know.Thank you.

  You should check with your ISP for this information. Your ISP mail servers dictate the maximum size of your mail more attachments. Outlook Express is simply a client program to encode, and send/receive binary data for you.
  Microsoft® Security MVP, 2004-2010

• Simple question R61i Ultrabay...

  It's really a simple question, but I can't find the answer in any of the documents online.  I have a laptop Lenovo R61i 15.1 "widescreen, and I just need to know if it comes with a slot for Ultrabay Slim drive, a drive advance Ultrabay location or an other versions Ultrabay.  I would like to buy a long battery life to adapt to the Ultrabay box, but I see that the different Ultrabay models are not compatible, I want to know what one I need to buy for my computer.  Any help appreciated.

  widescreen 15.4 inch R61i like any other laptop R6x use housing Ultrabay Enhanced readers with EIDE interface and not the new laptop Rxxx SATA interface.

• Create a group of users to ACS 3.3 - simple question

  Hello

  I have a simple question:

  How can I create a group of additional users at the ACS 3.3?

  I don't see the option to delete or create groups of users. Perhaps is it not possible?

  Thanks in advance

  All groups that you have already exist in the list of groups (0 to 499). To "create" a new group, just rename one of the unused existing groups and use.

  If you don't see the groups in your list, you must verify that you have access to see all these groups.

  Verifier check in the control of the Administration, select your admin user ID. In the second table below marked 'administrator', you will see the "available groups" and the editable section 'groups '. move the groups that you want to use available for editable.

  Present and then OU should be able to see these groups on your drop-down list in the section groups.

• BlackBerry Smartphones has simple question on volume of phone ringing.

  I am grateful for this forum because even simple questions like the following are difficult to obtain responded by Blackberry.  Seizing the issue in the 'Help' section on my handheld gives always nothing.  It seems that a large company like RIM would understand more in their user manuals.  Anyway, enough ranting... Here's the question:

  Quite simply, how can I increase the volume of the ringer on the phone?  By pushing the volume button for a call that increase the volume of calls.  Pushing not courts of appeal does nothing.  I'm sure that there is a way to do it, but I'm coming emptyhanded.

  Thank once again the community here as a whole for the excellent work which is made to help other Blackberry users.

  Profiles > advanced > highlight the profile you want to edit > press the menu key and go to 'Edit' > scroll down the list and find what you want to change the volume of the ring tone for example, standard messages

• How can I add two very simple Questions to a slide?

  Hello

  I would like to be able to add two very simple questions to a slide, but don't know if (or how) this can be achieved. I've explained this more in detail below:

  ====================================================================================

  Scenario of

  The slide must contain two questions:

  Question 1: with two check boxes for the options Yes and No

  Question 2: with five check boxes for options 1 2 3 4 and 5

  A button (for example named Submit) to verify the responses from users by triggering a tip Action that verifies the radio buttons that have been selected.

  ====================================================================================

  The checkbox Widget looks like it could work for this scenario, because it allows each value to be assigned to a variable. However, when you try to put in place the tip Action I couldn't see all the variables I named in the checkbox Widget.

  
  

  If anyone has done this kind of thing before and can offer advice on the best way to create custom questions, I'd appreciate any help.

  
  

  For reference, I use 8 Captivate.
  

  
  

  Thank you

  
  

  Ross
  

  I indeed used interactions of checkboxes or radio buttons many times for this kind of slides. That's why I'm confused and I first want to know if you want an answer to the second issue as well? For the first question, it is clear that you need an interaction of option buttons, I don't know if you want to allow more than one choice for the second question. Only when you need to allow more than a choice will you have the interaction of check boxes, in the other scenario, option buttons will do the trick. It makes a big difference, because the radio button widget has only one associated variable that will store the selected element. For the widget checkboxes, you need a variable for each choice.

  Maybe my blog could help clarify, you can also download a descriptive table with all interactions of CP8 training

  Advice - Training interaction - Captivate blog

  BTW, I moved this thread to the Quizzing subspace.

• Starting with a Cintiq in Adobe Flash - a series of simple questions desperately not found!

  I am completely new to the Flash IDE, but I used my 13HD Cintiq with Photoshop in the past. Despite the Tablet works well and correctly drawing, so far Flash feels very weird and almost unusable. I spent hours searching online for answers to these simple questions, and I found nothing. Help please respond if you can!

  1. Eraser brush size: I have the wacom pen, brush and Eraser gum (pretty standard) value. Can I adjust the size of the brush of the pen in the toolbar, but the gum is stuck to the smaller size! I put the tool eraser for the max brush size, and when the stylus is set on the Eraser tool directly, it is larger. How to set the other side of the pen wacom for a larger size of the brush? And aren't there keyboard shortcuts to increase or decrease the size of brush in Flash? (similar [and] in Photoshop)

  2 zoom brush: changes the brush size when you zoom in. People online say the size of the brush is constant, but it is simply not true. When you zoom to 200%, the brush must be twice as big is in 100% zoom. Is it possible to Flash this (normal) behavior?

  3 timeline packaging: can visit the 'step before an image' and "not back an image" (comma and period) key wrap the entire timeline, so walking to the front on the last image will frame 1 and walking backward on frame 1 goes to the last image? It's important for me to animate well loops, and I can't find anything online or in the preferences. Shift + comma and shift + period is acceptable workaround solutions, but they are not ideal, because I have the comma and period mapped to buttons on the Cintiq. I need them to wrap!

  4 digital brush thickness: is there a way to specify a thickness of brush with a number? I have to use the pen to get the STROKE thickness properties? At the very least, can I use a keyboard shortcut to specify the size, rather than click on toolbars?

  Honestly, I'm at the end of my rope here. I'm almost ready to completely abandon the Flash this in Illustrator, and then animate in Flash, so I've drawn everything correctly. Why everything is so different, and why I can't find one of these simple questions online?

  Him long and short of it is no you can't do most of the things you want to do as much as the brush is concerned. Flash has ALWAYS increased the size of the brush as you approach and it decreases when zooming. Why? No idea, but it has always been so.  You CAN increase the size of the brush in numbers but using the properties box. The Eraser is weird in Flash. so I use the Lasso tool and select what I don't want and delete it. Given that you're used to Illustrator you might not realize that selection of a brush stroke areas will NOT select the entire race as in Illustrator. You can only select parts. You can also sort of allow for what you call enveloping chronology by installing a command and by mapping to a custom key command. Make sure that there is a keyframe at the end of the cycle.

  Dropbox - Flash_Select_Next_and_Previous_Keyframes.zip

  Also, this could sort through what you want too:

  http://www.toonmonkey.com/frameJumper.fla

  Finally, Flash is no different that there has never been and it must be considered that, while the Illustrator has been developed by Adobe, Flash was developed by Macromedia and was then bought by Adobe years later then you "cannot really be expected to operate the same. Personally, I HATE the interface of Illustrator and hate the way it works if I hate it if Flash worked as an Illustrator!

  In any case, I hope this helps.

• Simple question - alternative text of the attribute in the same Word document

  Ok. I am having a brain freeze and cannot find the answer in the help of the OPA. Simple question.
  
  Is there a simple way to alias an attribute for use in Word?
  
  For example, the following two conclusions create 2 attributes where I want only 1 attribute.
  
  annual percentage rate = 6
  APR = annual percentage rate
  
  Is there a configuration option or something to alias APR as the rate of annual percentage for use in Word? I want to use in the same Word document. Something in my head tells me that I have seen that once before, but all of a sudden, I've got a brain freeze.
  
  Sorry for such a simple question, but sometimes I get too deep into the weeds.

  Hi Paul,.

  You may think the style of the legend of OPA. In the 2007 OPM Office Ribbon it's called legend of the table, but I think that it works with the rules of non-table in Word as well - it is certainly used to.

  It's a style of OPA rule which can be used when you want to refer to an abridged version of an attribute, for example "APR" rather than "the annual percentage rate. According to me, that it applies only to the immediately lower rule where it has been defined in the doc and the doc not complete.

  I did a quick search in the help of the OPM and found references to the style of legend, but I have not found a description of the functionality (search is not too good if).

  Essentially how it works...

  Above the rule to write the version abridged, then the word "is", then the text of the full attribute, for example

  APR is the annual percentage rate
  

  Side note: I have always "BOLD" the "is" in the callout line. It is not necessary, but I want to do it because it makes it more clear at a glance what part is the shorthand and which part is the text of the full attribute.

  Then apply the style of the legend of the table to the line, then put your Word table or the ordinary rule underneath, for example

  [legend]APR is the annual percentage rate
  
  the result = APR * 10 
  

  I use this feature occasionally. Usually it is when I have calculations in Word tables and I'm trying to make the more readable left column, for example using something "APR" in the formula so that it does not take much space.

  See you soon,.
  Jasmine