simple question for the first time the user: someone please be a hero

Forgive the restorative nature of this question but the FM help files are surprisingly usless for the first time and users.

I did successfully a rectangle graphic. Now, I want to put some text in the rectangle. I see that I can't just click on and type. Apparently I have to, I don't know, do a "framework" of text or something? I don't see why this is so complicated or why the help docs do not begin at the obvious base.

Please throw me a bone and wander if this. I use 9 FM, but I am sure that the version is not serious.

Thank you!

There are two possibilities to place text on a chart.

One is to use the "text tool" in which you can type a string of text whenever you click on the slider. You can format the string, but you cannot apply a character tag or a paragraph tag. And you can't put a carriage return make several lines; to do this, you need to add the additional lines of text.

The line of text tool is the letter 'A' that appears in the icons when you consider > toolbars > toolbar graphics.

Second method is to create a text frame, and then type in it. You can apply paragraph tags, tags of characters, use of CRs and so on in a text frame.

Text frame tool is the small square with several lines in, just above the "A" icon in the Graphics toolbar.

Tags: Adobe FrameMaker

Similar Questions

Last Question for the user of 95

WoodyZ and gentlemen:
Usually I can figure out how to use a program, but the mysteries of VMWare Player escape me. I want to do one last thing on PC Win 7 I am finalizing my mother (http://communities.vmware.com/thread/320855). With his degeneration macular, even with magnification, she can't see the tiny 'X' (or whatever it is another small) to close the player before you Win 7 (she insists on the turn on your PC).
I would like to place an ICON on the desktop of Windows XP which she could click and stop the virtual machine (and Win XP). While she could stop Win 7. I'm afraid I can't find out how to proceed. Can someone tell me how?
To satisfy my curiosity, that is not really important, the following also left me speechless. I created a shared folder on the host via the VMWare Player settings, active sharing this folder on the host computer, but I can not locate this folder when I'm in the guest operating system - no matter where or how I am looking (I hate Windows 7, by the way - guess I'm getting too old too...). How can I find this shared folder?
As I have indicated, the first question is important, the second is not. Thanks in advance for your help.
Joel

The short answer is to use vmrun to suspend the VM.

Take a look at: Using vmrun to control Virtual Machines

You need to install the VIX API for this. VIX API 1.10.3 software download

Then create a shortcut on the desktop of the host using the following example:
```
"C:\Program Files\VMware\VMware VIX\vmrun.exe" suspend "C:\Users\WKZ\Documents\Virtual Machines\Windows XP\Windows XP.vmx"
```
Note: If you are using the 64 bit version of Windows 7 change "C:\Program Files\... "to" C:\Program Files (x 86) \... ". »

Post edited by: WoodyZ - added a note for Windows 7 64-bit.

Also deleted example with 'stop', as it should have been 'stop' and you can use the "stop" with the "soft" option and it must perform a controlled stop however to suspend aid will allow the virtual machine so that it starts more quickly. (Refer to the documentation, vix110_vmrun_command.pdf.)

What is the best product for a first time user of WORD PRESS to design a web page of writing-blogging?

What is the best Acrobat product for a first time web page or blog page - very technical designer - to design a place to show the writing and blogging information?

You can use these options for WP blog in Muse:

http://musewidgets.com/search?q=WordPress

Thank you

Sanjit

ACS 5.1 omitting the first attempt for the user

Hi all

I am facing a problem, a strange problem with the ACS. I use 802. 1 x on my network to authenticate users. I found that when I connect my network cable and put my authentication credentials will fail directly. I turn off my connection and will again and apply the same credentials, it works perfectly. I don't know why for the first attempt, it will fail the authentication and it will tell that (24217 host is not in the internal host identity store). You can see the table below showing the first attempt failed, but the second attempt successful for the user (testuser).

DEC 6, 10 PM 1:31:11.656 - testuser 00-12-AE-7A-69-N6 Default network access PEAP (EAP-MSCHAPv2) Dot1x-3560-Switch 1.2.3.4 FastEthernet0/8 TESTACS

DEC 6, 10 PM 1:30:43.393

testuser

00-12-AE-7A-69-N6

Default network access

PEAP

Dot1x-3560-Switch

1.2.3.4

FastEthernet0/8

TESTACS

24217 l'hôte ne se trouve pas dans le magasin d'identités hôtes internes.

Please find the picture as an attachment to the (sequence of identity store)

Any help is appreciated

Thanks in advance,

Hello

in your sequence of identity store, I would suggest that you remove everything from the text box below, called "recovery of additional attributes.

Nicolas

===

Remember responses of the rate that you find useful

Configuring the private network or disable questions for the network discovery in network and sharing Center.

I just got my laptop all cleaned and had everything updated. When I got it back I was mainly concerned how my network and discovery sharing would work, because we never had a home computer and a laptop computer at a time. Our PC at home has always defined for a private network. Today, they are both defined for the private sector, the laptop will probably always be at home too, but I was curious to see how the printer share everything would work on my laptop. It would not print and I checked just the settings that the guy I of any program for me usually had the top settings. On my laptop that I was first checking out and the network discovery has been to custom on both, one on my PC was on, laptop has never been verified we or off, file sharing has been enabled on both. public folder sharing off on both, printer sharing turned off the PC at home, but on laptop, so much time, I guess me to turn on the PC I don't know yet. Printer password sharing is on the PC and laptop. I try essentially whether it is what you would call a custom setting make for a firewall setting, or could someone please just kinda tell me if the sharing of network discovery should be turned on on the laptop and the PC, or was it not suppose to be turned on to the laptop, but on the PC only? Which should be lit and which should not be enabled in the configuration of the private network? I just want to be able to print my laptop if I want to. Thank you

[Moved from the community centre of Participation]

Hello

What version of Windows are you using?

This article was written for the two Windows Vista & Windows 7. Drop-down menu (right) allows you to activate Windows Vista Instructions.

http://Windows.Microsoft.com/en-us/Windows/install-printer-home-network#1TC=Windows-7

Wait for the user to select the OK button

For my application, I can't use a simple MessagePopup where the user must select the OK button to continue.

I created a new Panel with just a text message and an OK button to act as a MessagePopup.

When I call InstallPopup and the box pops up that I have to wait until the user selects OK before continuing as the MessagePopup.

How can I accomplish this?

Thank you!

John W.

The popup has no effect on the mouse: it can happen that you have a function that manipulates the cursor before the popup is displayed? A SetWaitCursor (1); would be sufficient.

HP laserjet 1022 does not wait for the user to turn the pages when printing double-sided

My Hp laserjet 1022 printer working properly for years.

So far, when he executed more paper he tried a couple of times to get more paper and then stops with a message on the PC it is out of paper.

Very annoyingly, this has changed recently, now when it is out of paper, he tries a couple of times to get more paper and watch the message on the PC, saying that it is paper and then again, try a couple of times to get more paper and again shows the same message on the PC and him back... This continues to go on and on.

It's especially annoying when trying to print double-sided. Before he used to stop and ask you to turn the pages to print the other side. Now the previous behavior overrides the break to turn the pages and keeps it will try to get more paper. As now, it does not wait for the user to turn the pages, in general it spoils the impression out by getting another paper that is not what I wanted, he drives me crazy! It's really hard to print anything double face now.

All solutions?

Operating system is Windows 7, I just downloaded and installed the latest driver for this printer "2013-01-09, Version: 20120918" and I get the same behavior. In the properties of the printer that I put some State Messages to Off and at least I don't get the full windows message screen poping up every time the printer is trying again to get more paper. I have not found all the other parameters that may affect this behavior.

Help!

Hello

I solved the problem! I found the original CD for the printer. I uninstall the current driver and then install CD and now when the printer is out of paper trying to get paper a couple of times and then stops, as it used to be.

Thanks for your help.

Martin

PRVF-4007: verification of equivalence for the user failed

Hello everyone,

I work a 2 node RAC installation, I installed CARS many times before, but I just ran the script with these settings

runcluvfy.sh stage pre - crsinst - n rac1, rac2-verbose

The last time I ran it I don't have these errors, but I think I used the user account name "oracle."

but this time I'm using another account of Linux, you have to use the name real = oracle for the account name?

The Linux account I use is not called "oracle".

This is the error I get when I run the script...

[oradest@rac1 grid] stage pre - crsinst - n rac1, rac2-verbose $./runcluvfy.sh

Conducting due diligence to install cluster services

Audit accessibility of node...

Check: Accessibility of node of the node "rac1.

Accessible destination node?

------------------------------------ ------------------------

rac2 yes

rac1 yes

Result: Check accessibility node from node "rac1.

Verify the equivalence of the user...

Check: Equivalence of the user for the user "oradest".

Comment by node name

------------------------------------ ------------------------

Rac2 failed

RAC1 failed

Result: PRVF-4007: user equivalence verification failed for user 'oradest '.

ERROR:

Not available on all specified nodes user equivalence

Verification can take place

Check prior to the installation of cluster service failed on all nodes.

Yes, you can use a separate account (e.g. "grid"). In fact, I always recommend a separate account, especially from 11 GR 2.

Must user equivalence be configured. It is documented in the installation guide. You can use the installer universal to facility user equivalence if you don't want to do it manually.

Hemant K Collette

PRVF-4007: failure of verification of equivalence for the user "grid."

All,

I have install the equivalence of SSH user between 2 node RAC (ushdc8498, ushdc8499) and able to ssh without password to other nodes.

The servers in the AIX operating system.

But still my runcluvfy.sh fails with the following message: -.

[grid ushdc8498] / u01/app/Oracle_Software/grid stage pre - crsinst - n ushdc8498, ushdc8499 #./runcluvfy.sh

Conducting due diligence to install cluster services

Audit accessibility of node...

Verification of accessibility node from node 'ushdc8498 '.

Verify the equivalence of the user...

PRVF-4007: failure of verification of equivalence for the user "grid."

The test failed on the nodes:

ushdc8498

CAUTION:

Equivalence of the user is not defined for nodes:

ushdc8498

Audit will proceed to nodes:

ushdc8499

Version of exectask could not be retrieved from the node 'ushdc8499 '.

ERROR:

Framework for installation verification failed on all nodes

Verification can take place

Check prior to the installation of cluster service failed on all nodes.

Thank you

Mahi

Thank you all, I'm able to resolve the problem.

It seems that the problem is with the software. I downloaded the new software fresh and re-directed runcluvfy.sh. This time, he threw the error/usr/bin/scp was not there, but it's there.

So, I deleted the file/usr/bin/scp of the two nodes and recreated link/opt/pware64/bin/scp/usr/bin/scp and rerun runcluvfy.sh.

Now he went well without any warnings.

Thank you for your support.

Thank you

Mahi

How to enable detailed interactive report view by default for the user public?

Hi all

I'm developing a page of search results.

I'm doing a view instead of a default table view of interactive reports. So in this case I activated the details view so that I could make the fancy designs.

everything worked well and looked clean but however when I pass the value of my search using IR_ROWFILTER page and clear the results page using page_noIRB, it brings me to the result page of interactive reports with the default table as point of view.

I have to press the detailed view to get. I tried to save it as a default value, but it won't work. This question is for user public.

If I do the page requires authentication, and record the detail by default view, I wouldn't have any problem. I could search and it will bring directly in to the detail view of the search page.

of course, the other reason that I found is because im using the IR_ROWFILTER and by disabling the page using page_noIRB... without it, it works well, but I need it coz im making a a search result. I need to send the text to search for another page and put it in the filter to the search page. I would need to use the IRB to search again.

is this a limitation to the user public? It happened for the authenticated user but...

How can I make the default view for the user public?

T101_cyberdyne wrote:

How can I make the default view for the user public?

Reverse the report for details on the loading of the page using a dynamic action of loading the Page with the following Execute the JavaScript Code real action:

gReport.data.view('DETAIL');

I'm doing a view instead of a default table view of interactive reports. So in this case I activated the details view so that I could make the fancy designs.

Do you really need is an IR? Other that the layout of detail, do you need any of the interactive features? If not, try to use a standard report with a a report model custom.

ERROR: Cannot open the data source for the user

Hello, I followed the instructions in the URL below

http://gavinsoorma.com/2010/02/GoldenGate-installation-Oracle-11g-on-Red-Hat-Linux/

and I get the ERROR: cannot open the data source for the user

I run the sql for the role but nothing

any ideas please.

Sun solaris operating system
database version 9.2.0.7

Previous question that you were:
Where did you get the GoldenGate for Oracle 9i software?

I have a simple question about the meta-data.

Hello. It is a simple question about the meta-data. How can I get the video bitrate of a flv or mp4 (video playing via NetStream file) file

right now I have this:

Code
var netClient:Object = new Object(); netClient.onMetaData = function(meta:Object) { for (var in meta props) {} trace (props + ":" + meta [props]); } MovieClip (root) .durations = meta.duration; trace (MovieClip (root) .durations); }; NS.client = netClient;

And my output is:

videocodecid: avc1
audiocodecid: m4as
aacaot: 2
Width: 960
AudioChannels: 2
videoframerate: 23.976
TrackInfo: [object Object], [object Object]
moovposition: 32
avcprofile: 77
audiosamplerate: 48000
avclevel: 31
seekpoints: [object Object], [object Object], [object Object], [object Object]
height: 540
Duration: 221.312

As you can see, there is nothing of video bitrate.

I know that the video bitrate of my videos, but then I have to manually type each number of bitrate into my flash project, and it would be such a fuss when I have a lot of videos. Would be nice if flash can detect the video bitrate.

It's for my online portfolio.

Why you divide by 8? If you want to convert bytes into bits, multiply by 8.

Wrong password for the user

I read 2 day s/n. Now, I'm Chapter 9. I want to read and practice.
1. I open Enterprise Manager
2. then enter username: sys
password: *.
3 Enterprise Manager opened.
4. then I opened the backup schedule Page
5 but when I enter username and password and click Ok this time appeared:

Error - connection to the host as user sys failed: ERROR: wrong password for the user

I did it with also HR user.
This time appeared
Error - connection to the host as user hr has failed: ERROR: wrong password for the user

Because you must use
The host credentials. It is not oracle usename, it's operating system user account.
under linux, you can use oracle (membership group DBA) user in windows as administrator
in windows, run parameters-online control panel > administration tools-online DCA political security-online user rights => logon as a work of bach and then add your OS user here.

Published by: admin on May 5, 2010 02:40

Question for the geniuses of pictures only.

You see, I started with iPhoto and later began to use Aperture. With iPhoto and Aperture, you can have ALL the metadata below the thumbnails, (nice). Well, I put all my images descriptions in the keywords section because it didn't really matter, because these programs could show them as thumbnails.

Now, I use this wonderful program of Photos and I found out that it will ONLY show the title of"the image in the thumbnails. I've got on 30 000 images with keywords but no title. I want to move / copy the text in the keywords section in the section of the title. I'm not a computer scientist, I guess that my skills are in average. But I can follow directions.

Suggestions appreciated.

Member of ASC compiled some useful on Photos AppleScripts. Maybe one of them will be sufficiently close to your needs.

http://www.oldtoadstutorials.NET/no.P01.html

Download firefox 10, Setup asked for the user account, enter the type of w/admin myPC, firefox exit installtion (Toshiba A665/I7/windoe 7)

My computer is Toshiba A665 w/Intel core I7 and Windows 7 installed. When I run the installer of firefox 10, he asked for the user account ID and password. I entered the name of the computer that is mine with admin enter the account and a correct password. Installation of Firefox to quit smoking. No screen / another reply?

Hello

Please try a right click on the downloaded file and select run as administrator.

simple question for the first time the user: someone please be a hero

Similar Questions

Maybe you are looking for