Simple? to restrict users to connect to the DB

Similar Questions

• Cisco NAC appliance - after a success does not change users to connect to the vlan propper

  Hello

  I am new to cisco NAC BURNERS and I have to troubleshoot an implementation. It is a real OOB IP gateway configuration. Users can connect to the Pentecost the CCA, but after the connection of this success, they remain on the role not authenticated, as well as on this vlan. I checked the SNMP protocol and seems to work very well. Also, I checked the logs on nac_manager.log and there is nothing surprising, in fact I see nothing about this user or IP address that connects.

  Also the user does not appear on the list of users online on cam.

  Can someone help me figure out how can I fix? version 4.8, I'll post any information requested

  Thank you

  We recently had the problem with Windows AD SSO and Windows 7 clients.

  Would authenticate the XP clients very well, however, Windows 7 clients would not authenticate and will remain just on the authenticated vlan.

  Our question was looking for CASE SSO account, we installed on AD. It only support the encryption, WHICH has no Windows 7 64. We turned off "Use OF THE encryption" on the account authentication UNIQUE AD and re-tested.

  What are the parameters of the port-profile to which is applied the switchport?

  What is the map settings vlan ports trunk not approved or confidence?

• Agent using which the user will connect to the file server?

  Hello

  We have installed odi stanalone agent on the file server. This autonomous agent using which the user will connect to the file server?

  Thank you

  Kondo.

  The user who started the agent in this server.

  Thank you

  Chantal

• Desktop sharing, allow two users to connect on the same desktop

  Does anyone know if view Horizon be configured in such a way that:

  -Two (or more) users can connect on the same desktop

  -vSGA can still be used

  The reason why I ask, is that in my area there is a request for collaboration in which two people on different locations want to go through a 3D medical treatment plan and discuss on the phone. Documentation of the Horizon does not say that it can, but it does not say that he can't.

  There is nothing on the Horizon that would in native mode.  You must use a product type to have two people viewing the same third party screen sharing office.

• howmany oracle user to connect with the oracle server.

  Hi all
  
  howmany oracle user to connect with the oracle server.
  I want to search for above sentence.

  Select the user name, count (*) from v$ session group by user name;

• Draw the users currently connected to the Application

  Hello
  I want to see the list of users currently connected to the Application.
  
  I had put the Option 'Sign-On Audit' profile to the level of "Mule".
  
  Now I am tracking in the database using option "security: users-> monitor ' and yet the below sql query. I get a different output of two channels.
  
  Select distinct fu.user_name User_Name, fr. RESPONSIBILITY_KEY responsibility
  of fnd_user fu, fnd_responsibility en, icx_sessions ic
  where fu.user_id = ic.user_id AND
  Fr.responsibility_id = ic.responsibility_id AND
  IC.disabled_flag =' no AND
  IC.responsibility_id is not null AND
  IC.last_connect such as sysdate;
  
  Please let me know how to check the users currently connected to the application and their connected at the time.
  
  Thanks and greetings
  Amith

  After successfully completing the 'Purge Signon Audit' request I tried to track users, it shows all users connected to the Application today. He does ' t display the users who are currently connected to the application server.

  This is expected behavior since you have "ic.last_connect such as sysdate;" in your query. If you want to check the users that are connect in the latter in the past (15/30 minutes or 1 hour), please refer to:

  Note: How 295206.1 - Total number of users connected to ORACLE Application
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=295206.1

• How can I run a program with win xp have a restricted user account type in the title of windows 2003 Server domain controller?

  Dear all,

  I have a windows 2003 server and I have a domain controlor.

  I have win xp use in this field, the account type for these users are not administrator users and restricted users.

  When I need to install a program in any of these workstations, I need to disconnect the user restucted and the journal as an administrator user.  When installation is finished, I can run this program from the administrator user but when I closing session and connection for users user restruct I can not run this program and an error.

  My question is: How can I use this program with the user of gods?

  Thank you

  You would be better that tag on your workstation
  Windows Server - how to configure the group policy in windows server 2003 to remove the start in the start menu to xp pro user Expert MowGreen Windows IT Pro - consumer safety

• How do you keep users to connect via the desktop remotely on another?

  Use: Windows 2008 R2
  Connection method: connection Remote Desktop

  We have users insist on granting of their login and password to another user if that person can connect. Even when they have their own login!

  So what happens is the the two #1 can be saved in on the job server all log in user #2 in the server, with the same login, closing at #1. While I can only educate them to use their own connections, so the saying goes, you can lead a horse to water, but you cannot make them drink. :(

  What I have and I'm not finding, is a way to have the system notify User #2 that login is already in use, try again later.  I would like to accomplish this through Group Policy.

  Thanks in advance for any help!

  Jack W.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Standard user can connect to the new network wireless only in local mode - no Internet pass through by the router.

  My wife now takes a laptop (HP Pavilion) with her on a business trip.  The computer that runs Windows Vista Ultimate 64-bit SP2 with all updates.  I have his set as a standard user account, just to keep him out of trouble.  However, with his own account, it can connect to a new wireless network, like a hotel or business she visits could offer.  But, invariably, she gets access 'local only' - no pass Internet through connectivity.  I had to give him the information of my account as an administrator, and then she is able to connect without difficulty.

  Of course, this isn't an ideal situation - standard user must be able to connect to the Internet through a new wireless network.  Otherwise, I should be able to change his account in such a way that it can be given to this authority without necessarily opening the entire system and its related vulnerabilities.
  Any help, suggestions or solutions?

  Hello

  I suggest you go through the information provided in the following link.

  http://TechNet.Microsoft.com/en-us/library/bb878035.aspx

• users and internet accounts. -Account that a single user can connect to the Internet at the same time

  When I am connected to the computer, and I 'switch user' other user accounts, cannot connect to the internet, unless I have complelty "log off." How can I fix? I should be able to stay connected with the windows open, so I can continue when I get back.

  I should be able to stay connected with the windows open, so I can continue when I get back.

  It depends on your network, there'S no connection.  For example, it could certainly happen to a user who was logged only under that user.   However, in this case instead of completely disconnected the first account you could probably have the first account log out and hang up the connection.  Then the second account probably could dial and connect.  FWIW, I think a DSL PPPoE user might see similar symptoms.

  Robert Aldwinckle
  ---

• 2 of the 3 users cannot connect to the net

  Problem suddenly "(il y a 3 jours), 2 users on this computer cannot connect to the internet." I am registered as an administrator and I am very well but 2 members of my family are unable to connect with their names.

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  Mick Murphy - Microsoft partner

• need help to allow users to connect to the site in order to change/edit text OR pdf files

  I wrote a site for a restaurant, and the i I try to insert some kind of widget / or other means, in order to allow the restaurant manager to connect to the site to edit menu. Ideally I'd like admin users to be able to connect to download in format pdf of the menu, I have google for hours... and just can't find a way to do it! Help me please guys, I'm very new to the scene, so sorry if my explanation is bad or my incorrect terminology. Thanks for the help in advance guys!

  Cushy CMS can be just what you need for this (see their video to see how it works).

  http://www.CushyCMS.com

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• 63 error to TCP connection open in Simple data Client.vi when connecting to the network storage device.

  Hello

  I tried the simple data client and simple example of data server. I tried this example to connect to a NAS device. My laptop properly communicates with the device since I ping the address of the NAS device and discovered it works perfectly fine. Also, I put the static IP of my pc even as the NAS. So everything I've done. But when I run the program giving the ip address of a NAS device, it shows an error 63.

  Error 63 to TCP connection open in Simple data Client.vi

  Possible reasons: LabVIEW: serial port receive buffer overflow. = LabVIEW: the network connection was refused by the server.

  Why is happening. What can be done to solve this problem. Thanking you.

  vindsan wrote:

  What is the firewall of the SIN.

  Yes, it is very likely. Try disabling the firewall and try again. If the code works when you run the Server & client on your machine, but not when you run the server on your NAS and client on your machine (assuming you have entered the correct port for the NAS server), then it is very likely to be a firewall problem.

  vindsan wrote:

  Server that is listening is no longer VI also means what.

  Your VI server listens only once for a connection after receiving an incoming connection (or it expires after 60 years), he stops listening and the port will be more open for incoming connections - you must re - run the VI for another connection. With your code, you must run the VI server and then run the VI client in the 1960s, so it's not expire.

• Can I block the user to connect to the VPN 3030 by type of customer or version?

  I would like to block some users who use to connect to our VPN 3030 client Win98 or very old version of VPN client.

  Is there a way to set up my VPN 3030 so I can block customers? I don't want to push new customer for them or that you don't have a server radius or something like that to put them on an isolated network independent.

  I want to configure VPN 3030, is it possible?

  Thank you.

  Jayesh,

  Reach:

  Configuration | User management | Groups

  Go to the specific group and click on modify.

  On the IPSec tab, you will see a section for:

  Customer type & Version limiting

  For example:

  p *: 4.7*

  This will allow the version 4.7 of customers.

  See you soon

  Gilbert

  Write it down, if it can help

• Jabber user cannot connect using the AD account

  Hello

  I have a question about jabber/movi registering on local control of the VCS. They can't log in using their Jabber account on the control of VCS that have been configured on TMSPE. The connection error message is ' user/password incorrect or field name '...

  Jabber users who were configured manually on the TMS can sign in successfully.

  Connection between TMS and AD is ok and import AD users successfully.

  What should be the correct configuration on the authentication policy control VCS?

  > Sub-area by default?

  > Deafault area?

  > The traversal area?

  I also need to plug the VCS control on the announcement?

  Thank you

  Acevirgil

  "Verify the identification information" on the three - and Yes, the VCS - C needs to be added to our era.

  /Jens

  Please note the answers and score the questions "Answered" as appropriate.