simple xcopy of a file fails with "Access denied" on Windows 7 Professional

Similar Questions

• iDRAC 7 launch Virtual Console fails with access denied error

  Hello

  whenever I try to launch the idrac video console 7, it fails with an "Access denied" error it's weird because I'm connected to the idrac as superuser. I use JDK 1.6. I tried through different browsers and I still get the same error.

  Found the same problem after an update of the Firmware to iDRAC.

  To address I created a new user account and permissions of base. Seems "Access Virtual Console" even when checked permissions do not actually post update.

• Pavillion 500-368na: ERROR of UEFI: verification failed (15) access denied

  Since today when I start or restart my PC, I immediately get a blue screen that says:

  Verification failed: (15) access denied

  I press return to enter 'OK' and get another blue screen called "Shim UEFI key management.

  I gives me 3 options: continue start; Register the disk key; Enter the hash of the disc

  If I select Register hash/key I have a long list - I tried selecting some of them, but the key is not found [message: only the encoded DER certificate (*.cer/der/crt) is supported].

  If I select continue starting I boot directly into Windows 8.1 (64-bit) despite my system dual-boot with a Linux distribution (and work with Linux and Windows perfectly until today). Every time I have start or restart, I have to go through this same sequence and can only start Windows.

  Info additional possiblly important:

  (1) I was prompted to upgrade to Windows 10 but have not yet done yet - I "hide" the 8.1-> upgrade option 10.

  (2) yesterday (i.e. just before this problem appeared) the HP Support Assistant "HP PC Hardware Diagnostics UEFI" updated version 5.8.2.0

  At any expert UEFI tips to overcome this problem of access denied or tell me how to register the key that seems to be lost for some reason?

  Thank you very much.

  Hello

  Looks like you have a GRUB that there is little support on this forum to deliver.  You could try the Linux forum.

• Error deleting file or folder. access denied

  Error deleting file or folder. access denied

  try to do it via safe mode.

  DB·´¯'·.. ¸ > DatabaseBen, Retired Professional - Analyst - Database Developer's - accounting - former veteran of the Armed Forces - @Hotmail.com 'share nirvana mann' - dbZen ~ ~ ~ >

• When you back up my files I get access denied (0 x 8007005) can it be repaired

  When you back up my files I get access denied (0 x 8007005) I can fix this so I can save, if so how

  Hello

  1 did you do changes on the computer before the show?
  2 are logged as administrator?

  You can disable the antivirus software and then try to perform the backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: The computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem

• The file 'Asms' on the CD-ROM Windows XP Professional is required

  Original title: asms

  Hai,

  When I do install o/s new in my PC it is problem continues to recover on continuously, then after he disappeared like installation almost complete 3 minutes then after restalling again and again, but now asking that the file 'asms' on the CD of Windows XP Professional service Pack 3 is required

  Type the path where the file is located, and then click OK.

  What was the problem even I gave exact path then also give the same error again.

  Help me solve this problem.

  [the topic was 'malware error]

  [moved from viruses and malware area forum]

  Hello

  Try this fix for the problem of 'asms ':

  http://support.Microsoft.com/kb/311755

• Cannot access files locked with access TrueSuite Manager

  I have files with Access Manager TrueSuite locked. My Windows bug and now I cannot access these files locked.
  When you try to unlock, I get the error and I can not read these documents.

  Thank you.
  Excuse my bad English.

  I found this document:

  Useful information about the file protection with AuthenTec fingerprint software
  http://APS2.toshiba-tro.de/KB0/TSB9C02RC0001R01.htm

  Eventually, you will not be able to unprotect the files again
  But try this backup data to the external HARD drive or somewhere else.
  Then reinstall this software and import data from external source.
  Then try to unlock this new

• Open file failed with webstart unsigned application

  Hello
  
  Is it possible to open a document in the base application registered user (on the operating system) to an unsigned Java webstart application?
  I don't mind if the user receives a warning, but the only thing I found was the ability to save a file (also with a warning to the user), but I would like to automatically open the document generated by the webstart application in the default application on the operating system that is recorded for the file association. In this case, either a file *.xml or *.xlsx (Excel/OpenOffice)
  
  Any ideas?

  You can use BasicService.showDocument () to do this, but you will get a white windows open in the default browser.

• run_job fails with permission denied for an executable work as a non - dba user

  I am running Oracle 10.2.0.4 on RHEL 5.5 32-bit and seeks to convert some of Oracle Scheduler cron tasks, but get a permission denied error during the execution of the work.
  
  To simplify things as much as possible, the below shows a work with a call to an executable shell script. The shell script was simply a calendar of Unix command, however, so it works from the command line, as well as the command-line as 'oracle' user, I get the following error:
  
  TEST: OPS$ BATCH_USER > exec dbms_scheduler.run_job ('my_test_job');
  BEGIN dbms_scheduler.run_job ('my_test_job'); END;
  
  ERROR on line 1:
  ORA-27370: slave to the job could not launch an EXECUTABLE type work
  ORA-27300: dependent operation of the OS system: access to the wrapper of extjob failed with status: 13
  ORA-27301: OS Error Message: permission denied
  ORA-27302: an error occurred at: sjsec 3
  ORA-06512: at "SYS." DBMS_ISCHED", line 150
  ORA-06512: at "SYS." DBMS_SCHEDULER', line 441
  ORA-06512: at line 1
  
  I noticed that if I create work under another account Unix which is the dba group and update the externaljob.ora run_user and run_group = s/n, the task runs without error.
  
  I assume that it is possible to run executable tasks in o/s as a group of users outside the dba (or oinstall)?
  
  Below are the details of what I did. If you would be grateful if someone can point me in the right direction. My apologies if I'm missing something obvious here...
  

  Create simple job
  
  TEST: OPS$BATCH_USER > !cat create_test_job.sql
  begin
    dbms_scheduler.create_job (
      job_name            => 'my_test_job',
      job_type            => 'EXECUTABLE',
      job_action          => '/home/batch_user/dba/v2_dba_tasks/run_script.sh',
      start_date          => NULL,
      repeat_interval     => 'freq=daily; byhour=8; byminute=30',
      end_date            => NULL,
      enabled             => TRUE);
  end;
  /
  
  TEST: OPS$BATCH_USER > @create_test_job
  
  PL/SQL procedure successfully completed.
  
  File permissions...
  -rw-r--r-- 1 root oinstall 1537 Feb 28 13:38 /u04/oracle/product/10.2.0/db_1/rdbms/admin/externaljob.ora
  -rwsr-x--- 1 root   oinstall 871282 Aug 22  2010 /u04/oracle/product/10.2.0/db_1/bin/extjob
  -rwx------ 1 oracle oinstall 871282 Aug 22  2010 /u04/oracle/product/10.2.0/db_1/bin/extjobo
  -rws--s--x 1 nobody nobody   871322 Jan 28  2009 /u04/oracle/product/10.2.0/db_1/bin/extjobO
  -rwx------ 1 oracle oinstall 871322 Jan 28  2009 /u04/oracle/product/10.2.0/db_1/bin/extjoboO
  -rwxr-x--x 1 oracle oinstall  29910 Aug 22  2010 /u04/oracle/product/10.2.0/db_1/bin/extproc
  -rwxr-x--x 1 oracle oinstall  30130 Jan 28  2009 /u04/oracle/product/10.2.0/db_1/bin/extprocO
  -rwxr-xr-x 1 oracle oinstall    327 Jan 28  2009 /u04/oracle/product/10.2.0/db_1/bin/extusrupgrade
  
  
  For testing, I'm just doing a Unix calendar command...
  [batch_user@test v2_dba_tasks]$ cat run_script.sh 
  #!/bin/sh
  
  /usr/bin/cal
  
  
  Contents of $ORACLE_HOME/rdbms/admin/externaljob.ora...
  [root@test admin]# grep '^run' externaljob.ora 
  run_user = batch_user
  run_group = comp
  
  The Unix account is not in the dba or orainst group ('comp' group only).
  
  Run from O/S...
  [batch_user@test v2_dba_tasks]$ ./run_script.sh 
     February 2011    
  Su Mo Tu We Th Fr Sa
         1  2  3  4  5
   6  7  8  9 10 11 12
  13 14 15 16 17 18 19
  20 21 22 23 24 25 26
  27 28
  
  Run as 'oracle' user...
  [oracle@test v2_dba_tasks]$ ./run_script.sh 
     February 2011    
  Su Mo Tu We Th Fr Sa
         1  2  3  4  5
   6  7  8  9 10 11 12
  13 14 15 16 17 18 19
  20 21 22 23 24 25 26
  27 28
  
  But running from scheduler results in error...
  TEST: OPS$BATCH_USER > exec dbms_scheduler.run_job('my_test_job');
  BEGIN dbms_scheduler.run_job('my_test_job'); END;
  
  *
  ERROR at line 1:
  ORA-27370: job slave failed to launch a job of type EXECUTABLE
  ORA-27300: OS system dependent operation:accessing extjob wrapper failed with status: 13
  ORA-27301: OS failure message: Permission denied
  ORA-27302: failure occurred at: sjsec 3
  ORA-06512: at "SYS.DBMS_ISCHED", line 150
  ORA-06512: at "SYS.DBMS_SCHEDULER", line 441
  ORA-06512: at line 1

  Hello

  The run_user specified in externaljob.ora don't have to be a member of the oinstall group.

  I think you can run into a problem specific to run_job with use_current_session-online set to true when the local OS user running sqlplus is not a member of oinstall.

  The same error occurs with a background task run (for example use_current_session-online fake)? Occur if you are using sqlplus from another machine?

  Thank you
  Ravi.

• backup failed: 0x80070005 access denied

  For the last few months when I try to save on DVD my computer is progressing well and uses 9 discs but then finally ends with "backup failed."  The reason given is "0 x 8007005 access denied."  Someone understands this.  What can do to sort it?

  Mamahilz

  Disable your antivirus and any other security program when you perform the backup.  Run the backup administrator.  Delete the compressed backup selection files.  Not back up anything other than your C:\ drive

  Under your administrator account, recover rights fulll and take ownerhip of the totality of the C:\ drive using the following procedures.  If you can not make some folders, ignore them in greater numbers of them aren't as you can.

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  See if it works - otherwise we will check for a different solution.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• What should I do with the ISO of Windows 7 Professional file that I downloaded. How can I install this?

  original title: WHAT KIND OF FILE IS EN_WINDOWS_7_PROFESSIONAL_X64_dvd_x15 - 65805.iso

  WHAT TYPE OF FILE IS: EN_WINDOWS_7_PROFESSIONAL_X64_dvd_x15 - 65805.iso

  Hello

  Through my college, Microsoft had a complementary offer for students of computer class download software among several offered on the site: MSDN Academic Alliance Software Center Microsoft.

  I tried to download Windows 7 Professional. But I don't know how to download correctly. We offer time-limited from Microsoft. Now, I'm not going to school, so my school can not help me with the download of related issues.

  I have this file-(EN_WINDOWS_7_PROFESSIONAL_X64_dvd_x15 - 65805.iso) recorded on in the Temp folder on the C drive of my computer. But I don't know what the right file? Should I burn to DVD? File size is 41.4 MB.

  Can someone help me with this? If this is the right file? If so, then can I've burn it to DVD and save it for later installation on my computer?

  Prompt response will be appreciated.

  Thank you.

  YM

  By its name, it is the image ISO of the DVD Windows 7 Professional 64-bit (English language).

  Depending on the size, (41.4 MB according to you), it is incomplete by many and of no use.

• Windows Update fails with Error 0x80072F76 on Windows 2003 server number

  I try to run windows update on my windows 2003 server. The update fails with number 0x80072F76 Errow. The Windows Firewall/Internet service Connection Sharing (ICS) is stopped and the security settings on IE is set by default. IE version is 8. The Windows Update screen is also not displayed correctly.

  You talk about servers, you use WSUS?

  Forum specific support by WSUS:
  http://social.technet.Microsoft.com/forums/en-us/winserverwsus/threads

• update fails with the ccr 800b0100 windows 2008 cluster

  Hello world!!! I hope you stay warm...

  I have a windows 2008 sp1 64-bit server that is running Exchange 2007 sp1 on a passive node of a CCR cluster... There are 2 groups in our org, all other servers update very well... windows firewall is disabled...

  I had one "update failed 800 b 0100" run windows update to KB969947 (which is successfully installed on all machines)...

  followed by all scenarios http://support.microsoft.com/kb/947366 ... even uninstalled my Symantec Mail Security 6 on this node... always the update fails...

  Let me know if you need more information...

  Here is the output of the system update tool...

  =================================
  Preparation of control system was updated.
  Binary version 6.0.6002.22202
  Package Version 6.0
  2010-01-14 08:07

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB969947_server_0~31bf3856ad364e35~amd64~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB969947_server~31bf3856ad364e35~amd64~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB969947~31bf3856ad364e35~amd64~~6.0.1.0.mum

  Control components store

  Summary:
  Seconds executed: 391
  Found 3 errors
  CBS MUM lack count: 3

  Unavailable repair files:
  servicing\packages\Package_for_KB969947_server_0~31bf3856ad364e35~AMD64~~6.0.1.0.mum
  servicing\packages\Package_for_KB969947_server~31bf3856ad364e35~AMD64~~6.0.1.0.mum
  servicing\packages\Package_for_KB969947~31bf3856ad364e35~AMD64~~6.0.1.0.mum
  servicing\packages\Package_for_KB969947_server_0~31bf3856ad364e35~AMD64~~6.0.1.0.cat
  servicing\packages\Package_for_KB969947_server~31bf3856ad364e35~AMD64~~6.0.1.0.cat
  servicing\packages\Package_for_KB969947~31bf3856ad364e35~AMD64~~6.0.1.0.cat

  Customer experience report downloaded successfully.  Thank you for your participation.  For more information, see the Microsoft Customer Experience Improvement Program on the Microsoft web site.

  FOR INFO:

  
  Frequently asked questions about the vulnerability of the Win32k - CVE-2009-2513 insufficient data Validation

  What systems are primarily exposed to this vulnerability?

  Workstations and servers terminal Server is mainly threatened. Servers could be at risk if administrators allow users to connect to servers and to run programs. However, best practices discourage you to allow this.
  
  Source: http://www.microsoft.com/technet/security/bulletin/MS09-065.mspx ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Failed with unknown error 80070490 Windows Update

  Update Windows guard fails with unknown error 80070490 when trying to install to install the important updates made automatically by Windows Update. Having this problem since February 10

  http://support.Microsoft.com/kb/958044

  'You receive a "0 x 80070490" error code when you use Microsoft Update or Windows Update Web sites to install updates'

  Method 1: run (Checksur.exe) system update readiness tool

  1. Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information on how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:
     947821 (http://support.microsoft.com/kb/947821/) Description of the system update tool for Windows Vista, Windows Server 2008, Windows 7 and Windows Server 2008 R2

     http://support.Microsoft.com/kb/947821/

     Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  2. Try to install updates again.

  Method 2: perform a Windows repair installation

  If method 1 does not resolve this problem, you must perform a repair installation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2. Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.

  See you soon.

  Mick Murphy - Microsoft partner

• Access denied to windows 7 take ownership

  Trying to remove a generated file access denied error

  Right click, select Properties

  Select the Security tab that shows "to continue, you must be an administrative user...". "Do you want to continue? »

  Continue generates the dialogue of security advanced with only the owner owner current tab is "Unable to display current owner" so I select my account (I'm Admin) and apply but get "cannot create the new owner on folder_name ' 'access denied '.

  In other words, I need the value of property in order to set permissions, but I can not because I do not have the required permissions.

  Just for the record exactly where and under what name is this folder?

  You can use it on personal folders,

  http://www.Vistax64.com/tutorials/112795-context-menu-take-ownership.html