backup failed: 0x80070005 access denied

Similar Questions

• backup failed error access denied 0 x 800700005

  Home premium Vista 32

  Hello

  Please repost the link that is specific to the issues of backup below in the microsoft forum

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• Pavillion 500-368na: ERROR of UEFI: verification failed (15) access denied

  Since today when I start or restart my PC, I immediately get a blue screen that says:

  Verification failed: (15) access denied

  I press return to enter 'OK' and get another blue screen called "Shim UEFI key management.

  I gives me 3 options: continue start; Register the disk key; Enter the hash of the disc

  If I select Register hash/key I have a long list - I tried selecting some of them, but the key is not found [message: only the encoded DER certificate (*.cer/der/crt) is supported].

  If I select continue starting I boot directly into Windows 8.1 (64-bit) despite my system dual-boot with a Linux distribution (and work with Linux and Windows perfectly until today). Every time I have start or restart, I have to go through this same sequence and can only start Windows.

  Info additional possiblly important:

  (1) I was prompted to upgrade to Windows 10 but have not yet done yet - I "hide" the 8.1-> upgrade option 10.

  (2) yesterday (i.e. just before this problem appeared) the HP Support Assistant "HP PC Hardware Diagnostics UEFI" updated version 5.8.2.0

  At any expert UEFI tips to overcome this problem of access denied or tell me how to register the key that seems to be lost for some reason?

  Thank you very much.

  Hello

  Looks like you have a GRUB that there is little support on this forum to deliver.  You could try the Linux forum.

• Compatible Windows Vista backup the failed 0x80070005: access is denied

  I am more able to backup my PC.  It fails with a 0 x 80070005 (access) refused.  I carefully watched the backup trying to glean what file fails when it tries to read it for the backup.  It fails on a file on the C: drive, but it happens too fast.  I can't determine the file name and THE EVENT LOG IS NOT THE NAME OF THE LOG FILE.  I have no idea how to solve this problem. My last successful backup was dec 2010.

  It would be a great start to save the file whose access is denied when the backup fails.  then we can proceed.

  Hi MickyLee3

   

  You can check if the problem occurs in a clean boot state. You can check if no service interferes with the backup. To perform the clean boot follow step 1 mentioned in the article below, and then try again check in the clean boot state -

  http://support.Microsoft.com/kb/929135

  If the problem is resolved check which service non-Microsoft is the source of the problem; referring to article and following the other steps.

   When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  a. Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  b. on the general tab, click the Normal startup option and then click OK.

  c. When you are prompted to restart the computer, click on restart.

  I hope this helps.

• iDRAC 7 launch Virtual Console fails with access denied error

  Hello

  whenever I try to launch the idrac video console 7, it fails with an "Access denied" error it's weird because I'm connected to the idrac as superuser. I use JDK 1.6. I tried through different browsers and I still get the same error.

  Found the same problem after an update of the Firmware to iDRAC.

  To address I created a new user account and permissions of base. Seems "Access Virtual Console" even when checked permissions do not actually post update.

• simple xcopy of a file fails with "Access denied" on Windows 7 Professional

  script simple cmd:

  CD folder

  Echo hello > hi.txt

  xcopy/c/y/o/k/r/q hi.txt there.txt

  There.txt Specifies a file name
  or the name of the directory on the target
  (F = file, R = Directory)? f
  Access denied
  0 file (s) copied

  I'm admin on the box.  Cacls %TEMP% shows:

  C:\Users\rwalker\AppData\Local\Temp NT AUTHORITY\SYSTEM: (OI) (CI) F
  F BUILTIN\Administrators: (OI) (CI)
  fetter\rwalker: (OI) (CI) F

  did you start the prompt cmd with admin rights? With UAC you have standard user rights, until you ask for surgery administrator rights. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• When you run the backup, I get access denied error code 0x80070005.

  If I do not know what file it is for how I spend it?

  And also tell us exactly how you try to back up and where you try to save up to.

  See you soon.

• Windows Server 2012 R2, synchronization of offline files and Folder Redirection GPO. The synchronization failed. Access denied.

  I need a solution for the problem below.  I have seen that other people have experienced the same problem but I couldn't find a solution.

  I've set up a GPO that synchronizes user files to a network, for example, the My Documents folder location.  The client machine is running W7 Pro x 64.  Assume that the primary user of the machine is user1.

  Sync Center displays an error.  The error reads 'Documents. (\\Server\Profiles$\User2).  Access is denied. »

  Obviously, the problem here is that despite being connected as long as User1 tries to synchronize the user folders to other profiles on the computer the folder redirection, whether they are connected or not.

  We never seen this before and if so has anyone ever managed to find a solution to this problem on a shared machine?

  
  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• backup of Windows Vista failed due to access denied 0x80070005

  I'm try to use a WD Passport essential 320 drive (8 months) as support for my daughter Gateway laptop (about 4 years old; 2 GHZ RAM, 150GB hard drive, 100 GB of free, USB ports are 1.0 only, sigh!).    Instead of using WD Smartware, try to use the backup utility Windows Vista (Basic, 32-bit).    I followed instructions from WD on this exactly, but every time I try the backup, which takes more than half an hour in what appears to be a valid backup operation, the backup stops abruptly with an error message indicating that the backup failed.  Error message States only: 0x80070005 - access is denied.  As far as I can tell, I attributed to full sharing for the drive and the drive itself shows as a separate with no partitioning drive.   Technical support (level 1) WD told me that they think that the drive itself is correct, that the problem is with Windows and that they could not help me with Windows problems.   Themselves to level 2 has said pretty much the same thing but offered through the messages of support from MS, but neither he nor I saw patches associated with Vista, only the XP machines.  What is the benchmark for my Vista operating system?   Thank you!

  I have the same problem.  I have a WD external hard drive, I had the habit of saving on all the time with no problems.  January 2011, I have not had a successful backup and rather get moved out of the backup mid-term with error 0x80070005 access denied.  Have you ever found a solution?  I tried to turn off UAC, security, firewall, backup in safe mode, but nothing works.

• backup failure "access denied 0x80070005.

  I meet a backup failure error ' access denied 0 x 8007005 "whenever I try to save my computer.  I use Vista Home Premium.  Suggestions for solution on how to fix this problem

  Make sure that you are logged on as administrator.

  Don't forget to check the antivirus product issues and security as a 3rd party firewall (Comodo, on the one hand, a
  has been known to cause this problem.

  It is a very difficult to solve.

  Products of security/antivirus/antispyware are a known cause, so you can turn them off like
  as the test (and that sometimes not really totally removes their influence).

  How to restore the security settings the default settings?
  http://support.Microsoft.com/kb/313222

  It is usually a permissions problem:

  Please check this link and those that he sites.

  Work your way through my 3 posts here.
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/200f5140-c2dd-48a5-8CDB-0d8c82ade3cf

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• I receive error Code: 0 x 80070005 (access denied) for the KB2698365 & KB2719985 updates

  The environment is Windows XP SP3

  -Windows Update fails for these 2 updates

  -Fixit research and 'fixed' a problem to update storage location.

  -Windows Update still does not work

  -Download the update on Microsoft.com

  -Manual installation fails with 'Access denied' during installation.

  Runnng Bit Defender but it too fails when you try to automatically install these 2 updates.

  Yes, I am the administrator and the only user on the machine.

  Thoughts?  Help?

  THX!

  Hello

  1. what ran fixit?

  2. what version of Windows XP are you using (whether x32bit or x64bit)?

  3. you have made no changes to the computer before the broadcast took place?

  Follow the steps:

  Method 1:

   

  Follow the article:

  http://support.Microsoft.com/kb/968003

  Method 2: To run only the fixit for Windows update reset component

  http://support.Microsoft.com/kb/KB971058

  Restart the computer and the monitor upgrade of windows, if you get the same error then perform method 3.

  Method 3:  Run the Windows update agent and check.

  http://support.Microsoft.com/kb/943144

  a. click on the link above and download the appropriate version of Windows Agent and run it.

  b. restart the computer and control it upgrade of Windows.

  c. If the problem remains same run the run the Register the Wups2.dll file attach it in the above link and check for the issue.

  Registry warning:

  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the link below to follow the steps to back up registry:

  http://support.Microsoft.com/kb/322756

  Hope the above information is helpful.

• Access denied (0x80070005) when you perform the backup on a DVD

  Have backed up on DVD as the computer was new, now get this error message and always backups fail.

  Hello HDHowell,

  Thanks for the return of the response.  I have included a link below where another user had posted the same error during a backup.  Please let us know status.

  Microsoft Answers:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/back-up-failed-access-denied-0x80070005/4413a008-5286-4050-BB32-0c5f7b3863fb

  Thank you

• WHS client backup fails with an access denied error

  I have a new laptop with Windows 8.1 on which I have installed the Windows Home Server 2011 connector and configuration backups for her. Backups fail at every attempt to return that an error prevented backup to create a snapshot of the volumes on this computer.

  The event log shows event ID 8194 by the following:

  The volume shadow copy Service error: error unexpected mark of the IVssWriterCallback interface. HR = 0 x 80070005 access is denied.

  . This is often caused by incorrect security settings in the process of the writer or the applicant.

  I tried to start the VSS service and tried the backup with the same result.

  The service runs with the same parameters the service runs on a computer that registers with success.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Windows 7 backup could not write to disc error 0 x 80070005 network "access denied."

  I spent the last hour looking at the Knowledge Base. There just aren't clear answers, so let's try again.

  I am running Window 7 profressionelle.

  I'm doing a return upwards using the backup of Windows 7.

  Backup target is a network (Western Digital MyBookLive) drive

  I can connect to the drive mapping (z) or by using the path network (\\MyBookLive\Backup)

  Using the Explorer, I have AUTHORIZED AND CAN create, delete, and copy files. I can also create or delete directories.

  Using Windows 7 backup, I add the network drive when you are prompted, as well as the user name and password. No error on this point.

  When I run the backup, a number of xxx movies. TMP files are written to the network drive. So, the app has permission to create files.

  However, I get an "Access denied" error with an error code 0 x 80070005

  ________________________________________________________________

  Solutions 1

  "I tried a solution of the evolution of the network security: LAN Manager authentication level."

  "Send LM and NTLM & - use NTLMv2 session security if negotiated".

  It did not work.

  Solution 2

  I use Avast antivirus. I have it turned off. It did not work.

  Solution 3

  Turned off the Windows Firewall. It did not work.

  Help, please.

  Hi phwayne,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/error-code-0x80070005-backup-not-completing/989958f9-E05B-4a1a-A2A1-1c3a3347a7c3

  It seems you have tried some of the troubleshooting list, but others you can try.

  I hope this helps!

• TB update fails and I get an error of access denied to 7 - Zip when you download a new version.

  Thunderbird was not able to update from version 24.6.0 (under Windows 7). Whenever I try to auto update, it tells me that the update fails. When I let the updater download a full version, which also fails. When I try to download a new version manually, during the extraction process, I get an error message indicating "7-Zip" up and "Access denied" in the window. I followed all the suggestions to the support download error page (as an administrator, stop the process of Thunderbird, etc.), and none of them solved the problem. Any other ideas?

  What firewall / anti-virus software you are using. My guess is that the firewall or the anti virus software blocks both the update and full installation because it contains ZIP files. I have not heard that outside the paranoid company / parameters of business in the past, but there's always a first time.