Simulator of OS6 for VS. Debug?

Similar Questions

• What is the best tool for remote debugging

  What is the best tool for remote debugging

  I don't know about the 'best', but I find using the Google Chrome WebInspector works very well for this.

• browserfielddemo shows a white screen on Simulator 9800/OS6.0.0.284

  Hello

  I imported browserfielddemo of OS 6 samples shipped with eclipse plugin 1.1.

  I downloaded a simulator 9800/OS6.0.0.284 flame.

  When I ran the browserfielddemo, I got a blank white screen.

  Could someone help? Thank you very much.

  Kind regards

  William

  I found the reason. The URL is not the connection as string '; deviceside = true '.

  Also, if there is a web page redirect, the connection string should be added to the url redirected as well.

• What is good JDev/SQLDev Setup for development/debugging extensions

  What are appropriate measures for JDeveloper to facility for developing/debugging Sql Developer extensions? Refer to a link from doc, if any.

  What specific combinations of Jdeveloper and Sql 4 developer + are supported?

  The combination that I use (see below) generates serious errors of 200 + during the definition of the 'target platform' of a new project of extension to my installation Sql Dev 4 +.

  1 the JDev and extension versions I use do support the version of Sql Developer as a target "platform in JDeveloper for building/test/debugging extensions?

  2. If it is not then "what specific combinations of JDev and Sql Dev are supported?

  3. If so, then maybe there's a bug in JDev or Sql Dev about the compliance OSGi or version reports.

  Already posted this in the Sql Developer forum.

  https://community.Oracle.com/thread/3544323

  Received a response from the Sql Dev PM but he did not address the issues and the specific problem because I already do what was suggested it:

  1. re: what is good JDev/SqlDev Setup for development/debugging extensions?

  

  Jeff Smith SQLDev PM April 8, 2014 03:23 (in response to rp0428)

  <: section >

  Currently being moderated

  Development of Extensions for Oracle JDeveloper 12 c (12.1.2) - summary

  http://www.Oracle.com/ocom/groups/public/@OTN/documents/WEBCONTENT/131167.XML#Oracle.JDeveloper.esdk

  You'll want this SDK

  12.1.2.0.40.66.68

  Oracle.JDeveloper (min = 12.1.2.0.40.66.68 , max = 12.1.2.0.40.66.68 )

  The goal is to be able to set breakpoints and debug normal while the development and test of extensions for sql developer. Can I use JDeveloper to compile/deploy a jar extension can run sql developer and install it, but this isn't an effective way to create/test/debugging code.

  1. os - Windows XP SP3

  2 Sql Developer 32 bit - Version 4.0.0.13

  Build a HAND - 13.80

  3 JDeveloper 32 bit - Build JDEVADF_12.1.2.0.0_GENERIC_130608.2330.6668

  ((4 JDeveloper downloaded installed using: a) jdev_suite_121200_win32.exe, b).

  esdk_bundle_12.1.2.0.40.66.68.zip

  5 has created a new extension project

  6 tried to affect 'Platform target' sql developer
  a. - manage - the-platform target project properties add sql developer

  More than 200 serious mistakes (see the other thread for samples):

  a. the major part have been associated to ' orai18n - collation.jar'

  b. a half - doze or so "system property jdbc.library.

  3. a "system property xdb.library.

  4. two to "Unable to parse clear jar of extension.

  I would expect JDeveloper to check the "target platform' for OSGi compatibility and version before trying to import it as a"target platform.

  Same bug exists when you use the last Sql Developer version 4.0.1.14.48 as the target platform.

  Jeff Smith, Sql Dev PM, responded in this way in the thread I posted in this forum:

  And a bigger problem is that you use JDev12.1.2? B/c SQL Dev 4 is built on the top of 12.1.3

  12.1.3 JDeveloper has NOT been made public that I can find.

  Q - JDeveloper 12.1.2 does support using Sql Developer as a target "platform for an extension on 32-bit Windows project?

  ----------------

  -Updated 19:43 by rp0428

  ----------------

  John McGinnis has been authorized to provide the definitive answer from the point of view Sql Developer Team in this forum:

  JDeveloper provides a design environment for the creation of new extensions. However, this environment designtime is created by and maintained by the team of JDeveloper. SQL Developer team has limited entry in there and we don't have any control over the target "SQL Developer" it provides. Unfortunately, JDeveloper 12.1.2 is the latest version of JDeveloper which is offered to the customers, and there are several significant changes to the configuration of products between 12.1.2 and 12.1.3 which affect the extensions. There is no version of the developer SQL which was delivered using JDeveloper 12.1.2 then the target of "SQL Developer" for extensions in JDeveloper 12.1.2 doesn't really work for the creation of significant extensions.

  Just a heads up to the JDeveloper team who can run through this thread.

  As part of the public release of JDeveloper 12.1.3 I hope there will be some sort of statement of support using Sql Developer as a target "platform for developing extensions.

  I will definitely test this version when it is released and will transfer at this time, if there are problems.

  I'm marking this question ANSWER because since then, based on the response of Johns, I'm not sure that any other 'official' answer can be given for the moment.

  But the comments or additions would be more than welcome.

• InDesign CC 2015 will not load the plugin, claims its for the debug version

  Hi, so: I am compiling a plugin for InDesign CC 2015.1 x 64, and during the launch of the ID, he says its for a debug version.

  Only this isn't. I checked three times and sound using the Release configuration (I have never built a before debugging version); her affair against bookstores of liberation in the configuration pages.

  What is exactly what that search the ID that indicates a plugin like 'debug '?

  Although you checked, but still I would like to apply the points that you need to check to identify the problem

  1. Check again that only free Indesign libraries are linked in, a way to check this is to just rename the folder where the debug version of lib and then compile it. We would immediately have a binding error.
  2. Check that the indicator of correct preprocessor is sent to the command ODFRC line that is there is no d DEBUG to the command ODFRC line
  3. Check again that NDEBUG is sent as preprocessor flag to the compiler as well.

  I suppose that one of these gossipyshe points doesn't solve your problem, if it does not then post back. We will think of other causes to this problem

  Thank you

  Manan

• How to install the 9000 Simulator in JDE for Eclipse?

  The JDE for Eclipse 1.1 (gold) is not delivered with the 9000 Simulator.

  A reported problem display on a 9000 device so I would like to test the application in this Simulator specific.

  If I use the eclipse Update site and choose a pack of different components (e.g. 4.7.0) and select next, I get an error:

  Cannot complete the install because one or more required items could not be found.
  
  Software being installed:
  BlackBerry Component Pack 4.7.0 4.7.0.46 (net.rim.eide.feature.componentpack4.7.0.feature.group 4.7.0.46)  
  
  Missing requirement:
  BlackBerry JDE Plug-in for Eclipse 1.0.0.67 (net.rim.eide 1.0.0.67) requires 'bundle org.eclipse.jdt.core [3.4.0,3.5.0)' but it could not be found  
  
  Cannot satisfy dependency:
  From: BlackBerry JDE Component Package 4.7.0 4.7.0.46 (net.rim.eide.componentpack4.7.0 4.7.0.46)
  To: bundle net.rim.eide 0.0.0  
  
  Cannot satisfy dependency:
  From: BlackBerry Component Pack 4.7.0 4.7.0.46 (net.rim.eide.feature.componentpack4.7.0.feature.group 4.7.0.46)
  To: net.rim.eide.componentpack4.7.0 [4.7.0.46]
  

  He wants than the JDE for Eclipse version.  Do I have to maintain a separate installation (and therefore separate the project) to 4.7.0 component pack support?

  I found BlackBerry_Simulators_5.0.0.411_9000.exe available for download, but how do I install it is usable in eclipse?  Can I just install it in the right folder, and that everything will work magically? (after working on what the right folder is ofc).

  Or is it simply not possible and I should just run the simulator of 9000 outside any debugger?

  I have not tried. But if you run the Simulator with your application and you have open Eclipse. Trying to debug on this race sumulator: click on the drop down menu on the little green play button and choose "run as" and choose the Simulator running.

• Simulator of OS6 and torch

  When I try to run the torch on OS5 or OS6 Simulator, he breaks with a null pointer exception. None of my code is executed.  Attached to peak.  (Eclipse)

  What is not seen in the photo is the popup indicating the composite number waiting for me to click "reply".

  The package is Simpackage - 6.0.0.141 - 9800

  Same thing happens when I try the same thing using OS5 and torch so it appears likely that the problem is in the Simulator. I use simulators in 4.5, 4.6, 4.7 and 5.0 without any problem

  Just checked, arrives on the BB JDE also (another pic)

  I have it.  I was able to reproduce it.  The trick is to press the entry instead of the Green send key.

  This will be fixed in a next version of simulator of smartphone BlackBerry.

  You can work around it for now by pressing the Green send instead of enter key.

• Built for the Debug Version of BB

  There is a blog that WebWork apps which are subject to review for the purposes of certification 'built for BB' to present a debug build.

  We know why WebWorks must do this and this applies to AIR apps?

  It would be easier because you can export release with the telemetry data enabled versions, but we are still looking into how to test AIR applications for performance. Currently, it is very manual. The community will be given notice when / if we decide to go this route.

• Have we not get a key coded for each debug version?

  I sent away for signature 3 code keys and I have received and install for my JDE. Now, little time, I expect to be examples of debugging

  requiring code signing.

  Now, these examples will require running on real hardware and therefore require, make me send each build off to EDGE to receive a key before I

  It can debug by running it on the phone itself. Usually in debug cycle, there will be hundreds of changes and debugging of these changes.

  Does this mean that I have to get a new key code on each generation? even if I am in debug mode yet and do not ship to

  These versions?

  Is there an easier way to do this? How long does take to get a key code? In general, I would like to do it 100 times a day when debugging the code.

  Demand for key code returned by e-mail a few minutes or days? If the days, this means that a day of debugging takes 100 days now. What do we do to move that if this is the case?

  Please inform me.

  Thank you

  -Donald

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=8106&query.ID=169...

• Connection to iOS Simulator by Air for iOS parameters

  Hello

  I tried to connect a Flash AS3 document, intended for the iPhone/iPad, iOS Simulator.

  The main reason to test this way is that because of the pixel dimensions doesnot app on the computer screen.

  In the air for the parameters of the iOS, I traveled to the iiPhone Simulator.app

  After you set the path in this way, I went to the control > test movie > iOS Simulator

  The result was this error message:

  ID: framework not found UIKit

  What I am doing wrong?

  Any help is greatly appreciated.

  Try this info:

  http://helpx.Adobe.com/Flash/using/packaging-applications-air-iOS.html#main-pars_header_1

• Extremely strange: Ipa works for the 'debugging device' but breaks down for the "deployment."

  Hello
  In both types of investment promotion, the application starts well, but if the app is respected for the deployment, it hangs at this point where the data is downloaded and written in a database. In debug mode, the app works very well every time and never shows an error. I'm completely stumped. Thank you. I really need your help.

  Hi Luke,.

  Can you please share your project with me? It would be useful in the investigation of the issue. You can attach your project here or send it to me akharban (at) adobe (dot) com.

• No fix for ripple debug gel?

  Hey all,.

  Whenever I put a breakpoint in the "Inspector" ripple, ripple crashes when you try to enter debug mode. I'm at a point where I can't keep jamming alerts everywhere, I need a reliable debugger. Anyone know how to get around this bug?

  I can debug very well using the extension of Chrome, but since I can't get cross-domain scripting to work through the Chrome extension I'm stuck with the installable version buggy.

  Getting desperate here, anyone know a fix? Is it possible to download a daily version of the installable version?

  Thank you

  Hi radioblaster

  It's funny you ask that question today, because if check you Ripple roadmap, you'll notice it's going to be a ripple refresh every day now. Debugging points are a known problem and you will notice that the Refresh should fix.

• Replacement list for the debugging tree model

  After you run a problem with the model tree (with run time) list appears not all models included, I reworked a section of the file debug classic.cfm. I thought I would share what I did so that others can benefit from.
  
  ColdFusion debugger model tree list replacement
  
  If you find it useful, please let me know :)

  After you run a problem with the model tree (with run time) list appears not all models included, I reworked a section of the file debug classic.cfm. I thought I would share what I did so that others can benefit from.

  ColdFusion debugger model tree list replacement

  If you find it useful, please let me know :)

• WebWorks SDK for Tablet OS - last OS Version 1.0.1.1692 Simulator?

  I need confirmation from someone that I do run the latest Version of Simulator Tablet OS (for WebWorks). Running: 1.0.1.1692.

  

  I use the latest SDK WebWorks for Tablet OS (2.1.0, released June 23, 2011).

  Please confirm or deny. Thank you.

  The most recent and PlayBook Simulator will be included in the SDK WebWorks for Tablet OS v2.2 will be released early this week.

• Build for the success of peripheral liberation but build for debugging device failed

  Hi, I have created new project with the new SDK of my previous old SDK which is already can build release and debug of the device device.

  I'm just copying the file in the src folder and active and made the minor change due change of myApp.cpp to applicationui.cpp

  (I'm doing this because when create export release build, the size of .bar .bar file is big - I'm already the clean)

  When I build this device release is success but for device debugging failed.

  The error is:

  make: * [Device-Debug] error 2

  make [1]: * [debug] error 2

  make [2]: * [o.le - v7-g/myApp] error 1

  How to solve this problem?

  Something I forgot? or things usually cause this?

  Thank you

  Ah I found the solution.

  Must add the .pro file:

  LIBS +=-lbb

  Maybe on the old SDK don't project any need to add this, but the new SDK project may need this (I don't know). But after that I added this on my .pro, the success of my project build on the device debugging.

  Thank you