Simultaneous operation of several SubVIs

Similar Questions

• simultaneous operations of view composer max can be changed to number

  Say I want to change the operation of composer max view simultaneous as 100, it would be possible as long as I have the resources to manage all these simultaneous operations? Would break the composer?

  kappyninewood -

  Please see my writing here on this topic:

  Provisioning operations (simultaneous)

  VMware recommends you set this to 20 or higher, not to exceed 50. VMware engineering have conducted tests up to 50, however, the clients must experiment and do additional tests of 20 upwards.

  Power on (simultaneous) operations

  VMware recommends this set to 32 or higher, not to exceed 50.  VMware engineering have conducted tests up to 50, however, the clients must experiment and do some additional tests of 32 upward.

  Guard/Note layout: If vCenter Server's resources, increases in simultaneous deployment operations could potential impose constraints and have opposite results increased, but decreased provisioning time. Additional testing is noticed and should be conducted.

  VMware View environments are structured to scale, therefore, load thresholds Sever and vCenter server connection view should be monitored and refined for better performance.

  Let us know if that helps.

• Extraction of simultaneous signals of several channels in OPD 7104

  I'm trying to go for the same signal on two tracks to see if there is a time difference between two channels of the scope, using the driver function OR:

  "lu tkdpo7k (several waveforms) .vi." However this VI seems to seek channels of waveforms fomr sequentially rather than simultaneously, resulting in a time delayed version of the same signal on a channel with respect to it.

  I was wondering if there may be e another function to acquire the signals on two channels at the same time tried to use two instances of ' tkdpo7k Read (unique waveform) .vi ", in Labview, but still, they do not lead at the same time.

  Help someone?

  Thank you

  Yes, I use the example vi (tkdpo7k\tkdpo7k.llb\tkdpo7k acquire several Example.vi waveform) of tkdpo7k.llb driver downloaded from OR webiste, which calls for "(acquérir deles de signaux multiples)."

• Of several Subvi in front

  Hello and welcome (this is my first post here).

  Sorry if this question was already resurrected, however I do not know how to specify exactly in terms of nomenclature of LV (I'm a beginner in LV) which makes it quite difficult to search forum.

  I need to create an interface with the user specified number of input channels (specified during application, dynamic loading is necessary). Each channel must be controlled by Subvi. I would like to load panels of any entry Subvi course into a container in a main façade (Similarly for the secondary, but multiple loading VI, not alone). Is there a container capable of this? Is this possible in LV?

  Kind regards

  kaolpr

  You can use several sub-panels. Unfortunately, the number of sub-panels must be defined during the development. You can create a method to browse through your different channels. This assumes the loading and unloading of the multiple sub-panels you include in the user interface.

  Another alternative would be to use a table or something similar. You have your subVIs post updates of the code of the user interface through the queues, registrants or user events. The tables are much easier to manage when your number of items varies. If you need to have the user interface to pass information to the subVIs it can also use queues, registrants or user events.

• How to call only the operations of several connectors of ICF through simple connector server

  Hi Experts,

  I developed two connectors of the ICF (ICF1 and ICF2) and placed the beams of connector on the same server connector.

  Please guide me how to get only the authorities of each of the connector to call operations of each separately.

  I use following code-

  List of < ConnectorInfo > this.getConnectorInfoManager = cInfos () .getConnectorInfos ();

  System.out.println (cInfos.Size ());

  for {(ConnectorInfo cInfo:cInfos)

  APIConfiguration apiConfiguration = cInfo.createDefaultAPIConfiguration ();

  setPoolConfigurations (apiConfiguration);

  Discoveryendpointspecifie configProps = apiConfiguration.getConfigurationProperties ();

  this.setUpConfigurationProperties (configProps);

  ConnectorFacadeFactory facadeFactory = ConnectorFacadeFactory.getInstance ();

  ConnectorFacade connectorFacade = (apiConfiguration) facadeFactory.newInstance;

  connectorFacade.test ();

  }

  Methods of all connectors are called here to test and how do I selectively invoke test() selective connectors?

  Hello

  The connector of the ICF is called by these configurations in the 'Lookup.CONNECTOR_NAME. Research of configuration. The search name is configured in the COMPUTER resource

  We have the following values configured in the search based on who the connector class fires is

  Name of the connector	org.identityconnectors.CONNECTOR_NAME. Connector	Main connector class identity. It is the class that implements the SPI of the ICF framework operations.
  Name of the bundle	org.identityconnectors.CONNECTOR_NAME	Name of the identity connector bundle
  In Version	11.1.1.5.x	Version connector identity

• AND operation across several lines

  Hello, OTN,.
  
  Is it possible to have the operation on multiple lines? I'm of the Transaction Table that has the columns EVENT_NAME and USER_KEY. I'm trying to count the number of users who made two specific events.
  
  Count for example (user_key separate) if the user_key is associated with two node namely EVENT_NAME = 'START' and EVENT_NAME = "PAUSE"
  
  I can do with a set operation (see below), but I'm interested to know if there is not better way without using multiple subqueries.
  
  
  SELECT count (distinct T1.user_key) of
  (
  Select distinct user_key of the table where EVENT_NAME = 'START '.
  INTERSECT
  Select distinct user_key of the table where EVENT_NAME = "PAUSE".
  )
  T1
  
  Thank you very much
  Joe

  Or maybe if you need BOTH:

  SELECT COUNT (DISTINCT t1.user_key)
    FROM (SELECT user_key
               , SUM (DECODE (event_name, 'START', 1, 0)) num_starts
               , SUM (DECODE (event_name, 'PAUSE', 1, 0)) num_pause
            FROM mytable) t1
   WHERE num_starts > 0
     AND num_pause > 0
  /
  

• Self-billing simultaneous operation of very slow program

  Hello
  
  EBS 11i
  
  Help please...
  Our 2 users run programs simultaneous self-billing and he made our 4 processors (quad core) Server spike at all 100%
  We just bounced back the Oracle Apps but it get very slow. Is it possible to set the program auto-facture?
  This problem has not happened before only lately: (.) Is this because our data grows big?
  
  
  Thank you very much
  
  Mrs. Mina

  I tried the cmclean in, it seems useful.

  Do improve performance?

  How do cmclean periodically as a simultaneous to be programmed at 01:00 every day program?

  You can schedule this script from the OS to run before the time you decided to submit simultaneous program. However, according to me, that is not a realistic solution, please consider stopping and bringing some CM upwards each time that you must run the cmclean.sql script.

  Is there a cmclean as a simultaneous program? Did you making your own?

  Non - Use cron.

  Thank you
  Hussein

• How to use as operator for several values

  Hi all
  
  I want to obtain the column values for the column - filed_name which ends by ('X 1', 'X 2' 'X 3' 'X 4' 'X 5' 'X 0' 'XA' 'XB' "XM" "XP" 'X' "CM" "MT") of the variable_info table
  
  
  I tried to use as shown below
  
  SELECT * FROM VARIABLE_INFO WHERE FieldName like (' %x 1 "," %X 0 ");
  
  but getting error
  ORA-00907: lack of right parenthesis
  
  can someone tell me how to use as operator for multiple values?
  
  Thank you/kumar

  You need not a subquery, just make sure that you use parentheses to group your GOLD requirements

  SELECT RELATION ,
  FIELD_NAME ,
  ATTRIBUTE ,
  FIELD_DESCRIPTION,
  SOURCE
  FROM VARIABLE_INFO
  WHERE RELATION NOT IN ( 'CHAI',  'ITAB', 'ITB2', 'ITB3', 'MINI', 'NOTE', 'MINC', 'FINI', 'FTIM', 'FWTG', 'FMLY', 'FMIS', 'FSUM', 'MEMB' ,'FINC', 'FASO')
  AND (SUBSTR(FIELD_NAME,-2) in ('X1', 'X2' ,'X3', 'X4', 'X5', 'X0', 'XA', 'XB', 'XM' ,'XP' ,'CM','MT')
    OR substr(FIELD_NAME,-1) in ('X')
    OR substr(FIELD_NAME,1) in ('J')
    )
  AND (ATTRIBUTE LIKE 'NUM%' OR ATTRIBUTE = '-') ;
  

  The error you are getting sounds like a problem with the definition of VARIABLE_INFO. It seems the synonym or something that it points to rear edge

  For example:

  CREATE SYNONYM X FOR DUAL;
  CREATE SYNONYM Y FOR X;
  CREATE OR REPLACE SYNONYM X FOR Y;
  SELECT * FROM Y;
  
  SQL Error: ORA-01775: looping chain of synonyms
  

  Kind regards
  Bob

• HP Photosmart 6515 Scan-Advanced_Settings checkbox is not operational for several PDF pages

  HP Photosmart 6515, Windows Vista 32-bit Home Edition,

  HP Photosmart program cannot scan multiple pages in a .pdf file, because the disabled in advanced settings check box does not allow multiple pages to analyze;  not "add files +" button/icon never appears as it does SI Documents-To-E-Mail is selected. ".  It at least shows me the missing button, which never appears in the selection of the PDF Documents.  Box of documents-To-PDF is DOA.

  So I ran the HP Photosmart update under all the programs/HP/update, and it updated and still does not work.  Update says now "up to date".

  -Yes, I tried to Scan-To-Computer, since the touchscreen HP 6515, and he asks me it indeed if I want to scanb another page.  However, it is fast to the time-out that I can't get another page on the glass or even open the cover completely before it goes... after pressing 'Yes' (I want another), "Scan" appears just long enough to tease and taunt me by saying "Ha ha", like Lucy with the football Charlie Brown.  No parameter to control the duration of the waiting period?

  Hello

  Multi-page analysis only supported on 300 DPI or more low-resolution.

  Go to the HP software and select scan a Document or Photo.

  Select the PDF option and ensure that the preview screen is displayed.

  Reduce the resolution to 300 DPI or below and click Scan. then the pages option Add should appear.

  Kind regards

  Shlomi

• How to set up LAN wireless and wired for simultaneous operation

  I use a Lenovo thinkpad running windows XP. I want to set up an independent network so that I can connect my hardware for debugging. At the same time, I want to be able to access the corporate network using the wireless interface.  My autonomous network consists of a Belkin router that is to act as a DHCP server, my laptop connected to a port on the router and my test material connected to a different port on the router. My wireless interface is configured to connect to the corporate network. With wireless interface and the ethernet interface (wired) enabled, when I am doing a config ip, I see that the devices get valid IP address, corresponding to subnets, they connect to IE the ethernet port gets IP address 192.168.x.x 172.x.x.x IP poster wireless interface while. But I am not able to ping or access sites on the internet, I am able to ping the router Belkin on the independent network.

  However, if I go under network connections and disable the ethernet connection to the local network can access the internet and my business network. Similarly, if I disable the wireless connection and that you enable the ethernet connection, so I am able to ping the router only and not my test equipment connected on the same subnet.

  If I configure the (wired) ethernet network interface to use a static IP address in the pool of IP from the router Belkiin (who is also a DHCP server) and set the IP Address of the Belkin router as gateway, I can access all the other devices on this local subnet if and only if the wireless interface is disabled.

  The search for networks order is defined as the wireless and Ethernet.

  In my case, I need two interfaces to be active at the same time, as explained at the beginning. Appreciate any suggestions.

  Thank you.

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

  Hope this information is useful.

• Simultaneous display of several tables in SD3

  Is there a way to 'see' more than one table at the same time in SQL Developer 3? Currently, if I have an open tab that displays the contents of a table and I double click on another table, I want to watch the previous farm table view and reopen a new. I am looking for a way to keep the two open points of view at the same time.
  
  This issue has been addressed in the forum before?
  
  Thank you!

  Hello, Yes, simply click on the icon to the left (red pine) to freeze the view.

• complete the recursive operation on Subvi after clone a VI

  Hello. I use Labview 8.5.

  I want to do a re-entrant execution on a VI (clone).  This VI has several Subvi. I would like to know if I have to place a check mark in the box of the reeentrant of each Subvi execution or if the option is performed automatically. In other words, my Vi several Subvi thus, this work is long if I have to do it manually.

  Thank you, Daniel.

  Ron Daniel wrote:
  Thank you. one last question, is it necessary to place a check mark in the box of the reeentrant of each Subvi execution so that the main VI works properly? Daniel

  N °

  Only those who are called to the re-cursively should be defined as re-entering.

  Ben

• How to create a single VI accepting several input type definitions?

  Dear users,

  How to simplify (or change) the following code for better overview and maintenance:

  

  The structure on the top is a code handle my cluster (uninteresting code is blocked). On the bottom, there are clusters of several type defs, which I use. So, I have created several subVIs to accept my pile of type defed (all together 4 pieces). I link all my subVIs in a single polymorphic VI and use as desired. In all of my subVIs, I change the elements of the cluster in the same order.

  But when you change the code of the subVIs, I need to change the code in the other subVIs, too. Is it possible to create a single VI who will accept multiple clusters of type defs?

  Thanks for listening!

  See you soon,.

  What I would do, is go back to your configuration polymorphic and transform any code which is common proximities different polymorphic cases in a Subvi.  Then just edit the subVIs.

• A VI record with it's subvis and hierarchy

  Hello community,

  I'm working on two independent version of the same application. The differences are minor, most of the source code is the same. Obviously a pain in the back to keep as if I find a problem with esityksen and fix it then I need to apply the same changes on versionB as well. Even if I want to add a new feature. Its particularly painful if the hotfix affects several subVIs as so I need to copy the new version to the other version. Its very subject as if I just forget to crush a VI then VersionB can't do what I want it to do.

  The question I have: is there a way to export sort a VI with all its subvis in keeping the structure of moose files, so I can simply copy this new structure and it would replace all of the old screws?

  (Before ask you... I inherited this accession and there is absolutely no way to merge the two versions in a single application. "It must stay as it is.)

  Let me know if you have a feasible idea.

  Thank you!

  While it sounds like it would be better to find a new way to manage these slightly different versions, I will answer your original question.

  If all your screws are in a project, you can click on file > save for the previous Version... And then choose the version that you want to save it to. You can, of course, select the same version of LabVIEW in the menu drop-down (I don't mean that you need to change the version each record!). Choose a new folder to save on and it will preserve your file structure.

  It could be a bit annoying because it copies the entire hierarchy. So if you have a folder called MyProject with subfolders, but MyProject lies in Libraries\Documents\LabVIEW Projects\2014\MyProject, then you have to dig several records to join your screws

• Open a Subvi inside the main façade, not to burst

  Hello

  I am writing a program that contains several subvis. The option I have in the configuration of the node of the Subvi is to open the front panel, during the call. What I want to do is to open the front panel of the Subvi inside the main façade.

  For example, it is main and subvi1 and subvi2. In the main FP, there are Boolean start button. When he pressed it opens Subvi FP for the user to enter parameters, but this Subvi should be opened in the main PS and when the user presses the fact. It refers to the main FP.

  I tried searching online and inside on labview but I couldn't find anything. Also, I'm a newbie to labview, so I don't have a lot of experience.

  Thank you

  ERFAN

  Secondary use