complete the recursive operation on Subvi after clone a VI

Similar Questions

• Don't throw Illustrator CC 2014 (could not complete the requested operation) even after the new installation (3 times), someone knows how to solve? (Windows 8.1)

  Hi guys, my CC 2014 Illustrator won't launch, receive an error message 'Could not complete the requested operation', this isn't a problem of specific files, I can't launch independent Illustrator.  I have uninstalled and reinstalled 3 times and contacted support, but they were not able to solve at the moment.  This is a relatively new 8.1 windows installation and none of the custom fonts have been added.  I tried to delete the preferences and launch files and which had no effect.  No idea what I can do, any help would be greatly appreciated.

  Edit: Forgot to mention that I also tried running Illustrator as an administrator and that Illustrator worked perfectly on this computer from the installation (about 2 weeks) before this started happening.

  Thank you

  Chris

  

  baglosh,

  You reinstall using the way complete three steps (the otherwise strange things may persist)?

  (Check the box to delete the preferences), run the clean uninstall and reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

• BitLocker: Could not complete the requested operation because of...

  Two days ago Windows 10 was running on my laptop. BitLocker has been on two disks (D and E). For some reason, I have formated Win 10 and do a new install of Windows 7 Ultimate. After installation, when I unlock the drive D, it works very well. But I can't unlock the E drive. When I enter the password, the message "Could not complete the requested operation due to a catastrophic media failure or corruption of data on the disk structure."
  I'm sure that the password is correct at 100%, but I do not have any file recovery. Can someone help me?

  Hi NooriSAN,

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem, you cannot unlock a drive locked by Bitlocker key and get error message: "Could not complete the requested operation due to a catastrophic media failure or corruption of data on the disk structure."

  This could be if defective media stored on database security, or a program in the security software error has caused corruption on disk.

  For reference I suggest you to return the items mentioned below.

  In Windows 7 BitLocker Drive Encryption: frequently asked Questions

  Overview of BitLocker Drive encryption

  What are the main issues for Bitlocker?

  Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.

  Kind regards

• Problem in Adobe Illustrator CS6: could not open the illustration. Cannot complete the requested operation.

  Problem in Adobe Illustrator CS6: could not open the illustration. Cannot complete the requested operation.

  I was working on my .ai file and pasted a picture of PowerPoint to the adobe illustrator file. Then, AI crashed graphics colorful/patterns/images in my .ai file become black and white, and then I closed the file and may never reopen. I have tried a few apps demo available online recovery (as: service to restore file corrupted Illustrator for anyone ) but they do not work so far... What should I do? Thank you in advance!

  [Ask in the correct forum allows... Left non-technical Forum Lounge for forum specific program... MOD]

  deppie,

  Because obviously, cannot you try to copy and paste the work of a new document, one other thing that is often attempted is first of all create a new document and the file > Place (PDF summary, if any, of the) a corrupt how much can be saved this way.

  Here are a few Web sites I hope more effective where you can see if it can save the actual file, and if possible, you can pay a subscription having,.

  http://www.recoverytoolbox.com/buy_illustrator.html

  the http://Markzware.com/Adobe-Software/Fix-Illustrator-file-Unknown-error-occurred-pdf2dtp-fi collection.

  http://www.Illustrator.fixtoolbox.com/

  I remember, the first is for the victory and the second is for Mac, while the third should be both.

  Here are some pages about yourself the wrong with it:

  http://daxxter.WordPress.com/2009/04/16/how-to-recover-a-corrupted-Illustrator-AI-file/

  http://helpx.Adobe.com/Illustrator/KB/troubleshoot-damaged-Illustrator-files.html

  http://kb2.Adobe.com/CPS/500/cpsid_50032.html

  http://kb2.Adobe.com/CPS/500/cpsid_50031.html

  http://helpx.Adobe.com/Illustrator/KB/enable-content-recovery-mode-Illustrator.html

• I loaded the new update for Firefox today and received a message from 'need to reboot to complete the installation'. However, even after restarting several times the update does not load and he always invites me to restart my computer.

  The update does not load, and I can't "remove" program to my computer and reload as the same (needs to restart to complete the installation) error message keeps appearing even after several reboots.

  Do a cleaning (re) install and delete the folder of the program Firefox (C:\Program Files\Mozilla Firefox\).

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

  Uninstall your current version of Firefox if possible.

  • Do not remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup

• vRA 6.2.3 new company creation group error - "cannot complete the requested operation: resource not found.»

  Hello

  I have tried to create a new group of companies in vRealize Automation 6.2.3 and received the following error:

  The requested operation cannot be completed: resource not found.

  I've attached a screenshot of the error.  All services on the device of vRA show such registered.

  I think that this is related to the duty reinstall my SQL IaaS database a few weeks back, but I'm not sure.

  Any help would be greatly appreciated,

  -Mark

  I finally got to the bottom of this.  It was because of the vRA IaaS server being unable to speak to the DTC resource on my SQL cluster due to these two components are in different domains.

  If you are interested, I have documented the solution here:

  http://virtualhobbit.com/2015/10/02/configuring-DTC-access-between-vrealize-automation-IAAS-and-Microsoft-SQL-Server/

  -Mark

• all the Manager are not open after clone r12.1

  Hi expert,

  I have clone of database on a new server from prod. database is in place, the application is in place for the backend. When demand de./adstrtall.sh all services are normally don't start no error/warning back. but when I check the Manager

  ps - ef | grep FNDLIBR

  He returned only 5 lines that show all the Manager are not started. and one thing more when I access the PC customer request the application is not open.

  Please suggest me what I can do to check any type of error.

  I check all the quick logfile clone basic data and application but not found any type of error.

  AutoConfig successfully completed level database and application.

  OS - rhel 5.7 (test server)

  EBS r12.1

  OS - rhel 5.3 (prod server)

  Thanks and greetings

  pritesh Rodriguez

  the question is sloved by the following steps.

  1. in my case, the firewall is turned on then I m unable to access ebs application in the browser. so turn off the firewall on the server.

  2. in the-> simultaneous set I check every manager and change the host name of the server test (instead of host name of server prod). After eating this all is implemented successfully and works very well...

  Thank you & best regards

  pritesh Rodriguez

• Windows 8.1 Help! I was not able to open Illustrator CC 2014 for more than 2 weeks, error: could not complete the requested operation.

  I've been chatting with technical support and made of multiple remote access connections and nothing has worked.

  Fixed. Clean install of Windows.

  Re-install everything.

• Cannot complete the update of iOS for my iPad, the "the activation server is temporarily unavailable" message keeps popping up? Suggestions as to how I could complete the activation?

  Suggestions as to how I could complete the activation of my iPad after iOS update?

  I tried for 2 days now to complete the update of iOS on my iPad. Everything was going fine until activation, as I tried to continue, the message "your iPad could not be activated because the activation server is temporarily unavailable" keeps popping up. If anyone has suggestions as to how I could complete the process?

  Thank you.

  I have the same problem with you. There is no suggestions now. It seems that the problem exists only on the IPad 2

• Permissions insufficient to complete the operation after a clean installation of Adobe Bridge in Win7 Pro

  Three installed days ago Adobe photography CC bundle, which includes Photoshop CC, CC LR and bridge. I've never had this software on my computer before. I am running Win7 Pro with all updates installed. I'm on a single computer, only user with administrative rights.

  I wanted to use the extended features of the bridge to reorganize my D about 30,000 files raw drive photo library. I moved a folder to a new location without any problem. Unfortunately, now I am more able to move, copy, rename, or delete files in Bridge after moving only one folder. I got the message that I had insufficient administrative rights to complete the operation. I have administrative rights. Why could I offers a folder but not others?

  I tried to rename, move files with Windows Explorer, but got the message: you need administrator rights to complete this operation. I clicked on the button continue and the operation is complete.

  I spent two days several hours the Webchat and nearly five hours on the phone with Adobe support technology. We found in the 'Hidden' administrator I can complete all the actions file/folder without problem. However, I can not yet perform the same operations in my original user account, and I repeat, with administrative rights! This has been verified to the DOS prompt.

  Adobe technology had me reset the permissions in the folder Adobe Advanced Security/owner of the tabs, but nothing helped. I can not yet use this expensive software due to problems of Windows permissions. Also note that the UAC is in its default settings. Windows warns far from reducing the lowest.

  I've scoured the Microsoft Windows website for answers and found no that relate to my situation/scenario.

  Help, please!

  The unknown account is referred to an account that you deleted from this machine. You must now seize the property of the D: drive, the new permissions recursively apply.

• Error loading operating system after shutting down the computer because of the high operating temperature

  I decided to re - install Windows XP Pro x 86 on my wife's computer. So I went into the BIOS to make sure that the CD/DVD drive has been configured to start first, and then I inserted the DVD and then restarted the computer.

  Now, the XP disc started normally. I installed XP to the point where I deleted all previous partitions and then created a new. Windows then displays the warning that the computer would not be able to boot up to what XP finished installing. I guess that's because start-up files have been deleted when I deleted all previous partitions during the installation.

  Right after I clicked on enter the warning message, the computer shuts down. No! So, I try to re-boot, in the hope of all simply continue with installing XP, but instead, the computer will display a message indicating that the computer has been stopped because of the high operating temperature. I then go ahead and get a message saying: "Error loading operating system."

  No matter what I do, I can't go any further. I can't get into BIOS or anything. If I try the F10 key (or whatever the keys are), I get a beep. It does not properly respond to my entries.

  I don't think that the high temperature operation destroyed all components. The computer stopped several times in the past. Furthermore, it would not be part of integrated security if Microsoft enabled the computer reach a destructive temperature before stopping. I think that the problem occurred during installation was interrupted just after that previous partitions have been deleted.

  BT, I don't know what to do now. Loooking for suggestions.

  Hi Diadem1981,

  You can follow this link completely & check if the problem persists.

  Error message "Error loading operating system" when you restart your computer during installation

  
  Reference: How to install or upgrade to Windows XP

  Hope the helps of information.

  Please post back and we do know.

• MS Paint build upwards: not enough memory or resources to complete the operation

  I call this iguana impressive in the painting and I wanted to color. I decided to go for a black and white look and configured settings and chose the black and white, to give me the white instead of color.
  I zoomed to 300% zoom, white selected as color 1 and the third from the right in the second row color 2. Then, I selected the Eraser tool and started colouring the white background on the iguana by using the right button of the mouse.
  I tried several times and each time after about 30-60 seconds MS paint show me this message:

  There is not enough memory or resources to complete the operation.
  Close some programs and try again.

  When this happened, I checked the task manager that I couldn't understand something like that was the case. Apparently, I was using only about 60% of my 2 GB of memory, mspaint.exe using somewhere between 9,000 - 14,000 K according to the Task Manager.

  I tried to open a new mspaint and redo the same thing as above designated: zoom 300%, black and white, Eraser, white as color 1, which other than 2 colors right click, paint using the eraser: after some time, same result.

  What is going on?

  I use an Eeebox EB1012 with 2 GB of RAM, double heart Intel Atom 330, Win7 (naturally)

  EDIT: If this is not clear enough: ms paint would not react after the above mentioned message was posted and I had to end the process using Task Manager.

  Hi DrenchedIguana,
   
  
  Let us try the following workaround and check if this helps us solve this problem.
   
  Method 1.
  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  Let us, make sure that all instances of MS Paint are closed before performing the following operations:
  1. click on start, run, type regedit, and click OK to start Registry Editor.
  2. navigate to this key
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Applets\Paint
  and remove the key from the paint.
  3. exit the registry editor and restart the computer.
  4. start the paint to see if your problem has been resolved.
   
  Method 2.
  If the problem persists then I recommend that you create a new user account and check if the problem exists. If the problem is resolved in the new user account, I advise you to fix the corrupted user profile.
  Difficulty of a corrupted user profile 
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Redirect to a different page after the delete operation in the shape of APEX

  Hello guys,.

  I have a problem with the redirection to another page after a deletion of form data. Here's the scenario. I have a parent page and a model page to change the contents of the data source. Delete the operation works quite well. but once it deletes and it is up to the parent page. I want that redirect to a completely different page. Is there a way that can be used here? I tested the process of branching, it redirects the page, however, it does not remove the record from the table in this case.

  I tested the process of branching, it redirects the page, however, it does not remove the record from the table in this case.

  It should work. Check the properties of the branch. 'Point' should be after treatment when you press the button Delete:

  

  I forgot to say about it:

  > but once it deletes it and it is up to the parent page

  Remove the dynamic action of dialog closed, or make it conditionally.

• vSAN upgrade from 5.5 to 6.0 - Timeout to complete the operation

  Hi all

  I've been running a 5.5 vSAN configuration identical to William Lam to the virtual Ghetto (a killer custom installation of Apple Mac Mini running VSAN | virtuallyGhetto) for some time and the only reason not to upgrade more far was because of wanting to maintain a configuration of 5.x Horizon view inherited who needs vCenter 5.5. I've now decided this should not dictate my whole environment then after a successful move to 6.0 on the hosts and VCSA, I thought I would upgrade to vSAN 6 to take advantage of the improvements it brings, not to mention to remove the nagging alerts on the vSAN update available.

  After running through the prerequisites this fact compensation involved in a number of vswp files inaccessible, vSAN reported a good state of health and so I started with the upgrade online, be sure to include - allow-reduced -redundancy I have a 3-node cluster.

  When running and after about 20 minutes of nail biting (by accepting the fact that his machines of laboratory accommodation only, their fate can be determined by the success of failure of the upgrade), I received the following in the TVR: -.

  : Deletion of this VSAN disk group failed

  : A general error occurred: could not evacuate data for disk uuid 52da00fa-c8f2-fdb8-924c-3007d480ac4d with error: timeout to complete the operation

  : Cannot delete the VSAN disk, leaving group.

  : Upgrade tool stopped due to the error, please address reported the problem and run the tool again to complete the upgrade

  Someone at - it guidance on how to approach the time-out, or he could escape that I would understand rather the root cause that blindly blow to remove all of the configuration and reboot.

  Thanks for your help!

  All the best

  
  Andrew

  Hi Duncan,.

  I managed to work around the problem in the end, in a weird way. I ended up changing the default vSAN FTT from 0 to 1 storage policy and reapplied to redistribute the data or the light evenly on the hosts as expected to the compliance of the report. After a few hours, I then changed the default vSAN strategy towards an FTT of 0 and again applied. By running the TVR command with the parameter - allow_reduced_redundancy again by the failed sequel, but a quick check on the vSAN has shown that the majority of data consumption was now on the hosts 2 and 3 with a tiny 3 GB of use reported against the disk of the host of the first group. At that time, I've been manually the disk group on host 1 (choose not to evacuate the small amount of data that has been left). After you re-create the disk on the host group, it automatically came back in as v2 and I repeated the process described above in the other two hosts effectively the content of vSAN brewing between the hosts and drop what I believe has been corrupted/no valid data on the host group could not be evacuated by the upgrade process.

  At the end of it, all my virtual machines survived the upgrade of vSAN.

  See you soon

  Andrew

• Cannot complete the recovery process after replacing HARD drive

  Hello

  I changed my hard drive it for 15 days because he showed abnormalities, so I bought a new hard drive Seagate Western brand with the same technical characteristics as the existing hard drive (product for the product).

  I was then on TOSHIBA HDD RECOVERY to burn to CD system recovery disks, then I went to replace the hard drive.

  After the change, I raised my PC with system restore CD.
  The procedure is successfully completed and orders of comments asking me to remove the disk and restart the PC.

  I raise the PC, everything goes well, launch windows, installation of perfect records system then comes the stage of installation and settings of the system here after the error message:

  "Windows Setup could not configure Windows to run on the hardware in the computer."

  Then it asks me to restart, then it comes back every time on this message, I'm stuck on this step.
  I tried to change the mode of the disc source hard 'compatibility' instead of 'AHCI' but it's even worse, it completely without error buggy.

  Please give me an explanation of this phenomenon.

  Sincerely.

  Guillaume

  Have you tried to repeat the whole recovery procedure?
  If this is not the case, do.

  I recommend to format the whole HARD drive and create an NTFS partition.
  Then start the laptop using the Toshiba Recovery disk and start the recovery procedure.

  I read about the problem of disk HARD similar in the past and especially NFS partition creation has helped to solve these problems.