Simultaneous use of different channels the same Module

Similar Questions

• I want to know if I can use creative cloud with the same account on different computers

  I want to know if I can use creative cloud with the same account on different computers, because my children want to she and I have known if I buy when I can use it on several computers at the same time

  If it is the individual subscription, you can activate on 2 computers only.

  However, there is no limit for installation, but you can connect and activate on 2 computers only.

  If you had already signed and activated CC apps on 2 computers, and there still if you want to activate on a 3' rd computer, you can simply disconnect one of the 2 comps, so that you can keep counties of activation.

  For more information, see the link below:

  https://www.Adobe.com/content/dotcom/IE/products/creativecloud/FAQ.html

• 6 of Lightroom cannot read my Canon 5 d Mark III photo files, the import message I received: the following files were not imported because they could not be read. I use the same camera that I used Lightroom 5 with the same cards Compact flash.

  6 of Lightroom cannot read my Canon 5 d Mark III photo files, the import message I received: the following files were not imported because they could not be read. I use the same camera that I used Lightroom 5 with the same cards Compact flash. The files are: DK5A0243. CR2

  Lightroom 6 trying to copy pictures to a different directory than what is Lightroom 5. That's why you have the problem.

  You can change the directory where you are teaching LR 6 to place photos, or change the permissions on this directory to read & write.

• The orange button Firefox used to be on the same line as tabs, how to move the tool bar of tabs to be on the same line as before?

  I now have the Firefox button orange on its own line at the top of the page, but it used to be on the same line as the toolbar tabs which takes less space. I know what happened before I put right but cannot get back them now on a single line.

  Make sure that you have selected cover via Firefox > Options.

  You also have to maximize the window to have the tab bar and the Firefox button in the title bar.

  You can also set the pref browser.tabs.drawInTitlebar Boolean to true on the topic: config page.

  • http://KB.mozillazine.org/about:config

• Satellite L550-117 - how to use VGA + HDMI at the same time?

  Hello
  I have a Satellite/Satellite L550 series Satellite L550 - 117.
  Can I use 2 monitors at the same time, using the function key (laptop screen + HDMI, VGA + HDMI, VGA, portable computer), but I would use "laptop screen", "VGA output" + "Output HDMI" at the same time (for example: to play a movie on an HD TV and work on the other two screens).
  I also want to play sounds on computer speakers 'and' an HDMI output, not the speakers for computer 'or' HDMI.

  Is it possible with this notebook and how?

  Thank you

  Hey Buddy,

  Good idea you have unfortunately it of not possible to use 3 monitors at the same time. You can use the internal monitor and an external monitor but not the two external monitors. This is not supported in the graphics card.

  Then, you use internal monitor, VGA connection or internal monitor + HDMI connection. That s what you can do.

• BlackBerry Smartphones using two BB with the same account of Blackberry.

  Currently, I have a BB 9900 and is considering obtaining a BBZ10. The 9900 has a standard sim card by which the Z10 I think a micro sim. (I still have to talk to my service provider relating to the regime of a sim 2)

  Is it possible to use two phones at the same time, if my provider allows, regarding BB services etc. using the same account etc?

  I thought that I have addressed this before first topic to contact my ISP.

  Thank you.

  Kind regards.

  You ask the subject from the BBID even on both devices?

  Yes, to a certain extent, on the data.

  E-mail and social accounts like Facebook and Twitter works perfectly.

  BlackBerry Messenger will use only a BBID on a device at a time... If you have the same BBID on both devices, you will need to choose which will be your active BBM.

  Of course, the main question to this is if your mobile operator will allow two SIM cards with the same account. Doubtful.

• Is it possible to use vSphere replication within the same site?

  Hello

  I was wondering if I could use vSphere replication in the same data center. The idea would be to have a configuration without shared storage appropriate for HA.

  Thank you!

  elgreco81

  Yes, it's not a problem at all. You can have a single unit of replication running and replicate to another data store.

  André

• Same colors that appear different in the same document

  I have a document where I filled the cells of a different picture of the same RGB color. However, they sometimes appear as two different shades, one darker than the other. I checked that it was the same RGB color and it was, but it looks quite different in InDesign and when I export to PDF. No idea why the same color is different in the same document?

  Full transparency on the page causes ID display a preview of the m slipped preview overprinting is enabled, so it can have an effect on the color, but I expect the change affects the spread.  Monitors fault may also have to backlight uneven which would cause this kind of change of color on a screen, but you will see areas of displacement remain in the same positions on the screen when you rotate the page, rather than rotate with the page if the problem is in the file.

• Filters in the way different on the same column

  http://img848.imageshack.us/i/screenshotwjk.PNG/
  
  If you take a look at the screen at the time there is view pivot that has about 10 columns one of them is the type of scene that always contains two values Foster Care child and current CPS, my requirement is if I click on the month column values if the month value is in the category Foster Care child, then he must pass three id filters , id of the person and if she has the current CPS then it must pass two filters case id and month is it possible if say me. I will be very happy if you can help out me.
  
  Thank you

  Already answered.

  Filters in the way different in the same report

• What is the use of FPGAS and how it differs from the IO Modules

  Hi all

  Maybe it's a silly question for most of you.  But I have very less knowledge about the basic concepts of electronic (FPGA, real-time) to cRIOs. I know that FPGA

  can be used to generate circuits within the chip that helps by some logical functions.

  I've just started working in the cRIO.  My question is that we have Modules e/s making it outputs all the application entry.  So, what is the purpose of e/s in the FPGA.

  Lets consider that we entered for an application of RTD.  In this case the module NI 9217 itself exits 24 bits of data from the RTD measurement which may be the process of the LabVIEW VI.  What will be this FPGA between the i/o Modules and the processor will help in?  Also I want to know what type of communication is used to send data between the FPGA and host modules.

  Thanks in advance

  Ajay HI:

  Sorry, you do not have an answer to your original question. However, you are right about the benefits of the FPGA. You said, if you build pre-processing in the FPGA, you can unload a lot of potentially CPU calculations out of the host processor. In addition, the program running on the FPGA is highly deterministic and can run the code very quickly. So if you build a kind of guard or evanescent dog part of your application, the FPGA is a good place to put it.

  To answer your other questions, communication between the modules and the FPGA is generally above the SPI and the data can be transferred between the FPGA and host via DMA FIFO operating on the PCI bus or single point save access using read/write in the FPGA host Interface controls. You can also use interruptions in signal of disputes between the FPGA host.

  I hope this helps, but let us know if you have any other questions.

• Set a style different cases for the same placeholder (data fusion) used two times in the same text

  Hello.

  I have a document with some parties updated with the fusion of data (via placeholders). Is it possible to set a style of different cases for the same placeholder in the same text. See the example:

  Mike runs its < < vehicule_placeholder > > in the city. But its < < VEHICULE_PLACEHOLDER > > is meant to be shared.

  If the value of this placeholder in the file merger is 'bike', the sentence should be:

  Mike runs his bike in the city. But his BIKE is meant to be shared.

  Is this possible? How?

  Thank you.

  You can do it. A character style for this configuration placeholder text, set in all caps.

• Redirect control using click in a State different os the same page

  Hi all

  I want to build an application to add text. It's like when I click a button say ADDTEXT it will be op [en a popup windoew and I'll write my text and press OK button to close that.] When I close the popup, you'll see the text on my page of the editor. Now, I created two States is beginning where the ADDTEXT button located in the other State (named addText) I put all accessiories to change the text like: color change, change of font etc.

  Now I want to redirect control the text "addText" to the same momet I click the OK button. I am not able to make this change. Please help me with this.

  Thank you

  Lali.

  have you tried

  currentState="stateName";
  

  ?

• Use several versions of the same material and the same LabVIEW code

  Here's my dilemma,

  I have many different s NI 9213 (16-channel thermocouple module) that I use in my lab. I only need to use one at a time, but I want to use the same LabVIEW code with each. I use NI MAX to create a task for the NI 9213 I use, but when I plug another 9213 OR in the computer I need to delete the first task and make a second tast with the second 9213 OR.

  My question is, is there a way to plug in different s 9213 OR the computer and without having to reconfigure the NI Max tasks? If so, how?

  Thank you

  Maddie

  Just use Concatinate String using the returned device name as well as the names of channel to build complete path name and then DAQmx create channel to add this channel to your task.

  

• Why different applications react differently to the same pressure tapping?

  MacBook Air (13 inch, mid 2013) Yosemite 10.10.5 e-mail version 8.2 (2104) and I am aware of the updates for these circumstances.

  I have noticed that when you use the e-mail the trackpad is too reactive to the look, so that the same amount of pressure on this site or

  another site on Safari (but not others, because it is more responsive on wikipedia as mac mail) might need more pressure or even strong look even receive a response at all.

  
  

  Is this something I do or a feature of these sites and applications?

  Previously I was clicking on listen and not from using tapping, this has started to (what I call over-sensitivity by the cursor using the trackpad on a MacBook Air):

  -Understand that Mac adapts to the user; I'm the only one using my computer, but would it not be part of his adjustment make listening to click before?

  -The idea that this "breaks" could be the battery swelling against the trackpad, but checked on the Mac 'of the battery"and he says that it is 'Normal '.

  -Have you noticed that if I'm particularly aware of my fingers and where they are EXACTLY, as well as the rest of my hand, that helps a lot, but nevertheless it can still happen even in this case

  -I don't think it's just me, as a friend using a different notebook (MacAir early-2015) has recently made the switch from clicking to eavesdropping and reported having the same problem.

  -J' read Sys Pref > Trackpad options but for as far as I understand, none seem to address the issue of the pressure and the responsiveness of the trackpad to eavesdropping. (Just put the cursor on an email and it opens or moves to a mailbox with what seems like no pressure tap at all or opens the message, it set up a response.) On wikipedia, for example it seems I am just passing on an item with the cursor and it opens the link.)

  Are there adjustments options to reactivity more personalized listening or helping me become more aware and

  of what I could do to cause this reactivity?  I can do the trackpad tap less responsive Mail where it's more annoying as one

  feels that they can lose a message here.
  

  Since this question is search discussion groups under "trackpad issues" and see that these are concerns that date back a few years with the MacBook Air, as far as I can see.

  In these discussions of 'clicks ghosts', a speaker asked if the person asking the question, had 'activate him slide' checked and if yes, they suggested unchecking it.  Sys Pref > accessibility > mouse and Trackpad > Trackpad options - where I tried NOT checking "enable drag". In the same place at Sys Pref, I unchecked "spring-loading delay. Both of these measures seem to be helping. 

  These two choices and a growing awareness (of exactly how light a touch is necessary - even a little nervous tap that I might not even know was going on before because I was using the clicking on rather than look) , it seems, has slowed the reactivity and the trackpad on the MacBook Air mid-2013 oversensitiveness.  For those most familiar perhaps you could comment on is it's possible use of a reagent trackpad, it would be greatly appreciated.  Thank you for your time and your consideration.  Because these choices seem simple and non-intrusive (at least for me) they can be worth a try for other people who also say that they have these issues with the trackpad being over-sensitive to the look.

• How one properly installed more than one printer all-in-one (different) on the same pcr?

  Once installed 1 All in one printer, how one installs another printer all-in-one (different model) on the same computer without altering the first installation because all software are the same for each all-in-one printer, with the exception of different drivers linked to each different model all-in-one printer?

  Hello Boothkp,

  From what I can understand in your post, you are looking for a solution install several all in printers on one system, without causing problems during the first installation. This can be easy.

  Lets say you have 2 printer that both use the version 14 of the HP Solution Center software. Then, you install the first complete printer with all the software you want to use. The second installation, you just select the option 'Add printer' or 'Add features', this will add then the second printer in the current center solution without a conflict.

  In case this does not work, then please give more information on the model and the operating system you are working on.

  Kind regards

  Van Baardewijk