Filters in the way different on the same column

Similar Questions

• Using different filters on the same measure in single result table (view)

  I have a table of twelve columns, each column with different filters tailor-made same table actually. Say a filter column (several people existing on 01/01/2003) comes from people dimension (date_of_birth < = January 1, 2003 ""). Two filter in column b (number of people living in Bucharest between 1 January 2004 and 1 January 2006 "") is (between 2004 and 2006 date_of_birth) etc.
  How do I use column a & column b in the same table of results (view)? I need the different filters on the same table.
  
  Thank you!
  
  Published by: seiciu on March 27, 2010 08:51

  Hello
  This filter clause works.
  filter (using Date = current_date)
  filter (using Date = date'2010-01-01')
  filter (measures using the year between 2004 and 2006)
  Concerning

• A target table is in charge of two different sources but the same columns, but a source is one database and another in a flat file.

  We all hope you are doing well.

  I have a business problem to implement in ODI 11 G. It's here. I'm trying to load a target table from two sources that have the same column names. But a source is to the file format and the other is in the Oracle database.

  That's what I think I'll create two mappings in the same interface by using the Union between the sources. But I don't know how the interface would connect to different logical architecture to connect to two different sources.

  Thank you

  SM

  You are on the right track, all in a single interface. Follow these steps

  (1) pull model of your data in the designer of the source file and your table model target to the target pane.

  (2) all relevant columns map

  (3) in the source designer to create a new dataset and choose as the UNION join type (this will create a separate tab in the source designer pane)

  (4) select the new dataset tab in the source designer pane and pull your source oracle table data model in the designer of the source. All columns that are relevant to the target card

  (5) make sure that your staging location is set to a relational technology i.e. in this case the target would be an ideal candidate because it is where the ODI will organize the data from source two files and oracle and perform the UNION before loading to the target

  If you want to watch some pretty screenshots showing the steps above, take a look at http://odiexperts.com/11g-oracle-data-integrator-part-611g-union-minus-intersect/

• an alphabet by typing in a cell gives drop down suggestions from previous hits on the same column. But how the drop down to choose the suggestions of the other columns and other sheets.

  an alphabet by typing in a cell gives drop down suggestions from previous hits on the same column. But how the drop down to choose the suggestions of the other columns and other sheets.

  Hi mdsavol,

  Your observations are accurate. The 'suggestions' are previous entries in the same column that correspond to what has been entered so far in the active cell. The only direct user control is to activate the function turn on or off in numbers preferences > general.

  There are other ways to include or exclude items of suggestions:

  • To remove typos in the suggestions list, the user must correct the typos in the cell above the active cell. If they are more in the list, they won't be presented as suggestions.
  • To include selections added to the list, the user must enter these suggestions in the individual cells above the active cell and column where they are wanted as suggestions.

  There was a request here a while there is a list of suggestion 'live' similar to those of some websites, which offers a descending list of possible entries as a type in an input box.

  The only way I see to reach a solution similar to what you have asked is to use as many lines at the top of the non-en-tete of the table section to list the items likely to repeat in your table, and then hide the lines. You'll need a list for each column where you want to use this feature with a list previously planted. Existing items will then require a likely hit up to three, then a click to choose from a list small enough to enter a value into a cell. News he will need to enter in full the first time, but after that it will be put on the list and answer the same thing as the terms preseeded.

  While your setting upward (or decide not to do), consider going on the menu of number (in numbers), choosing to provide feedback from numbers and writing a feature in Apple request. Describe what you want. Explain how he could help the average user numbers, and then hope for the best.

  Kind regards

  Barry

• Entries are concatenated in the same column in the excel file

  Hi, I really need help in this emergency. The problem is when I open the spreadsheet file after you run the program below, all the values that I believe are concatenated in the same column. However, there are 2 different analog inputs which I want in 2 different columns. I'm getting the 2 waveforms in the same graph, but when I open the excel file, it seems that the entries are concatenated in the same column. Someone knows how to fix this? Thank you very much.

  

  Hi Ben 64,.

  Thanks a lot again. I did as you said and I removed the dynamic data and logged files added directly to the results. I'm still checking if the program works as I can branch only when I return to work tomorrow. Tell me if you think it might be able to work this time. Thanks a lot again!

• Multiple values for the same column in the columns of diffétent in the same row?

  Hi all
  I wonder how you can display different values for the same column in different columns on the same line. For example, using a CASE statement, I can:
  
  CASE WHEN CODE IN ('1 ', ' 3') THEN COUNT (ID) AS 'Y '.
  CASE WHEN CODE NOT IN ('1 ', am') THEN COUNT (ID) AS "N".
  
  Yes, that will produce two columns but will produce null values to empty and also two separate registers.
  
  
  Any ideas?
  
  Thank you

  Are you sure that this code works for you?

  Select ID
           ,CASE WHEN MODE_CODE IN ('1', '3') THEN COUNT( No) END as "Fulltime"
           ,CASE WHEN MODE_CODE NOT IN ('1', '3') THEN COUNT( No ) END  as "Other"
  From table
  group by ID
  

  I guess the code above fails because MODE_CODE is not in your group by?

  My suggestion would be to put the CASE in the COUNT:

  Select ID
           ,COUNT(CASE WHEN MODE_CODE IN ('1', '3') THEN No END) as "Fulltime"
           ,COUNT(CASE WHEN MODE_CODE NOT IN ('1', '3') THEN No END)  as "Other"
  From table
  group by ID
  

  CASE expressions return no. when the respective conditions are true and NULL otherwise.
  COUNTY will have non-null values.

• By comparing the values in the same column

  Hello
  
  I have a requirement to do the following:
  
  The guest of the dashboard has two drop downs as 'Acct number 1' and others as 'Acct number 2 ". Both are the same column from the database. When two different values are chosen from the prompt, it should produce a report with the following 5 colomns, 'ACCT1', 'SALES AMOUNT ACCT1', "ACCT2", "SALES AMOUNT ACCT2", "DIFFERENCE".
  
  I tried to use a variable of presentation in the command prompt and it fills my column pther having the same value I have input for the first prompt.
  
  How can I do this? Thanks for your time and your help.

  Hello

  You can try it at the level of the report.

  * Ensure that you have set your guests with different effects. Suppose that the two PVs are acc1 and acc2.
  * Report, add below filter
  Account number is equal to @{acc1} {defualtvalue}
  OR
  Account number is equal to @{acc2} {defualtvalue}
  This will filter the report by the two account numbers.
  * Now apply below in your fx of all columns.

  "ACCT1: ' @{acc1} {defualtvalue}"
  ACCT1 SALES AMOUNT: FILTER (with the HELP of SalesCol (AccountNumber = ' @{acc1} {defualtvalue}'))
  "ACCT2: ' @{acc2} {defualtvalue}"
  ACCT2 SALES AMOUNT: FILTER (with the HELP of SalesCol (AccountNumber = ' @{acc2} {defualtvalue}'))
  DIFFERENCE: FILTER (with the HELP of SalesCol (AccountNumber = ' @{acc1} {defualtvalue}'))-FILTER (with the HELP of SalesCol (AccountNumber = ' @{acc2} {defualtvalue}'))

  Thank you

• Select literal values in the same column

  Hello
  like the practice:
  
  Select 'A', 'B', 'C' for double
  will select these values in their own column on the same line, is there a simple way to select these values in the same column on lines without first their insertion into a table?
  
  Thank you

  SQL> select 'A' x from dual union
    2  select 'B' x from dual union
    3  select 'C' x from dual ;
  
  X
  -
  A
  B
  C
  

  A bit complicated:

  SQL> select chr(ascii('A')+level-1) x
    2  from dual
    3  connect by level <=3;
  
  X
  -
  A
  B
  C
  

  Other:

  SQL> select regexp_substr('ABC','[[:alpha:]]',1,level) x
    2  from dual
    3  connect by level <= length('ABC');
  
  X
  ---
  A
  B
  C
  

  Max
  http://oracleitalia.WordPress.com

  Published by: Massimo Ruocchio, February 12, 2010 17:55
  added a second

  Published by: Massimo Ruocchio, February 12, 2010 17:58
  Added the third

• Two guests on the same column

  Hi Experts,
  
  I'm defining two different guests (and associate them with the two variables of different presentation) on the same column. However, when I view the 2 guests on the same dashboard page, whenever I select a value for the first prompt, the same value is automatically selected for the second line.
  
  Is this a normal behavior? How to capture the two distinct values?
  
  Thank you
  Guillaume

  Hi William,.

  I think I forgot something.

  You must do the following steps:

  (1) add the column to the dashboard command prompt.
  (2) in the column "Show" change the option to 'results '.
  (3) in the column "Column" change the formula of the column to a name like «filter 1"»
  (4) this column value to the variable in the presentation, such as FILTER1.
  (5) change the label for the column.
  (6) assign the filter in your report to the presentation FILTER1 variable.

  Repeat step 1 to 6 for the second filter.

  Kind regards
  Stijn

• Multiple constraints on the same column

  Hello experts, we can use Multiple forced on the same column in oracle as creating table, I want to add a key single and forced to check on the same column is this possible? Thanks in advance,

  If you want, seems to be possible

  CREATE TABLE t1

  (col1 VARCHAR2 (50))

  CONSTRAINT ck1 CHECK (col1 IN ('A', 'B', 'C'))

  CONSTRAINT PRIMARY KEY (col1) pk1

  );

• Two or more SRID in the same column?

  Hello, I am working with Oracle Spatial, and I have a problem with the SRID.
  
  I have a column in a table with the SDO_GEOMETRY type and I need to create a Spatial Index to use. But to create a Spatial Index first, I need to insert metadata into the table incluied SRID: for example
  
  Insert in user_sdo_geom_metadata (table_name, column_name, srid, diminfo) values ('Spatial_Test', 'GEOMETRIA', 8307, SDO_DIM_ARRAY (SDO_DIM_ELEMENT('LONGITUDE',-180,180,0.5), SDO_DIM_ELEMENT ('LATITUDE',-90, 90, 0.5)));
  
  But I need to work with more than one SRID in this column. Is there anyway to have two or more SRID in the same column? How? and if I insert them, can they give any problem?
  
  Thank you very much.
  
  Good bye.

  ZeyKa,

  . . . . You can transform and store all your geometries in SRID 8307 and then turn to their original SRID when you SELECT them.

  -- "Example: Transform geometry from  to SRID 8307 for storage"
  -- "NOTE: Replace  and  with your values"
  INSERT INTO MyTable (ID, geometry,RenderSRID) VALUES (1, SDO_CS.TRANSFORM(,8307), );
  

  -- "Example: Transform stored geometry back to its "
  SELECT SDO_CS.TRANSFORM(geometry,RenderSRID) FROM MyTable WHERE ID = 1;
  

  Kind regards
  Noel

• By subtracting the values in the same column?

  Hello
  
  How can I subtract two values in the column of the table. EG - there is a table with two columns with date and cumulative turnover.
  
  Date Total_sales
  ===== =======
  February 23, 68
  24 feb-122
  25 feb-150
  26-Feb-200
  27 feb-223
  
  I need to know about the date that sales have been maximum. As we can see on 24 - Feb, sales were 54. We do this by subtracting 122-68.
  How can subtract us values in the same column?
  
  Thank you

  Take a look at the lag() of analytic SQL function which should give you what you need.

  See you soon,.
  Harry

• How to find the same column name in different tables in the same schema

  Hello
  
  I find the 'ename' column name in different tables in the same schema.
  
  Thank you
  Nr

  Hello

  Try this query

  Select column_name, table_name from user_tab_columns where column_name = 'ENAME ';

  Award points and end the debate, if your question is answered or mark if she was...

  Kind regards

  Lacouture.

• ITS filter - adding several filters with the same custom attribute

  Hello
  
  I added the attributes of custom search and am able to add a filter to the doOracleSearch method.
  
  filter [0] = new filter (New Integer (100), 'NUMBER', 'equal', 10020);
  
  Now I have to add another filter for the same attribute of research with or condition, how can I do this...
  
  I tried the following...
  
  filter [0] = new filter (New Integer (100), 'NUMBER', 'equal', 10020);
  filter [1] = new filter (New Integer (100), 'NUMBER', 'equal', 10049);
  
  But how do I specify it's or and the code above does not work.
  
  Thank you.
  Vermorel.

  Here is an example of this using 11 g. Note that you need to connect programmatically if the data is secure.

  Create the search service and to define the URL of SOAP
  SearchService OracleSearchService = new OracleSearchService();
  searchService.setSoapURL ("http://myserver:7777/recherche/requete/oraclesearch"); ")

  Download the data to the research group
  DataGroup dataGroup = new DataGroup();
  dataGroup.setGroupName ("MyGroup");
  DataGroup dataGroups [] = new DataGroup [1];
  dataGroups [0] = dataGroup;

  Get a list of all the attributes to fetch
  Attribute [] attributesAll = searchService.getAllAttributes("en");
  ArrayList attributeIds = new ArrayList ();
  for (attribute a: attributesAll)
  {
  attributeIds.add (a.getId ());
  }
  Integer [] attributeIdArrayAll = Integer [attributeIds.size (new)];
  attributeIdArrayAll = attributeIds.toArray (attributeIdArrayAll);

  Create filters (BE sure THAT THE FILTER ID IS CORRECT - I do not pretend you code it but rather browse the list of all of the above attributes and get ID like that)
  Filter [] myFilters is new filter [2];.
  myFilters [0] = new filter (124, "Number", "EQUAL", "129224");
  myFilters [1] = new filter (124, "Number", "EQUAL", "123730");

  Request (be SURE to USE ' or ' as the operator between the filters)
  Result OracleSearchResult = searchService.doOracleSearch ("", 0, 50, false, false, dataGroups, "fr", null, true, 'or', myFilters, attributeIdArrayAll);

  Get number
  int hits = result.getEstimatedHitCount () .intValue ();

  Print results
  ResultElement [] resElements = result.getResultElements ();
  for (int i = 0; i)< reselements.length;="">
  {
  Download the document
  ResultElement doc = resElements;
  }

  I hope this helps!

• Different guests on the same column

  Gurus:
  
  I have a requirement where we need to have Date guests separated for 4 different promotions.
  Now, I was thinking about the presentation configuration variable, but then it does not work with 'Between' condition.
  
  So how can I compare a fact for 4 different promotions (Sun) with 4 dates different (Sun) in the same report?
  
  I don't know if this is possible.
  Please help me.
  Thank you.
  
  Vinay

  I'm not sure that I understand your question completely, but it seems you need to get the same value (say sale) measure for 4 different dates in the same table.

  My suggestions would be to create dims again and use union all with each union report report led at different times of Sun.