Since I use F10, my Vista PC can not access anything whatsoever

Similar Questions

• Since I set up Windows Vista, I can not close Windows Navigator. How do you turn it off?

  Since I set up Windows Vista, I can not close Windows Navigator. How do you turn it off?

  Hi, BillMarrale,

  Are you referring to the Windows Narrator?

  Go to control panel > accessibility > Ease of Access Center > explore all settings > use the computer without a display > untick the checkbox on Narrator byTurn > click Save...

• performance issues. I checked something who asked what I wanted at the start. So I can't access anything whatsoever. Any suggestions? THX.

  I went to system security - find and resolve a problem-check performance problems.  I checked something who asked what I wanted at the start.  So I can't access anything whatsoever.  Any suggestions?  THX.

  Hello

  • You receive an error message?
  • What exactly are you can't access?
  • What version of Windows are you using?
   
  You can refer to the following steps:
  Step has.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to start in safe mode of Windows 7.
  e. when Windows starts, you will be at a typical logon screen. Connect to your computer and Windows 7 goes into safe mode.
  f. do whatever tasks you need and when you are done, reboot to return to normal mode.
   
  Step B.
  If it works fine in safe mode try performing a clean boot in order to find the cause root.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

• Creative cloud began the download of an update, but stopped after the download of 5 percent. Nothing works now and I can't access anything whatsoever. Help please!

  Creative cloud began the download of an update, but stopped after the download of 5 percent. Nothing works now and I can't access anything whatsoever. Help please!

  Please remove Cloud Creative app using:

  • Using creative cloud | Uninstall the creative cloud desktop application
  • https://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html

  Install the cloud creative app - https://helpx.adobe.com/creative-cloud/help/install-apps.html

• Discover the apple n update. Now can't access anything whatsoever on iPad - how long before it is fixed?

  Seriously, how long do we wait? I have an iPad and now I can't access anything whatsoever. Cannot enter this program at all. This is not a happy person wrote this!

  Please see the post below updates on the issue of the revel facilities:

  Problem installing Adobe Revel 2.3.2

• Can only use safe mode and can not access anything except firefox

  Basically, there are a few days all of a sudden, a box came up saying Windows Explorer has stopped working. No matter what I click, it returns constantly to the rear. Because I use firefox, I can't to anything except this, and I can't get him if I use safe mode.
  It is terribly annoying, I have 6000 + photos and other things I need, i.e. duties.
  How can I fix? I can't use the normal mode, and it's annoying.
  Thanks in advance.

  Then download your data either by:

  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.

  2. you can start the target computer with a Bart PE (if you use XP) or a Linux live CD like Knoppix and retrieve the data in this way. General information about the use of Knoppix for this are:

  You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with sufficient capacity to store your data, OR an external hard drive formatted USB FAT32 (not NTFS) *. Download Knoppix .iso image file and create your bootable CD. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or the free ImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created, and Knoppix will be able to see the files in Windows. If you use the USB key or an external hard disk, right-click on its icon (on the desktop) to get its properties and uncheck "read only". Then click on it to open it. Note that the mouse action by default in the window manager used by Knoppix (KDE) is a simple click to open instead of double-click traditional MS Windows. If you want to burn CD/DVDs, use the K3b program.

  * My understanding is that you can now write on NTFS from Linux partition. If you wish to do this, Google for instructions on the use of the NTFS driver.

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  Then do a restore clean factory/install of Windows.

  I want to emphasize that you should not take what I wrote as a definitive diagnosis. I can't see or test your computer from here. I give you my opinion on your computer based on my experience as a computer tech and what you have written. If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). MS - MVP - Elephant Boy computers - don't panic!

• Since the update of 31.0 I can not access Google or Facebook. I'm on a MAC and don't have a firewall or antivirus

  I'm on a MAC OS X version 10.9.4
  Firefox browser version 31.0
  I have not implemented to firewall
  I have no security or virus protection software

  Since my browser is automatically updated to version 31.0 Firefox that I can't access:
  Google. com or facebook.com

  Also, when I type a url in the address bar and then click the < return > key I type url (ex: Google.com or facebook.com) disappears and the previous url in the address window appears.

  Help, please.

  Then I restarted Firefox, deleted all cookies, started in safe mode, disabled IPv6 and nothing has worked.

  I turned off my Mac. Let it take me a long pause and then I restarted my MAC at home (I had been in a coffee in coffee WiFi when I encountered the problem) and now the problem is solved.

  Sometimes technology is crazy.

  Thank you all for your suggestions and help, like I knew exactly what fixed the issue but at least it is fixed.

  Have a great Friday and a great weekend.

• I got a Firefox 7 automatic update at home. Now, the internet does not work. It "hangs". I can't access anything whatsoever. Why?

  I need help. I can't use my PC at home (laptop) more access to internet using Firefox 7: no contact. Before you can update everything was OK. I received a warning that some versions of Java were not comatible with Firefox 7. Since Firefox 7 did not work, I have updated Java but still the same.
  I need to change to Opera if you can not help me, but I can't find my Internet favorites. Where are they located?

  C:\Users\Your account\AppData\Roaming\Mozilla\Firefox\Profiles\Your default\bookmarkbackups profile.

• deleted account aministrator that a moment can not access anything on the computer of Mr

  I download microsoft and Microsoft Media Player restore my computer to a backup point well today, I deleted my administrator account on my computer going down the old person of my computer that I was given. Now I don't have access to my account, but the limited user account.  Is there something I can do?

  Hello

  1. what operating system is installed on your computer?

  I suggest that you try to do a system restore to the point just before that you deleted the account.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  (For Windows Vista)

  How to restore Windows XP to a previous state: http://support.microsoft.com/kb/306084

  Hope this information is useful.

• Files on the external drive have changed to shortcuts, can not access.

  I click on an element and it says the following to "the item this shortcut referred to in jaemaat.scr has been changed or moved. "so this shortcut will no longer work correctly you want to remove?" but the record still shows the same amount of spaced used as before that the question (32.8 GB used from 265 GB). I clicked to display hidden files as shown here, but has not seen a virus when I click on new folder. I scanned with Norton and it found 2 problems and fixed but I can not access anything whatsoever. How can I recover my files? Also does it matter if I'm not on the same computer I have initially oploaded files from, he gave me a little old and slow.

  I try on a windows vista computer, my old one was a version of windows 2004

  Hello

  I suggest to refer to this link and follow the steps in this link and check if that helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/files-on-external-drive-have-changed-to-shortcuts/695db4cc-645f-4BD1-85c7-41671457fe11

  It will be useful.

• Satellite L350: Can not access the recovery partition by pressing 0

  Heya

  I can not access the recovery on a Toshiba L350 Manager. I tried pressing 0 (zero, two of them) at first to access HD-recovery, but nothing happens. Is there something obvious that I'm missing?

  The reason why I want to access is:
  I have a l350 Toshiba with a partially installed windows here. For now, he gets the "starting Windows" and "instalation program's services began" (in Norwegian) which stops with a popupbox saying: "the computer unexpectedly inexplicable, or an unexpected error has occurred. The site amenities cannot procceed. To install Windows, you will need to click ok to restart the computer. Start the installation process. ».

  What started the problem was that during the last part of the installation (after Win7 becomes usable, but above all has been installed), escape was pressed, and the computer has been used normally.

  > I can not access the recovery on a Toshiba L350 Manager. I tried pressing 0 (zero, two of them) at first to access HD-recovery, but nothing happens. Is there something obvious that I'm missing?

  I assume you are using a European model for laptop and so you should try it;
  -Press on F8 laptop computer power on.
  -Then choose fix my computer
  -Then Toshiba HDD Recovery.

  This should allow you to start the Toshiba HDD recovery process.

• XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon

  someone on this planet knows!

  XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon (it shows the IP etc. When hovered over with the mouse). tried fix & checked all the rest including the settings found on the masses of internet sites. don't think that this problem is so widespread and not final fix?. someone must know the answer. both computers have norton 360 v6. !. two computers use internet very well through the same network switch. two computers worked flawlessly again, no repairs, no reinstall, not zero other problems ever (always ran 360 and first market backup battery).

  Hello
  I recommend that you search/post this question on the link below:
  http://social.technet.Microsoft.com/search/en-us/?query=networking%20with%20Vista&refinement=112&AC=1
  b Eddie

• I use a Windows Vista I can connect to my tv wireless?

  I use a windows vista I can connect to my tv wireless?

  I use a windows vista I can connect to my tv wireless?

  You can if you have a wireless converter.

  Wireless PC to TV:
  http://www.Amazon.com/Warpia-StreamHD-wireless-full-1080p/DP/B004GTN0T4/ref=sr_1_1?s=electronics&ie=UTF8&QID=1317710448&SR=1-1

• I need to re - install windows vista but can not find my disk

  Gave up my old hard drive to the laptop and I need Windows vista but can not find my disc can I download it for free if so microsoft where any help would be great

  Thank you very much, Nik

  Hello

  There is no Windows Vista downloads available from Microsoft.

  Contact the manufacturer of your laptop and ask them to send a set of recovery disks.

  They should do this for a small fee.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  See you soon

• How can I access the album artwork for printing. It is used to be simple, that now I can not find anything

  How can I access the album artwork for printing on a CD? It is used to be simple, that now I can not find anything

  (Retina Powerbook 15, OSX 10.11.2, Itunes 12.3 2.35)

  Right-click on the right track... Get info... Select album art... Drag it to the desktop

  print it from there.