Single instruction is executed without selecting

Similar Questions

• Windows does not start on my old compaq to 4 year with Vista Home Premium. I followed all instructions self-help without a bit of luck. (I recently added a dongle broadband from O2 to my pc.)

  File: \Windows\ config\ 32\ system

  status: 0xc0000017

  Info: windows failed to load because the system registry is missing or corrupted

  I followed all instructions self-help without a bit of luck. (I recently added a dongle broadband from O2 to my pc.

  Hello

  1. who did you try all the steps?

  2 did you change on your computer?

  Method 1:

  I suggest you follow the link and check...

  How can I fix a startup (startup)?

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

  I also suggest you to follow the link and check.

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Method 2:

  I also suggest you to perform the system restore and check.

  System Restore: Put the computer to an earlier point in time, when everything worked well. If the system restore is a recovery preinstalled on your computer option:

  Restart the computer manually.

  (a) do one of the following:

  a. If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  b. If your computer has multiple operating systems, use the arrow keys to select the operating system you want to repair, and then press and hold F8.

  (b) on the screen Advanced Startup Options , use the arrow keys to select repair your computer, and then press ENTER. (If repair your computer is not listed as an option, then your computer does not include restoration of the system as a preinstalled recovery option.)

  (c) select a keyboard layout and then click Next.

  (d) select a username and password, and then click OK.

  (e) on the System Recovery Options menu, click System Restore. Put the computer to an earlier point in time, when everything worked well.

• Make a group without selection of all paths

  I'm working on a script that will take each pathItem in a document and put it in a group (all pathItems in the document are groupless opening, so there won't be other groups already in the document).

  I have a script that creates a group, and then puts the highest pathItem placed in the group. I just can't figure out how to retrieve all the pathitems in the document, or the same action in a loop until everything is in a single group. The kicker is, as the title suggests this script should work without selecting anything first hand (in other words, after click on an item to select). Now, if there was a way to select all elements with a script that would be great.

  Here's what I have so far:

  #target Illustrator
  //based on script from Carlos Canto
  var doc = app.activeDocument
  
  if ( app.documents.length > 0 ) {
  doc = app.activeDocument;
  newGroupItem = doc.activeLayer.groupItems.add();
  }
  
  var gi = doc.groupItems[0]; // the topmost existing group
  var all = doc.pathItems[0]; // all paths in document
  
  all.move (gi, ElementPlacement.PLACEATBEGINNING); // move selected path inside the group
  all.evenodd = true; // necessary to determine "insideness" or to make holes.
  
  

  I also have what I found here on the forum

  #target Illustrator
  // GroupFromSel.jsx
  // regards pixxxelschubser 
  if ( app.documents.length > 0 && app.activeDocument.selection.length > 0) {
      var aDoc = app.activeDocument;
      var Sel = aDoc.selection;
      var GroupFromSel = aDoc.groupItems.add();
      for ( i = Sel.length-1; i >= 0; i--) {
          Sel[i].moveToBeginning( GroupFromSel )
          }
  }
  
  

  But alas, you select so two scripts, two solutions possible. I'm just working on both until I can get one to work.

  Any ideas?

  var all = doc.pathItems[0]; // all paths in document

  It's only the highest pathItem, that to change

  var all = doc.pathItems; // all paths in document
  

  .. .and loop thru 'all' and move each within your group

  #target Illustrator
  //based on script from Carlos Canto
  
  if ( app.documents.length > 0 ) {
      doc = app.activeDocument;
      var gi = doc.activeLayer.groupItems.add();
      var all = doc.pathItems; // all paths in document
  
      for (i=0; i
  for this configuration, we will run trouble if you have other groups with pathItems
  		   

• Can I click on an object as a starting point for slide without selecting it?

  Hello

  I would like to know if there is a way to begin to drag the point on the surface of an object without selecting it.

  Thank you in advance.

  It would have helped you said what tool you drag with.

  like making a rectangle that represents the area of selection

  You're talking about what we call to make a selection rectangle.

  I'm looking for a way if I can just click on a surface of an object without actually clicking on it so I can just start dragging carefully.

  Read what you just said: '... ". Click on a surface of an object without actually clicking on it... »

  What you ask is really: is there a way of mousedown on an object with one of the selection pointers without selecting the object, in order to begin a selection rectangle?

  This is essentially what the Lasso selection tool. But it is not rectangular selections and cannot be forced to do so (no 'elastic' modifier as in Photoshop). He also disrespects of clichés, if it's important to what you're trying to do. Nor can he will strive to select entire paths he touches by pressing the Alt key, as can be done with the white pointer.

  We could probably expect black and white pointers to work like this:

  1. click on an object. (The object is selected.)

  2. press SHIFT and mousedown (not mouseup) on the object. (The object becomes unchecked.)

  3. start to drag. (Starts a selection rectangle).

  But they do not.

  Selection of Illustrator pattern is and has always been the worst class among public drawing programs. Needless to multiple tools, badly implemented, that all together can not do a single tool can do in other programs.

  Much trouble of selection is avoided in other programs by providing a "touch sensitive" toggle in other words, the ability to define a selection tool to select all its renowned keys, (such as Illustrator) or to select only objects that completely surrounds the marquee.

  For a long time, I suggested that we should be able to "convert" any path given to a selection or a path to the Cup. (Illustrator may not correctly cut its own paths, either.)

  IE7

• How to select multiple lines of text (without selecting all the text) within a title? (Holding Cmd does not work)

  I need to select several lines of text (in the various sections of the text) within a title without selecting any text. Holding Cmd like you would in other applications does not work, and now Shift selects all. Does anyone have a solution?

  Thank you.

  YYou cannot select several segments of text in a text block.

• Payment service returns 'purchase successful' without selecting the mode of payment (in sandbox mode)

  Hello

  I'm testing in-app purchase in my app (BB10). I added my id in sandbox mode. I go through all the messages of payment and without selecting any mode of payment (paypal/credit card), it returns successfully. is this correct behavior?

  There is free of charge with the sandbox test, so flow you state sounds as it should. Direct mode test load actually does more validation would occur before returning a result.

• It is possible to select a column of text tabbed without selecting the adjacent column of the tabulated text?

  I have two columns of text created with tabs. I want to select the first column without selecting the second column (I want to format the first column differently). Hope it would be possible to drag a marquee on it and have it select but apparently not. Will do it line by line, but for later use, would like to know if there is a way.

  David

  Creates the tabbed table text would allow you to do. It will give you much more control over the formatting as well.

  To change the text tabs in a table, select the text with tabs and choose table > convert text to table.

• Close the startpoint and endpoint without selecting the first

  Hi guys,.

  I'm working on an image of polygon which means I have created hundreds and hundreds of small triangles with the path tool.

  Now, I have wondered if it is possible to create two lines of the triangle in hand and close the last third line of triangles in shortcut.

  There may be a shortcut (or almost) to connect the beginning and the end of a path? I know I can do it by clicking on cmd + J, but I first select the points which is more work than simply connecting them to the hand. It would be perfect if there's any way to close it without selecting it first, so that I can do an 'action' out of it with a shortcut!

  Any ideas?

  Pathfinder unite.

• Launch of Mocha without selecting a clip

  Is there a way just to start Mocha for AE without selecting a video clip in a model.

  If this isn't the case, it will be nice to have this feature.

  None

• How do I focus a ListCell without selecting it?

  Hi all experts of JavaFX 2,

  I have a ListView with cells created with the CheckBoxListCell.forListView factory (...). I wonder if it is somehow possible to focus a ListCell without selecting it. At least caspian.css defines this special report and I am trying to create a custom style and I need to test the '.list-view: .list-cell concentrate: concentrate "(and not selected!) State.

  Thank you for your support!

  WhiteAntelope

  listview.getFocusModel () .focus (row) will show you the CSS style of development for the given row. Alternatively, use ctrl + arrow up / ctrl + arrow down to move the focus in the ListView control after clicking a row inside.

  -Jonathan

• How to get the everypageitems up, down, let's just without selecting values

  Hi all

  Is it possible to find all values for top, left, right, bottom without selecting this particular pageitems PageItems in a script.  Already, I had by Visual basic. But without selecting the particular pageItem, I couldn't get the value. If I select the particular pageitem via loop I can easly get it. Kindly advice me the possibilities and the solution.

  Thanks for looking into this...

  Hello

  Not exactly what you are looking for. But you could bring together the left, top, right and bottom values of each element of the page and store them in the array like this (using javascript):

  myPathPos = new Array();

  myDoc = app.activeDocument;

  for (i = 0; i

  myPath = myDoc.pageItems [i];

  myPathPos [i] = [myPath.left, myPath.top, myPath.left + myPath.width, myPath.top - myPath.height];

  }

  Then extract them with myPathPos [0] [1], for example, which will give you the value of the first pageItem in your document.
  See you soon

• Hi I have a question about the unique row function executed a query "select lower ('test' |)» SYSDATE + 1) twice; "fails when as" Select lower (sysdate + 1 |) " (' test') twice; "is executed without error?

  SQL > select lower (sysdate + 1 |) (' test') twice;

  LOWER (SYSDATE + 1

  ---------------

  07 jul-2014test

  SQL > select lower ('test' | + 1 sysdate) twice;

  Select lower ('test' | sysdate + 1) of the double

  *

  ERROR on line 1:

  ORA-01722: invalid number

  The query fails because it cannot perform arithmetic (+ 1) on a channel not digital.  However, the query that successfully interpreted the arithmetic in the first place, that it concatenated the string 'test' to it...  Make sense?

• Select all the messages and support those want to register without selecting him coming all out

  Another email I was able to select all and then click ones I wanted there without taking off select them highlighted. If I do this with Mozilla, we highlight the rest. I have over 3,000 and the need to delete without having to move the others I want to left. How can I do this?

  CTRL + A = select ALL.
  Shift + click = Select all between clicks.
  CTRL preserves the State and allows clicking on selected to deselect and vice versa.

• AnyConnect tunnel-group automatic assignment without selecting any group-tunnel-group-list alias and user-group strategy.

  Objective is that the anyconnect user must select group-alias, so that when a user enters his username and password he must go to his political group and tunnel-group specific. as I removed this command in webvpn 'no tunnel-group-list don't enable '. This I can not connect (user does not authenticate).

  1 - my question is why his past does not?

  Solution:

  If I keep only a single tunnel-group by default and make several group policies and assign to each user with his specific group policy that it works. in user attribute means I have only question following the commands it works, but if I put "group-lock value test-tunnel" that it did not identify.

  Please explain why.

  WebVPN

  allow outside

  limit the cache-fs 50

  SVC disk0:/anyconnect-win-3.0.10055-k9.pkg 1 image

  enable SVC

  internal strategy of group test-gp

  attributes of the strategy of group test-gp

  VPN-tunnel-Protocol svc webvpn

  the address value test-pool pools

  username, password test test

  username test attributes

  VPN-tunnel-Protocol svc

  group-lock value test-tunnel

  Strategy Group-VPN-test-gp

  tunnel-group test-tunnel type remote access

  attributes global-tunnel-group test-tunnel

  Group Policy - by default-test-gp

  tunnel-group test-tunnel webvpn-attributes

  allow group-url https://192.168.168.2/test

  Yes, you have the right solution. You only need to create 1 group of tunnel and multiple group policy. Under the attribute of the user, you re then group policy of vpn that you want the user assigned too.

  You can also authenticate users against AD and configure ldap attribute map to map the user to a specific group policy automatically.

  Here is an example of configuration if you happen to have the AD and will authenticate against AD:

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00808d1a7c.shtml

  Hope that helps.

• Lightroom 6: can I saw a preset in the picture window full size (rather than the browser) without selecting it?

  When I hover over a preset, I can get a preview in the browser window, but I prefer to see it full size without actually select it (because I can't cancel it whenever I don't like the preset)

  Hi richstanjohn,

  I tried to do the same thing at my end, and it is not possible. If you do not want all the time, then just move your mouse over the presets and look at the image in the browser.

  You can put your request: feature request/Bug Report Form

  Kind regards

  ~ Mohit