Single quotes prevent Email sending
I have 10 Coldfusion with all updates applied and I have problems to send email with the intrusion via CFMAIL tag. It seems that the spooler will not just send e-mails with an apostrophe in the address. Any thoughts on how this problem could be solved?
Well, after doing some research more I think this made do with qmail and not ColdFusion. Vishu, thank you very much for your help and pushing me in the right direction.
Tags: ColdFusion
Similar Questions
-
REGEXP_LIKE help literal single quote
I'm writing a check constraint to validate e-mail addresses which may include an apostrophe in the email address. Like joe.o'[email protected]. Here is my sample configuration:
He dislikes *------'? *create table emails ( email_address varchar2(150) ) / insert into emails values('[email protected]') ; insert into emails values('[email protected]') ; insert into emails values('joey.o''[email protected]') ; commit; sql> select * from emails; EMAIL_ADDRESS ------------------------------------------------- [email protected] [email protected] joey.o'[email protected] alter table emails add constraint email_address_format_ck CHECK ( REGEXP_LIKE ( email_address, '^[a-z0-9._%-]\'?+@[a-z0-9._%-]+\.mil$','c')); ERROR at line 2: ORA-00911: invalid character
My understanding is that this means one or more of the single quotes. Does anyone know the correct syntax to accept apostrophes?Hello
chris227 wrote:
In addition to the detailed information given by Frank, I would add a thought on the?.
I think that the intention of the? subsequently is that there should be only one or none "."Good point!
So it could take into account
select * from emails where REGEXP_LIKE ( email_address, '^[a-z0-9._%-]+['']?[a-z0-9._%-]+@[a-z0-9._%-]+\.mil$','c')
That exceeded that, if there is a single quotation mark, should not be the first character, and must not enter immediately before the "@".
It also requires that it is at least 2 characters before the "@" when there is no single quote. To allow only 1 before the "@":SELECT * FROM emails WHERE REGEXP_LIKE ( email_address , '^([a-z0-9._%-]+''?)?[a-z0-9._%-]+@[a-z0-9._%-]+\.mil$' , 'c' ) ;
The single quotation mark didn't need to be in square brackets.
-
"Thunderbird email send options, format text, areas of HTML, HTML DOMAIM NAME, domain name, domain HTML HTML adds:" what is it? Should I come in here as a domain sending HTML name? I have no idea.
I can't send email. It seems that I need to configure the options of sending by sending a message. Yes? Help, please!
Thank you. Ken [[email protected]]
I doubt that this has nothing to do with your problem sending.
Used as a plain text email. Some users prefer the plain text and use nothing else.
Most users expect to be able to use the fonts, the colors, the font styles (bold, italic, underlined) and to be able to insert images and other graphic elements. To do this, you must use the HTML.
To avoid annoying the first group, you can add to your address book and set their preference for plain text, on a whim of a base.
If, say, in your workplace, it is planned to use signatures fantasies with pictures, or messages are required to comply with the internal rules regarding fonts or layout, then all related work email will need to use HTML. So you could add to your field of work (the part of the e-mail to the right of the symbol @) to the area of the HTML fields in the dialogue you have shown above. And you would probably add domains customers and suppliers too, since all your messages that will also be required to use your formal rules.
-
With the updated 31.4.0 version - demand for return confirmation and email send priority disappeared.
How can I access them now?Thank you!
Did? I find in the title bar of the alternatives
-
First HP: how to enter a number complex, using single quotes
Hello
This is probably a stupid question, but how do you enter a charager apostrophe on the first HP RPN mode?
I read the section in the guide of the user on enteringer a complex numbers in RPN mode. Using (3.4) works fine, but I'm curious to know how to enter using the method indicated in the doc:
"In RPN mode, complex numbers must be in single quotes and require an explicit multiplication.
For example, 3-2 * i'. "For the life of me, I can't find the character of simple-qoute. Maj 9' does not work.
It's late and without a doubt, it is right in front of me, but I can't. I feel a "time da come...» »
Thanks in advance,
OK, found it... (Maj)
(I cheated and google it)
-
check spelling
I want to have the spell checker for set email sending to automatically check spelling when I send the mail. I did, but my spell checker is set by default to a French dictionary. How is it still happen? and how can I get it back to English? It's not an option in the menu drop-down button. There is only the French. HELP!You no longer have the correction spell checking capabilities in some languages in Outlook Express 6.0 after you install the Microsoft Office 2007 or Office 2010 system
http://support.Microsoft.com/kb/932974Outlook Express cannot use the check spelling of MS Word in Office 2007 or newer. A free spell-checking the download is the easiest way to get around this.Vampirefo spell check.Download from Major Geeks:
http://www.MajorGeeks.com/download.php?Det=2952Or upload it to SnapFile:
http://www.SnapFiles.com/get/spelloe.htmlYou wanted TinySpell or. (Check spelling while typing).Download it here:
http://www.tinyspell.M6.NET/Australian English spell checking
(Also suitable for other English speaking countries).
http://www.justlocal.com.au/clients/oespellcheck/If you have an earlier version of Office, see this:
http://www.Outlook-tips.NET/archives/2006/20061228.htm -
E Print - is there a way to prevent email addresses in its list to be deleted?
Hello
Is there a way to prevent email addresses in its list to be deleted by the printer when not in use?
The printer is a HP LaserJet 500 color M551
Email addresses remain on the list allowed for a few hours without being used, but will be removed after a few hours if they are not in the history of printing, and I get this message in the e-print settings: for convenience, we will be prepopulate e-mail addresses allowed in those who have recently sent jobs to your printer. Add new and remove those that you do not want on the list.
After this message appears all the addresses of e-mail that have not been used recently is going to get removed from the list.
Can someone explain how to fix this please
I refer to this post here and try the procedure that there are listed in an attempt to solve your problem. He helped other clients in the past who have been problems backup / make changes to their list of allowed senders. I hope this helps.
-
My email sends messages to my friends contacts, how can I fix?
Original title: MSN problemsMy email send messages to contacts of mine, with a link to a site of Viagra... How can I fix?
Hello
Are you referring to Windows Live Hotmail?
Check out the links and check if that helps:
Scams by e-mail or web: how to protect yourself
http://www.Microsoft.com/security/online-privacy/phishing-scams.aspx
Phishing: Frequently asked questions
http://www.Microsoft.com/security/online-privacy/Phishing-FAQ.aspx
If you are having problems with Windows Live Hotmail, I suggest you send your query in the link given for assistance.
http://windowslivehelp.com/product.aspx?ProductID=1
See also:
How to contact MSN customer service
-
Why my email 'send' before that I did write?
Why my email 'send' before that I did write? I can be in the middle to write an email and "poof"... it's gone. Very aggravating! Anyone can shed some light on this? Thank you!
original title: keyboard problem?I've actually seen that happen to hit the pavement sliding on the laptop. To test, try using an external keyboard and see if it happens. Personally, I always cut glide pads that I have the same kind of questions when you type :-)
I hope this helps.
-
Compatibility programa Email Sender Deluxe
Hola, utilizo el programa Email Sender Deluxe desde hace muchos Años con Windows XP y nunca tuve problemas... ahora con mi Windows 7 Home Premium are IMPOSIBLE hcerlo funcionar can someone help me? Gracias
Hello
The forum in which you've posted is for English only. Please select your language by clicking on the globe on the page down to the left to post your question in the language of your choice. If you can't find the desired below language, support for additional international sites options are by following the link below:
-
What type of eloqua email send should I use to send an email more than once to the same beneficiary?
In the canvas on the box email, there is a parameter that must be checked in order to send the same e-mail several times for the same contact. Enable 'Allow emails to be retransmitted to previous winners' and you're ready.
-
How to use special characters (single quote) in input values?
I have a query that contains a clause: field: tags_set
(the field contains string values)
I would like to test in sqlplus.
I found this article https://asktom.oracle.com/pls/apex/f?p=100:11:0:P11_QUESTION_ID:113012348062 explaining how to define variables in sqlplus.
However, my variable should contain something like ("xyz", "abc")
I tried
SQL > tags_set varchar2 variable
"SQL > exec: tags_set: = '(' musique');
"START: tags_set: = '(' musique'); END;
*
ERROR on line 1:
ORA-06550: line 1, column 23:
PLS-00103: encountered the symbol "MUSIC" when expected in the following way:
* & = - + ; <>/ is mod remains not rem
< an exponent (*) > <>or! = or ~ = > = < = <>and like2 or
like4 likec between | submultiset of type multiset Member
The symbol ' * was inserted before 'MUSIC' to continue. '
;
Then I did some research and found: characters in queries
Therefore, I changed the previous for:
SQL > exec: tags_set: = '(\'Music\')';
START: tags_set: = '(\'Music\')'; END;
*
ERROR on line 1:
ORA-06550: line 1, column 24:
PLS-00103: encountered the symbol "MUSIC" when expected in the following way:
* & = - + ; <>/ is mod remains not rem
< an exponent (*) > <>or! = or ~ = > = < = <>and like2 or
like4 likec between | submultiset of type multiset Member
and finally
SQL > exec: tags_set: = "{('a ')}";
START: tags_set: = "{('a ')}"; END;
*
ERROR on line 1:
ORA-06550: line 1, column 24:
PLS-00103: encountered the symbol "A" when expecting one of the following conditions:
* & = - + ; <>/ is mod remains not rem
< an exponent (*) > <>or! = or ~ = > = < = <>and like2 or
like4 likec between | submultiset of type multiset Member
The symbol ' * was inserted before 'A' to continue. '
What is the way to make it work? (I know that I can move to something like "xyz ~ abc' and treat inside the query")
Thanks in advance.
A number of things. When you define a string variable, you must give him a length or default is 1. You can escape a quote character by doubling it (i.e. two single quotes) or you can use the q rating:
SQL > tags_set variable varchar2 (100);
"SQL > exec: tags_set: = '('' musique '');
PL/SQL procedure successfully completed.
SQL > print tags_set
TAGS_SET
--------------------
("Music")
SQL > exec: tags_set: = q '{("music", "Drama")}';
PL/SQL procedure successfully completed.
SQL > print tags_set
TAGS_SET
--------------------
("Music", "Drama")
John
-
Import of single quote + script
Hello world
I use FDMEE 11.2.3Hi got in my data several fields and look..., XXX, XXX',..., 2000
I'm not even match the value XXX'XXX but it seems that I can't load data from tent to convert a nonnumeric value in number and I do not understand why.
I tried to solve this problem with a script BefImport trying to replace the "character without success. Also, I don't know what it is bad in my syntax.
If fdmContext ["LOCNAME'] == 'YYY ':
fdmAPI.logInfo (fdmContext ["LOCNAME"])
Try:
filename = fdmContext ["FILENAME"]
Inbox = fdmContext ["INBOXDIR"]
fdmAPI.logInfo (filename)
fdmAPI.logInfo (inbox)
file = inbox + '\\YYY\\' + filename
file_out = inbox + "\\YYY\\" + file name ".out".
fdmAPI.logInfo (file)
end = open (file, "r")
who cares = open (file_out, "w")
for the end line:
lineIni = line.replace ("', '_')
care. Write (lineIni)
end. Close()
care. Close()
except IOError, err:
fdmAPI.logError ("My error" + str (err))
OS. Remove (file)
OS. Rename (file_out, leader)
Does anyone has any ideas on this?, why it takes "as a comma?
Thanks and regards.
Hello
Yes I copied the script of the solution and turn. Now, I finished digging into it and, apparently, a single quote ' is a wildcard is solf put that------in the script before the quotation mark as follows (maybe it will be useful to someone else):
If fdmContext ["LOCNAME'] == 'DSLWGLMulti ':
fdmAPI.logInfo (fdmContext ["LOCNAME"])
Try:
filename = fdmContext ["FILENAME"]
Inbox = fdmContext ["INBOXDIR"]
#filedir = fdmContext ['FILEDIR']
fdmAPI.logInfo (filename)
fdmAPI.logInfo (inbox)
file = inbox + '\\DSLWGLMulti\\' + filename
file_out = inbox + "\\DSLWGLMulti\\" + file name ".out".
#file = inbox '-' + filedir + "\\"+filename. "
#file_out = inbox + "\" + filedir + "\\"+filename + «.out "»
fdmAPI.logInfo (file)
end = open (file, "r")
who cares = open (file_out, "w")
for the end line:
line = line.replace('\'','')
care. Write (Line)
end. Close()
care. Close()
except IOError, err:
fdmAPI.logError ("My error" + str (err))OS. Remove (file)
OS. Rename (file_out, leader) -
Dynamic processing of single quotes in SQL
Version: 11.2.0.4
I'm kinda a beginner when it comes to dynamic SQL.
I had a condition in which I had to run the following command on all the data files in the DB.
-Expected results
change datafile resizing '< Filename >' database 10g;
The name of file, which is generated dynamically must be in single quotes.
-Sample data
create table x (file_name varchar2 (90));
Insert into x values ('/ u04/oradata/ORCL/system.dbf');
Insert into x values ('/ u04/oradata/ORCL/sysaux.dbf');
Insert into x values ('/ u04/oradata/ORCL/users01.dbf');
I managed to do it using a similair below code. But I had to do several things of trial and error to get this working in reason to get the correct number of single quotes for the string generated for v_sql below. So, I want to rethink the basics.
declare
v_sql varchar2 (350);
Start
for rec in (select x file_name)
loop
v_sql: = "alter database datafile"'| " Rec.file_name | " 'resize 10g;
-RUN IMMEDIATELY v_sql;
dbms_output.put_line (v_sql);
end loop;
end;
/
ALTER database datafile ' / u04/oradata/ORCL/system.dbf' size 10g
ALTER database datafile ' / u04/oradata/ORCL/sysaux.dbf' size 10g
ALTER database datafile ' / u04/oradata/ORCL/users01.dbf' size 10g
PL/SQL procedure successfully completed.
I would like to know the role played by each single quote. I used 8 apostrophes in the V_SQL variable above, and I numbered each single quotation mark as shown below.
1 234 567 8
| ||| ||| |
v_sql: = "alter database datafile"'| " Rec.file_name | " 'resize 10g;
Example of output from the generation of dynamic channels:
alter database datafile '/u04/oradata/ORCL/users01.dbf' 10g resizing
1 and 4-> start and end of the string alter database datafile '
3 > literal single quote of string in red in the example output
2 > escape 3 (single literal quote of string)
5 and 8-> start and end of the string ' resize 10 g
6-> escape 7 (single literal quote of string)
7 > literal single quote of string in green in the example output
My asssumptions are correct?
I would like to write like this.
declare v_sql varchar2(350); begin for rec in (select file_name from x) loop v_sql := q'[alter database datafile '#FILENAME#' resize 10g]'; v_sql := replace(v_sql, '#FILENAME#', rec.file_name); --- EXECUTE IMMEDIATE v_sql; dbms_output.put_line ( v_sql); end loop; end; /
-
I often struggle to create single quotes in Indesign :-(
I often struggle to create single quotes in Indesign, I think that it is something simple that a pressing need to set, see attached, someone can advise?
It is not a police problem.
Form of apostrophe in InDesign is related to the language applied to your text - and quite rightly, because each language has its own preferences for quotation mark and apostrophe characters.
It really seems that you type English, and yet you said InDesign that this text is in French.
Maybe you are looking for
-
I want to use the toolbar bookmarks for a large number of bookmarks. Since the update to FF36, I have a multitude of yellow squares (folder icons that mean nothing) before the name of the folder that I made. By clicking on "Customize" does not help.
-
Re: NB200-110 can not boot - black screen
Hi all! I have a toshiba nb200-110 semi-bricked: can I power on it, I can surf via the bios, I can pass any setting but I can't start! Indeed, after the bios, I have black screen.If I try to go to the boot menu (f12) I always black screen! What can I
-
Question about the battery of the iPhone 5 s
I left my iPhone off 5S for nearly a year to 0% of battery. This may cause problems to the battery? If I turn on the iPhone even once will it work?
-
How to connect deskjet 3050 a network without a computer, just an ipad
How can I connect to jet 3050 Office to my network, I have only an IPad
-
HP 410a all in a software installation fails?
I have a HP Photosmart Premium C410a and when you try to install the software on my Acer i3 computer based portable 64-bit Windows 7, it fails? The process seems to start OK, guests of the installer for the installation location, to ensure that you a