Re: NB200-110 can not boot - black screen

Similar Questions

• Pavilion g6 can not boot black screen of death...

  Hello

  I have a g6 2240-CA Pavilion which will not start upward.  I get the 'HP' symbol and a message about 'Prepare auto repair'... then it goes in the black screen of death.

  It runs Windows 8 (pretty sure its 64-bit version), System ID 1849 and ST9500325AS ATA Hard Drive.

  I ran to the verification of diagnosis for the (vast) memory and hard drive.  The memory test the HD failed.  Specifically the "HD SMART Check" success and failure "HD short DST Check" with the following details:

  Failure ID: Q4M8GW-6HV71A-MFPWW1-60WV03

  Product ID: C2N57UA #ABL

  Let me know if you need more info... Alan

  Hello

  According to test results, you posted, and it does not point to hard drive failure. Is your older machine for less than 12 months?

  In this cases aged under 12 months contact HP in your local area and organize a repair service.

  Checkurtech

• Windows Vista does not boot, black screen after "windows loading files...". »

  I have a laptop HP Pavilion dv2000, it came with windows vista, so I don't have a boot disk. When I try to start it, it will say "windows loading files...". "with a bar, once the bar is loaded it will say microsoft Corp. (with the copyright symbol) and another bar with a bar made up of three small bars of loading through it, once that is done, it will show a black screen. I have installed recent updates and I can't access the restore mode or security system.

  Hello

  The possible fix is the same that you can not boot the system currently.

  You need to make a computer repair/restore on another disc, borrow a friends Windows disk.
  or buy one from the manufacturer of the system. See the methods in BOLD above which also shows how
  a repair/recovery disk which is bootable.

  It may not be repairable by a user and the help of a real store of the computer (no leeks and peaks at)
  a BestBuy or other BigBox stores) or Support from HP is required.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• CQ61-312SA: Presario CQ61 does not boot, black screen.

  In setting in motion:

  • LEDs LED power supply front and button cases NIP
  • Wireless LED lights
  • Above the touchpad LED lights continuously
  • LEDS near caps lock and above paved digital flash streaming
  • No sign of drive activity, no fan noise, the screen remains black.

  Looks like it is not booting in the BIOS.

  However, I tried:

  • Remove the battery, button to power down etc.
  • Remove each RAM module and Exchange.
  • Remove the HARD drive

  NB symptoms are the same when the power supply plugged in or not.

  I believe that the flashing LEDs are important but I the only references I can find are telling me to contact the HP Support.

  Can anyone tell if this is likely to be a failure of a repairable component.

  I was hoping to identify the component that prevents the laptop to even start the BIOS but I guess I'll have to just it's bin.

• Rise Of Nations Gold does not boot, black screen with pointer, using Vista

  		System model
  Windows Vista Business Service Pack 2 (build 6002) Install language: English (United States) Local system: English (United States)		No details available
  Processor		Main circuit
  2.20 gigahertz AMD Athlon 64 hides the central memory of 128 kilobytes cache 512 KB secondary memory 64-bit ready Not hyper-thread		Map: ASUSTeK Computer Inc. A8V - VM SE Rev 1. XX The bus clock: 200 MHz BIOS: American Megatrends Inc. 0201 20/11/2006
  Readers		Memory modules
  200.05 capacity disk hard usable GB 47.02 gigabytes of free disk space SJK SLUF41Y7 SCSI CdRom Device [CD-ROM drive] SONY DVD RW AW - G170A ATA Device [CD-ROM drive] WDC WD2000JS-00SGB0 [hard drive] (200,05 GB) - drive 0, s/n WD-WCANY2081150, rev 20.06C03, SMART location: healthy		1 024 megabytes usable installed memory Slot 'DIMM0' has 512 MB Slot 'DIMM1' has 512 MB Display Channel [Controller] (4 x) VIA Bus Master IDE Controller - 0571 VIA Serial ATA Controller - 0591   NVIDIA GeForce 6800 [graphics card] DELL M782 [Monitor] (15.7 "screws, s/n 8G157226B65B, February 2002)

  When I try to play Rise of Nations Gold, it shows the logo Big Games Huige, then a black screen with a cursor and then stops.  The above is my system stats

  Problem is solved: for anyone else having this problem, apparently, the solution is to wait about * 40 MINUTES * and then you will get a title screen and play the game.

  No music, screen title or is it possible that the game is loading...

  Thanks for the help so :)

• Tecra S1 - does not boot, black screen

  When I turn on my Tecra S1, fan starts, dvd starts up but screen stays black and hd light does not illuminate. If I press F8 or F12, or sometimes even if I do not support what it is, I've heard three beeps. I disconnected the battery, HD and RAM, but it seems that the same thing.

  What can I do to detect and debug the problem? Thank you

  Hey Buddy,

  I found and interesting article on the Web from Toshiba site:
  [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

  Overall this beep code means that a hardware malfunction has been detected. An ASP in your country can tell you what the problem is.

• Operating system not boot, black screen!

  HP MINI 110-3700 laptop

  Windows 7 Starter Edition OS

  After you have installed a firewall application, the CPU went to 100% usage and before I could uninstall it, the system froze. When I rebooted, the power came (I could hear the fan) but nothing came. He finally started with F9, but quickly froze. Now

  He even of powers on with the fan turns but Starter not at all with any F key.

  I tried to create a bootable usb drive, but I can't access the bios.  Any suggestions?

  PROBLEM SOLVED!

  Thanks to another suggestion, I disconnected all energy sources (and removed the battery), then I turned on the laptop for 30 seconds.  Then, I connected the power adapter and turned on the laptop. It worked, however, the system was still frozen.

  I then went safe mode and did a system restored.  Kudos to the person who helped me!

• Dell Latitude 10 ST2e compressed can not boot from an external USB optical drive

  Dell Latitude 10 ST2e compressed can not boot from an external optical drive USB (CD/DVD)

  The BIOS has no setting for it. It will boot from a flash drive. I would like to boot from my CD of 2013 Acronis Recovery Console.  Anyone have any success to boot from a CD/DVD USB drive?

  Yes, there is a way to do this.

  I just did this to install Windows 10 from a DVD on a tablet of 10 Latitude by following these steps:
  (Note: my version of BIOS is A08)

  1. turn off the 10 latitude power.
  2. attach a USB hub to the USB slot unique on the side of the tablet.
  3. fix a keyboard and an external USB CD drive to the USB hub.
  4. now press the button down on the side of the Tablet and simultaneously press the power button for 5 seconds (until see you the screen light up, but will be weak against black unlit).
  5. When you see the Dell logo, start typing on the F12 key (the lower right corner shows the option press the F12 key to choose single startup options)
  6. now start choosing appear with many options to choose from, including my CD/DVD drive.

  Hope it will be useful to you.

• my XP is not booting (white screen) and crashes at isapnp.sys then in safe mode.

  My XP Home Edition is not booting (white screen) and crashes at isapnp.sys then in safe mode. Please help as soon as possible because I need this platform for school!

  What is your system brand and model?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  The symptom often means that your system is of a malicious software.

  With this particular symptom of hanging on isapnp.sys in Mode safe is to search for a driver of zero-byte length file in the c:\windows\system32\drivers folder.

  Of course, you have to boot the system on something in order to access the hard drive to find the suspicious file and get rid of it.

  If you have any installation CD bootable XP real where you start in the XP Recovery Console, or you are not sure what type of bootable CD, you have,
  make a CD of bootable XP Recovery Console or Hiren Boot CD and don't forget.

  There is no XP media needed to make a Hiren Boot CD or a bootable XP Recovery Console.  You can access the folder and check if
  There is this action suspect file and take.

  Once you're booted to the CD of your choice, navigate to the following folder (assuming that XP is installed on your C volume):

  c:\Windows\System32\Drivers

  Looking for a file that ends with an extension .sys and zero bytes in length.  The file can also have a curious name because she may have been generated at random.

  If you are in the XP Recovery Console, issue the following command in the c:\windows\system32\drivers folder:

  dir *.sys

  Files Scrolls one screen at a time.  Look at the list of files with .sys extensions and their lengths.  You don't need to
  worry about directories...  If you see a file with a .sys extension which is zero byte, it is suspect.

  If you use just the Mini XP Mode a Hiren boot CD (which works as Office XP), navigate to the folder of the my
  Computer desktop icon and locates the suspect files.

  You really want to remove the suspicious file once you get running and you run some scans for malware, but if you are
  not sure what is the suspicious file or if it might be necessary, just rename the suspicious file for now, in case you are not sure.

  For example, if you find zigxrtml.sys folder had a length of zero byte, rename it:

  Rename zigxrtml.sys zigxrtml.bad

  Renaming or removing the suspicious file to get the system running is not resolved the problem.  It is the symptom of the problem.

  The problem is your system is infected by malicious software and you should always follow up with a few scans to remove infections.

  Once your system is running, followed with MBAM and SAS to be sure that the affliction has really been removed.

  Reduce the risk of malware by running some scans.

  Download, install, update and do a full scan with these free malware detection programs can solve any problems:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  It can be uninstalled later if you wish.

  The scans by operating clean, restart, test your task manager and we can repair any other pending issues.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• can not boot vista, 0xc0000428 error code, help!

  Says Boot Manager: file: \Windows\system32\winload.exe

  Status: 0xc0000428

  Info: Windows cannot verify the digital signature for this file.

  can not boot in any mode; memory check indicates OK; the installer showed no error I could recognize. Thank you

  Hello

  a link below how to download and do a vista Startup Repair disk that you then start from

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• Can not do a screen shot using the command shift 4. Unable to capture the States. I restart the Mac.

  Can not do a screen shot using the command shift 4. Unable to capture the States. I restart the Mac.

  It is to capture a piece of the element you want to screenshot, make a fire using full-screen control + 3

• computer does not boot, blue screen with the message: Stop: 0 x 00000024 (0 x 00190203, 0 X 86949258, 0xC0000102, 0x00000000)

  computer does not boot, blue screen with the message: Stop: 0 x 00000024 (0 x 00190203, 0 X 86949258, 0xC0000102, 0x00000000)

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Start the computer by using the Microsoft Windows XP recovery console, and then perform a check disk on the file system.

  To do this, follow these steps:

  1. Insert the Windows XP CD in the CD-ROM or DVD - ROM drive, and then restart the computer. Select the required options to start the computer from the CD-ROM or DVD - ROM drive if you are prompted to do so.
  2. once the Welcome to Setup screen appears, press R to start the Recovery Console.
  3. If your computer is configured to dual-boot or multiple boot, select the appropriate installation of Windows XP.
  4. When you are prompted to do so, type the administrator password and press ENTER. NOTE: In Windows XP Home Edition, the administrator password is blank by default.
  5. at the command prompt, type the following command and press ENTER: cd system32
  6. type the following command and press ENTER: chkdsk /r /p
  7. remove the Windows XP CD in the disc drive.
  8. Type exit to restart your computer.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

• Reinstall vista again HARD drive now PC don't can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop

  Duplicate info wire - running kill disk, vista disappeared and my laptop does not see my dvd/cd drive and I can't reinstall vista OS because of this problem

  Have to reinstall vista on a new HARD drive now PC can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop?

  The DVD player worked before HARD drive went bad now, it won't work.

  And I just replaced the HARD drive, but now cannot load an operating system that he...

  Help, please...

  Hi dynamitenews

   

  1. are you able to boot to the desktop?
  2. what happens when you try to start the computer?

   

  You must have the DVD drive to start the computer using the disk, you cannot use the external hard drive to do the same thing.

  Also I suggest you to make sure you have defined the start as CD/DVD-Rom as the first choice option in the BIOS. See below the help link-
  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  If nothing is done, then you can contact the manufacturer support for assistance on setting up the correct boot sequence and check.
  
  BIOS WARNING-
  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

   

  I hope this helps.

• HP Pavilion 15 t-n200: sometimes not found black screen boot device

  Computer during the race will go sometimes to black screen and say "boot device not found", I am able to

  correct the problem by power off, wait a few seconds back, computer power will start

  Save as normal and work very well.  This happens maybe once a week. My fear is of course to some

  time not to come back to the top. Are there corrective measures, should I try now? I have a hybrid

  static hard drive (ST500LM000-1EJ162)...

  .

  Hello @jla11,

  Thank you for visiting the HP Forums! The Forums are a great place where you can find solutions for your problems, with the help of the community!

  I understand that you have a problem with the laptop to a black screen and tried to help you!  I see that you will get the error on the hard disk.

  You might try to test the hard drive for the failure.  In this way, you can check if there are problems.  You can use the following to help:

  Laptops HP - device not found Boot error or hard drive not detected

  You should be able to skip to step 2.  Please post back with the results.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Desktop computer do not start; black screen; keyboard does not.

  Ok.  I turned on my desktop computer tonight and all I get is a black screen.  Keyboard does not work either.  Has gone through all the troubleshooting suggestions that I could find online (using my laptop), but nothing works.  I think maybe an automatic update Windows could be the problem.  You have any tips for me on what to try next?

  Hi aljbad1,

  Welcome to Windows Vista answers Forums!

  I would like to ask you a few questions in order to get a better understanding of this issue so that we can better help you.

  (a) what version of Vista are you using?

  (c) do you receive an error message when you start the system?

  Method 1: You can try to start safe mode and see whethyou can follow the below given steps:

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click the Start button, click the arrow next to the button lock and then click on restart.

  2. do one of the following:

  a. If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  b. If your computer has multiple operating systems, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  3. Select safe mode and press enter

  Method 2: If you are able to start in safe mode, then you can try to perform a system restore and check if it works very well.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next

  4. click on finish

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  For more information, please follow the below given link:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212/

  Method 3: you can perform a Startup Repair on your computer using your Vista DVD:

  We will have to perform the Startup Repair, boot from the Vista DVD and get RE Win and choose Startup Repair from the menu.

  1. Insert the installation disc.

  2. restart your computer.

  3. If you are prompted, press any key to start Windows from the installation disc.  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  4. choose your language settings, and then click Next.

  5. click on repair your computer.

  6. Select the operating system you want to repair, and then click Next.

  7. in the System Recovery Options menu, click Startup Repair.

  8. once the Startup Repair tool is completed, restart your computer and check if it works very well.

  Method 4: you can also try a system restore using Vista DVD and check if it works very well.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Insert the installation disc.

  2. restart your computer.

  3. If you are prompted, press any key to start Windows from the installation disc.  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  4. choose your language settings, and then click Next.

  5. click on repair your computer.

  6. Select the operating system you want to repair, and then click Next.

  7. in the System Recovery Options menu, click System Restore.

  8. in the System Restore dialog box, click on choose a different restore pointand then click Next.

  9. in the list of restore points, click a restore point that was created before you began to meet the problem, then Next.

  10. click on Finish

  Note: when you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  For more information, please visit the below given link:

  Repairs to the system of Windows recovery environment

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out

  Hope this information is useful.
  Let me know if it worked.

  Concerning
  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.