Single Sign on authentication failed with error [user: username is found, but]
HelloURGENT:
One user is trying to connect to Essbase by Excle worksheet. To connect in Essbase, this user who connects to the network using the VPN connection. I suspect that this question arises because of an invalid password, but the user claiming that password is correct. When I checked the user information in Essabase, he gave an external authentication that is valid.
Please help me on this issue. What should go wrong with this user?
* Single Sign on authentication failed with error [user: username found, but could not authenticate] *.
Thanks again for your help.
Kind regards
UB.
If essbase uses an external authentication as MSAD, you can get the password changed at the level of the AD by someone who takes care of the administration.
See you soon
John
http://John-Goodwin.blogspot.com/
Tags: Business Intelligence
Similar Questions
-
LoadPanel fails with error-94 file not found code unless I am in debug mode
I've written a dll that has a number of panels in a .uir file.
When I have it, debug using "debug SeqEdit.exe", everything works fine.
But, if I just use "run SeqEdit.exe" (without debugging and using the same sequence file, I get the error message:)
"Error in the call to LoadPanel.
Handle of parent of Panel: 0,
The IUR filename: HiPot.uir.
Resource Panel ID: 4.
Error code:-94
File not found. "
The IUR file is always in the same place, the only difference is that I do not use the debug option.
It's probably something simple I've forgotten?
You should not use LoadPanelEx in this case?
-
Windows Update fails with error [error number: 0x800A0007]-which is not listed
Windows update fails with error [error number: 0x800A0007]-which is not listed, so unable to update the system
The other post:
Thank you for your reply - but the problem persists - this is mopre complete info.
The system starts well and runs - BUT I cannot now be updated because when I access "Windows Update" it always returns this error message.
Also, none of the messages in your "appliesto" step 2 recommended link will be applied effectively.
As far as I know - we have a standard system and I just ran again ONCE a full system virus etc check - all clean.
Also your "Mr Fixit" was performed several times, but nothing changes.
Because it enters the update process, and then always closes with this specific message (which as I said is NOT in your list of error messages), which SHOULD tell your software writers where is the problem.
This is what is happening in the process of updating before it fails:
Keep your computer up-to-date
Check to see if you need updates for Windows, your programs, your hardware or your devices.Get updates of high priority (recommended) Select among the priority and optional updates for Windows and other programs
... and it does not matter if I say "express" or "custom" - headed then:
Checking for updates for your computer...but fails after a few seconds with the same message as follows:[Error number: 0x800A0007]The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. -However, it is the State of the system for more complete information for you:
Name of the operating system Microsoft Windows XP Home Edition
Version 5.1.2600 Service Pack 3 Build 2600
Manufacturer of operating system Microsoft Corporation
MISCHU06BLUE system name
System manufacturer Compaq Presario 061
ED865AA - ABA SR1610NX NA540 system model
System Type X 86-based PC
Processor x 86 family 15 model 47 Stepping 2 AuthenticAMD ~ 1790 Mhz
Version/Date BIOS Phoenix Technologies, LTD 3.33, 17/08/2005
SMBIOS Version 2.4
Windows C:\WINDOWS directory
System directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume2
The local United States
Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
MISCHU06BLUE\Compaq_Owner user name
Time zone Pacific Daylight Time
Total physical memory 1 024,00 MB
Available physical memory 468,50 MB
Total virtual memory 2.00 GB
Available virtual memory 1.96 GB
Page file space 1.51 GB
Paging file C:\pagefile.sysPlease get us some help to solve this problem.
What else can I provide?I didn't ask if it was a new issue or a new problem, I asked if she was the same computer?
[This applies to your recent 'me, too' answer to another thread.]
-
Original title: svchost (1020)
Event type: error
Event source: ESENT
Event category: general
Event ID: 490
Date: 2010-10-19
Time: 14:51:34
User: n/a
Computer: ROB
Description:
Svchost (1020) an attempt to open the file "C:\WINDOWS\system32\CatRoot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb" for read / write access failed with the error System 32 (0x00000020): "the process cannot access the file because it is being used by another process.". The operation to open the file will fail with error - 1032 (0xfffffbf8(JET_errFileAccessDenied)).For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Hi Robrw,
1. when exactly you receive this error?
2. don't you make changes to the computer before this problem?
You can try to rename the catroot2 folder and check if it helps.
Step 1:
a. Click Start and in run type C:\windows\system32 and click ok
b. find the Catroot2 folder. Right-click on Catroot2 and rename it to Catroot2.old
If you are not able to do the normal mode, try to start in safe mode and rename
Check out the link for more information on starting your computer in SafeMode below:
http://support.Microsoft.com/kb/315222
Step 2:
If you are unable to access the catroot2 folder, and then try to change the permissions on the files and check if it helps.
See the following article:
How to capture a file or a folder in Windows XP
http://support.Microsoft.com/kb/308421
Step 3:
You can also try to temporarily disable third-party security software and firewalls and check what is happening.
Note: Activate the security software after the resolution of the problem.
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
I've been struggling for weeks to try to get my computer Windows 7 update to Windows 8.1. It is not interesting to go in full history frustrating because I gave the update and now I just try to start over again. The recent measures and current situation is as follows:
1 PC is powerful enough with i7 and 16 GB chip.
2. new SSD this week.
2. freshly downloaded Windows 8 Pro ISO burned to a DVD and checked.
3 Ran install successfully and signed using my Microsoft Account.
4 tried Windows Store for Windows 8.1, but said I need updates.
4 Ran Windows Update in Control Panel.
5. Windows update found 127 updates and they failed with error code 80248007.
I don't understand how I can get these failures with a new facility.
Any help will be greatly appreciated. Thank you all in advance!
Hello
Glad you got it going... If I had to guess, it was very likely updates .net 3.5, which has caused the problem... or maybe, Net 4.5...
They require a process runs to complete their installation that seems to start running in the middle of updates remaining to try to install...
-
IMP-00017: statement failed with error ORACLE 1658:
# imp system/pass fromuser = touser = file=/disk1/Downloads/dmp/MI61015.dmp databaseName databaseName
Import: Release 11.2.0.2.0 - Production on Sat Oct 10 09:29:32 2015
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11 g Express Edition Release 11.2.0.2.0 - 64 bit Production
Export file created by EXPORT: V11.02.00 by conventional means
import performed AL32UTF8 and AL16UTF16 NCHAR character set
Customer export uses the (possible character set conversion) US7ASCII character set
. imported objects from databaseName databaseName
. . import of table 'ACCOUNTS' 12 rows imported
. . table import 'AGREEMENTS' 6 imported lines
. . importing table "ASSIGNEDDEPT" 0 rows imported
. . import of 2713 lines imported from the table 'BULKSAVEDCVS '.
. . import of table "CERTIFICATION" 7 lines imported
. . importing table "COMMONDOCS" 0 rows imported
. . table import 'COUNTRY' 256 imported lines
. . importing table "CVCATEGORIES" 6 imported lines
. . table 'CVCERTIFICATION' import 92 lines imported
. . importing table "CVCHECKAGAIN" 56 imported lines
. . importing table "CVDETAILS".
IMP-00058: ORACLE error 1653
ORA-01653: unable to extend table databaseName.CVDETAILS 8192 in the SYSTEM tablespace
IMP-00028: partial import of the restored previous table: 20960 restored lines
. . table 'CVLICENSE' import 756 lines imported
. . importing table "CVPROPERTIES" 69752 imported lines
. . rows in table 'CVSPECIALTY' import imported 6159
. . import of 1701 lines imported from the table 'CVVIEWS '.
. . "DEPT" table import 2 lines imported
IMP-00017: statement failed with error ORACLE 1658:
' CREATE TABLE 'DETAILRESUME' ("D_ID" (14: 0), THE NUMBER OF 'CV_ID' (14: 0), "").
"NUMBER OF 'CAT_ID' (14: 0), 'DETAILRESUME' CLOB) INITRANS PCTUSED 40 PCTFREE 10.
1 MAXTRANS 255' STORAGE ' (INITIALS 67108864 THEN 1048576 MINEXTENTS 1 FREELIST).
"S 1 FREELIST GROUPS 1 DEFAULT USER_TABLES) TABLESPACE 'SYSTEM' LOGGING NOCO.
"COMPRESS LOB ("DETAILRESUME") AS STORE BASICFILE (TABLESPACE 'SYSTEM' ENABLE '.
"CHUNK 8192 PCTVERSION 10 NOCACHE LOGGING STORAGE (INITIAL 6" ONLINE STORAGE ".
"THE NEXT 5536 1048576 MINEXTENTS 1 FREELISTS 1 FREELIST GROUPS 1 USER_TABLES OF."
"FAULT)).
IMP-00003: ORACLE error 1658
ORA-01658: unable to create the INITIAL extent for segment in tablespace SYSTEM
. . importing table "DOCCATEGORIES" 0 rows imported
. . table 'EMPLOYERORAGENT' import 62 lines imported
. . table 'FAQ' import 4 lines imported
. . importing table "FOLDERCVS" 6 imported lines
. . table import 'FOLDERS' 3 imported lines
. . "JOBDETAILS" table import 84 lines imported
. . table 'JOBKEYWORDS' import 190 lines imported
. . table 'JOBPOSTINGS' import 84 lines imported
. . import of table 'JOBPROPERTIES' 89 imported lines
. . table 'JOBRESPONSES' import 64019 lines imported
. . table import "LICENSE" 20 imported lines
. . import of table 'MESSAGES' 0 rows imported
. . table import 'NEWS' 0 rows imported
. . table import "SPECIALTY" 301 lines imported
. . table import "STAFF" 12 rows imported
. . table import 'TICKET' 0 rows imported
. . importing table "TICKETCATEGORY" 0 rows imported
. . importing table "TICKETTEMPLATES" 0 rows imported
. . import of rows in table 'USERS' 4410 imported
About to activate the constraints...
Import completed successfully with warnings.
#
Please advise.
Thank you in anticipation
Christy H. wrote:
How can I increase its space?
That drive you some people to knowledge, but you can't make them think.
-
CPU12.1.0.2.3 opatchauto failed with error code 255.
I want to install the 12.1.0.2.3 critical update (April 15, 2015) for the independent network on Linux Infrastructure. It fails with the error code of subject and the following additional messages:.
The user is root. OPatch cannot continue if the user is root.
opatchauto failed with error code 255.
These instructions specifically tell me to log in as root before installing the patch, so what happens?
The instructions show all first update OPatch later, that I've done and checked.
Secondly, a CMO response file is required, so I followed the steps to create this file and saved as /home/grid/ocm.rsp with the 644 default permissions.
Third, the instructions say to download the patch and unzip it in an empty slot that can not be/tmp. I created a new/home/grid/foo directory and unpacked the software to this location. Thus, the location of chilling is/home/grid/foo/and in this directory are only two things: a file named PatchSearch.xml and a directory named 20485724.
Fourth, the readme indicates the patch must be installed by a user with root privileges, so I logged as root. (Oracle ) Note 1591616.1 said to connect as root, not only be as root).
As root I set environment variable for ORACLE_HOME pointing to the home of GI, and I set PATH = $PATH: $ORACLE_HOME/bin: $ORACLE_HOME/OPatch.
Finally, I call opatchauto with the required parameters and get an error saying I can't be root. I fussed with the parameters and the result is always that I can not be root.
Documentation,.
Case 3: Patch only IG home
You must use the following instructions if you prefer at patch Oracle GI (grid Infrastructure) only with this patch.
Case 3.1: Welcome IG no shared
If IM home is not shared, then use the following instructions to patch the House.
3.1.1 case: ACFS file system is not configured
Follow these instructions in this section if IM home is not shared and none of the Oracle database houses using the filesystem ACFS to its software files.
Do the following on each node in the cluster.
As user root, run:
# opatchauto apply <UNZIPPED_PATCH_LOCATION>/%BUGNO% -oh <GI_HOME> -ocmrf <ocm response file>
My order is,
opatchauto applies/home/grid/foo/20485724-oh /u01/app/12.1.0.2/grid - ocmrf /home/grid/ocm.rsp
So, not a problem of syntax. It simply doesn't let me run as root despite this being a difficult requirement.
The problem was due to a 32-bit version of OPatch installed on our Linux 64-bit server. After we installed the correct OPatch the error disappeared.
The shift occurred because the OPatch link download in the Readme for the edition of 6 bits points to a 32-bit version of the download OPatch PSU and CPU patches. Not sure why a readme for 64-bit software made us in a 32-bit download file, but we know now to double check everything.
-
Backup failed with error 18: the backup drive is not found
Hello
My guard time capsule saying "Backup failed" for a few days and I cannot access the old backup files either (when I enter my time machine it shows 'today', which is kind of scary, although I know that my old files is still there). I tried many ways to trouble shoot this problem, but none of this has worked. In my opinion, it's more a network problem and I made sure I connect Wi - Fi even my time capsule created.
So far I have tried:
-Delete the files from my internet (com.apple.airport.preferences.plist; preferences.plist and NetworkInterfaces.plist, etc.) and restart my mac
-Remove TimeMachine.plist and restart my mac
-Hard reset of my time capsule. Went through all configurations with success but then still backup missed (I hear the running time capsule when it is by train).
I share this time capsule with my wife and she has no problem with that.
I can only think of a possible alternation I did which could cause this problem.
Because of unstable WiFi problem, I had deleted
com Apple.Airport.Preferences.plist
com.Apple.Network.identification.plist
NetworkInterfaces.plist
Preferences.plist
or other files and reboot my mac * before * I had this problem with time capsule.
However, this is not the first time I do it, and it wasn't a problem before...
This could be the reason? If so, how to restore the network settings?
Please help me with this problem. Really appreciate!
Ted
Here is a copy of the Console:
24/02/16 2:44:19.308 AM com.apple.backupd [857]: from manual backup
24/02/16 2:44:19.309 AM com.apple.backupd [857]: Destination Time machine could not be found (url: destinationID (null): AB78050D-4852-489D-9CBF-88727FBC8047)
24/02/16 2:44:19.313 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.
24/02/16 2:44:35.326 AM com.apple.backupd [857]: NAConnectToServerSync failed with the error: 64 (host is out of service) for url: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data
24/02/16 2:45:29.976 AM com.apple.backupd [857]: attempt to mount the destination network URL: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data
24/02/16 2:45:29.976 AM com.apple.backupd [857]: error - 35 during the resolution of the backup destination alias
24/02/16 2:45:29.976 AM com.apple.backupd [857]: attempt to mount the destination network URL: afp://Ted%20Ling@TJ's%20AirPort%20Time%20Capsule._afpovertcp._tcp.local./Data
24/02/16 2:45:30.668 AM com.apple.backupd [857]: destination network mounted at the mounting point: / Volumes/data using URL: afp://Ted%20Ling@TJ's%20AirPort%20Time%20Capsule._afpovertcp._tcp.local./Data
24/02/16 2:45:50.428 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)
24/02/16 2:45:50.428 AM com.apple.backupd [857]: wait 60 seconds and try again.
24/02/16 2:45:59.981 AM com.apple.backupd [857]: NAConnectToServerSync failed with the error: 64 (host is out of service) for url: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data
24/02/16 2:46:42.807 AM com.apple.backupd [857]: Timed out while solving Hello destination: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data
24/02/16 2:46:42.812 AM com.apple.backupd [857]: from manual backup
24/02/16 2:46:42.814 AM com.apple.backupd [857]: the airport of Destination Flymi Time Capsule could not be found (url: afp://Ted%20Ling;) AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. (/ data destinationID: B2187361-58BC-4D33-A7AC-1DDC429ABF3B)
24/02/16 2:46:42.825 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.
24/02/16 2:46:42.833 AM com.apple.backupd [857]: from manual backup
24/02/16 2:46:50.544 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data
24/02/16 2:46:50.604 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data
24/02/16 2:47:16.683 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)
24/02/16 2:47:16.683 AM com.apple.backupd [857]: wait 60 seconds and try again.
24/02/16 2:48:20.566 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data
24/02/16 2:48:44.360 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)
24/02/16 2:48:44.360 AM com.apple.backupd [857]: wait 60 seconds and try again.
24/02/16 2:49:48.014 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data
24/02/16 2:50:11.885 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)
24/02/16 2:50:11.885 AM com.apple.backupd [857]: give up after 3 attempts.
24/02/16 2:50:11.903 AM com.apple.backupd [857]: backup failed with error 21:21
24/02/16 2:50:27.245 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)
24/02/16 2:50:27.250 AM com.apple.backupd [857]: from manual backup
24/02/16 2:50:27.250 AM com.apple.backupd [857]: Destination Time machine could not be found (url: destinationID (null): AB78050D-4852-489D-9CBF-88727FBC8047)
24/02/16 2:50:27.257 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.
24/02/16 2:52:28.390 AM SystemUIServer [265]: try using XPC with a MachService which has the value HideUntilCheckIn. This will result in unpredictable behavior: com.apple.backupd.status.xpc
24/02/16 2:52:28.390 AM com.apple.prefs.backup.remoteservice [866]: try using XPC with a MachService which has the value HideUntilCheckIn. This will result in unpredictable behavior: com.apple.backupd.status.xpc
What model is the TC?
Try to force the connection to 2.4 ghz using different names for the various bands... or even better to use ethernet.
(You may need to buy love at first sight for adapter Ethernet... is an investment worth considering how unreliable wireless).
Also give me some screenshots of the TC installing airport utility.
Can you get it in the Finder?
-
Update for Microsoft XML Core Services 4.0 Service Pack 2 for x 64 systems (KB973688). UPDATE FAILS WITH ERROR 652, ENCOUNTERED AN UNKNOWN ERROR.
Download size: 5.4 MB
Update type: Important
Jim,
Take a look at this article and see if applies: Mike KB971187 - engineer Microsoft Support responses
Visit our Microsoft answers feedback Forum and let us know what you think. -
Windows 2008 SP2 installation failed with error code 0 x 80041002
Hello
I have a Windows 2008 x 86 with Service Pack 1 installed. I tried to install Service Pack 2, but failed with error code 0 x 8004102.
I tried the steps in http://support.microsoft.com/kb/947366:
1 uninstalled antivirus.
2. install KB947821 analysis tool
3. downloaded and run the standalone version http://www.microsoft.com/downloads/en/details.aspx?FamilyID=a4dd31d5-f907-4406-9012-a5c3199ea2b3&displaylang=en
Without success. What should he do next?
Thank you
Frank
Hi Frank_673,
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited to the audience on windows server. Please post your question in the forum.
Link:http://social.technet.microsoft.com/Forums/en-US/category/windowsserver
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Update of security for sql server sp3 KB94981 fails with error 2B 33
Each update for SQL Server 2005 on my computer Vista Home Premuim fails. The most recent example is:
Update of security for sql server sp3 KB94981 fails with error 2B 33
for SP2, it was
Security for sql server sp2 KB960089 update fails with error 6AA
Other updates have been ad are successful, although I found out recently that it is the recovery disc option to create under maintenance contract. I fdound the recdisk.exe file, but running it does nothing.
Mike
Maybe check this forum:
SQL Installation of Server & upgrade
http://social.msdn.Microsoft.com/forums/en-us/sqlsetupandupgrade/threads/TaurArian [MVP] 2005-2010 - Update Services
-
Vista SP2 x 64 install failed with error 80004005
I tried to install the SP2 for Vista X 64 (KB948465) four times. The most recent installation attempt failed after
(1) created a new administrator account and did the following...
(2) uninstalled CA Antivirus Suite (no other antivirus installed).
(3) stop the Windows Update service, renamed %windir%\SoftwareDistribution for... \SoftwareDistributionOld, restarted update service, restarted.
(4) installed and run CheckSur (can provide the journal).
(5) restarted in clean boot mode.
6) attempted to reinstall SP2.In all attempts, installation seems to be completed, during the restart of the installation of all 3 full updates to 100%. However, the message then States that the installation failed and the original configuration was recovering.
I have a new a6700f desktop HP Pavillion, AMD Phenom X 4 9150e Quad Core clocked at 1.8 GHz, 4 GB RAM, 500 GB HARD drive; Windows Vista Edition Home Premium x 64 SP1, nVidia Quadro FX 370 video card.
Service pack Windows Vista and Windows Server 2008 install fails with error 0x80004005
http://support.Microsoft.com/kb/971204 TaurArian [MVP] 2005-2010 - Update Services -
KB898461 repeatedly fails with error code 0x80070005 - what can I do about it?
KB898461 repeatedly fails with error code 0x80070005 - what can I do about it?
KB898461 repeatedly fails with error code 0x80070005 - what can I do about it?
Run the automatic fix here and try again once the update manually by downloading it from HERE
-
I have DSL and a wireless printer that work well when the system starts; EXCEPT the desktop icons disappeared so I can't manage them! If I stop DSL through the system icons, I get the following error messages when I try to restart or to solve problems: do you know what are the services that I need to install/reboot?
Diagnosis of network adapter
Network location detection Info Using the Internet connection at home Identification of network adapter
error Failed with error 0 x 80070424: the specified service does not exist as an installed service. HTTP, HTTPS, FTP Diagnostic
HTTP, HTTPS, FTP connectivity warn HTTP: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved warn HTTPS: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved warn FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved warn HTTP: Error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved warn FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved warn HTTPS: Error 12007 connecting to www.passport.net: the server name or address cannot be resolved error Could not make an HTTP connection. error Could not make an HTTPS connection. error Could not make an FTP connection. Diagnosis of last run time: 16/05/12 16:09:47
Diagnosis of network adapter
Network location detection Info Using the Internet connection at home Identification of network adapter
error Failed with error 0 x 80070424: the specified service does not exist as an installed service. HTTP, HTTPS, FTP Diagnostic
HTTP, HTTPS, FTP connectivity warn HTTP: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved warn HTTPS: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved warn FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved warn HTTP: Error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved warn HTTPS: Error 12007 connecting to www.passport.net: the server name or address cannot be resolved warn FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved error Could not make an HTTP connection. error Could not make an HTTPS connection. error Could not make an FTP connection. Thanks for your attempt to solve my problem.
Curiously he solved my problem of network while solving what has proved to be a problem with the firewall of Windows (see below): who knew?
-
KB2656353 install fails with error 0 x 643
Dear Microsoft support community,
(a) I have Windows XP Professional SP3. I haven't used this computer
in almost a year, so the first thing I did was to hang the
computer, connect to the Internet and run Microsoft update.
There were 78 updates and 75 of them were installed successfully.
(b) when I tried to install KB2656353, the installation failed with error
0 x 643.
(c) Googling turned up to http://support.microsoft.com/kb/976982 .
I tried the Microsoft Fix it 50123, but which did not help.
(d) I repaired then the .NET 4 Client Setup. No joy.
(e) I ran the auditor of .NET tool to
http://blogs.msdn.com/b/astebner/archive/2008/10/13/8999004.aspxAnd he noted "the check is successful" for
.NET 1.1 SP1
.NET 2.0 SP2
.NET 3.0 SP2
.NET 3.5 SP1
.NET 4 client
.NET 4 full(f) I have concluded that uninstall and then reinstall the whole .NET
framework was not claimed for now, since it does not seem
as indicated in KB 976982 corrupted.(g) I checked the registry for .NET 1.1 hotfixes listed issues
in http://blogs.msdn.com/b/astebner/archive/2004/11/23/268934.aspx
in the "Info 9002..." section, but I have not found any.(h) I downloaded the update in a separate file,
NDP1.1sp1 - KB2656353 - X 86 .exe, to http://download.microsoft.com,.
and tried to run as a standalone program, but it stops almost
immediately. By redirecting the logging to a local file, I find
the update has not been installed, but I do not know how to interpret
the log file, which is much too large to be able to post it here in its entirety.How can I get this update to install?
Related post on the same question:
Maybe you are looking for
-
Hello both of my printers will not communicate with my computer. One is wired and we're wireless. They were both very well a few days ago. Now, they will not print or scan. The cable it is said that the installation of the device is not over. A
-
Spilled the hot soup on my laptop: how to fix?
I pushed my laptop and hit a bowl of hot soup. Soup spewed out on the laptop (not all) and the laptop immediately cut. I made the mistake of trying to start it up right after. I have a picture that describes where he had obtained more soup to the lap
-
Google chrome older version and the problem When I clicked on Google Chrome, I got this message that Google Chrome crashed. so I can't use it. My window is Window 7 and Chrome is like version 4 (or I'm not sure) what are the possible causes and how c
-
2811: connecting two VPN l2l ASA5505
Hello We have a HQ site with a 2811 (w/ADVSECURITYK9-M) acting as the firewall. We currently have 1 ASA5505 with an established ipsec VPN l2l. I'm trying to connect a 2nd ASA, but I noticed that I only add 1 cryptomap to the external interface. A wor
-
First the metadata Panel Pro does not find in prelude?
I can't the Premiere Pro project metadata Panel to display in the window of metadata. I'm in the display of metadata settings, check the control panel and it does not appear. Return to settings I find the box unchecked. What Miss me?