Spilled the hot soup on my laptop: how to fix?
I pushed my laptop and hit a bowl of hot soup. Soup spewed out on the laptop (not all) and the laptop immediately cut. I made the mistake of trying to start it up right after. I have a picture that describes where he had obtained more soup to the laptop. I took out the battery and wiped what little liquid was inside the case of the battery and the battery itself. I tried to start it after that and it has not always worked. It should also be noted that most of the overturned soup was on the table, or in contact with the laptop. A little, but soup had got into the keyboard (as shown on the picture), but I let it dry overnight for about 14 hours now, but I'm not sure if I need to plug in the charger and try to start again.
Photos: http://imgur.com/gallery/SOh7s
Any help is appreciated. Thank you.
Hello
Thanks for posting your concern in Microsoft Community and welcome in the family of 10 Windows.
We appreciate the time and effort that you put to provide us with full information. I want to help you with more information from here.
Any spillage of liquid on cell phones may be detrimental, but it still depends on the extent of the damage. I suggest you contact the manufacturer of the laptop to ensure that there is no material damage component due to this incident.
Hope the above information is helpful. If you need help, feel free to write to us and we would be happy to help you.
Thank you.
Tags: Windows
Similar Questions
-
I understood the problem, but don't know how to fix it. It is said to run dxdiag because direct 3D, so i run dxdiag and it finishes loading, I test direct 3D and it works fine, so I re-run halo, but then it still doesn't work. so I went online for patches, but when I downloaded a patch for windows 7, but I have windows xp. so I go back to the internet and search for patches for windows xp, but there is no result. so I thought change to windowed mode halo would work but it dident work when I ran halo 3rd becose my color depth is low, I have 24-bit color quality, but I don't know how to change, so I look for a way to change this for months and no results.so to microsoft answers site please help me because I have nothing else in my mind to the difficulty of halo
I have:(1.halo of the trial(custom edition 2.halo (full)Halo is ever going to work on my computerbecause he never didI play with my cousins that I visit about 3 times a yearHello
I suggest you go through the link.
Minimum system requirements for Halo: Combat Evolved
http://support.Microsoft.com/kb/829479Please check if the computer meets the minimum system requirements to play HALO gameYou can also refer to: -
Recently my fireall cannot be activated? I tried manually put on throughout the service, no luck. Then, I checked the firewall authorization driver is absent, it is the cause of the problem that the firewall cannot be activated? How to fix?
Hi James,
Thank you for your e-mail. I solved the problem using System Restore.
-
I got this message when I installed the latest InDesign. Cannot open the application. Do you know how to fix it? "Cannot launch Adobe InDesign that you do not have sufficient permissions to access the preferences folders. Make sure that you have the appropriate permissions and then restart Adobe InDesign.
-
have a Comcast wireless connection. 2 laptop HP & Gateway, HP, leaving work wireless, must connect directly with a wire to the router, what happened? How to fix? Colleen
Hi ColleenMiller,
1. you receive messages or error codes when you connect?
2 Windows operating system you are using?
You can view the following items and see if it helps:
Windows wireless and wired network connection problems
Solve problems, find wireless networks
Hope this information is useful.
-
I have a Hp and the micro build does not work how to fix this?
Can someone help me please? I have a HP T5800 and the micro build does not work how can I solve this problem?
Hello
Check with HP, their drivers support and documentation online and ask in the forums about known issues.
Support HP & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/========
It's probably the pilots who are responsible and who may not really be later or they need to be
re-installed anyway. The best way is to manually review using the methods below.References to Vista also apply to Windows 7.
Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek High
Audio definition (this is an example and you can have an other name/maker).Write the description and the model double click on it - tab drivers - write down
Version. Now click on update drivers who cannot do anything as MS is far behind certifying
drivers. Then CLICK RIGHT on it and UNINSTALL - REBOOT - this will rebuild the driver
stack.You can have the default windows or a former certified pilot and it's all or part of the
issue.Now, go to the site of the manufacturer of the system and get the latest Audio/Sound drivers - download - SAVE - go to
where you put - right-click on Reboot - RUN AS ADMIN-Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
and then install the latest version. Restart and check after each test, not
rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
installed shows upward on the tab of the driver.
Go to the site of the manufacturer of the device, and then search for the even more recent drivers and install repeat
operating mode. Download - SAVE - go to where you put them - click on - RUN AS
ADMIN - RebootLook at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers to 7 (updated drivers manually using the methods above is)
to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html---------------------------------------------------------
After the updated driver.
Click with the right button on the speaker near clock - recorders - right click in the box - check see the
Disconnected devices and show disabled devices - check your micro - highlight
then on lower right properties. Make sure that the appropriate injector is selected and check
other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
is the RealTek Audio Manager, yours can be quite different name if you have one.How to activate Audio devices hidden in Vista
http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.htmlConnect one microphone, music player or other audio device to your computer
http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspxProblems with sound and audio or no sound - a Mr Fixit
http://support.Microsoft.com/GP/NO_SOUNDTips for solving common audio problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problemsThe volume of the audio recorded by sound recorder in Windows Vista or in Windows 7 is less than
in Windows XP (or Vista)
http://support.Microsoft.com/kb/973446I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I can't get my updates. the Windows Installer does not work how to fix it
I can't get my updates. and I can not install other programs. the Windows Installer does not work. How can I fix?
http://support.Microsoft.com/kb/2438651#reso1
See the above article, I suggest you use not Fixit, but it's your choice.
For manually fixit it you follow the steps in the resolution.
fyip
-
mouse randomly does not meet the flow, ideas on why and how to fix it?
every now and then he does not meet the movement vertically or horizontally, its becomes quite annoying and had no idea why its happens or how to fix
Check that the light under the mouse has no dirt top card, as long as your mouse pad is clean.
Try the mouse in another USB port in order to verify that you are using is not defective.
Try a different mouse is you still have a problem after doing the above to check if the mouse is defective. -
I am running Windows 10 (x 64) (build 10586) on my laptop HP ENVY TS of m7 with HP Support Assistant 8.1.40.3. I'm used to seeing the blue Support Assistant of circular background of question mark icon located on the right side of my taskbar Windows in the notification area, just to the right of the up-carat for 'display the icons '.
However, about 2 days ago the Assistant to support automatically downloaded and installed the latest version of himself. The '? ' icon disappears from the notification area of the task bar and appeared to place on my desk. I clicked on the desktop, and then click icon on "PIN to Desktop". It pinned icon Assistant decision-making support on the left side of my taskbar with icons for Windows Store File Explorer and other icons open programs.
I tried just dragging the icon Wizard help to the right of the Notification area of the taskbar, but that cannot be done. Please give me detailed instructions on how to get back the icon wizard helps to where I'm used to seeing.
Thank you for your help.
DavidPK wrote:
Hello
Another option, you may need to check is the following.
Launch of HP Support Assistant.
Click the gable of parameters to the upper right.
In the following Panel, make sure the "show an icon in the taskbar" entry (see the option highlighted in the image below) is checked - if not, click in the box enter a tick, then click on the "Save" button.
Kind regards
DP - K
Hello once again, David,
Success at last! I uninstalled HP Support Assistant and reinstalled. After the installation, I found that the wizard help icon was now right of my bar Windows 10 tasks in the notification area, where I'm used to seeing. See the image below. If this topic is now closed.
Thanks for all your suggestions and help, which helped my analysis of this problem and its possible solution.
All the best wishes and cheers,
Joel
-
I tried to update Firefox on my desktop since version 33.0 I continue to download and upgrade or install day, but nothing changes. Gmail still says the browser is not supported, and Mozilla says I use an older version and need to update. I downloaded from different places - the links provided when he said outdated sound and go directly to Mozilla.org for download. In fact, I uninstalled Firefox and tried to install instead of upgrade. It does not help. My computer says I have the latest version, but the internet plays an older version. Also my "firefox" button and another add on buttons are missing from the navigation bar, so I can't check 'about' to see what version of the browser itself says that it is running. How can I fix it? I use Firefox for years and this is the first problem I had that I can't fix.
And... your check of software I actually running version 11. Clearly, it is not up-to-date.
Your useragent is corrupt, or that you use Firefox 11.0 appears.
User Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; RV:11.0) Gecko/20100101 Firefox/11.0 WBSMTWB020https://support.Mozilla.org/en-us/KB/websites-say-Firefox-outdated-or-incompatible
https://support.Mozilla.org/en-us/KB/how-reset-default-user-agent-Firefox
-
I want to send a photo thrugh my bluetooth on my phone to my laptop but it won't let me told you just Server bluetooth stack
Hello
If it please see the following thread and follow the boot minimum troubleshooting steps listed by David Y.http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/error-unable-to-start-the-Bluetooth-stack-service/1d9aa038-2ec4-4b29-87a2-bad08cf4e49c
I hope this helps. Just reply to the results.
-
my computer hp laptop shows "Press the ESC key for startup menu" how to fix it help me?
HP pavilion g6 mobile app
product number: LN207EA #ABV
Serial number: [redacted for privacy].
Tell me please solution.Press the ESC key. In the menu choose F2 System Diagnostics. Test your hard drive & memory.
-
I was entering numbers in a chart in Pages to update the information and all of a sudden the cells do not have the formatting that I want. It's changing the way numbers which I type them, and I don't know why or what to do?
Hi Slf@LF,
Numbers and pages are trying to be smart and recognize wht kind of data that you enter. If you enter something that resembles a date they will treat it as such. Some people have problems with serial numbers because programs to format their numbers and not text.
View the data that you are trying to enter and how it's changed and we ca probably to understand what is happening to her.
Quinn
-
New date mask down arrow of scroll behind the taskbar in window mode full how to fix this?
After again until this day, the right and bottom of the if scroll bar of browser under the taskbar. I have windows 7. I checked the addons and extensions and they have made no change. The last thing that update has been the default theme.
Hello
Have you tried to maximize the window of Firefox? Hover your mouse over the button on the top middle right of the window (just to the left of the close X button). If the popup says "enlarge" click here and see if the problem goes away.
If this isn't the case, please provide a screenshot. If you need help to create a screenshot, please see How to make a screenshot of my problem?
Once you have done so, attach the file to screen shot saved to your post on the forum by clicking on the button Browse... under the box to post your reply . This will help us to visualize the problem.
Thank you!
-
The address bar on Firefox dissappeared how to fix?
I'm not quite sure, how this happened but the lines for the address bar and the search disappeared and I don't know how to get it back.
This has happened
Each time Firefox opened
is the last night
You can hide the menu bar in Firefox 3.6 on Windows, on "view > toolbars" or via the contextual right click menu on a toolbar.
Press F10 or press and hold the Alt key to bring up the menu bar temporarily.
Go to "view > toolbars", right click on the menu bar, or press Alt + V T to select to show or hide toolbars (click on an entry to switch from the State).See also what happened to the file, edit and view menus? and http://kb.mozillazine.org/Toolbar_customization
Maybe you are looking for
-
Help me I need all the drivers PC laptop hp pavilion dv6t-7000
Hi there please help me I need all the drivers PC laptop hp pavilion dv6t-7000, the product number is A3E87AAR and serial number is [redacted]
-
Satellite C855 - no sound when plugged headphones
Hi all I hope someone can help me. I had my C855 Satellite - part 2F3 no: PSCBWE-0H600NEN since April and have used my headpones in it several times and it worked fine. I used this morning and he was working then suddenly stopped, whenever I try and
-
What element is the limiting factor?
Greetings. A previous employee in my company had set up a a universal station machine Instron who communicated with Labview via GPIB to test. This station has served us for the last 6 years, but now we need to upgrade and I do not know what compone
-
good afternoon qd coloco o meu pc para visualizacao videos criados por mim can not open mas qd tento open any musica through da internet e apesar volume Cruiser estar no maximo o som e nao Audivel volume
-
Dear Guys, I read a lot about guys who wants to update to 10.0.10... I have a similar problem... When I go to "Software updates", I see the following screen. Screenshot If the update is available, but downloads even if plugged into a power supply wit