Site Web HTML - jumping around the screen, have not seen this before.

Similar Questions

• When we turn on my wife's ipad, a box of red line begins to jump around the screen, and then a pale red stripe moves back on the screen. Any ideas on how to stop it? Thank you

  When we turn on my wife's ipad, a box of red line begins to jump around the screen, and then a pale red stripe moves back on the screen. Any ideas on how to stop it? Thank you

  The standard specifies:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  -Restore factory settings/new iOS device.

  If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

• NB200 - cursor jumps around the screen while typing

  Hello

  When I type in MS Word or OpenOffice or any other text box on a Web site for example flushing prompt that identifies where the next word/character must be placed around the screen jumps.

  So when I type a line of text I then start another line below and then without reason, that the text cursor jumps to the top line. This inserts text in the wrong place, which is incredibly annoying!

  Any help or ideas greatly appreciated!
  Thesis writing will be more months if the problem persists! :)

  John

  Here is the solution I've used and displayed a few threads down...

  Under the properties of the mouse, click on the "Advanced" tab, click on the pointer speed and Tapping settings, in the new screen click setting Tapping, on this screen, check the box that says disable Tapping during the key entry.

  You will suffer is not since the Cursur jump you met more...

  HTH,

  The f

• How to move the "blue bar" with the start option and the clock and icons of a vertical__position on the left side of the screen to the bottom of the screen... has this before happen__once, can't remember what to do.

  How can I move the 'blue bar' with the start option and the clock and icons on the left side of the screen to the bottom of the screen.  It's happened before and I forgot how to move.

  Hello pookprec

  Here's how to do it

  .

• I want to disable my touchpad. Cursor/pointer keeps jumping around the screen

  Original title: wandering cursor

  I have a dell inspiron 1720 with Windows Vista 32-bit. I want to disable my touchpad. When I check in the Device Manager files, nothing has offered disable the touchpad. My cursor jumps around and I read that disable the touchpad will help to stop this. I downloaded Touchpad Pal, but that did not help. Thanks for any help!

  Hi murph528,

  I suggest that you contact Dell support for more information on disabling the touchpad.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support

• have the icon showing safari with webloc under him when I close safari.  have never seen this before.  What is it?

  When I close safari, I have an icon in a small box showing the logo of safari with webloc under him.  have never seen before.  What is it?

  It is a webloc file. A link to a certain Web page. Safari creates these when you drag the icon in the left side of the address bar of Safari on the desktop. He can trash if you do not want.

• How to get rid of "Web Page Message" indicating the object does not support this property or method.

  After I log on my computer, I get the following pop up message "Message on the Web Page" - "object does not support this property or method." He continues to pop everytime I try to do something

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• Cursor jumps around the screen.

  ASUS uses tactile keys, built by the Synaptics for most laptops, so you should have a few options for sensitivity in your mouse control panel.  Look here:

  1. Type 'mouse' in your Start menu to find and open the properties of the mouse.
  2. On the Hardware tab, select your touchpad device from the list.
  3. Click Properties to open the touchpad settings.
  Note that some Asus "netbooks" have keys to touch mutli-touch capable of handling 2 fingers, as "pinch to zoom".  They have no sensitivity adjustment.  In fact, I used an Asus netbook like that and it doesn't even have a switch for the touchpad, and I found it so senstive and boring that I returned it to the store.
  I'm sorry to say, but you might have to do the same, if you are not satisfied with the product.  There is only so much that Microsoft has control over, and that's something that only manufacturers can do anything on.

  Hi all

  I would like to add my 2 cents to the conversation.  I have an ASUS G73S MS Windows 7 Professional. It has a Synaptics touchpad and came with standard Synaptics software and the update of Scrybe to allow all the controls really fancies as pinch and 2 fingers to scroll. I have 8 GB of ram and a processor I7. So, it shouldn't be a question about background programs steal resources.

  I have this same problem cursor jumping, and he does the same typing this simple message of a real pain.  I also did a bit of research on this problem.  Maybe I have traced for some, the problem date back as far as from 2008 to 2003. It occurred in the Mac and it is apparently common in the PC, it seems to be a universal problem.

  Reasons/solutions vary:

  programs background too consume some resources or remove unnecessary programs.

  mice control/run virus program antivirus, touchpad question/switch to a mouse.

  Touchpad grounded questions/metal on the ground, program conflicts/reload last updated,

  Touchpad too sensitive / reduce touchpad senistivity.

  noticed an evening that said something about a file of bad scrll.exe or something like that

  Something on a download called Touchpad Pal has also seen, but I would be a search before you actually download to make sure that it is not malware.

  Most individuals find that disabling the touchpad and using a mouse connected real thread solved the problem.  He has done for me, but I still prefer using the touchpad due to lack of space for the mouse. Usually, I'm sitting in the Chair with the computer on my lap, that's why I wanted a laptop.  I just had my PC wiped and checked for viruses, it was clean. I had the actual number of operating processes, reduced to about 60.  Before you wipe it off, there were about 120. I will continue to try to find a solution, but I think that the best, I'll be able to do is reduce the jumping, not really to eliminate it.

• An enemy following me around the screen, but not too fast

  Hi, I'm building apps to teach English but through games.

  I want an enemy BUG following me around but NOT TOO soon as I have small children of 5 years using it,

  It would be something like the details of my HERO character and to send the BUG.

  I use the POINT at the moment to send my HERO to where the mouse clicks.

  I could send the BUG there as well but using less x and y increments.

  It would be too heavy for the processor - too much going on with the music as well?

  still, do not remove:

  var speed: Number =. 99;

  public void onEnterFrame(event:Event):void {}

  var xDistance:Number = clickPoint.x - this.hero.x;

  var yDistance:Number = clickPoint.y - this.hero.y;

  If (Math.abs (xDistance) > 10) {}

  var angle: Number = Math.atan2 (yDistance, xDistance);

  This.Hero.x += v * Math.cos (angle);

  This.Hero.y += v * Math.sin (angle);

  } else {}

  this.hero.gotoAndPlay ("static");

  }

  enemy1.x = speed * enemy1.x +(1-speed) * hero.x;

  enemy1.y = speed * enemy1.y +(1-speed) * hero.y;

  If {(clickPoint.x>=hero.x)}

  this.hero.gotoAndPlay ("right");

  trace (Math.ABS (xDistance));

  }

  If {(this.hero.x>=clickPoint.x)}

  this.hero.gotoAndPlay ("left");

  trace (Math.ABS (xDistance));

  }

  }

• How to open photoshop with tools window around the screen?

  How to open photoshop with tools window around the screen?

  Try this:

  

  I hope this helps!

  Julia

• UAC problem that I have not seen anywhere...

  After hours of seaching, have not seen this problem anywhere... ANY program or service windows or ANYTHING, that requires ANY SORT of UAC, that don't even start.  A small windowed back comes out of the box for less than a second, and without speech, before the UAC asking permission, then it goes away and nothing happens.  I can't run any programs or windows administrator, service even if I am, as I am never even asked to grant access.  This means also I can't force the account admin 'real' on or whatever it is in the same direction to solve problems... any help would be greatly appreciated.  I'm really puzzled as to what to do from here.

  Hello

  I suggest you to change the settings of the user account and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/what-are-user-account-control-settings

  It will be useful.

• I tried the clean boot and now the hard drive works simply and screen went black. The mouse still moves around the screen without any outher work keys? That is what it is?

  I tried the clean boot and now the hard drive works simply and screen went black. The mouse still moves around the screen without any outher work keys? That is what it is?

  Hello

  You will need to reverse the clean boot, as it is either incidental compared to
  the real cause of the problem. What, where you try to fix initially using the cleanboot?

  You can access Mode safe? Repeatedly press F8 as you start? If so you can try the configuration - control panel
  The Device Manager - graphics card - Double click on - driver tab - click the driver UPDATE - then
  Right click on the device and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure) is
  CTRL + ALT + DEL and the processes tab find EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Don't forget to make a good backup or
  3.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can do a repair installation that needs to save the data, but you will
  to reinstall the programs. This also requires correct Vista disks especially for OEM versions. You
  will need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - enter a bracket )
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows 7, normal use - mouse freezes when you move around the screen

  Hi there I use Win7 since the RC1 of scene and found it rock solid, I'm now running Windows 7 Enterprise. I installed it on a Dell XPS 1710 and had few problems so far. When I start my computer and you move the mouse around the screen, the mouse "hangs" for a second or two, then moves, then crashes again. In even the startup sound I is unstable, as are MP3 when I play those. All these things worked * perfectly * until a lock suddenly toward the top of the computer having been on during a few hours, which was a new event. The computer haddnt overheating but since then this nervousness thing that happened.

  What I tried:

  Selective startup, without the elements of startup and services, without change.
  Search for new drivers for my card (Nvidia 7950GTX) gfx, no change.
  Shut down the computer to turn off this device to save power 'allow' in the option of USB hub root

  None of that helped him. The CPU spikes 16% at most when you the mosue blocking, I have a lot of RAM available. Occurs when I use the touchpad as well and even when I'm not running all programs - oh, I have a Microsoft Intelli Mouse 5 button.

  Hopfully somebody can provide some more ideas for me. Thanks in advance

  Hello

  Please scan your computer of viruses, you can also perform a full scan online.

  Here is the link:

  http://OneCare.live.com/site/en-za/default.htm?mkt=en-za

  Try to clean boot your machine, here is the link:
  http://support.Microsoft.com/kb/929135

  Kind regards
  Jackson.

• On my ipad3 I rectangles blue moving around the screen. Momentarily switches to an article before moving on. Very irritating

  I have an iPad 3. Model MC707B/A. Version 9.3.2 (13F69).

  Blue rectangles are continually moving around the screen from one section to the other. Also a blue stripe sometimes crosses the screen. Has started yesterday for no apparent reason.

  I have tried rebooting with no luck. Helpline Apple could suggest only reset to factory settings. Does anyone have a less radical solution?

  This is one of the accessibility features. It's the switch command. You will need to go into settings > general > accessibility > switch control and turn it off. It is possible, that's what the setting is triple clicking the home button. Try triple clicking again and see if that if he stops, otherwise, use the road that I explained earlier.

• Satellite Pro M30: rim around the screen is broken

  I have a problem with the screen on my M30.

  He began to blur and sometimes it goes black, but turns on instantly.

  The black border around the screen is broken in the lower left corner, it never really seemed to be able to follow the screen correctly, and there are some time (a month or two) he snapped.

  It seems to me that there could be a loose or faulty connection somewhere. The problem often appears when I try to adjust the screen or move the computer. Someone has an idea of what might work?

  Hello

  Looks like this isn't something "fix-it-yourself". You should consider contacting an ASP for the fixed machine.
  The LCD mask is cosmetic and could be left off-, but the question of the LCD (screen goes fuzzy and come back) looks like to a defective part (LCD, wiring, PCB) or a bad connection on this path.

  If you still have the warranty - go to an ASP. If this is not the case, ask for a quote.

  BR

  Tom