site with tables layout problem

Similar Questions

• I am currently working on a site that has the integration of Paypal which includes the page redirects (confirm or cancel). My goal is to have the implementation of site with a layout for desktop, Tablet and phone. My question is when I have a redirect pag

  I am currently working on a site that has the integration of Paypal which includes the page redirects (confirm or cancel). My goal is to have the implementation of site with a layout for desktop, Tablet and phone. My question is when I have a redirect page should I create a separate provision of the page for each device or just a provision of office that fits all three screen sizes? I hope that if the html page has the same name of the device (query) is automatically detected. Help with the help of Adobe Muse CC

  By Payal integration, you mean paypal html button? or etc payment gateway configuration? If this is a configuration of the gateway to your site domain name then a single page with any structure will work, but if you use the button code for all associated formats then you will need to create separate pages for all.

  Thank you

  Sanjit

• Problems with table - layout

  Is it possible to set up a model for tables within a project - borders, shading, same size, that kind of thing? You can do this in the .css? I'm kind new to using .css, and mine is pretty basic right now.
  
  Thanks, Leisa

  See the tables on my site.

• Editable with table/model problem

  Hello
  I'm having a strange problem with my page, and being new dreamweaver I don't know what is happening.
  I created a template for my Web site and the template seems to work ok, but in my editable region, I get a huge space in my table. I can't find the source of this gap, I went through the code but nothing is jumping on me as bad. It was built in Dreamweaver CS3 V9.0 Build 3481.
  You can view the page at http://fcwp.org/betapage.htm and I'm pretty sure you'll see what I'm going to talk right now. All have a guess at this problem?
  -Leif

  After reviewing the code once again, I see what you're talking about. I started cleaning up the page and his work/research better now (although I broke my menus spry in the process). Thanks for the help!

• Reactive layouts: publish multiple Sites with conditional Builds and which connect

  I hope that someone can provide a simple solution to publish problems I've had with adapted presentations when you try to publish several sites with conditional builds. Essentially, I want to be able to have an index page that links to one of the two variants of the published sites that I called 'General' and 'specific '. When I click on the 'general' link I want to not open the site which was published with a conditional for all these subjects compilation labeled as 'general' and when I click on the 'link' want it to open the site which was published using a conditional version for 'specific '.

  Here are the steps I took to create sites and can't seem to get to bind correctly:

  Table of contents, topic Creation and tagging content

  1. Creates a Table of contents.
  2. Added 2 topics in the Table of contents. The first topic, I called "general" and the second issue I called, 'specific '.
  3. I then click with the right button on the "general" and selected subject Tag to build conditional apply. From there, I've created a new tag called "General".
  4. I repeated this process to create the specific tag, but do a right-click on the 'specific' theme and the creation of a new tag called "specific".

  Layouts reactive and edited the sites based on the conditional tags

  1. Created sensitive presentation using the standard layout and content generated without any conditional builds.
  2. Duplicated sensitive put in page and gave him the content of 'general' then it is generated using the conditional, "General" version If the finished publication published content has shown that the 'general' subject, as expected.
  3. I then repeated the same process for the specific content and content using the version parole, generated 'specific '. When over content published showed that the subject marked as 'specific' as expected.

  Added an Index page to the table of contents

  1. Created a new topic to serve as the launch page.
  2. Added a 'general' hyperlink called for the launch of the general "theme found in the general publishes from the resource manager.
  3. Added a hyperlink called 'specific' to the launch of the general "theme found in the specific issues from the resource manager.
  4. I then republish the sensitive standard layout site.

  From this point, it gets stuck and won't open properly published Web sites. I don't know why it won't launch hyperlinks correctly. Is there something I'm missing? Let me know if you do not want to see my files. I will be gladly their.

  OK, thanks a lot for the capture screen. They help more than you realize.

  So here's one of the biggest mistakes I think that you have done so far. You use the resource manager to link to published results. If it is technically possible to do, I'm pretty sure Adobe never planned for it to be used this way.

  It may help to think in terms of creation of food products. I have long considered as RoboHelp to be very much like working in my kitchen. All consumables (heading text in the headings, images, HTML pages, etc.) are just as raw ingredients. (Eggs, milk, flour, etc.). The places of storage (hard drive) it's like the pantry and the fridge. And RoboHelp provides facilities to easily combine ingredients to create the different recipes.

  This next bit will be somewhat exaggerated, but bear with me. Maybe you have one or more neighbors and all you want to share some common "ingredients". If you set the things where each of you have access to a wine cellar and a shared refrigerator. Maybe you do a Dutch sauce killer. You create it and place in the refrigerator, then your other participants have access through the common "fridge". This is exactly what the resource manager is intended to help.

  Now assume that you create something like cookies chocolate chip and you keep in the refrigerator. Well, that's fine, but you don't want to use cookies to chocolate chip already baked in a recipe that might call for cookie dough. But that's what happens when you take an exit and place in a place intended for raw ingredients. And you will see the strange behavior. Prepare for these cookies chemically changes them so that cookies already are significantly different from the dough used to create them. Similarly, you don't want to take one or more output files and reuse in a project source.

  So in your case, you run an index file and that fires events to produce the output. All should be well. But when you click on the links to open topics, topics are intended to show up more in the right panel. Think of the picture of how works of image on a TV. The moment that link you to something intended to fill the screen, he is forced into this smaller area on the right. If you end up with what you see in the last picture.

  I suggest the following steps.

  First, REMOVE your resource manager exits.

  REMOVE all links that can point here.

  Output records where people will consume copy your projects. (The web server)

  Then figure either the parent (.. /.. / somefolder/somefile.htm) path to other systems or the absolute path (http://www.whatever.com) and to link the projects in this way.

  Sorry, but without seeing the installation of first hand, it is difficult to say what should be these paths.

  I hope this was helpful... Rick

• Automatic updates program turned out impossible to turn it on, with error message "site has encountered a problem and cannot display the page you are trying to view.

  Original title: Auto updates

  My automatic updates program is disabled.  When I try to turn it on, I get this message "the site has encountered a problem and cannot display the page you are trying to view.  Automatic updates forever, why was off and why he now won't come back?

  Bill T

  E-mail address is removed from the privacy *.

  Hi Bill,

  This problem can be caused if the automatic updates service may be missing in the Services snap-in.

  1. is the Service Pack 3 installed on your computer?

  2. what anti-virus software you use in your computer?

  Follow the steps below:

  Method 1:

  To resolve this issue, follow these steps:

  1. Click Start, click run, type explore, and then click OK.
  2. Look for the following folder:

  %windir%\System32\inf

  Note The %windir%\System32 placeholder represents the path of the WINDOWS System folder. Typically, C:\WINDOWS is the path of the WINDOWS System folder.

  The inf folder is a hidden folder. To view the inf folder, follow these steps:

  a. on the Tools menu, click on Folder Optionsand then click the view tab.

  b. in the list of Advanced settings , click to display the hidden files and folders under hidden files and folders.

  c. click applyand then click OK.

  3. double-click on the inf folder, right-click in theand then click install.

  4. click on Browse. Look for, and then click the \ServicePackFiles\i386 %windir%\System32folder if the following conditions are met:

  • You install Windows XP SP3 from a CD Windows XP SP3 which included as part of the basic installation of SP3.
  • You have downloaded and installed Windows XP SP3 from the Microsoft Web site.
  • Windows XP SP3 was included with the computer.

  Note If the files from the Service Pack folder is not present on the computer, you can copy the files from a Windows XP SP3 slipstreamed installation CD.

  5. click OK to copy the files.

  6. change the setting on the computer to not display the hidden files and folders. To do this, follow these steps:

  1. On the Tools menu, click Folder Options, and then click the view tab.
  2. In the list of Advanced settings , click show not the hidden files and folders under hidden files and folders.
  3. Click applyand then click OK.

  7 restart the computer and check.

  Method 2:

  Follow the steps in the link below.

  You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update:

  http://support.Microsoft.com/kb/883614

  For reference:

  How to configure and use automatic updates in Windows:

  http://support.Microsoft.com/kb/306525

   

  If you need further assistance on this topic, let know us and we will be happy to help you.

• Site to cause VPN - problem with IOS 12.4 of the site?

  I have a site with several VPN is configured. Sites with routers (Cisco all) running IOS 12.3 or down are fine. New routers with IOS 12.4 may establish the VPN connection and I can ping the remote networks. When I try to access the Intranet homepage from a remote site, the home page is displayed, but I am not able to access all pages. The same thing is happening with another application (SQL Server program). The clent (remote site) can connect to the SQL database and perform a task, and then get a connectivity error. Sites running IOS 12.3 not have these problems.

  ANY IDEAS please?

  Looks like an MTU problem.

  see if you can clear the df bit in the packet encrypted using the command

  Crypto ipsec df - bit clear

  or

  On the output interface, use the ip tcp adjust-mss command 1400.

  Let me know if it helps

• I have Lightroom 4.4 on my Mac laptop. It came with the purchase of a Leica camera. When I check the updates, the answer is that there is no update available. Download Version 5.7 of Adobe's Web site with no problems?

  I have Lightroom 4.4 on my Mac laptop. It came with the purchase of a Leica camera. When I check the updates, the answer is that there is no update available. Download Version 5.7 of Adobe's Web site with no problems?

  Your license for the 4.4 release will not work with version 5.7, you can download it without doubt, but if you do not have version 5.7 download then it won't do much good.  If you do not have a license for it so you won't be able to use it beyond use of the trial.

• I have problems to download from a Web site with more than 100 pages. The download is stuck at 6%. Muse has a page limit? I use Adobe Muse CC 2014 v7.4

  I have problems to download from a Web site with more than 100 pages. The download is stuck at 6%. Muse has a page limit? I use Adobe Muse CC 2014 v7.4

  425 is the error that you have been doing all along? That looks like a firewall or router problem or a server side hosting configuration problem.

• Site to Site VPN Phase 2 problem

  Hello

  I have a problem of IPsec VPN. We have an ASA 5580 to build the VPN site to site with ALU VPN gateway (from partner). The VPN connection is not established. We have checked configurations of devices pair but not found so far any problem. I tried to debug crypto isakmp 127 and got newspaper as below. We always try to find the root cause of this and I could have your advice for the Please this problem? Thank you. (Actual IP address are changed for privacy)

  Drawing1.jpg

  

  Apr 08 10:43:45 [IKEv1 DEBUG]: IP = 1.1.1.1, IKE SA proposal # 1, turn # 1 entry overall IKE acceptable matches # 2

  Apr 08 10:43:45 [IKEv1 DEBUG]: IP = 1.1.1.1, build payloads of ISAKMP security

  Apr 08 10:43:45 [IKEv1 DEBUG]: IP = 1.1.1.1, building the Fragmentation VID + load useful functionality

  Apr 08 10:43:45 [IKEv1]: IP = 1.1.1.1, IKE_DECODE SEND Message (msgid = 0) with payloads: HDR + HER (1), SELLER (13) + NO (0) total

  Length: 104

  Apr 08 10:43:45 [IKEv1]: IP = 1.1.1.1, Message RECEIPT of IKE_DECODE (msgid = 0) with payloads: HDR + KE (4), NUNCIO (10) + NO (0) total

  Length: 180

  Apr 08 10:43:45 [IKEv1 DEBUG]: IP = 1.1.1.1, processing ke payload

  Apr 08 10:43:45 [IKEv1 DEBUG]: IP = 1.1.1.1, processing payload ISA_KE

  Apr 08 10:43:45 [IKEv1 DEBUG]: IP = 1.1.1.1, processing nonce payload

  Apr 08 10:43:45 [IKEv1 DEBUG]: IP = 1.1.1.1, building ke payload

  Apr 08 10:43:45 [IKEv1 DEBUG]: IP = 1.1.1.1, building nonce payload

  Apr 08 10:43:45 [IKEv1 DEBUG]: IP = 1.1.1.1, build payloads of Cisco Unity VID

  Apr 08 10:43:45 [IKEv1 DEBUG]: IP = 1.1.1.1, constructing payload V6 VID xauth

  Apr 08 10:43:45 [IKEv1 DEBUG]: IP = 1.1.1.1, Send IOS VID

  Apr 08 10:43:45 [IKEv1 DEBUG]: IP = 1.1.1.1, ASA usurpation IOS Vendor ID payload construction (version: 1.0.0 capabilities: 20000001)

  Apr 08 10:43:45 [IKEv1 DEBUG]: IP = 1.1.1.1, build payloads VID

  Apr 08 10:43:45 [IKEv1 DEBUG]: IP = 1.1.1.1, Send Altiga/Cisco VPN3000/Cisco ASA GW VID

  Apr 08 10:43:45 [IKEv1]: IP = 1.1.1.1, connection landed on tunnel_group 1.1.1.1

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, the IP 1.1.1.1, Generating keys for answering =...

  Apr 08 10:43:45 [IKEv1]: IP = 1.1.1.1, IKE_DECODE SEND Message (msgid = 0) with payloads: HDR, KE (4), NUNCIO (10) + (13) seller +.

  SELLER (13), SELLER (13), SELLER (13) + (0) NONE total length: 256

  Apr 08 10:43:45 [IKEv1]: IP = 1.1.1.1, Message RECEIPT of IKE_DECODE (msgid = 0) with payloads: HDR + ID (5) + HASH (8), NOTIFY (11) +.

  NONE (0) overall length: 92

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, payload processing ID

  Apr 08 10:43:45 [IKEv1 DECODER]: Group = 1.1.1.1, IP = 1.1.1.1, ID ID_IPV4_ADDR received

  1.1.1.1

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, the IP 1.1.1.1, payload = hash of treatment

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, calculation of hash for ISAKMP

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, processing notify payload

  Apr 08 10:43:45 [IKEv1]: IP = 1.1.1.1, connection landed on tunnel_group 1.1.1.1

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, building the payload ID

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, build payloads of hash

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, calculation of hash for ISAKMP

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, building dpd vid payload

  Apr 08 10:43:45 [IKEv1]: IP = 1.1.1.1, IKE_DECODE SEND Message (msgid = 0) with payloads: HDR + ID (5) + HASH (8), SELLER (13) + NONE

  total length (0): 84

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, PHASE 1 COMPLETED

  Apr 08 10:43:45 [IKEv1]: IP = 1.1.1.1, Keep-alive type for this connection: None

  Apr 08 10:43:45 [IKEv1]: IP = 1.1.1.1, Keep-alives configured on, but the peer does not support persistent (type = None)

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, timer to generate a new key to start P1: 21600 seconds.

  Apr 08 10:43:45 [IKEv1 DECODER]: IP = 1.1.1.1, IKE Responder starting QM: id msg = 0dbcde8a

  Apr 08 10:43:45 [IKEv1]: IP = 1.1.1.1, Message RECEIPT of IKE_DECODE (msgid = dbcde8a) with payloads: HDR + HASH (8) + a (1), NUNCIO (10)

  + KE (4) + ID (5) + ID (5), NONE (0) overall length: 524

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, the IP 1.1.1.1, payload = hash of treatment

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, processing SA payload

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, processing nonce payload

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, processing ke payload

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, ISA_KE to PFS treatment in phase 2

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, payload processing ID

  Apr 08 10:43:45 [IKEv1 DECODER]: Group = 1.1.1.1, IP = 1.1.1.1, ID ID_IPV4_ADDR received

  2.2.2.2

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, data received in payload ID remote Proxy Host: address 2.2.2.2.

  Protocol 0, Port 0

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, payload processing ID

  Apr 08 10:43:45 [IKEv1 DECODER]: Group = 1.1.1.1, IP = 1.1.1.1, ID ID_IPV4_ADDR received

  3.3.3.3

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, data received in payload ID local Proxy Host: address 3.3.3.3,.

  Protocol 0, Port 0

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, the IP 1.1.1.1, QM IsRekeyed its not found old addr =

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, static checking Card Crypto, check card = Outside_map, seq = 1...

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, static checking Card Crypto = Outside_map, seq = 1, ACL does not match

  Proxy src:2.2.2.2 dst: 3.3.3.3 IDs

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, static checking Card Crypto, check card = Outside_map, seq = 2...

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, static checking Card Crypto = Outside_map, seq = 2, ACL does not match

  Proxy src:2.2.2.2 dst: 3.3.3.3 IDs

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, static checking Card Crypto, check card = Outside_map, seq = 3...

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, static checking Card Crypto = Outside_map, seq = 3, ACL does not match

  Proxy src:2.2.2.2 dst: 3.3.3.3 IDs

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, static checking Card Crypto, check card = Outside_map, seq = 4...

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, static checking Card Crypto = Outside_map, seq = 4, ACL does not match

  Proxy src:2.2.2.2 dst: 3.3.3.3 IDs

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, static checking Card Crypto, check card = Outside_map, seq = 5...

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, static checking Card Crypto = Outside_map, seq = 5, ACL does not match

  Proxy src:2.2.2.2 dst: 3.3.3.3 IDs

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, static checking Card Crypto, check card = Outside_map, seq = 6...

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, static checking Card Crypto = Outside_map, seq = 6, ACL does not match

  Proxy src:2.2.2.2 dst: 3.3.3.3 IDs

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, static checking Card Crypto, check card = Outside_map, seq = 7...

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, static checking Card Crypto = Outside_map, seq = 7, ACL does not match

  Proxy src:2.2.2.2 dst: 3.3.3.3 IDs

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, static checking Card Crypto, check card = Outside_map, seq = 8...

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, static checking Card Crypto = Outside_map, seq = 8, ACL does not match

  Proxy src:2.2.2.2 dst: 3.3.3.3 IDs

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, static checking Card Crypto, check card = Outside_map, seq = 9...

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, static checking Card Crypto = Outside_map, seq = 9, ACL does not match

  Proxy src:2.2.2.2 dst: 3.3.3.3 IDs

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, tunnel IPSec rejecting: no entry for crypto for remote proxy card

  2.2.2.2/255.255.255.255/0/0 proxy local 3.3.3.3/255.255.255.255/0/0 on the interface outside

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, sending prevent message

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, constructing empty hash payload

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, build payloads of hash qm

  Apr 08 10:43:45 [IKEv1]: IP = 1.1.1.1, IKE_DECODE SEND Message (msgid = 456db437) with payloads: HDR + HASH (8) + NOTIFY (11) + NONE

  total length (0): 576

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, the IP 1.1.1.1, QM WSF error = (P2 struct & 0x3d51e058, mess id 0xdbcde8a).

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, history of mistake IKE responder QM WSF (struct & 0x3d51e058) .

  : QM_DONE, EV_ERROR--> QM_BLD_MSG2, EV_NEGO_SA--> QM_BLD_MSG2, EV_IS_REKEY--> QM_BLD_MSG2, EV_CONFIRM_SA--> QM_BLD_MSG2, EV_PROC_MSG -.

  > QM_BLD_MSG2, EV_HASH_OK--> QM_BLD_MSG2, NullEvent--> QM_BLD_MSG2, EV_COMP_HASH

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, sending clear/delete with the message of reason

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, removing counterpart table correlator failed, no match!

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, IKE SA MM:db841932 RRs would end: MM_ACTIVE state flags

  0 x 00010042, refcnt 1, tuncnt 0

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, IKE SA MM:db841932 ending: flags 0 x 01010002, refcnt 0,.

  tuncnt 0

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, sending clear/delete with the message of reason

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, constructing empty hash payload

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, building the payload to delete IKE

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, build payloads of hash qm

  Apr 08 10:43:45 [IKEv1]: IP = 1.1.1.1, IKE_DECODE SEND Message (msgid = c1606511) with payloads: HDR HASH (8) + DELETE (12) + NONE

  total length (0): 80

  Apr 08 10:43:45 [IKEv1]: ignoring msg SA brand with Iddm 2781184 dead because ITS removal

  Apr 08 10:43:46 [IKEv1]: IP = 1.1.1.1, encrypted packet received with any HIS correspondent, drop

  It is Phase 1 ends successfully, but when the remote end sends the traffic that must match your crypto card and put in place a Phase 2 IPsec SA, it does not match:

  Rejecting the IPSec tunnel: no entry for crypto for remote proxy card

  DoubleCheck that "2.2.2.2 to 3.3.3.3" is to map your end crypto (and that the obverse is located in the remote side).

• Table format problem - please help

  Here's what I'm trying to do:

  I have a set of documents in xml format according to the docbook standard.  In these documents, there are also types of table.  Standard TABLE with its tag element and an informal table with the tag of the INFORMALTABLE element.

  When they are open and my file format and ESD apply I want Standard tables to have a blue shadow header and informal boards have a shaded gray header.  I created the models of appropriate table.  I can't understand a way via ESD to specify the type of table format that works.  When I open an xml and apply the edd and the format of all tables to open it using the table format that appears first in the list.

  What can I do for ESD to reach my goal?

  Thanks in advance

  Russ,

  Thanks for letting me know my messages were getting through. I just responded to the original rather than through the interfaces forums and had no idea there was a problem. I tried to post twice on this topic today:

  The messages were:

  Russ,

  You are right. A DSP can specify an initial table format. The word "initial" is the key. This is the format that is used when a new table is created, if the new table is created interactively by the user or by opening a SGML or XML document. Initial table layouts do not affect the existing tables. In fact, for a table created in interactive mode, the initial table format determines the format that is highlighted when the Insert Table dialog first. The user is free to choose a different size if you wish.

  and

  Qualar,

  R/w rules are not sensitive to the context, so that if you use an FM tgroup element, they will not be able to help. Tgroup in your EDD definition can define a format of original table of Format if the tgroup is within the item table and Format B if the tgroup lies in informaltable. Just make sure that you have imported ESD in the model before you open the XML document. As you have noticed, if you open the XML document and then import the EDD, the tables already exist and that their format is not affected.

  -Lynne

• play with adf layout components

  Hi experts,
  
  use jdev 11.1.1.5.0 - adfbc - db oracle 10g - mozilla ff 9.01.
  
  no problem with my project.
  
  I understand what I want, and am playing with layout components
  
  the question hit me always.
  
  Sometimes these components make me sore.
  
  In the style of line class:
  where should I use af:strecthwidth? AF:auxillarystrecthwidth?
  
  I know that these components is well suited for
  AF:panelcollection and af:table and some
  
  In width and height
  where I do use px (pixels)? Percentage (%)?
  most likely all.
  
  
  I made a few stupid mistakes
  
  I didn't know it's really stupid? or not
  
  for example:
  
  I use a few af:strecthwidth for the af:panel collection and use the width property in 368px.
  
  If used instead of average % px.
  
  alignment is not correct.
  
  as this am used ah many components. some how.
  
  
  
  but my question is:
  
  PX is dedicated to af:strecthwidth af:auxillarywidth?
  
  This sentences make you it clearer
  is there an adf rule if you use px means that you can use af:strecthwidth af:auxillarywidth
  y at - it any rule adf if you use %, this means you can not or do not use af:strecthwidth af:auxillarywidth
  
  
  Thus,.
  
  I tried to Ocean (google).
  
  Best regards, playing with the layout (documentation well or well bloged by experts).
  
  still not found?

  ADF7,
  do this (or something similar) there is little time?

  In any case, you should read http://jdevadf.oracle.com/adf-richclient-demo/faces/feature/layoutBasics.jspx to get the general feeling on the design of the pages
  I guess you know video Shay http://blogs.oracle.com/shay/entry/adf_faces_layouts_demo_-ahid
  This blog http://martindeh.blogspot.com/2009/08/adf-layout-overview-and-best-practices.html and http://www.adftips.com/2010/11/adf-ui-tips-to-stretch-different-adf.html give also some valuable tips.

  My summary would be to avoid values of %, use only px values when no other solution is possible. This allows you to design pages that are scalable. I know it is not easy, but after conception about 1000 pages (: you get practice...)

  Timo

• Help with hyperlink - weird problem

  Hi, I use Dreamweaver to create a web page.
  
  I created my Web page layout page/logo/buttons/bg with Photoshop and ImageReady and then cut, then I've saved as HTML and opened it with Dreamweaver CS3.
  
  Adding text is no problem, removal of slices and making them in a background so I can add text above are not a problem. But when it comes to adding a link to a button (local file or a url), after choosing, it moves a few incongruous slices and mess my page.
  
  I also tried the link via the code window, but it's always the same. What is a bug? I created a few sites with 8 DM, use the same methods and I've never had this problem before?
  
  Help please?

  The reason is to create a hyperlink border is created. Either add border = "0" on your image or img {border = '0'} in your stylesheet if you have one.

  Shane

• Firefox 40.0.3 is a disaster. I constantly, constantly getting error 404, same visitors sites to present no problem. That is what it is?

  Since I installed 40.0.3, Firefox has been problematic, constantly sends me 404 errors that I have to search the Web or visit the sites to display without problem. It has gotten to the point where I went to OmniWeb, even if it's just as buggy, if not more. Yet, I can at least visit most of the problematic sites on Omniweb after getting the 404 on Firefox. Firefox has always been a big eater of memory, but I could live with that. These 404 errors are driving me crazy.

  An example is the site of the game from the Washington Post. When I try to play daily crosswords and click on 'Play now', I always get the 404.

  This has been helpful, but what really solved it was going through the process given in the following link:
  https://support.Mozilla.org/en-us/KB/troubleshoot-extensions-themes-to-fix-problems

  It turns out that I needed test defective and ultimately extensions, disable the extension Searchme.

  Thanks for having me on the right track.

• Firefox does not display properly and is very laggy on sites with Protection DDoS CloudFlare

  Since 35.0 and especially I get odd behavior on sites with CloudFlare DDoS protection.

  When I open the site in a new window, it really takes a lot of time and sometimes nothing appears and gives me a blank page. and now that she just started saying 'New tab' and I can't hit refresh.

  When the site loads actually after 20 attempts something, the site is lag, any action takes more than 20 seconds.

  When I try to open something, I have a blank page with the URL to tabs. Whenever I try like or post anything, it delays of 15 to 20 seconds.

  The site I'm trying to use with a lot of failure. http://hypixel.NET/

  Anyone else having this problem?

  Have you installed incredibar yourself? Do you want only it? I really think it's that slow you down.
  Its a diversion ad-ware here is how to uninstall it http://malwaretips.com/blogs/remove-mystart-by-incredibar-virus/