Size of file to export to youtube

Similar Questions

• How to export in the same exact quality file when bleow for youtube?

  Hello

  IM writing here because im really tired of export of dozens of files with bad quality even if im using the parameters of the best exporters.

  I tried to watch tutorial clips where people show how to make the best quality but still I can't understand... I don't really understand where im hurt!

  I would be grateful if we some1 out there that could help me to export in correct settings... I know that its not easy to help some1 with parameters by writing here you need to know what settings I have shot with what settings I'm using in my calendar and what im using to export... and so on.

  but I give it a try...

  So it's like this ive got a named unit

  Sony HDR CX730E

  and I did my job with setting (pic1)

  

  his writings in Swedish anyway its avchd 1920 x 1080 50 p

  So I created a project as (photo 2) parameter

  

  and sequence settings (pic3)

  

  and when I export I tried to export in dozens of files to see which seems to be the best as H.264, HD 1080 p 29.97 or youtube HD 1080 p 29.97 and even I tried Mxf op1a avc intra class100 1080p25 p, which gives superb quality HD, when I play on computer but the files is almost 3, large 5 GB but I think that the greatest and the file is the best quality that I get!

  In any case when I upload the mxf file or any other file I exported to youtube, it gives a very bad quality once u put Full HD 1080 full screen... it's almost as if u play without HD...

  I want to achieve something like this http://www.youtube.com/watch?v=avCWzkNiXok

  and my video like youtube video quality I just showed but unfortunately only in my computer not on youtube...

  So, if there is some1 out there who cud help me ill be so grateful to you!

  Thank you

  (im using adobe first pro cc)

  Ok.

  First of all, I would not try to export 50 fps to 29.97 FPS.  I would use 25 fps if I used something other than 50 frames per second.

  Secondly, there is no need to change your settings at all. YouTube said to download at the same rate as you shot.

  https://support.Google.com/YouTube/answer/1722171?hl=en&ref_topic=2888648

  You will also notice that 8 Mbps is the 'standard' quality and you can go up to 50 MB/s for 1080 p. Then try to export through the same flow rate than your original recording. If it was 25 Mb/s then try it. So 50 MB/s go ahead and try this case you are still not satisfied at 25 Mb/s.

  Although, generally, I find that I'm happy at 15 Mb/s for video without much action, 25 MB/s for most of the video and for the sport, I use the 50 MB/s max.

  That said, I don't worry about the file size more. I have the disk space and a fast Internet connection. If either of those who are a problem for you, then you may need to adjust your expectations.

• How check today of size of rman and export size in oracle

  I need to check the sizes of rman and exports todays and length... .in Linux environment list us files with sizes .but we see oracle point of you...

  You can check the size of the last day rman backups status:

  Select DB_NAME, TO_CHAR (START_TIME, "mm/dd/yy HH24 '") start_time, TO_CHAR (END_TIME, ' Mm/dd/yy HH24') end_time, time_taken_display, STATUS,

  Round (OUTPUT_BYTES/1024/1024) BACKUP_SZ

  OF e RC_RMAN_BACKUP_JOB_DETAILS

  where start_time between sysdate-1 and sysdate

  order by 1, DB_NAME;

• size of files when saving for the web

  'Save for web' sometimes export icon to very small size with size huge file (500Ko), when I take the same image and re - record using "Save for web", I get the small file (1 or 2 KB)

  Why does this happen?

  This happens because Photoshop is save the metadata in your PSD and JPG files. You can see that from Photoshop in file Info under the file menu, and then on the tab of raw data you will be able to see usually several lines of metadata information, sometimes thousands, and if you did a lot of manipulations on the file that can add literally MBs to the size of the file. Save for the Web and export as you can delete metadata. Personally, I find it a nuisance more than a useful feature tends to remove metadata from Lightroom, there is a plugin that allows you to select what you want to keep and what to throw away.

  Hope that helps

  Terri

• Why my size indesign brochure A4 exports as a U.S. letter format?

  Hello, I checked my configuration of Document Indesign, and I certainly Australian A4 size implemented still whenever I export the pdf file that exports under a U.S. letter. (Only been alerted when my printers called to ask why I had the sizing of the letter).

  Preparation of the InDesign Document is one thing - you can set your file of format A4.

  But using the Page tool you can resize your page to another size - and you will see that in the size of the document, the size is independent to this page.

  Select the Page tool and select the page - take a look in the top control panel to see what are the dimensions.

  To reset your page to the Document Preset, and then drag a Master Page to the page in the Pages panel.

  Let me know if this helps.

• How to configure this file to export properly?

  Hello

  I'm new to Illustrator and having a bit of trouble. I want to set up this file to export the 3 images together, side-by-side with a size of 100% to approximately 36 "x 12". I then go to download the file to print, matted and framed. Currently, when I export the file in PDF format the program saves only the image of "laugh often". What is the best way to approach this task and set up the Web to export properly? I took a screenshot of the issue below.

  Thank you

  Gordon

  

  Of the image, the work plan is only around the Center banner (this is the black line). Just go to the preparation of the Document > change the plans of work or the artboard tool and make the artboard large enough to include all works of art.

• Export to YouTube: how to get rid of the black bars

  I would like to know if there is an option that can cut the sides of the video instead of insert black bars.

  In my Adobe Premiere-timelime film is fine. The image size is 720 x 576 (PAL) and so is the size of my sequence. I'm now trying to export to YouTube and the other actors of the web, which are 640 x 480. But I don't know what settings to use so that I don't get the black bars.

  Maybe next time I should create a sequence in 640 x 480 right?

  Any help would be appreciated.

  That is right.

  If you want to get rid of those bars you must "reframe the output video" in the source of the export settings tab.

• Export to YouTube: don't want 60 fps

  I created 3 different films in iMovie using the same imported clips (mp4). One of the films that I exported to YouTube is YouTube 720 p. The other two appear as 720 p 60. Movies 720 p 60 drags badly, while the 720 p movie plays perfectly as all my other movies have. I used the same settings to export to YouTube for all 3 movies. Why one would be different from that of the other two? I don't want 60 fps on YouTube videos. How can I avoid this?

  The framerate is on of the first item in the timeline, so to get a 30 fps movie you must put video of 30 frames per second first.  No matter what it is because it can be deleted later.  See: http://help.apple.com/imovie/mac/10.1/#/move6ccb3330 for more details.  To change your fps 60 30 films create a new project, put a 30 fps clip, copy all your film of 60 images/s existing and paste in the new.  Remove the clip of 30 frames per second and sharing.

  Geoff.

• What is FAT, FAT32 & NTFS maximum file size of file systems supported? File system of all the methods of the passage of FAT & FAT32 to NTFS without formatting is appreciated.

  What is FAT, FAT32 & NTFS maximum file size of file systems supported? File system of all the methods of the passage of FAT & FAT32 to NTFS without formatting is appreciated. (IE without deleting the files from a particular disk).

  Difference between material FAT & FAT32?

  I have a disk full of files, and it is in the FAT32 file system. As I can't copy large files (5 GB +) in this player, I intend to fix this by changing the file systems. Apparently, it is not possible to do it without formatting. I am curious about a way to do this without destroying the drive.

  Thanks in advance.

  Eguy

  Tuesday, October 9, 2012 16:55:51 + 0000, Eguy wrote:

  What is FAT, FAT32 & NTFS maximum file size of file systems supported? File system of all the methods of the passage of FAT & FAT32 to NTFS without formatting is appreciated. (IE without deleting the files from a particular disk).

  Difference between material FAT & FAT32?

  First, note that there are three varieties of FAT: FAT12, FAT16, and
  FAT32. Many people call just FAT16 FAT, because before that FAT32 is out.
  FAT16 is the only variety used for hard drives, so just
  The FAT was not enough.

  FAT12 (hardly any more used) had a maximum volume size of 12 MB.
  It has been used almost exclusively for floppy disks.

  FAT16 was used on hard disks (or partitions) up to 4 GB and had a
  cluster size which varied from 2 KB to 64 KB, depending on the size of
  the partition. It serves almost never again, because almost nobody does
  a as small as 4 GB partitions.

  FAT32 FAT16 succeeded and has a maximum drive size of 2 TB. His
  maximum file size is 4 GB, which explains why you can't copy a file of 5 GB to
  it. its cluster size is 4 KB up to an 8 GB partition. Beyond 8 GB the
  cluster size develops up to 32 KB.
  NTFS, that's what almost everyone should use on their hard drives
  today. Its maximum volume size is 2 ^ ^ 64-1 and its maximum file size
  16 × 1024 is ^ ^ 6 bytes (much more than the bigger hard drive available
  today). Cluster size is 4 KB, regardless of the size of the volume.

  I have a disk full of files, and it is in the FAT32 file system. As I can't copy large files (5 GB +) in this player, I intend to fix this by changing the file systems.

  Good! You should.

  Apparently, it is not possible to do it without formatting.

  It's not correct. To convert to NTFS, use you the CONVERT
  command. But first read http://www.aumha.org/a/ntfscvt.htm , because
  There is an important question about the size of cluster that is not obvious.

  Also note that conversion is an important step, touching everything on your
  drive. When you take a big step, no matter how unlikely it is
  always possible that something can go wrong. For this reason, there
  careful to make sure that you have a backup of everything you can not afford to
  lose before you start.

  Ken Blake, Microsoft MVP

• Encrypt a file when exporting to Oracle

  Can encrypt us an entire file when exporting to oracle? I'm generating a CSV file but finally I need to post it on my application, but the only problem is there encryption is implemented on demand in a way as if the file is downloaded from the application, then the file will be automatically encrypted and all by downloading the same file, it will decrypt and display.

  But when I generate the file is the database directly, and then when my shell script to move the file to the DB server to the application server and finally download... does not work because the application attempts to decrypt the file while the file is not encrypted to first step...

  Is there anyway that we can directly encrypt with a key that can be the same password that the application uses too.

  Let me repeat in case you missed it:

  It's your code that creates the CSV file.

  If you can do WHAT you want with the data and the file whenever you want to. If you want to encrypt go ahead.

  Oracle database cannot create or manage CSV files. Client application programs and code to do. Such a file is located in the file system. And it is accessible via standard kernel I/O calls. If you want to encrypt the file created by your application code, then update your application code to support this. It is not a problem of database Oracle.

• Audio damage when the file is exported in Adobe Media Encoder queue?

  Hey guys

  Hope you can help me with my problem...

  I'm fairly new work in After Effects, so I might have too have it explained in detail.

  I am currently working on several animations for the customer, where I did the visuals and got audio lying elsewhere...

  There have had no problems with the audio before the lengthening...

  When I play the audio (wav file) new in Quicktime format, there is no problem at all - it's the same for when I play the audio in AE, no problem either...

  BUT when I export the files through Adobe Media Encoder queue (h:264 - mp4) audio is corrupted and when played in Quicktime,.

  the last seconds is played at least twice, just to repeat... I tried with 2 of 5 files, and both were corrupted, with the same error in the end...

  I can't know if the files are corrupt (the guy who fixed them) in a way that he doesn't ' watch that "when files are exported through AMECQ...

  Or if I just do it wrong... I worked at AE for about 5 months, so I don't know yet of all the parameters, etc...

  Hope you can help because it is an urgent task and there is no one else in the office that I work, knows nothing about AE... Haaalp!

  Thank you

  Katrine

  This problem is fixed in update fixes after effects CC 2015.3 (13.8.1). This update, available now, can be installed by using the creative Office Cloud app, or by choosing Help > updates within any Adobe application.

• should what size of file I use on jpg imported for them to properly size with Premiere Pro. When I import them into different sizes, they are large or small

  should what size of file I use on jpg imported for them to properly size with Premiere Pro. When I import them into different sizes, they are large or small

  In the preferences, select scale to frame size and then any media imported after the modification will be automatically resized to fit your sequence.

  Thank you

  The f

• DW shows not sizes correct file in the files Panel

  Hello

  I use DW CC 2015.1 on Mac 10.10.5.

  I notice a difference in file size.

  In the finder if I discover a Quicktime move, it indicates the size of the file is 313.1 MB. DW, said that the same file 298,63 MB.

  DW displays all file sizes smaller than what indicates the operating system.

  I also took a glance on my second Mac that is running 10.11.3 and the same thing. State of Mac OS 313,1, DW on Mac (same versions DW) indicate less large files.

  Anyone else notice this? Is this a bug in DW or a problem with the operating system?

  I did not pay attention as much file size differences to be honest, because I do not transfer or work with files that large in DW sizes.  However, if you're not a Mac user for a long time, there was an update of how Mac computes sizes of files made back in Snow Leopard (10.7).  I suspect that DW used the other method of calculating file size and not the new method that apple used.  I worry too much on this subject.  The only place I would look at is your host if they have a limit to the size of the file.

  Here's an article that explains the change: math new Snow Leopard | Macworld

• Hello. Editor of newbie here. If I split a video file into two clips in Premiere Pro and you want then save each one as a different file while exporting to the encoder, how to make sure that they are registered in the form of two different with different

  Hello. Editor of newbie here. If I split a video file into two clips in Premiere Pro and you want then save each one as a different file while exporting to the encoder, how to make sure that they are registered in the form of two different files with different after encoding names?

  Located in and out on a section and that export brands.

  .. .Rinse and repeat for the other section.

  Name each section and where it is exported to separately... and as you wish

• Hi, is it possible to change the names of files that export out of indesign while packing?

  Hi, is it possible to change the names of files that export out of indesign while packing?

  For example, I can change the "Font of the Document" folder to export as a "document-fonts"?

  I ask because our naming structure requires without capital letters and no spaces. Spaces are replaced by dashes (-).

  And it would be nice if it was always exported as needed, instead of having to go back and change the names of files.

  Thank you! Much appreciated!

  Which cannot be changed without having a bad effect,. The name "Document fonts" is special. When you compress a file with fonts in a folder using exactly this name, InDesign know that these policies should be open and will be used in the document to the other end. If you name this file anything else, InDesign ignore fonts and the recipient will have to open the fonts manually.

  If you have decided to change the folder names, you will need to do once the package created, perhaps with a script.