Size to minimize and restore window

Similar Questions

• After backup files and restoring Windows XP, I can't open the files backed up.

  After backup files and restoring Windows XP, I can't open the files backed up. The files are password on a user account. I know the password. But the message received when you try to open them is: access is denied. Drag / drop the files in 'Shared files' result in the same message. I know that the files exist, because when I open backup and browse for them, they are displayed. Is there a method to open? I have Windows XP Media Center Edition, Version 2002, Service Pack 3 update. I tried to back up the files with backup of backup, but it does not work.

  Hi error,.

  I suggest you follow the article in the Microsoft Knowledge Base and check.

  How to capture a file or a folder in Windows XP

  http://support.Microsoft.com/kb/308421

  I hope this helps.

• Satellite P750/P755 - backup and restore Windows 7

  Hello

  My hard drive is about to fail on my Windows 7 Satellite P750; I get warnings of impending failure for a month now. I bought a hard drive again, and he's ready to go, but I am unable to create a backup and restore point. I get an error message 0 x 81000037: "snapshots of files cannot be read.

  Let me give you a part of the history of my machine before we get to the question. Windows 7 is pre-installed on this machine. A year ago, I created a new partition and installed Linux. Linux then took over the responsibilities of the boot. A couple of weeks, I deleted the Linux partition. This gave me a problem because the computer could not start. Fortunately I had recently created a return upwards and the restore point, and during the process, I was asked if I wanted to create a Windows 7 Home Premium repair disc. I could use this CD to access a command line tool that makes the new bootable machine.

  However, I have more a hidden on my machine boot partition (at least according to the disk management snap-in I'm not). Now, I get the above error when I try to create a new backup and restore point. I don't have a copy of the previous backup and restore point (I deleted it to make room for a new).

  From my research, apparently, one of the possible causes of the error 0 x 81000037 is related to the size of the hidden boot partition. Because I do not have the hidden boot partition I fear this could be the cause.

  There are other possible causes of this error. For example, a virus that the antivirus refuses to give access to during the back up and restore the partition, and junction points in to save readers who are the mounted volumes. I ran a full scan on my computer and cannot find any threats. I checked my junction points (which are a bit) and none are mounted drives.

  This brings me to suspect that the lack of a boot partition is the problem. I saw in the forums of some suggest it is better to back up all my data in the traditional way (already done, since you ask), install the new drive to hard and then reinstall Windows 7.

  So eventually, we get to my question!

  Windows 7 is installed on my machine, I think that I don't have the disks to reinstall on a new hard drive. Is this correct? I am able to get a copy?

  To be honest, I wouldn't reinstall Windows on a hard disk again, rather than using a return to the top of the spirit and point of restoration. I have a LOT of programs and rubbish that have accumulated in it in the (almost) last 3 years.

  Thank you for your patience. If there are some details that might be useful, but I left out (I'm sure there is) please let me know.

  > I think Windows 7 is installed on my machine, that I don't have the disks to reinstall on a new hard drive. Is this correct? I am able to get a copy?

  You have not all discs because Toshiba provides clean recovery disc creator software which is always pre-installed on new laptop computers.
  This recovery disk tool or support of creator creates the recovery disk that can be used to recover the laptop.

  It was a big mistake not to create this disk, however, you have the possibility to order this disc here:
  http://backupmedia.Toshiba.EU/landing.aspx

• Error 1706 and restore Windows to previous state

  I have a 1706 error regarding a photo program pre-installed on my computer Dell in 2006.

  Search on the site Web of the seller said to find a particular .msi file and run the installation program that him, but a search of my computer files shows that I do not have this file.

  I searched the Internet and somewhere it was proposed to restore Windows to a previous state.  But when I do that, I get a message that the restore has not been made, and no changes have been made to my computer.

  I ran a registry repair, but that did not help.

  I have 2 separate problems here?  A Setup error AND a computer restore the question?  Or are they related in some way?

  You won't get any early responses constantly asking the same question (4 times in 4 minutes).

  I suggested that as a first step, you use the function "UNDO" - if available - in the program that you used to do the repair 'Register' and then uninstall and throw this program.  See http://chris.pirillo.com/are-registry-cleaners-safe-to-use/ , http://www.edbott.com/weblog/2005/04/why-i-don ' t-use - Registry cleaners / and http://support.microsoft.com/kb/2563254

  It seems that if you attempt to uninstall (or perhaps fix) an application program.  The MSI file is the Microsoft Installer file used to install the application in the first place.  The same file is also used to uninstall or repair the installation.  If this file was deleted a long time ago (or maybe even never present in the disk image of Dell that was used for the manufacture of your computer), System Restore won't help (don't).  System Restore is not a panacea.

  The usual method to solve problems in uninstalling applications is to install the application (which is to replace the missing msi file) again and then uninstall it.  Unfortunately, this does not work in all situations because some applications refuse to install if the old version is still present.  There are alternative methods - if uninstalling the app, that's what you try to do.

  It is possible that if you explain what you are trying to accomplish, someone may be able to provide a suggestion.

  To increase the probability of getting help, please provide the full text of the error message, and the name and version of the photo program.  Also, please provide the version of Windows you have, including the service pack (click right my computer and select properties for this info).  Because you have a Dell, provide your Number of Service Dell could also help.

• Backup and restore - Windows 7

  Apology, long story - cannot shorten it, otherwise I'll think I forgot something.

  I just rebuilt my PC, reinstalled Win 7 on a SSD and restored everything (or so I thought) all my data on a separate HARD disk.

  When I look at the data I find loads of it is missing. I'm afraid I don't know the reason but want someone more competent than me confirm my fears, or better yet, tell me differently!

  Before getting the SSD, I got a 1 TB disk partitioned in C: for windows and programs, as well as the d: for data. The data were vast dating back to the years whose number of Paperport files.  There's always a curiosity, perhaps caused by transfer of data between several computers and HARD drives older over the years, I could never "see" all of my My Documents Paperport files, but only by going to desktop (or Windows Explorer) and open D: > users and then my user name. will in this case showed my a whole much fuller of the files and folders to go through My Documents. I don't think it was to do with me do not include them in the library because I believe that I had added things to the library as he was transferred, but I could be wrong.

  I think that it is possible that I had managed to create two sets of users, possibly by copying my Windows XP user account and the game 'full' of files (including all my Paperport documents) was not really visible to my 'real' user account in Windows 7.

  I always kept backups (including Images of the system) using Windows backup on the external (USB) 1 TB HARD drive. (G)

  I created originally the SSD by cloning my C: partition to the new SSD. (I've always built my own PC and Windows 7 on the HARD drive was an OEM installation and I had no right, then disks). It worked well, but I've always had a message on startup asking to choose the "Recovered" version I wanted to start. (It is possible that during cloning, I managed to install windows twice).

  I finally decided to put things away to the top (and I had gotten my Win 7 discs at hand). I did a complete (so I thought) backup of my C: and D: drives on a brand new 1 TB HDD internal (e) I had installed as the old USB has been slow (and complete) in case anything went wrong. I had installed a new, pure on the SSD and then (stupidly in retrospect) re-partitioned disk HARD original 1 TB in a single partition D: and "restored" the data from the new E: drive on the re-partitioned D: drive and put all Windows sites to point to the drive D: for My Documents etc. That's when I found that all the stuff that I previously had access via the workstation > users > Stuart was missing. (Why oh why didn't I just use the new E:drive as the data Windows drive and copy the stuff up drive D: when I saw all this and work!)

  OK I though all is not lost - I have the original backup to disk USB g: so I restored from there. Same no result - no files Paperport, nothing of what I used to have access via my computer > users > Stuart.

  So no data only backup Windows 'official' user account backup and ignore anything else on the D: drive? Was I wrong my backups? Are my data hidden somewhere that maybe a full restore of the system of the E:drive be recovered? I don't think, but I hope.

  Advice, suggestions, commiserations welcome.

  Hi Stuart,

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  As I understand it, the problem with the backup of the data on the system.

  Of course, I understand the concern.

  I suggest refer you to the articles below and check if that helps.

  Backup and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows/back-up-restore-FAQ#1TC=Windows-7

  Restore files from a backup

  http://Windows.Microsoft.com/en-us/Windows/restore-files-backup#1TC=Windows-7

  Note: The article above will help you restore backed up version of the files that are lost, damaged, or changed accidentally. You can also restore files individual, groups of files, or all files that you have saved.

  Recovery and data backup

  https://msdn.Microsoft.com/en-us/library/bb727010.aspx?f=255&MSPPError=-2147217396

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• error message from backup and restore Windows 7.

  Original title: ronen b.

  I can't use the backup and restore application on windows 7.

  When I opened this feature it gives me just the header of the "backup and restore" but not the full application.

  When I try to restore from a back to the top, I get the message "the backup application could not start due to an internal error. the service cannot be started because it is disabled or because it has no enabled devices associated with it. 0 x 80070422. »

  It could happened after I run the registry cleaner ccleaner but I'm not sure.

  Best regards

  Ronen

  Hello Ronen,

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you are getting an error code.

  I suggest you to refer to suggestions from John Rubdy Moderator Forum Microsoft responded on April 12, 2010 and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/backup-aborts-with-error-code-0x80070422/639e2b91-0d65-40E0-Aed4-7d8bffd6609b

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Backup and restore windows 7 on a lot of laptops

  Hi all

  I got 3 new laptops with the same model and I had to install Windows 7 on it.
  I installed Windows 7 + drivers and software on the first and I backed up using the backup and restore tool in Windows 7 and I restore on two other laptops.
  1 - How can I change the license for the other 2 laptops and provide new licenses for it.
  2 is what I myself cause problems especially if the computers are on the network. I think that the 3 laptops now have the same Setup ID and I don't use sysprep to all. Any help or suggestion please?

  If all three portable computers are the same exact model, you can use one of the machines and use it as a reference machine, install Windows 7, drivers, apps, set up the way you like, create a system image and restore on the other machines.

  When you are restoring, you will need to do the following:

  -Change the name of the computer

  -Set up the unique product key (so each machine should have its own product key).

  Click Start, right click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click on the link 'change product key '.

  Enter the product key, click Next to activate via the Internet.

• frequent and repeating the minimization and Mazimizing (full screen) all the minimizable and mazimizable windows

  I am using windows 7 ultimate, Microsoft security essentials too to protect my pc. I meet a continuing minimization and mazimizing on every I open windows Explorer.  not only that, but also to repeat. It also happens to all my media players and browsers. It's really disturbing it happenes all five as five minutes. and it continues for three minutes. pls help

   Start here - https://support.microsoftsecurityessentials.com/ and select the link that says - I think my computer is infected. Options vary by region, but phone support leads you to the Microsoft answer service (http://www.answerdesk.com/) in the USA at this time. After an initial free consultation, will be charged a fee for assistance, based on the details of the case.

  You can also try this web site - http://www.bleepingcomputer.com - contains details for most common infections, often immediately after that they started to appear in the wild, and instructions are provided for how to remove infections using their malware removal guides. They also have forums where you can seek assistance from people who specialize in the removal of malware.

  Here are other free programs that can help:

  Free Malwarebytes - http://www.malwarebytes.org/products/malwarebytes_free Please note: the offer final installation dialog box an option pre-selected to install Pro trial version. To install the free version, you must uncheck this option.

  SUPERAntiSpyware Free - http://www.superantispyware.com/downloadfile.html?productid=superantispywarefree

  TDSSKiller (free) - http://support.kaspersky.com/faq/?qid=208283363

  HitmanPro (free for 30 days) - http://www.surfright.nl/en/hitmanpro

• 8 64-bit Windows minimize and maximize Windows Windows

  We have upgraded to Windows 8 64-bit and labview 12 64-bit here at work.

  One of the programs that I wrote with an example that I found on the OR on board is no longer works.

  We used to have windows XP 32-bit.

  I used to be able to give a name of window such as Notepad (or any window of Windows) and I was able to minimize or maximize it as needed.

  So once we have upgraded to Windows 8 and Labview 12 64 bit is no longer works.

  Someone at - there an example I can look at who will work with Labview 12 64 bit?

  Thank you Rick.

  I went into Windows 8 and adjust the properties of my program.

  Now, he is running in compatibility mode with Windows XP.

  It works without any problem.

  I guess that sometimes the simple answers are the best.

• Backup and restore Windows Mail on Vista

  Hello! Need to backup data from Windows Mail (Vista), and then restore it after the operating system has been reinstalled. How to do this. Have searched this forum and Technet, and I guess that's not as simple as I had hoped. Help! My niece needs his laptop yesterday!

  You can use File transfer Windows to transfer your e-mail on an external device information.

  See the following article:
  http://support.Microsoft.com/kb/928634

  You probably want to use method 3 or 4.

  1. Look for the removable media or the network drive that contains the Windows Easy Transfer Wizard files, and then double-click Migwiz.exe to start Windows Easy Transfer.
  2. If you run other programs, you need to close these programs. You can save your work in each program, and then close the programs individually. You can also click Close all in Windows Easy Transfer to close these programs immediately.
  3. Click Next.
  4. Determine and then appropriate removable transfer media click on CD or other removable media, such as a flash drive.
  5. Click on a network drive to save the files and settings to a folder that is located on the removable drive.
  6. Where do you want to save your files, type the path to a folder on the removable drive, and then click Next.
  7. Click everything - all accounts of users, files and settings (recommended) to migrate all files and settings. If you want to determine exactly the files and settings you want to migrate, click only my user account, files, and program settings, or click Customize.
  8. The list that contains the files and settings you want to migrate, and then click Start. To add or remove files or settings from the list, click Customize.
  9. Once Windows Easy Transfer complete migration of files and settings, click Close.
  10. Connect the removable media to the destination computer.
  11. Start Windows Easy Transfer, and then click Next.
  12. Click on continue a transfer in progress.
  13. In where did you copy your files, click on removable media. If the removable media option is unavailable, click network drive, and then click Next.
  14. In locate your files, type the path where you saved the files and settings. You can also click Browse to locate the files and the settings. After you have located the files and settings, click Next.
  15. Select the user on the destination computer names that match the usernames on the source computer. If there is not any user account is created on the destination computer, you may need to create new accounts. To create an account on the local computer, type a user name directly. To create a profile or a domain user, type a user name to the following format: domain\username.
  16. In choose the drives for files on your new computer, select the destination for each drive source drive.
  17. The list that contains the files and settings you want to migrate, and then click Start. To add or remove files or settings from the list, click Customize.
  18. Once Windows Easy Transfer complete migration of files and settings, click Close.

  Please let us know if it works for you.

  Theresa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• back up and restore Windows Vista Home Basic - reverse did not, access is denied. (0x80070005)

  I tried for months to the opportunity to make a return to the top and I keep getting reminders to do, but the message above is what I get AFTER it went through the whole process.  I have an external hard drive that I have chosen as the backup location.

  Hello

  make backups on an external hard drive or DVD

  see if this information helps you

  How to make a backup of your data (all Vista versions)

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  If you have problems with the repost of process above in forum microsoft link that is specific to the backup below questions

  "This forum supports questions for the default backup utility in Windows Vista, Server 2008 and beyond."

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• How can I remove windows 10 and restore windows 7 more than 30 days after the upgrade to 10? In addition, can't find my key code... former system

  Since more than 30 days, I upgraded to windows 10 and I would LOVE to go back to windows 7.  Have no idea where my product key could be.

  http://Windows.Microsoft.com/en-AU/Windows-10/Windows-10-recovery-options

  Check if you can restore your PC to factory settings. This reinstall the version of Windows on your PC and remove your files personal, applications and drivers that you have installed, and any changes made to the settings. Go to settings > Update & security > Recovery > reset this PC > start and seek to restore factory settings.

  Discussions:

  1. http://answers.microsoft.com/en-us/insider/wiki/insider_wintp-insider_install/how-to-reinstall-or-restore-your-original-windows/b6649955-f8d3-4c0c-94ca-e4a5b5e06c60

  2. http://answers.microsoft.com/en-us/windows/forum/windows_10-win_upgrade/revert-to-previous-version/cce5dfd1-8979-4134-92ad-a74cb76a4cc1

• Cannot perform a backup with Backup and Restore (Windows 7) error 0 x 8100019

  I was able to run a backup on one of my other external hard drives-, but he did not have a sufficient space to manage the size of the backup that I specified. I recently bought a 3 TB hard drive to store a backup copy of my 1 TB hard drive Dell XPS 8300, and now I get error 0 x 8100019. I'm not the most technically inclined, reading in the nets of the past is like trying to read Sanskrit. I wonder if anyone has found a definitive solution to this problem, given that most of the answers seem to contradict one another?

  Hello IanGC,

  Look at the thread below to help with the backup error 0 x 8100019:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/error-code-0x81000019-when-trying-to-run-backup/f82e9738-21cb-4801-AB14-9df74a17ab29

  It is a solution that is useful. Please let us know if that helps in your situation.

  Thank you

  Marilyn

• Mac: increase the size of file and inbox windows to see better. Theme-police-size-changer.

  I am trying to increase the font size, records and the components of the Inbox for better viewing. I can increase the font of message via view > Zoom, but how to zoom the other components?

  https://addons.Mozilla.org/en-us/Thunderbird/addon/theme-font-size-changer/

• Windows 7 backup and restore error (0 x 80030002)

  Backup and restore Windows 7 shows the following error message after I start a backup:

  An internal error has occurred

  %1 could not be found. (0 x 80030002)

  The problem occurs only with my user account; other people who use the computer do not receive the message.

  How can I get the message to go away and view the progress of backup instead?

  Hello Zian,

  I would like to know some information about the problem so that we can help you better.

  You made any hardware or software changes on your computer before the show?

  Thank you for details on the issue.

  I also know that the inconvenience that you are experiencing because of the backup and restore the question. I will definitely help you.

  This problem can occur because of corruption backup and restore settings.

  I suggest using the steps described in the following articles and check if it helps.
  Reference:
  https://support.Microsoft.com/en-us/KB/979281
  https://support.Microsoft.com/en-us/KB/973455

  I hope this information helps.

  Please let us know if you need more help.

  Thank you