Skip items that overlap

Similar Questions

• State of the mouse with menu items that overlap control

  Hello

  I have a problem with the recovery of the location of the mouse using GetGraphCoordsFromPoint...

  I use the return status of GetGraphCoordsFromPoint to determine if the mouse cursor is over the plot of my graph control area (1) or not (0) to switch between styles of mouse (VAL_DEFAULT_CURSOR against VAL_CROSS_HAIR_CURSOR).

  It works in most cases...

  Above the Panel, there is a bar menu, located below is the xy graph. Now, if the mouse opens a menu and is the style of mouse on the menu (and also on the chart) depends on history of mouse:

  If the mouse has always been above the menu, it is not recognized by GetGraphCoordsFromPoint be loacted in the graph - which is what I would like to see, in this case of the style of the cursor is always the default style.

  Now, if the mouse leaves the menu for a short distance, the menu does not disappear (only if the mouse is to a greater distance) and acccordingly GetGraphCoordsFromPoint realizes that the mouse is over the chart. It is correct and as expected, too. (the style of the mouse is replaced by a sight then)

  Now, if I move the mouse over the menu, it is not recognized by GetGraphCoordsFromPoint, unfortunately, and the style of the mouse is not being in default.

  Am I missing something, or is there a way to fix this behavior? Styles different from the mouse on a menu is confusing for the user, and I would avoid it, of course

  Thank you...

  Hi Wolfgang,.

  It is not a very good way to work around this problem. As you found, Panel moving events are sent to the callback of the Committee even a menu is followed, and when you change the cursor of the mouse that it also affects any menu that can be active at a time.

  If the cursor changes do not at all while the menu is active, even if the user moves on the graph, there is a possible strategy don't mind you can pursue to remedy the situation. It consists of trying to detect if a menu is active, so that you do not change the cursor when the menu is active. Unfortunately, this is easier said than done. Although it is easy to be notified whenever a new menu is activated (via a menu drive recall) there is no right way to be notified when the menu disappears. And there are several ways in which it can disappear. So it is not possible to set an internal flag that tracks when the menu is active.

  However, it is possible to know if the menu is active at the time you receive the Panel move event (or in the timer tick event, although I'm not completely sure why you also use a timer). You can't do it with the UI CVI library, but you can, using the Windows SDK, in a way a little round point.

  The idea is to know which window is the top-level window. And if she is not the window of the Control Panel, then you should be able to assume that a menu is active and therefore refrain from changing the cursor. Note that you must also make sure that the active window belongs to your process, because there could be a number any other windows that might be the 'top' window at any time. But if it belongs to your process and it is not your Panel, then presumably it's the menu.

  I did a quick test with the following code and it seems to work, although you might want to test more thoroughly I did:

  topHwnd = GetTopWindow (NULL);
  GetWindowModuleFileName (topHwnd, topHwndModule, MAX_PATHNAME_LEN);

  GetPanelAttribute (Panel, ATTR_SYSTEM_WINDOW_HANDLE, (intptr_t *) & panelHwnd);
  GetWindowModuleFileName (panelHwnd, panelHwndModule, MAX_PATHNAME_LEN);

  If (! strcmp (topHwndModule, panelHwndModule) & panelHwnd! = topHwnd)
  return 0; do not change the cursor, unless the Panel is really on top

  Good luck

  Luis

• Settings of records that overlap do not work

  When I call my settings of the duplication of records, they are all "replace". I choose another option in the menus, but they do not. I can not any setting other than "replace". This is true for MIDI and Audio settings.

  Everything else in the dialog box (boxes and count the settings seem to work well. Does anyone else have this problem? I tried to restart my computer and logic, without success. I'm running Logic Pro X 10.2.3 on an iMac 27 "mid-2011.

  Any ideas? Really miss me my records to take.

  OK, set it to 'Create a folder take' to create a folder to take.

  Overlap simply writes a new region that overlaps exist areas, it does not have a folder to take.

  http://help.Apple.com/LogicPro/Mac/10.2.3/#/lgcpbc10f1ea

• How to select and move more than one bookmark at a time? Shift + click selects multiple items that are next to each other in a list, because the element

  How to select and move more than one bookmark at a time?
  Shift + click selects multiple items that are next to each other in a list, because the items open in firefox before that happens.

  Glad it worked for you. Thanks for posting back.

• Y at - it somewhere I can find a list of items that is supposed to be running in activity monitor and those that should raise red flags?  I know the list varies depending on the applications and installed process but a base line would be nice

  Y at - it somewhere that I can find a list of explanations or definitions of applications that are running in the monitor of activity as well as a list of items that should raise red flags?  I realize account from the list will vary depending on the applications and programs installed and running, but it would be nice to have a base line of what should be expected and considered safe or normal.  There are too many items to research and one at a time.

  No, not so much.

  You have a problem you're trying to solve?

• I want to create a 2 cells in demand for numbers, the 1st cell is a dropdown menu with items of text, when choosing an item, that it would be represented by a numeric value in the other cell. How can I do?

  I want to create a 2 cells in demand for numbers, the 1st cell is a dropdown menu with items of text, when choosing an item, that it would be represented by a numeric value in the other cell. How can I do?

  You can use vlookup() like this:

  (1) crate a table like this:

  the first line is a heading row

  the first column contains the same list of items in the context menu

  the second column contains the corresponding values

  name of the table 'value '.

  

  In another table (where the pop-up menu), you can use the table of choice of 'Value' like this:

  

  create a drop-down list in cell B1

  Select cell C1 and type (or copy and paste) the formula:

  = VLOOKUP (B1, Value::A:B, 2, 0)

  short hand for this is:

  C1 = VLOOKUP (B1, Value::A:B, 2, 0)

  now change the pop-up to display the value in the change of cell C1

• Remove particles that overlap?

  I'm looking for an effective way remove the my binary image that overlap.

  Image 1 is the current seuillee image

  Image 2 are the particles that are bad

  Image 3 is the combination of image 1 and image 2

  I want to remove particles that are 'overlap '.

  Effective ideas?

  Thank you

  Branson

  PS Images are in binary form, you must open in IMAQ to see.

  Red = binary value 1

  Green = binary value 2

  Blue = binary value 3

  

  Hello

  I guess you try to do a binary reconstruction, have a look at the Reconstruction of binary morphology IMAQ: http://zone.ni.com/reference/en-XX/help/370281P-01/imaqvision/imaq_binarymorphology_reconstruction/

  Stimulate the function with your 'bad image' as a brand.

  Hope this helps

  Concerning

• Replace from the Clipboard, or "connect the wires that overlap?

  I'll go by many of my first diagrams and clean code

  with things I've learned since I started using Labview.  A lot of this involves deleting

  objects, then copy/paste of a conception of good reference in the old design.   However,.

  This often leaves a large number of broken wires to clean.    For example, where I had individual

  enumerations that are used in the design, I am replacing them with typedef enumerations.

  (I couldn't typedef controls to appear in my palette of functions, but it is a question

  for another post)

  As it seems to be my only choice ' replace-> select a VI-> [file .llb]->-> [OK] typedef.

  or remove the old one, paste a new, ctrl-B and rewire.  This second option seems

  to go faster than the first.  But in both cases, there is a lot of click and drag to replace a

  control, and there are dozens of them to do.

  Therefore the routing of the wires is the same, but it takes time to connect them all back.

  Is it possible to tell LV "re - connect the broken wires that overlap the pins."

  overall or in a given area?

  Or y at - it a way to simply "replace from the Clipboard?

  Thank you and best regards,

  -- J.

  If you do a find > anyway, the dialog box that opens has a button replace.  After selecting the replacement, one of the options is to replace all.  This should save time if you have multiple copies of the original constants or controls made from the control.

  Lynn

• Error: "Windows Media Player cannot find the file. If you try to play, burn, or sync an item that is in your library, the element can point to a file that has been moved, renamed or deleted'

  Original title: laptop won't read the music files stored on external hard drive

  I have an old Compaq laptop Windows XP, so it was out of memory I transferred everything on a Portable Seagate (500 GB) hard drive and started to access it. It's worked well for over a year, but lately, began to stop playing my music files. Absolutely everything on the hard drive opens, however, images, files and folders, but when I go into Windows Media Player, it pops up with this error message:

  Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted.
  I have not modified parameters or anything that moved. I used to be just able to restart the laptop, or disconnect and reconnect the hard drive and it works again, but now it or not will be not at all, or it will cut off half way through a song and then not to play anything more.
  I can't find any support for this problem because the phone reads that the hard drive is there, and everything else works. Only the music doesn't. I tried to play music on a connected USB and it works fine. I'm so confused!
  Hi lkm0293,
   
  Here are some articles that you might find useful:

  Windows Media Player Error Message help

   

  Error message when you type the name of a file to play with Windows Media Player: "Cannot open file."

• Error - Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted.

  Original title: my Media Player will not play the majority of my music files.
   
  Here's what he said
  "Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted. »

  There has been NO change to my other computer from so NY to AZ I have an internal but also external hard drive and I have so many files that I don't have the disks more and I don't want to lose them.  Any help will be greatly appreciated, thank you.

  Hi David,

  What version of Windows Media Player do you use?

  If you use Windows Media Player 11, you can follow the steps in this link & check if the problem persists.

  You cannot view, add, or delete items in the library of Windows Media Player 11

  
  Reference: error message when you type the name of a file to play with Windows Media Player: 'Cannot open file'

  Hope the helps of information.
  Please post back and we do know.

• Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted.

  Lately I get the following message if poster every time that someone sends me an email with an attachment. I use to be able to display up to a few weeks before. the message is - Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted.

  Does anyone have an idea on how I can display these attachments?

  Thanks for your help.

  Hi fredleon,

  · What is the email client or webmail you are using?

  · What is the attachment file extension?

  · How do you open the attachment?

  · Is it by double-clicking or you choose open with option.

  a. save the attachment to the office,

  b. right-click on the file and select open with the option to open the attachment according to their file extension.

  Example: If the .docx file extension, then it is word document or .pdf, it's Adobe.

  You can get the extension of a file by right clicking on the file and go to properties

  With regard to:

  Samhrutha G S - Microsoft technical support.

• Item that this shortcut refers has been changed or moved

  Can I install a game on my other laptop and even though it has all the icons it will give an error when I try to play "item that this shortcut refers has been changed or moved" when I know that it is not.  I am at a loss to know why. There was no upgrade or what it's done for her.  I have laptop and games and programs work very good about it.

  Hi gearbrain,

  It's happening to all the applications installed on your computer?

  You can try again to create a shortcut and check if it works.

  This problem occurs because of a Microsoft Windows function that does not structure memory shortened correctly if the shortcut (.lnk file) has a goal less of 14 characters.

  To work around this problem, set the shortcut read-only. To do this, follow these steps:
  1. right click on the shortcut and then click Properties.
  2. click on the general tab.
  3. Click to select the read-only check box, and then click OK.
  Check whether the problem is resolved.

  You can try to create the new user account by following the instructions in the link below and check if it works.

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• I want to create a shortcut to the my Bank sign in page Web site, but there is no menu item that says: "create shortcut".

  I want to create a shortcut to the my Bank sign in page Web site, but there is no menu item that says: "create shortcut" when I right click... someone has any information as to why some sites don't work? I did several shortcuts to other web pages, such as the Caisse populaire and other banks on my desk.

  Thank you

  When you're at the page, save it as a favorite. Take the favorite and drag it to the desktop or the taskbar. Shortcut created.

• My startup list is who actually take each to start. How can I delete some items that do not need to be started

  My startup list is who actually take each to start. How can I delete some items that do not need to be started

  Hello

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured so that it starts automatically when
  your system boots and you connect. Autoruns also shows you the complete list of the registry
  and where applications can configure Auto-start for the files settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Anyone has an idea how to manually remove items that do not appear in the Collection, but take place on the device. Specifically, an audio book downloaded via Overdrive?

  Anyone has an idea how to manually remove items that do not appear in the Collection, but take place on the device.  Specifically, an audio book downloaded via Overdrive?

  Hello
  
  1. what type of files are in the audio book? Could you provide me with the file extensions?
   
  If you delete the information or files audio books could not show some information. I wouldn't recommend allows you to delete the files. If you want to remove them, you can contact overdrive support.
  
  Hope this information helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.