SKIP Procotol and Protocol-groups of objects

Similar Questions

• Something similar to groups of objects, but for the ports? (must be used on an ACL)

  Hello community!

  I'm fairly new, when it comes to firewalls, but I have some experience with routers and switches, so I'm not completely lost.

  Practically, we all know that a group object is a large bucket to throw things and then managing them as a single group, which is very useful for many reasons... so is there something similar that we can use in an ACL for the port?

  Say so, let that I want to allow the following ports:

  • 80
  • 443
  • 25
  • 30500
  • 20500
  • 8080
  • 14600
  • 21
  • 753
  • 22

  And instead of doing something like this:

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 80

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 443

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 25

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 30500

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 20500

  access-list extended dmz_access_in permit tcp host WEB host WEB-EXT eq 8080

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 14600

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 21

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 753

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 22

  do something like:

  dmz_access_in list extended access permit tcp host WEB host WEB-EXT eq PORT_LIST1

  Thank you!!

  PD: Excuse me if some port above are not TCP, if just one example. I just start typing all the numbers that came to my head.

  Hey Rolando,

  On a SAA, you can combine services and protocols based on the source/destination in an object-group service oriented. Your example would look like this:

   object-group service PORT_LIST1 service-object tcp destination range 21 22 service-object tcp destination eq 25 service-object tcp destination eq 80 service-object tcp destination eq 443 service-object tcp destination eq 753 service-object tcp destination eq 8080 service-object tcp-udp destination eq 14600 service-object tcp destination eq 20500 service-object tcp destination eq 30500

  You can create also integrate groups:

   object-group service WEB_PORTS service-object tcp destination eq 80 service-object tcp destination eq 443 object-group service PORT_LIST1 group-object WEB_PORTS service-object ...

  This type of group is going where the Protocol is specified in the ACL:

   access-list dmz_access_in extended permit object-group PORT_LIST1 object HOST object EXT-WEB

• AnyConnect tunnel-group automatic assignment without selecting any group-tunnel-group-list alias and user-group strategy.

  Objective is that the anyconnect user must select group-alias, so that when a user enters his username and password he must go to his political group and tunnel-group specific. as I removed this command in webvpn 'no tunnel-group-list don't enable '. This I can not connect (user does not authenticate).

  1 - my question is why his past does not?

  Solution:

  If I keep only a single tunnel-group by default and make several group policies and assign to each user with his specific group policy that it works. in user attribute means I have only question following the commands it works, but if I put "group-lock value test-tunnel" that it did not identify.

  Please explain why.

  WebVPN

  allow outside

  limit the cache-fs 50

  SVC disk0:/anyconnect-win-3.0.10055-k9.pkg 1 image

  enable SVC

  internal strategy of group test-gp

  attributes of the strategy of group test-gp

  VPN-tunnel-Protocol svc webvpn

  the address value test-pool pools

  username, password test test

  username test attributes

  VPN-tunnel-Protocol svc

  group-lock value test-tunnel

  Strategy Group-VPN-test-gp

  tunnel-group test-tunnel type remote access

  attributes global-tunnel-group test-tunnel

  Group Policy - by default-test-gp

  tunnel-group test-tunnel webvpn-attributes

  allow group-url https://192.168.168.2/test

  Yes, you have the right solution. You only need to create 1 group of tunnel and multiple group policy. Under the attribute of the user, you re then group policy of vpn that you want the user assigned too.

  You can also authenticate users against AD and configure ldap attribute map to map the user to a specific group policy automatically.

  Here is an example of configuration if you happen to have the AD and will authenticate against AD:

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00808d1a7c.shtml

  Hope that helps.

• Cannot map drives using Group Policy objects in Vista

  Hi all

  We strive map drives using Group Policy on our image of Vista. (In the past, we have used kixtart, but try to avoid writing scripts).

  The installer under User Preferences/Configuration/Windows Settings/Player cards of the GPO. Because the GPO is attached to the ORGANIZATIONAL unit that contains the Vista PC, we both loop processing market.

  Extensions side customer GP are installed on the workstation.

  The results are inconsistent - at best, if we use 'Create', 'Update', or 'Replace' as the action of the drive mapping.

  Sometimes, card readers, sometimes they are not. They just recently. Nothing is mentioned in one of the newspapers.

  All the world did this with success?

  Hi OxG,

  Thank you for visiting the Microsoft answers community site. The question you have posted is linked to the Group Policy object and would be better suited to the TechNet Discussion groups. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/category/windowsvistaitpro

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Group Policy Object Editor does not open in my computer it says that there is no

  Group Policy Object Editor does not open in my computer it says that there is not. I tried to open it by the command run 'GPEDIT. MSC' again, it did not open. IM usung windows vista 64-bit home edition. is this some kind of virus?
  Please answer as soon as possible

  It's the Vista, installation, modernization and the Forum to activate.

  You will get the best advice for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  See you soon. Mick Murphy - Microsoft partner

• Option of range & ASA 5510 - a group of objects

  Hello

  I have 3 ASA 5510 s; two of them are in production and the 3^rd is new. I inherited two in production and was trying to set up this 3^rd by using some of the existing network object-group statements.  The problem is that when I try to create a range of IP addresses in one of the groups of object; the range command is not available. One of the extracted statements from one of the ASAs production: network of the REMOTE object
  range 62.77.130.14 62.77.130.208

  The two ASAs have the same image of worm (asa842-k8).  Is there something I'm missing to enable the option in the range on the ASA News?

  Thanks in advance,

  ~ sK

  Hello

  Are you sure that the ASA News started the new 8.4 (2) software?

  There are

  • object-group network
    • accepts networks and addresses of host under it
  • network of the object
    • accept addresses from subnet, range and host under it

  Configuring "network object" came available in 8.3 software. Before that in the software 8.2 and earlier than the 'object-group network' (and other types of groups of objects") exist.

  Maybe you have several images start on the ASA News and its actually the old software still boot?

  What does the ' running shoe see the?

  If it lists both the command for old and new software then delete the old "system start" command, save the configuration and restart.

  I hope that the above information was useful

  -Jouni

• How to create a group of objects

  Hello

  I wonder if anyone can help me in the use of ObjectGroup because I found some documentation on this topic.

  The scenario is the following, I have a Persistable objects vector. And I want to add to the Group of objects. So what should I put in the "ObjectGroup.createGroup (?)", it is the purpose of peristable? or the vector itself?

  code snippet:

  store the final PersistentObject private;

  vector data private;

  public void addData (vector obj) {}

  synchronized (store) {}

  ObjectGroup.createGroup (obj);

  data.addElement (obj);

  Store.Commit ();

  }

  }

  Thank you very much!

  There is a "ObjectGrouping" example comes with JDE.

• Using the command telnet with groups of objects

  I'm upgrading from a PIX production to 6.2 (2) and will be converting the configuration to use the names and groups of objects.

  Documentation for the object-group deals with their use in ACLs, I wonder if they can also be used in the telnet command.

  Old config example:

  Telnet 10.0.0.0 255.0.0.0 inside

  Telnet 172.16.35.22 255.255.255.255 inside

  Telnet 172.16.35.23 255.255.255.255 inside

  Telnet 172.23.16.138 255.255.255.255 inside

  Telnet 172.23.16.141 255.255.255.255 inside

  Telnet 172.23.20.100 255.255.255.255 inside

  Telnet 172.23.20.101 255.255.255.255 inside

  Telnet timeout 10

  Example of config suggested:

  Telnet NET-Inside_10 255.0.0.0 inside

  Telnet-group of Support_TelecomTeam objects inside

  Telnet-group of Support_SecurityTeam objects inside

  Telnet-group of SNMP_Servers objects inside

  Telnet timeout 10

  Please let me know if you have tried with telnet that I don't have access to a laboratory PIX to test this option.

  Thank you!

  Jennifer

  Good idea, but unfortunately, groups of objects are valid for use in access lists.

  Scott

• Group and the Group of the United Nations

  Hi all

  I'm doing a code can select all the objects,text blocks and layers and then group them all the (CTRL + A) +(CTRL+G) , then I'll add more steps

  After that, I want to make a group of the United Nations again (CTRL + A) +(CTRL+SHIF+G)

  I try with this code but I see a few layers not selected and ungrouped, can anyone help please

  var doc = app.activeDocument;

  doc.selectObjectsOnActiveArtboard ();

  newGroup = app.activeDocument.groupItems.add ();

  for (a = app.activeDocument.layers [0].pageItems.length - 1; a > 0; a)

  {

  app.activeDocument.layers [0] .pageItems [a] .moveToBeginning (newGroup);

  }

  Thank you very much

  app.executeMenuCommand ("selectall");   (CTRL + A)

  app.executeMenuCommand ('group');   (CTRL + G)

  app.executeMenuCommand ('separate');  (CAPS + CTRL + G)

• Is there a way to get the list of hosts and its groups of belonging to the vCenter folder level in 5.5 web vsphere client plugin development?

  Hello

  I need to get the list of all hosts and its groups of belonging to the vcenter folder level.

  1. I created a view giving the extension point: vsphere.core.folder.monitorViews.

  2. After this step, I wrote the constraint as in my class of mediator,

  var ListConstraint:Constraint =

  QuerySpecUtil.createConstraintForRelationship ( _contextObject, 'childEntity');

  I was expecting a list of all child entities such as hosts, dc, cluster... But I have only the immediate child object which is only the Datacenter as my result.

  Is it possible to get all hosts and vCenter folder level Clusters because I need the entire list to vCenter (highest level).

  Other info:
  

  Object file has only two properties:

  1 childEntity - list of entities

  2 childType in-kind folder ('Virtual Machine', 'Data center'...)

  Is it possible to write a constraint specifying which list of childEntities I need using childType in.

  Example: Make Me childEntities that has a 'Host' and 'Cluster' childType but childType in doesn't have these two types.

  In addition, at this level, I could see the 'Associated objects' tab which has all the information I need, such as Clusters and Cluster tab hosts and host tab respectively.

  So, I think its possible to get this list to vCenter folder level.

  I have attached a screenshot representing the need. Kindly ignore the Conventions of naming in there since I edited the example comes with the sdk program.

  
  

  Query:

  1. How can I get the host and Cluster (table of relationship) list to vCenter folder level or even at the level of the vise.global.view?

  2. once I get this list, is it possible for me to manipulate that list and send the new list to IU?

  3. is there another way to do the same thing without the help of model classes and mediator?
  

  
  

  Pointers to this will be very useful.
  

  It is not possible to obtain all hosts a folder specific vCenter from a single query Data Manager.  You need to get the list of centers of data first and then get a list of data center hosts.

  It is best to make these repeated requests to the java level and return only the list that you want to the user interface.

  You can get all the objects in the host of the system with a simple query using a constraint with targetType = 'HostSystem', but you will need to eliminate those from other vCenter servers.  See how this chassis example queries all hosts the Java later in the getHosts() method: samples/chassis-app/chassisRackVSphere-service/src/main/java/com/vmware/samples/chassisRackVSphere/ChassisRackVSphereDataAdapter.java

  Another option is to use the vSphere Web Services SDK to browse vCenter. See the vSphere management forum for help on these APIs.  See this plugin of the sample using this SDK

  samples/vsphereviews/vsphere-wssdk-provider/src/main/java/com/vmware/samples/wssdkprovider/VmDataProviderImpl.java

• Adobe PDF Reader Plugin DC cannot disable with the ID of Group Policy object class

  Adobe PDF Reader Plugin DC cannot disable with the ID of Group Policy object class

  Our school district recently upgraded to Acrobat Reader DC - in the past, we have disabled the plugin IE via GPO for Internet Explorer - manage ad - ons with the class ID of the ad-on/plugin

  The class ID is the same on computers {CA8A9780-280D-11CF-A24D-444553540000}, and the object GPO is applied and turns off the plugin

  result with the new version - PDF opens in Internet explore - it is a problem for a lot of reason / especially we have many applications that require the full version and we have seen a lot of reports being pulled from IIS based sites that fail to print.

  It works if I disable the GPO and manually disable the plugin.

  That is the question

  Is there a way to disable the ad-on/plugin for IE centrally from an IT management perspective?

  While what you do must have worked, you can try these: create one of the following keys:

  1.

  [HKEY_CURRENT_USER\Software\Adobe\Acrobat Reader\15.0\Originals]

  "bBrowserIntegration" = DWORD: 00000000

  2.

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Ext\Settings\ {CA8A9780-280D-1 1See-A24D-444553540000}]

  (just to create the key is sufficient)

• Rotation at random one group of objects but binding at certain angles

  Hi all

  I'm looking to rotate a group of objects randomly, but limiting the rotation for just the right angles (90 °, 180 °, 270 °, 360 °).

  Is there a native way to do this? I don't think that there is - if there is a plugin that can do this?

  Thanks in advance!

  What you can do:

  There are random selection scripts that will choose randomly the existing objects.

  Selection of random items

  Then, there are replacement scripts that will replace the selected objects:

  Kelso cartography

  All you have to do is to have your loan of objects rotated made for replacement. Then randomly choose existing ones and replace.

  In this case to re-create the random objects is OK, try the ColliderScribe plugin, which has a mode of distribution. You can prepare a few objects and let the plugin distirbute them on a given area.

• How to get the default rotation tool locate the pivot point in the exact Center of an object or a group of objects?

  My new copy of the CC the default pivot set to one side, rather than at the center point. I know I can manually move the autour pivot point, but this is not always accurate. Is there a way to have HAVE determine exactly at the Center and then do this by default?

  Pivot the tool rotation default to the center of objects and the text box (frame). For text of Point, it is by default the anchor of the line base, and for a group of Point text objects, or multi-selction defaults to the geometric center of an invisible shape formed by the collective reference anchors.

  And you are right, that the setting of Center in the attributes Panel is not available for text of Point, single or multiple objects.

  I don't have an idea for your particular workflow needs, but if I really need to turn a group of objects text around its Center Point, I could do this:

  1. Select the group, and copy
  2. Paste in front
  3. Vectorize
  4. Select the converted objects and text objects group, then select the rotation tool and the pivot will be by default the Center (of the converted objects)
  5. After turning, remove the converted objects.

• How to add groups of objects to a form?

  I'm working on my forms on Linux, Oracle Builder Version 11.1.2.1.0.
  
  Now, I want to use the Webutil library. After plugging in the library on a form, I need to add the Webutil.olb to groups of form objects.
  
  The documentation says to do to drag the object file to the node groups of objects on the form. But I can't drag the file to a folder on the node.
  
  Actually drag all files to open in the form designer is not feasible in the Linux version.
  
  I also tried opening the Webutil.olb first, it appears under libraries of objects, click on the file and drag to the node of the form, did not work.
  
  Anyone know how to add the object to a form in Linux Version Oracle Builder?
  
  Thank you!

  frank1018 wrote:
  I'm working on my forms on Linux, Oracle Builder Version 11.1.2.1.0.

  Now, I want to use the Webutil library. After plugging in the library on a form, I need to add the Webutil.olb to groups of form objects.

  The documentation says to do to drag the object file to the node groups of objects on the form. But I can't drag the file to a folder on the node.

  Actually drag all files to open in the form designer is not feasible in the Linux version.

  I also tried opening the Webutil.olb first, it appears under libraries of objects, click on the file and drag to the node of the form, did not work.

  Anyone know how to add the object to a form in Linux Version Oracle Builder?

  Hi Frank,.
  Open webutil.olb
  Select groups of objects in the form builder and click Create
  now, select the (newly created) object group and go properties and make the subclass
  1. Select the object
  2. Select Module: WEBUTIL
  3. Select object name: WEBUTIL

  Now press ok and fact...

  Fix webutil.pll and you're done.

  I hope this works...

  Hamid

• Application of effects to the Group of objects in a floating frame - fail.

  Hi, I do not know if someone has encountered this... I have a group of images (rating music, so black on white in fact) in a floating frame.

  I have a textured background, and I want to knock out the white in the pictures to let the background show through. Effect of obscuring should work, and on "static" images (not in a scrolling frame), it is very good. But I tried to apply the effect to the framework itself; in the Group of objects; the individual objects. All the methods of good air in InDesign, but when previewing the content viewer, I can see the effect didn't, uh, indeed. This project is directed to iOS, and I'm assuming that the content viewer gives a fairly accurate glimpse?

  And I don't want to get into the clipping paths or alpha channels, but if there is a better way to knock out white, I would be very grateful for the entry. Screenshots show (left), InDesign Content Viewer (right). Thank you very much!

  

  transferred to DPS forum.

  Blend modes are not compatible between overlays and static content. You will need to re-think this or find a way to get this content to have a transparent background. Where did this come from?