Rotation at random one group of objects but binding at certain angles

Similar Questions

• Something similar to groups of objects, but for the ports? (must be used on an ACL)

  Hello community!

  I'm fairly new, when it comes to firewalls, but I have some experience with routers and switches, so I'm not completely lost.

  Practically, we all know that a group object is a large bucket to throw things and then managing them as a single group, which is very useful for many reasons... so is there something similar that we can use in an ACL for the port?

  Say so, let that I want to allow the following ports:

  • 80
  • 443
  • 25
  • 30500
  • 20500
  • 8080
  • 14600
  • 21
  • 753
  • 22

  And instead of doing something like this:

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 80

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 443

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 25

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 30500

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 20500

  access-list extended dmz_access_in permit tcp host WEB host WEB-EXT eq 8080

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 14600

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 21

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 753

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 22

  do something like:

  dmz_access_in list extended access permit tcp host WEB host WEB-EXT eq PORT_LIST1

  Thank you!!

  PD: Excuse me if some port above are not TCP, if just one example. I just start typing all the numbers that came to my head.

  Hey Rolando,

  On a SAA, you can combine services and protocols based on the source/destination in an object-group service oriented. Your example would look like this:

   object-group service PORT_LIST1 service-object tcp destination range 21 22 service-object tcp destination eq 25 service-object tcp destination eq 80 service-object tcp destination eq 443 service-object tcp destination eq 753 service-object tcp destination eq 8080 service-object tcp-udp destination eq 14600 service-object tcp destination eq 20500 service-object tcp destination eq 30500

  You can create also integrate groups:

   object-group service WEB_PORTS service-object tcp destination eq 80 service-object tcp destination eq 443 object-group service PORT_LIST1 group-object WEB_PORTS service-object ...

  This type of group is going where the Protocol is specified in the ACL:

   access-list dmz_access_in extended permit object-group PORT_LIST1 object HOST object EXT-WEB

• Unable to add objects to a groups of objects

  Hi all
  
  Hello, I created a group of objects, but I wasn't able to add objects to the group.
  
  I have create a pushbutton 3 just to test, but it is not a job
  
  so, any help would be appreciated.
  
  Thank you

  Hello, I created a group of objects, but I wasn't able to add objects to the group.

  I have create a pushbutton 3 just to test, but it is not a job

  You cannot add individual items to the block. You can add the entire block instead of points. And also even for paintings etc. but the trigger can be added individually no point level and block triggers.

  -Clément

• How to get the default rotation tool locate the pivot point in the exact Center of an object or a group of objects?

  My new copy of the CC the default pivot set to one side, rather than at the center point. I know I can manually move the autour pivot point, but this is not always accurate. Is there a way to have HAVE determine exactly at the Center and then do this by default?

  Pivot the tool rotation default to the center of objects and the text box (frame). For text of Point, it is by default the anchor of the line base, and for a group of Point text objects, or multi-selction defaults to the geometric center of an invisible shape formed by the collective reference anchors.

  And you are right, that the setting of Center in the attributes Panel is not available for text of Point, single or multiple objects.

  I don't have an idea for your particular workflow needs, but if I really need to turn a group of objects text around its Center Point, I could do this:

  1. Select the group, and copy
  2. Paste in front
  3. Vectorize
  4. Select the converted objects and text objects group, then select the rotation tool and the pivot will be by default the Center (of the converted objects)
  5. After turning, remove the converted objects.

• Change the opacity for group of objects on a single object, but not each other?

  I have a several simple objects of color filling all United over a context with a Uni fill object.  I want to reduce the opacity of objects on the object in the background.  However, my makeup of efforts the opacity of objects change on all other objects and I want to keep their strong colors.

  

  And it's the one with an opacity, but I want to stay solid on the other.

  

  Thank you

  Martin

  I've selected all the objects at the top of the page and click on the little circle thing circle in the layers palette and then adjust the opacity and it seems to work very well.

  It's because you have now applied the transparency of a layer setting. (When you clicked on the Meatball, you targeted layer, no not objects).

  You could have done the same thing by bringing TOGETHER actually what you call 'a group of objects' and by applying the transparency to the group setting, instead of to individual objects. (See why it is important to try to talk in terms of the program?)

  Always have the appearance Palette open so that you can always keep your eye on what Illustrator called the current selection. It will help you avoid a lot of confusion if you keep in mind, what kind of object (Path, group, layer) said Illustrator is selected.

  JET

• Unique gradient Annotator only appear when it is applied to a group of objects

  always impossible to get degraded Annotator to systematically display when I want that it?

  I have a group of objects, I want to adjust the gradient that runs through all objects in the group as a gradient, I created

  If I select the group with the Selection tool and then click on the gradient tool, I do not see the Annotator.

  If I select an object in the group with the direct Selection tool and then click gradient tool I see the Annotator, but when I adjust and rotate the Annotator it only affects this selected object 1.

  If I select all objects in the group by displacement by selecting them all one by one, and then choose the gradient tool, a whole bunch of gradients annotators appear for each object in the group, but none for the total group that I dragged through.

  I've already chosen, display/show degraded annotator

  so, basically, that I can't get the unique gradient Annotator that I dragged through multiple to show once again after objects dragging to adjust its position and to see the color stop, I can only redrag a new via the objects again.

  Maybe you can't do?

  The Annotator appears only on unique items. As you have discovered.

  Any attempt to get it to appear on a group of objects is futile. The reasoning behind this is that each object has its own gradient applied to it. If you had to choose a group of, oh, let's say 15 items, you would see 15 annotators and they would be cluttering the screen so that you would be unable to say where to edit. If all 15 objects had the same applied gradient, you would have 15 Annotators stacked on each other... do edit the 'group' pretty hard.

  The Annotator appears only when a single object (including the compound forms) is selected.

• Cannot map drives using Group Policy objects in Vista

  Hi all

  We strive map drives using Group Policy on our image of Vista. (In the past, we have used kixtart, but try to avoid writing scripts).

  The installer under User Preferences/Configuration/Windows Settings/Player cards of the GPO. Because the GPO is attached to the ORGANIZATIONAL unit that contains the Vista PC, we both loop processing market.

  Extensions side customer GP are installed on the workstation.

  The results are inconsistent - at best, if we use 'Create', 'Update', or 'Replace' as the action of the drive mapping.

  Sometimes, card readers, sometimes they are not. They just recently. Nothing is mentioned in one of the newspapers.

  All the world did this with success?

  Hi OxG,

  Thank you for visiting the Microsoft answers community site. The question you have posted is linked to the Group Policy object and would be better suited to the TechNet Discussion groups. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/category/windowsvistaitpro

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When im on firefox and try clicking on websites, I get several redirects, I think that its because of one of the extensions but I don't know how to check

  whenever I'm on firefox it starts randomly redirect me to other sites I think that its because of one of my extensions, but I do not know how to check or what is the origin of the problem please help

  Thank you fixed it

• Tab 'Users' lack of Group Policy Object Editor snap-in in MMC for - how to market?

  "I posted a similar question in the forum TechNet hereand I have proposed a solution - use support KB313222 -" ","How to restore the default security settings? " ;
  But it did not help me - stil I don't see 'Users' tab when you configure the snap "Group Policy Object Editor. How could I get this tab "lit"?

  Thank you.

  Also when I posted something similar but better described-> "how to apply Group/Local strategies to limited accounts (non-admins) only?"

• Option of range & ASA 5510 - a group of objects

  Hello

  I have 3 ASA 5510 s; two of them are in production and the 3^rd is new. I inherited two in production and was trying to set up this 3^rd by using some of the existing network object-group statements.  The problem is that when I try to create a range of IP addresses in one of the groups of object; the range command is not available. One of the extracted statements from one of the ASAs production: network of the REMOTE object
  range 62.77.130.14 62.77.130.208

  The two ASAs have the same image of worm (asa842-k8).  Is there something I'm missing to enable the option in the range on the ASA News?

  Thanks in advance,

  ~ sK

  Hello

  Are you sure that the ASA News started the new 8.4 (2) software?

  There are

  • object-group network
    • accepts networks and addresses of host under it
  • network of the object
    • accept addresses from subnet, range and host under it

  Configuring "network object" came available in 8.3 software. Before that in the software 8.2 and earlier than the 'object-group network' (and other types of groups of objects") exist.

  Maybe you have several images start on the ASA News and its actually the old software still boot?

  What does the ' running shoe see the?

  If it lists both the command for old and new software then delete the old "system start" command, save the configuration and restart.

  I hope that the above information was useful

  -Jouni

• Using the command telnet with groups of objects

  I'm upgrading from a PIX production to 6.2 (2) and will be converting the configuration to use the names and groups of objects.

  Documentation for the object-group deals with their use in ACLs, I wonder if they can also be used in the telnet command.

  Old config example:

  Telnet 10.0.0.0 255.0.0.0 inside

  Telnet 172.16.35.22 255.255.255.255 inside

  Telnet 172.16.35.23 255.255.255.255 inside

  Telnet 172.23.16.138 255.255.255.255 inside

  Telnet 172.23.16.141 255.255.255.255 inside

  Telnet 172.23.20.100 255.255.255.255 inside

  Telnet 172.23.20.101 255.255.255.255 inside

  Telnet timeout 10

  Example of config suggested:

  Telnet NET-Inside_10 255.0.0.0 inside

  Telnet-group of Support_TelecomTeam objects inside

  Telnet-group of Support_SecurityTeam objects inside

  Telnet-group of SNMP_Servers objects inside

  Telnet timeout 10

  Please let me know if you have tried with telnet that I don't have access to a laboratory PIX to test this option.

  Thank you!

  Jennifer

  Good idea, but unfortunately, groups of objects are valid for use in access lists.

  Scott

• I turn the layer in 3D (cylinder) object but no work appear on the object?

  Hey guys, I'm doing some 3D renders awhile and this worked very well, until one day the software just decided to not work well.

  I have one of my layers turned into a 3D cylinder object, but the work on the layer is not displayed on the object? Does anyone know why it does not work properly?

  Little help would be greatly appreciated.

  When Photoshop starts acting strangely try these one at a time and test your problem every change.

  First check all of your settings on the options bar

  Reset then all the tools

  Third Reset preferences.

• Adobe PDF Reader Plugin DC cannot disable with the ID of Group Policy object class

  Adobe PDF Reader Plugin DC cannot disable with the ID of Group Policy object class

  Our school district recently upgraded to Acrobat Reader DC - in the past, we have disabled the plugin IE via GPO for Internet Explorer - manage ad - ons with the class ID of the ad-on/plugin

  The class ID is the same on computers {CA8A9780-280D-11CF-A24D-444553540000}, and the object GPO is applied and turns off the plugin

  result with the new version - PDF opens in Internet explore - it is a problem for a lot of reason / especially we have many applications that require the full version and we have seen a lot of reports being pulled from IIS based sites that fail to print.

  It works if I disable the GPO and manually disable the plugin.

  That is the question

  Is there a way to disable the ad-on/plugin for IE centrally from an IT management perspective?

  While what you do must have worked, you can try these: create one of the following keys:

  1.

  [HKEY_CURRENT_USER\Software\Adobe\Acrobat Reader\15.0\Originals]

  "bBrowserIntegration" = DWORD: 00000000

  2.

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Ext\Settings\ {CA8A9780-280D-1 1See-A24D-444553540000}]

  (just to create the key is sufficient)

• You can move a drawing from one group to another?

  The new version so much my individual drawings in individual groups. How you group? I can see how you can move the order within a group, but cannot see how to move a picture from one group to the other.

  Looks like you can hold a drawing, and then drag to the next group. But you can't...

  Hi David,

  In Adobe Illustrator to draw, you can rearrange your individual sketches so that move to different groups.

  Check it out!

  Thank you

  -Kathleen

• Consider group, not objects in.

  I would like to take into account a group in illustrator, but not the object within the group, but the objects must reorganize to their new place.

  This can be done easily with few objects manually, but if you have thousands of objects. The work can be very frustrating.

  Is there a way to make this automatic?

  small example:

  Before after

  < < < < < < < < < <

  <                                             <

  < < < < < < < < < <

  <                                             <

  < < < < < < < < < <

  Boter,

  You can:

  (1) reflect the Group;

  (2) ClickDrag with the direct Selection tool so you touch/include all railways group and the object > transform > transform each > Reflect.

  You may be able to create a script/action to do so.