Skype cannot access the sound card

Similar Questions

• Skype cannot find my sound card

  Skype cannot find my Sound card - when I run the test of the Echo - it I heard say 'Hello' then it dies.

  I have a brand new Thinkpad (T420), Windows 7, internal camera and microphone, Windows loaded all drivers.

  I tried to find the communication helper.exe someone suggested, disable it - can't find it.

  I hope someone can help!

  Thank you-

  Sorry - it took me a while to get to try everything.

  I tried all that and it didn't work.  Then I found the 'Lenovo' tools/help - no matter what and let this process of updating everything, and now it works.  I'm guessing it drivers that needed to be updated, but I'll probably never know.

  I wonder now if I have to go back and "A" check that you have suggested, although it works.  It doesn't seem to be a good idea to allow applications to take control of my speakers and microphone - but I do not know!

  Thank you!

• In Windows NT Workstation 4.0, I get this error message: cannot find the sound card with this port number. Please check your settings and try again. Any help?

  There is this computer that I recently installed Windows NT Workstation 4.0 on and I would like to know how to install sound blaster 16, on this without receiving this error message. If someone wants to say how it is obsolete or install a new operating system, please do not post. Thank you. If anyone has the same issue on an ordinary pc or Virtual PC, you can publish. It is a computer. If you're going to say how microsoft does not support, I need to install a better operating system or the above mentioned inconvenience or something similar to those, please do not post. Any help will be appreciated. The specific sound card is Creative Labs sound blaster Pro 16 of 1.x.

  Hello Grant Heckel,

  Windows NT Workstation 4.0 is not supported in the Microsoft Answer forum.

  You can do a search on the internet and find information about the Sound Blaster Pro 16 and NT 4.0 Workstation.

  Such a thread is listed below:
  http://www.pcguru.plus.com/VirtualPC.html

  Sincerely,

  Marilyn

• tension of the sound card

  Hello I was wondering if there are examples that allow you to measure the voltage of a standard sound card?  or if not, if there is something that would allow me to do.

  Hi nick, maybe just acgraham trying to access his card CVI

  Normally, I consider that a data acquisition card is much more flexible than a sound card, which higher input voltage, a large number of modes of acquisition and examples and costs not so high (at least some of the inexpensive devices can be purchased as 6008, 6009). However, there is the possibility to access the sound card: you can read this discussion as an example.

• Cannot access the internet, gone wrong, Sys restore sound card unidentifired - now what is happening?

  I have PC with XP Pro SP3, worked fine for 3 years, now in the last 3 weeks, he's gone crazy mad.  All of a sudden I can't access broadband or dial-up internet (yes I have dial-up, sad again isn't, but it doesn't work now either). Tried system restore and it seems to have been disabled, it will not work when you click on it to start after a restore point has been selected. Suddenly the sound card does not either, even though I've played CD on the computer for 3 years without problem. Help!

  I think that this problem has appeared in 2008/2009 for other people, because there are several blogs that refer to him, but no one appears on any of these items with a solution.

  Anyone got any ideas? I use my laptop to send this message, but fortunately it works OK, the PC has absolutely no access to the internet at all. Help!

  Hi MalcomLowe.

  Click on Start, run on your keyboard and type "Winver" in the Run dialog box. Click on 'OK'. Take note of the information. Press the Windows logo +Pause/Break key, and take note of the information. After the two pieces of information here on this thread.

  Note: If the information generated by these two actions show that your type of processor is an intel no CPU (AMD), and that you do not have Windows XP SP3 installed, download and run these two files in the following order

  1.Update for Windows XP (KB953356)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=23751

  Reset

  2Windows XP SP3.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Ignore text on professionals computing and network facilities.

  Reset

  If none of the above applies to you, you can try the components reset Windows Update (manually) because you do not have the ability to get on the net.

  How can I reset the Windows Components update. (The automated fix solution X and refer to the manual steps) in the link.

  http://support.Microsoft.com/kb/971058

  1. do you receive error messages when you try to go on the internet?

  2. What is the exact text of the error message.

  3. click on Start, run, type "cmd" in the Run dialog box. Type of ' Ipconfig/all'. That said the information generated?

  When you say that you have done a system restore, what you mean exactly, and what steps have you taken to perform this task?

• Skype can't access my sound card!

  So I know what the problem is the cause and that's because I installed a game yesterday and when I removed it this problem due, "Skype can not access my sound card" then I tried to configure my pc to an earlier date when the game was still on my pc and it works again, but I removed the game today because I'm with her , so im guessing the installiation had something to do with my directx or something? I need help people! and oh ye my sound still working it's just my mic

  Uhm ye I fixed it lol

• No noise in the sound card of Nvidia GTX 550ti after Windows 8 plant

  Original title: since upgrading to Windows 8, Skype can not detect my sound card

  Now, it's not to say that my sound card does not work as it is certainly.  I have a card integrated sound with my Nvidia GTX 550ti I'm running two in SLI mode.  However, when I got windows 7 more earlier today, Skype detected sound card very well.  When I've upgraded to windows 8 afternoon program is no longer detected the sound card, but he DOES not see my headset Xbox 360 Wireless.  I've updated everything and double checked to make sure I have the latest drivers.  I uninstalled and then re installed Skype.  IM convinced that the problem is that something is Skype of BLOCKING access to the sound card.  However, it cannot be Norton 360 as it wasn't a problem before.

  That being said, it would be Windows Defender?  It is also a problem with Skype for windows 8.  So at least it seems to be a problem.

  Hey, the problem is now resolved.  Skype has released an update awhile back and it fixed the issue. I'm not sure where it was.

• Does not DETECT THE SOUND CARD / laptop INSPIRON 1501

  I have an INSPIRON 1501 laptop and have had problems with the sound for some time. When I watch movies, the sound is there. When I Skype, I can hear, but the other party can't hear what I'm saying. Skype can't detect sound card.

  What I've done so far:

  I went to control PANEL and then MANAGER of DEVICES, OTHER DEVICES. Here, I have only one BASIC DEVICE SYSTEM option with a yellow sign. I right click on properties, then under GENERAL clicked REINSTALL DRIVER, but Windows could not find driver software.

  I also tried option SOUND, VIDEO and GAME CONTROLLERS in the DEVICE MANAGER. There is only one HIGH DEFINITION AUDIO DEVICE option and it is not marked.

  Advice I have to install find the sound card.

  Thanks for all your advice beforehand.

  Thanks again for the support.
  So, it is possible that the problem lies in a loose plug?

  Off topic:

  When I turn on the PC, before Microsoft logo appears, I get the following message:

  WARNING: The battery cannot be identified. This system will not be able to charge this battery.

  Press any key to continue

  Press F2 2 times to enter SETUP

  Press F12 and any key to enter Boot Menu

  What is the problem and how can I get rid of this message?

• System error message -"windows cannot access the specified device path or file. You don't have permission to access it.

  Hello

  Can help you. Had problem with safety messages and now I can't open any programs, get message "windows cannot access the specified device path or file. you don't have permission to access"how to restore the system to clear the message

  No sound as I wrote it. But I've sorted it by running Paretologic Data Recovery

  Thanks for your response

• I have loaded the XP on my laptop. I lost the WiFi and all sounds. The computer will not even recognize that it has WiFi. I also does not recognize the sound card.

  I loaded XP and lost the WiFi and the sound from the laptop. It does not recognize that there is a WiFi unit in the computer. Ditto for the sound card.

  Hello

  You should have a cd driver provided with the laptop.

  If you do not access the manufacturers mobile site and download the drivers.

  Slan go foill, Paul

• Vista Home Premium gives the message "linked to limited accessibility" and I cannot access the internet.

  I have Vista Home Premium and trying to connect to a WiFi spot, I get the message "linked to limited accessibility" and I cannot access the internet. I understand this is common for Vista and there is a fix for this problem, but want to make sure that I get the right one and can't seem to find anything referring to this issue on the Microsoft site

  Hello

  This problem happens only when connecting to a particular place for the WiFi?

  You can follow the suggestions and check out them.

  Method 1

  You can read the article.

  Message when a device on a Windows Vista-based computer uses a network bridge to access the network: "connected with limited access".

  http://support.Microsoft.com/kb/930517

  Method 2

  Disable IPv6.

  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.

  NOTE: You should do this for each network connection.

  Method 3

  Temporary disable your security software.

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Note: Software antivirus and firewall can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attack.

  Method 4

  You can reset the TCP/IP stack.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

• Error when you try to play audio files: Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer where the file is stored

  Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect.

  I hope someone can help on Win 7 64 bit, music is taken on a disk usb2 external hard... I had no problem until today when the message in the title appeared next to each track, with a little red cross.

  I already deleted database library as suggested by some of the forums, also disabled the media as a feature of Win 7, rebooted and then re-enabled it.  I also disconnected externally and restarted that as well, I'm also the same mistake with a cd in the cd drive as well.

  Can anyone help?

  Hello

  This error may occur for one of the following reasons:
  The file is currently in use. Close the file and then try again.

  You are not allowed to access the location where the file is stored.

  Follow these steps to grant all permissions in the folder where the files are stored:
  1. right click on the folder on the external drive and click Properties.
  2. in the Properties window, click on Security tab.
  3. now, click Edit , and then click Add.
  4. now, type everyone in the box and click OK.
  5. check the full control box.
  6. click on apply and then click OK.

  You can also try the mentioned below as follows:

  1. click on start.
  2. go in Control Panel.
  3. Select "SOUND".
  4. double-click on speakers.
  5. click on the tab advanced and then uncheck the enable audio enhancements.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows cannot access the specified device, path or file. You can not have appropriate permission to access the item

  Allright guys. I'd like to say hi first. I had a huge problem masive. Sonyvegas I, and when I tried to use a keygen, it says Windows cannot access the specified device, path or file. You can't have appropriate permission to access the item"I did everything what I have seen here, run as administrator, I checked the administrator conrol Panel and im, I disabled antivirus (avira), firewall disabled, nothing works! And I would like to know if someoen can use teamviewer? and see what is wrong with my pc. I have win7, x 64...
  my Skype: vladutzrmx
  MSN: * e-mail address is removed from the privacy *.

  Hi XDivine,
  We cannot provide you with help on how to hack software

  Eddie B.

• VPN IS CONNECTED BUT CANNOT ACCESS THE INTERNAL NETWORK

  I tried to set up a simple customer vpn using this document

  http://www.Cisco.com/en/us/products/sw/secursw/ps2308/products_configuration_example09186a00801e71c0.shtml

  VPN IS CONNECTED BUT CANNOT ACCESS THE INTERNAL NETWORK BEHIND "RA"...

  6.3 (5) PIX version

  interface ethernet0 car

  Auto interface ethernet1

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  activate the encrypted password of VmHKIhnF4Gs5AWk3

  VmHKIhnF4Gs5AWk3 encrypted passwd

  hostname VOIPLABPIX

  domain voicelab.com

  fixup protocol dns-length maximum 512

  fixup protocol ftp 21

  fixup protocol h323 h225 1720

  fixup protocol h323 ras 1718-1719

  fixup protocol http 80

  fixup protocol they 389

  fixup protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol sip 5060

  fixup protocol sip udp 5060

  fixup protocol 2000 skinny

  fixup protocol smtp 25

  fixup protocol sqlnet 1521

  fixup protocol tftp 69

  names of

  access-list 101 permit ip 172.10.2.0 255.255.255.0 172.10.3.0 255.255.255.0

  access-list 101 permit ip 172.10.1.0 255.255.255.0 172.10.3.0 255.255.255.0

  access-list 102 permit ip 172.10.2.0 255.255.255.0 172.10.3.0 255.255.255.0

  access-list 102 permit ip 172.10.1.0 255.255.255.0 172.10.3.0 255.255.255.0

  pager lines 24

  Outside 1500 MTU

  Within 1500 MTU

  IP address outside 208.x.x.11 255.255.255.0

  IP address inside 172.10.2.2 255.255.255.0

  alarm action IP verification of information

  alarm action attack IP audit

  IP local pool voicelabpool 172.10.3.100 - 172.10.3.254

  history of PDM activate

  ARP timeout 14400

  NAT (inside) - 0 102 access list

  Route outside 0.0.0.0 0.0.0.0 208.x.x.11 1

  Route inside 172.10.1.0 255.255.255.0 172.10.2.1 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

  Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  AAA-server GANYMEDE + 3 max-failed-attempts

  AAA-server GANYMEDE + deadtime 10

  RADIUS Protocol RADIUS AAA server

  AAA-server RADIUS 3 max-failed-attempts

  AAA-RADIUS deadtime 10 Server

  AAA-server local LOCAL Protocol

  Enable http server

  http 172.0.0.0 255.0.0.0 inside

  http 0.0.0.0 0.0.0.0 inside

  No snmp server location

  No snmp Server contact

  SNMP-Server Community public

  No trap to activate snmp Server

  enable floodguard

  Permitted connection ipsec sysopt

  Crypto ipsec transform-set esp-aes-256 trmset1, esp-sha-hmac

  Crypto-map dynamic map2 10 set transform-set trmset1

  map map1 10 ipsec-isakmp crypto dynamic map2

  client authentication card crypto LOCAL map1

  map1 outside crypto map interface

  ISAKMP allows outside

  ISAKMP identity address

  part of pre authentication ISAKMP policy 10

  ISAKMP policy 10 encryption aes-256

  ISAKMP policy 10 sha hash

  10 2 ISAKMP policy group

  ISAKMP life duration strategy 10 86400

  vpngroup address voicelabpool pool cuclab

  vpngroup dns 204.x.x.10 Server cuclab

  vpngroup cuclab by default-field voicelab.com

  vpngroup split tunnel 101 cuclab

  vpngroup idle 1800 cuclab-time

  vpngroup password cuclab *.

  Telnet timeout 5

  SSH 208.x.x.11 255.255.255.255 outside

  SSH 0.0.0.0 0.0.0.0 outdoors

  SSH 172.10.1.2 255.255.255.255 inside

  SSH timeout 60

  Console timeout 0

  username labadmin jNEF0yoDIDCsaoVQ encrypted password privilege 2

  Terminal width 80

  Cryptochecksum:b03a349e1ac9e6022432523bbb54504b

  : end

  Try to turn on NAT - T

  PIX (config) #isakmp nat-traversal 20

  http://www.Cisco.com/en/us/products/ps6120/products_tech_note09186a00807e0aca.shtml#Solution1

  HTH

• CANNOT ACCESS THE LAN WITH THE EASY VPN CONFIGURATION

  Hello

  I configured easy vpn server in cisco 1905 SRI using ccp. The router is already configured with zone based firewall. With the help of vpn client I can reach only up to the internal interface of the router, but cannot access the LAN from my company. I need to change any configuration of ZBF since it is configured as "deny everything" from outside to inside? If so that all protocols should I match?   Also is there any exemption of NAT for VPN clients? Please help me! Thanks in advance.

  Please see my full configuration:

  Router #sh run
  Building configuration...

  Current configuration: 8150 bytes
  !
  ! Last modification of the configuration at 05:40:32 UTC Wednesday, July 4, 2012 by
  ! NVRAM config updated 06:04 UTC Tuesday, July 3, 2012 by
  ! NVRAM config updated 06:04 UTC Tuesday, July 3, 2012 by
  version 15.1
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  router host name
  !
  boot-start-marker
  boot-end-marker
  !
  !
  Passwords security min-length 6
  no set record in buffered memory
  enable secret 5 xxxxxxxxxxx
  !
  AAA new-model
  !
  !
  AAA authentication login default local
  AAA authentication login ciscocp_vpn_xauth_ml_1 local
  AAA authorization exec default local
  AAA authorization ciscocp_vpn_group_ml_1 LAN
  !
  !
  !
  !
  !
  AAA - the id of the joint session
  !
  !
  No ipv6 cef
  IP source-route
  no ip free-arps
  IP cef
  !
  Xxxxxxxxx name server IP
  IP server name yyyyyyyyy
  !
  Authenticated MultiLink bundle-name Panel
  !

  parameter-map local urlfpolicy TSQ-URL-FILTER type
  offshore alert
  block-page message "Blocked according to policy"
  parameter-card type urlf-glob FACEBOOK
  model facebook.com
  model *. Facebook.com

  parameter-card type urlf-glob YOUTUBE
  mires of youtube.com
  model *. YouTube.com

  parameter-card type urlf-glob CRICKET
  model espncricinfo.com
  model *. espncricinfo.com

  parameter-card type urlf-glob CRICKET1
  webcric.com model
  model *. webcric.com

  parameter-card type urlf-glob YAHOO
  model *. Yahoo.com
  model yapo

  parameter-card type urlf-glob PERMITTEDSITES
  model *.

  parameter-card type urlf-glob HOTMAIL
  model hotmail.com
  model *. Hotmail.com

  Crypto pki token removal timeout default 0
  !
  Crypto pki trustpoint TP-self-signed-2049533683
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 2049533683
  revocation checking no
  rsakeypair TP-self-signed-2049533683
  !
  Crypto pki trustpoint tti
  crl revocation checking
  !
  Crypto pki trustpoint test_trustpoint_config_created_for_sdm
  name of the object [email protected] / * /
  crl revocation checking
  !
  !
  TP-self-signed-4966226213 crypto pki certificate chain
  certificate self-signed 01
  3082022B 30820194 02111101 300 D 0609 2A 864886 F70D0101 05050030 A0030201
  2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43647274 31312F30
  69666963 32303439 35323236 6174652D 3833301E 170 3132 30363232 30363332

  quit smoking
  encryption pki certificate chain tti
  for the crypto pki certificate chain test_trustpoint_config_created_for_sdm
  license udi pid CISCO1905/K9 sn xxxxxx
  licence start-up module c1900 technology-package datak9
  username privilege 15 password 0 xxxxx xxxxxxx
  !
  redundancy
  !
  !
  !
  !
  !
  type of class-card inspect entire tsq-inspection-traffic game
  dns protocol game
  ftp protocol game
  https protocol game
  match icmp Protocol
  match the imap Protocol
  pop3 Protocol game
  netshow Protocol game
  Protocol shell game
  match Protocol realmedia
  match rtsp Protocol
  smtp Protocol game
  sql-net Protocol game
  streamworks Protocol game
  tftp Protocol game
  vdolive Protocol game
  tcp protocol match
  udp Protocol game
  match Protocol l2tp
  class-card type match - all BLOCKEDSITES urlfilter
  Server-domain urlf-glob FACEBOOK game
  Server-domain urlf-glob YOUTUBE game
  CRICKET urlf-glob-domain of the server match
  game server-domain urlf-glob CRICKET1
  game server-domain urlf-glob HOTMAIL
  class-map type urlfilter match - all PERMITTEDSITES
  Server-domain urlf-glob PERMITTEDSITES match
  inspect the class-map match tsq-insp-traffic type
  corresponds to the class-map tsq-inspection-traffic
  type of class-card inspect correspondence tsq-http
  http protocol game
  type of class-card inspect all match tsq-icmp
  match icmp Protocol
  tcp protocol match
  udp Protocol game
  type of class-card inspect correspondence tsq-invalid-src
  game group-access 100
  type of class-card inspect correspondence tsq-icmp-access
  corresponds to the class-map tsq-icmp
  !
  !
  type of policy-card inspect urlfilter TSQBLOCKEDSITES
  class type urlfilter BLOCKEDSITES
  Journal
  reset
  class type urlfilter PERMITTEDSITES
  allow
  Journal
  type of policy-card inspect SELF - AUX-OUT-policy
  class type inspect tsq-icmp-access
  inspect
  class class by default
  Pass
  policy-card type check IN and OUT - POLICIES
  class type inspect tsq-invalid-src
  Drop newspaper
  class type inspect tsq-http
  inspect
  service-policy urlfilter TSQBLOCKEDSITES
  class type inspect tsq-insp-traffic
  inspect
  class class by default
  drop
  policy-card type check OUT IN-POLICY
  class class by default
  drop
  !
  area inside security
  security of the OUTSIDE area
  source of security OUT-OF-IN zone-pair outside the destination inside
  type of service-strategy check OUT IN-POLICY
  zone-pair IN-to-OUT DOMESTIC destination outside source security
  type of service-strategy inspect IN and OUT - POLICIES
  security of the FREE-to-OUT source destination free outdoors pair box
  type of service-strategy inspect SELF - AUX-OUT-policy
  !
  Crypto ctcp port 10000
  !
  crypto ISAKMP policy 1
  BA 3des
  preshared authentication
  Group 2
  !
  crypto ISAKMP policy 2
  Group 2
  !
  ISAKMP crypto client configuration group vpntunnel
  XXXXXXX key
  pool SDM_POOL_1
  include-local-lan
  10 Max-users
  ISAKMP crypto ciscocp-ike-profile-1 profile
  vpntunnel group identity match
  client authentication list ciscocp_vpn_xauth_ml_1
  ISAKMP authorization list ciscocp_vpn_group_ml_1
  client configuration address respond
  virtual-model 1
  !
  !
  Crypto ipsec transform-set TSQ-TRANSFORMATION des-esp esp-md5-hmac
  !
  Profile of crypto ipsec CiscoCP_Profile1
  game of transformation-TRANSFORMATION TSQ
  set of isakmp - profile ciscocp-ike-profile-1
  !
  !
  !
  !
  !
  !
  the Embedded-Service-Engine0/0 interface
  no ip address
  response to IP mask
  IP directed broadcast to the
  Shutdown
  !
  interface GigabitEthernet0/0
  Description LAN INTERFACE-FW-INSIDE
  IP 172.17.0.71 255.255.0.0
  IP nat inside
  IP virtual-reassembly in
  security of the inside members area
  automatic duplex
  automatic speed
  !
  interface GigabitEthernet0/1
  Description WAN-INTERNET-INTERNET-FW-OUTSIDE
  IP address xxxxxx yyyyyyy
  NAT outside IP
  IP virtual-reassembly in
  security of the OUTSIDE member area
  automatic duplex
  automatic speed
  !
  interface Serial0/0/0
  no ip address
  response to IP mask
  IP directed broadcast to the
  Shutdown
  no fair queue
  2000000 clock frequency
  !
  type of interface virtual-Template1 tunnel
  IP unnumbered GigabitEthernet0/0
  ipv4 ipsec tunnel mode
  Tunnel CiscoCP_Profile1 ipsec protection profile
  !
  local IP SDM_POOL_1 172.17.0.11 pool 172.17.0.20
  IP forward-Protocol ND
  !
  no ip address of the http server
  local IP http authentication
  IP http secure server
  !
  IP nat inside source list 1 interface GigabitEthernet0/1 overload
  IP route 0.0.0.0 0.0.0.0 yyyyyyyyy
  IP route 192.168.1.0 255.255.255.0 172.17.0.6
  IP route 192.168.4.0 255.255.255.0 172.17.0.6
  !
  access-list 1 permit 172.17.0.0 0.0.255.255
  access-list 100 permit ip 255.255.255.255 host everything
  access-list 100 permit ip 127.0.0.0 0.255.255.255 everything
  access-list 100 permit ip yyyyyy yyyyyy everything
  !
  !
  !
  !
  !
  !
  !
  !
  control plan
  !
  !
  !
  Line con 0
  line to 0
  line 2
  no activation-character
  No exec
  preferred no transport
  transport of entry all
  output transport lat pad rlogin lapb - your MOP v120 udptn ssh telnet
  StopBits 1
  line vty 0 4
  transport input ssh rlogin
  !
  Scheduler allocate 20000 1000
  end

  A few things to change:

  (1) pool of IP must be a single subnet, it is not the same subnet as your subnet internal.

  (2) your NAT ACL 1 must be changed to ACL extended for you can configure NAT exemption, so if your pool is reconfigured to be 10.10.10.0/24:

  access-list 120 deny ip 172.17.0.0 0.0.255.255 10.10.10.0 0.0.0.255

  access-list 120 allow ip 172.17.0.0 0.0.255.255 everything

  overload of IP nat inside source list 120 interface GigabitEthernet0/1

  No inside source list 1 interface GigabitEthernet0/1 ip nat overload

  (3) OUT POLICY need to include VPN traffic:

  access-list 121 allow ip 10.10.10.0 0.0.0.255 172.17.0.0 0.0.255.255

  type of class-card inspect correspondence vpn-access

  game group-access 121

  policy-card type check OUT IN-POLICY

  vpn-access class

  inspect