[Skype Chat Group] Role of the creator is a Director and has no power of creator

Similar Questions

• My display suddenly developed the columns of white dashes and has been distorted in many places.

  My display suddenly developed the columns of white dashes and has been distorted in many places. Subsequently, do not display and the computer turns off to protect themselves. I opened it in safe mode, and the screen is fine. I suppose a software problem. I tried to download a driver for AMD Radeon HD 6570 GPU without result and tried a reset to an earlier date also with no luck. Does anyone have any suggestions?

  Hello

  You certainly know the graphics that, when you say Radeon?

  You normally get drivers Chipset/video/graphic of your computer/notebook or the graphics card, if you have installed a graphics card manufacturer's Web site.

  If he continues to play until after you have installed the latest drivers, next step is to swap the graphic card with a good if a desktop computer.

  This is the path, and the problem is somewhere along it:

  Monitor > cable > Port > that is either connected to a graphics card in a slot on the motherboard or integrated graphics hardware that is part of the motherboard.

  When a laptop; If under warranty, contact the manufacturer.

  If it is not under warranty, contact a repair shop, local.

  See you soon.

• When paused in the timeline the video is very pixelated and has red and yellow lines going down it

  When paused in the timeline the video is very pixelated and has red and yellow lines going down it.

  He plays very well, but when any display of still images he look like the image below. Someone knows how to fix this?

  

  Hey Danny,

  Go to the file/project settings/general and change the rendering on "Mercury Playback Engine software only" engine.

  Press OK, you will get a dialog box in which select "remove previews."

  Try these steps and it should work.

  Check out this post on the forum for more details: Heads up on first with El Capitan

  Kind regards

  Navdeep Pandey

• When I open Illustrator I get an error: "the preferences file is corrupt and has been reset to the default settings. "The corrupt file is saved as: Adobe Illustrator Prefs.err.

  When I open Illustrator I get an error: "the preferences file is corrupt and has been reset to the default settings. "The corrupt file is saved as: Adobe Illustrator Prefs.err.

  Hello

  We have released an WINDOWS ONLY fix today that solves this problem of corrupted preferences. Go to the creative cloud application and download the patch CC 20151.1 (19.1.1)

  If you see not the patch in the creative Cloud application wait on or refresh cycle you can disconnect and connect to force refresh the list of available patches.

  Kind regards

  Ashutosh

  On behalf of the Illustrator engineering team

• Steps: we received the file in PDF format and has been invited to modify the form.

  Steps: we received the file in PDF format and has been invited to modify the form.

  
  

  My colleague edited in Livecycle es4.

  
  

  When we sent the document to them, they asked to have the title marked as H1, as it is currently labeled as content.

  
  

  In live cycle, unknowledgable about how we change it.

  
  

  We then took the file is saved as a word document in their exported to PDF via adobe DC

  
  

  my changes and referred.

  
  

  Once they have received the file they are unable to put anything (all data in the document where it will also prompt) using the player

  
  
  

  We are not writing this on the central computer, but that's what we have...

  
  
  

  Acrobat reader ix 11.0

  
  

  Adobe live cycle ss4 11.0

  
  
  

  Thank you...

  It is urgent need please reply as soon as possible

  Hi barbarac80529448,

  Please see this KB doc. helps LiveCycle | Working with the forms, it might help you in the installation of PDF form in Adobe LiveCycle.

  Kind regards

  Nicos

• One of my pages in the plan view is gray and has a white triangle on the corner - what does that mean?

  One of my pages in the plan view is gray and has a white triangle on the corner - what does that mean?

  

  Hi, this means that this page is not to be exported when publish you your site. Check and make a right click Export... and change it if you need))

• FDM Mail Err: The path of the pickup directory is necessary and has not been specified.

  FDM 9.3.1 on Microsoft (r) Windows (r) Server 2003, Enterprise Edition, Version 5.2.3790 Service Pack 2 Build 3790
  
  I get the following error message when you try to send an e-mail. I checked that all the parameters are valid & passed correctly to the Sub. Line 343 is the. Send the order.
  
  ERROR:
  Code...-2147220958
  Description... The path of the pickup directory is necessary and has not been specified.
  
  Online: 343
  Process... clsEventHandler.PobjAPI_ImportAction
  The component... upsWObjEventHandlerDM
  Version...................................... 931
  Thread....................................... 8704
  
  
  Void SendMail (strTo, strErr, strFrom, strSMTPSvr)
  
  Set objConfig = CreateObject ("CDO. Configuration")
  
  With objConfig.Fields
  . Agenda ("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2' 1 = use the local computer, 2 = use on network
  . Agenda ("http://schemas.microsoft.com/cdo/configuration/smtpserver") = strSMTPSvr
  . Agenda ("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = 25
  . Agenda ("http://schemas.microsoft.com/cdo/configuration/smtpconnectiontimeout") = 10
  . Update
  Ends with
  
  Set objMsg = CreateObject ("CDO. Message")
  Set objConfig = objMsg.Configuration
  
  With objMsg
  . To = strTo
  . From = strFrom
  . Object = "product missing mapping Custom2 table."
  . TextBody = strErr
  . Send
  Ends with
  
  Set objMsg = Nothing
  Set objConfig = Nothing
  
  End Sub

  SMTP

• "the preferences file is corrupt and has been reset to the default settings" cs4 Mac

  Greetings!

  whenever I run illustrator that I encounter a new error.

  "the preferences file is corrupt and has been reset to the default settings."

  "the corrupted file is saved as Adobe illustrator Prefs.err".

  This problem that manifests itself after I added a few other .ai and .ase files in my directory of nuances. I think not changed nothing else.

  don't know how to diagnose the problem. is there a mode debug or something? Maybe a file in question.

  one option would be to try to remove each added file swatch or folder individually, but it would be a very tedious process for me.

  I use cs4 on a Macbook pro running Snow Leopard - 10.6.2 and would appreciate your advice.

  Thank you

  s

  s,

  Whenever you close Illy, the current preferences (which may have been changed while you worked on files) are recorded, and every time that you start Illy, these preferences will be used.

  Usually, corruption of preference probably appears randomly, caused by the operating system, but if something in your files to change preferences to something that is not viable, you will get an error like this.

  You can press Cmd + Option + shift during startup, which will replace the current preferences with the default values, and no doubt you you get rid of the error message. It is probably not a cure, however.

  If the error is persistent, the cure would be to get rid of things that are implicated in the files you are editing.

• Error: The display driver stopped responding and has recovered

  Sometimes (one times a day at least)
  video driver says:

  "Display driver has stopped working and has been restored! »
  Someone suggests the cause or the problem?
  Thank you

  Hello

  I found an interesting about this error - http://support.microsoft.com/kb/2665946 article
  I do not know what computer you are using, but what you can try is to visit the Toshiba download page and check if the latest driver is installed on your machine.

  To be honest, from time to time the same happen on my machine. I use Win7 64 bit. It happens usually if several applications are open and that one of them is active in the flash player window.

  Can you please tell us which model of laptop you have and which version of Windows is installed?

• Please help to choose the order of drivers when I get the "Display Driver Stopped Responding and has recovered" message

  Running: Win7 - XPS 8100 8 GB - 64 bit OS

  Graphics card: ATI Radeon HD 5450

  Serial number ADMIN NOTE: maintain the label removed by privacy policy >

  Hello

  Recently I get this message as the computer freezes momentarily and then recovers.

  "Display driver AMD driver stopped responding and has successfully recovered."

  I checked the support for Dell drivers and received conflicting results.

  When I checked with the help of system analysis, it gave me a list of the 54 system-wide updates. How could it be possible?

  When you use the label of my service, I got the following result:

  ADMIN NOTE: maintain the label removed by privacy policy >

  Don't you think that's what I use, and if yes, can you tell me who I should first put to date? Finally, what I have to uninstall the old drivers and update via the Device Manager?

  Thanks in advance for your help,

  Jane

  54 updates is not necessary. You should only update a driver to correct a specific problem. You don't need to remove the video card driver before installing a newer version.

  * Go here
  * Click on download
  * The file should save on your windows desktop
  * Double-click the file
  Follow the instructions

• How draw you the current in a diode that has a power supply?

  I thought it was done using transient analysis, but it does not give me the correct plot.

  Hi Isha,

  You can use the current probe and plug it into the scope and when you simulate the circuit, the plot on the scope of application is up-to-date.  The current probe is the toolbar tools or you access by select simulate > instruments > current probe.

• 11 media player changes do not appear in the name of the file or media center library? UPDATED, I FOUND THE ANSWER, IT IS SIMPLE AND HAS NEVER MENTIONED TECHNICAL SUPPORT ENGINEERS THAT IT

  I ripped CD via MP11 and the Windows lossless format.  After having them, I decided to change the tags like for some of them, a right click, type, no problem.

  In MP11 genre tags now show that what I changed them but when I go to the Vista Media Center music library, which is to look at the record music CDs ripped are genres appear as the original labels I came when they were torn.  When I look at the music files also have the original genre listed.

  How can I get the genre has changed in the file information (I guess that Vista Media Center uses this information when it displays the kind) in Media Player?

  Hello Kent,

  Thank you for using the Microsoft Answers forum.  I suggest you to remove the Media Center files and add them.
  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• No link between the IOM, 1/1/3 and has 1/3 FI

  Hello

  When we first set up our UCS we connected all four of the IOM fabric interconnect Ports but now we wanted to remove both of them in order to save some ports on the FI. We configured the ports of #3 and #4 on the two FIs server and subsequently removed the cables.

  However, now that we receive the F0367 error message "no connection between IOM port 1/2/3 and fabric interconnect B:1 / 3" for all fabric ports where we have removed the cables.

  Same definition of chassis discovery 2 links and re-recognition strategy has not solved the errors.

  Does anyone knows how to fix this?

  Concerning

  Hello Lorenz,

  Are what version of the UCS you currently?

  Also see loss of traffic on the blades for which these flaws are high?

  I guess you hit the following bug: CSCtg74026 (compensation of IOM defects: not after change of political discovery chassis)

  This has been fixed in the current relase of 1.4. However, the solution is to make a chassis of comission and the re-discovery.

  I hope this helps!

  . / Afonso

• need to update the first, but it stops and has to close CEPHtmlEngine... what?

  I need to update the first on the creative cloud but it stops and 62% and needs to close "CEPHtmlEngine" to continue. What is this and how do I close/change app?

  Jason2494 you want to use the Activity Monitor/Task Manager to close the adversarial process.  What operating system do you use?  You can also try restarting your computer and then try to apply the update again.

• My laptop volume is very low, even with the maximum setting. It also has a very annoying echo

  I tried every setting available on this laptop, go all together if not try several changes in all settings. The volume is still low and has a very annoying reverberation and echo effect, even with these settings turned off. I got it for a week, and I was very happy with any other accept the audio. The reasons for buying this model were media processing and so far I have and become more disgusted daily with her. It is a Pavilion dv6 and it has beat audio software. If anyone has a solution, it would be much appreciated.

  Hello

  One thing that can help is the following.  Do a right-click the speaker icon in the taskbar and select "playback devices".  Left click the device once to highlight default (it is usually 'speakers and headphones') and then click the properties button.  Click the enhancements tab and put a check mark in the box "Loudness equalization.  Click on apply to save the changes and then click OK in all other windows and see if allowed at all.

  Kind regards

  DP - K