Skype continues autosigning with no information

Similar Questions

• acquisition of continuous sample with multiple channels

  Hello! Please tell me what I'm doing wrong here, I'm confused about how the acquisition of continuous sample with several channels (using NI USB-6215 boxes).

  Following code is python code, but I don't know who confuse you (and it's only a part of my code in order to not try, it won't work

  buffer_size = 2000 #samples to read
  sampling_rate_hz = 20000
  channels = "Dev1/ai0 ai1/Dev1" #this can be a string or a large number...

  CHK (nidaq. DAQmxCreateTask ("", ctypes.byref (taskHandle)))

  CHK (nidaq. DAQmxCreateAIVoltageChan (taskHandle, channels,"", DAQmx_Val_Cfg_Default, float64(-10.0), float64 (10.0), DAQmx_Val_Volts, None "))

  CHK (nidaq. DAQmxCfgSampClkTiming (taskHandle,"", float64 (sampling_rate_hz), DAQmx_Val_Rising, DAQmx_Val_ContSamps, uInt64 (buffer_size) "))

  CHK (nidaq. DAQmxRegisterEveryNSamplesEvent (taskHandle, DAQmx_Val_Acquired_Into_Buffer, uInt32 (1000), uInt32 (0), EveryNCallback_func, None))

  CHK (nidaq. DAQmxRegisterDoneEvent (taskHandle, uInt32 (0), DoneCallback_func, None))

  the callback function #and

  def py_EveryNCallback_func (self, taskHandle, event_type, nSamples):
  data = numpy.zeros ((self.channel_amount,buffer_size,), dtype = numpy.float64)
  read = int32()
  CHK (nidaq. DAQmxReadAnalogF64 (taskHandle, buffer_size, float64 (10.0), DAQmx_Val_GroupByScanNumber, data.ctypes.data, buffer_size * number_of_channels, ctypes.byref (read), None))

  With only one channel, everything's fine, and tension diagram looks like this:

  

  buffer_size = 2000, sampling_rate_hz = 20000

  But if I use two channels, voltage diagram looks like this

  

  buffer_size = 2000, sampling_rate_hz = 20000

  It looks like the sampling rate is higher or there are fewer values?, but with two channels with the results table is 2000 * 2 long and with a single result is 2000 * 1 long is not smaller

  most of the settings important (?) in my code:

  DAQmxCfgSampClkTiming "float64 rate": 20000 (sampling_rate_hz)
  'UInt64 sampsPerChanToAcquire' DAQmxCfgSampClkTiming: 2000 (buffer_size)
  DAQmxRegisterEveryNSamplesEvent "uInt32 nSamples": 1000 (?)
  'Int32 numSampsPerChan' DAQmxReadAnalogF64: 2000 (buffer_size)
  DAQmxReadAnalogF64 "float64 [] readArray": [[buffer_size] * number_of_channels]
  'UInt32 arraySizeInSamps' DAQmxReadAnalogF64: buffer_size * number_of_channels

  as you can see nSamples is a big question mark, but the problem still exists if I set variable buffer_size y (2000)

  Hi Dazzler,

  It is not a multi-channel example that ships with the driver, but after a quick look at the code that you use in your third post, everything seems to be configured correctly. The only thing I was thing I got a question about your plots. Looks like you draw each time the same number of points. If you draw just the table of data directly from the playback feature, you need to draw (buffer_size * number_of_channels) number of channels since the data returned is as an interlaced array. You can also choose to deinterleave samples. More information about this lie in the NOR-DAQmx C reference help, which is installed with the NOR-DAQmx driver.

  Kind regards

  Kent

  Technical sales engineer

• form using the trial version and it continues to repeat the information to a page (either first or last page) to all pages and deleted the contents entered in

  form using the trial version and he continues to repeat the information of a page (either first or last page) to all pages and remove the content that has been entered into.

  The fields with the same name will be the same content. You must change the names of the fields.

• You need to reset and or change my old icloud account of moms on the phone with another. When I try to reset it with the information that we know that it says "blocked account"

  You need to reset and or change my old iCloud account of moms on the phone with another. When I try to reset it with the information that we know that it says "blocked account"

  ACCOUNT SAFETY CONTACT NUMBERS

• Skype cannot connect with the latest version?

  Hello there guys. I got the error "Skype cannot connect" with the latest version? I tried to reinstall Skype, so that delete my Skype folder in %AppData%, it did not work, I have to do? I tried to log in with your new account, still no luck? How can I sign in Skype... ?

  So I just fixed my problem by installing win 8.1 Pro 64 bit hehe Thx for the help anywayz.

• Is there a way to put a button on the front panel only when clicked gives a pop-up dialog box with more information on it?

  Hello world

  The simulations that I create are very simple themselves but are intended to use in the classroom to help students learn more about the proven theory.  I hope to be able to place a 'help' or 'other info' button on the front panel that rises wants more info on theory, they can click on it and a pop up appears with background information on it.  It should also have a second button to close it and return to the main façade.  Can anyone lead me in the right direction?

  Thank you!

  Use a structure of the event on the main vi when the button is clicked, launches a "help" void / vi. On the inside of the Sub vi (with the set properties to load the front when it is called, of course), use another structure of the event to wait until then click on the button of the Subvi, you can return to the main VI. Do you need assistance on using the structures of the event?

  Charles

• We could not find settings for < email address > provide us with more information, and we will try to reconnect.

  We could not find settings for provide us with more information, and we will try to reconnect. and I am using a comcast email, I can sync it on my outlook through outlook.com but he wont "Let me add through to add it as an account with my Win User 8..." I use an email from comcast, nothing works and I also tried to my gmail but gmail works

  http://answers.Microsoft.com/en-us/windowslive

  This is the forum for email.

  Sorry I couldn't help you.

• Skype works only with windows vista

  For the entire month past, whenever I open Skype, it immediately no longer works and I get a Windows message saying to download the latest version of Skype.  I am running Windows Vista and I think I need some kind of patch from Microsoft.  Anyone know where I can get to fix this?  Skype forum is useless.

  Hello

  ·         Were there any changes made to your computer until the problem occurred?

  Check the event viewer for any related event logs on what is causing the problem:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

   

  Completely uninstall and then reinstall the latest version of Skype and check if it helps:

  How do I completely uninstall and reinstall Skype?

  https://support.Skype.com/en-GB/FAQ/FA10634/how-can-I-completely-uninstall-and-then-reinstall-Skype

  Provide us additional information, as appropriate. So that we can help solve you the problem on your computer.

  Hope this information helps you.

• I sent an email with personal information on the wrong account can I block it

  I sent an email with personal information on the wrong account can I block it

  Lol when the message leaves your Outbox, is only a matter of one or two seconds, until it is on the server of recipients.

• I received a message on my email that my live hotmail is about to be eliminated, and information is required and click on the back with my information. True or phishing?

  I received a message on my email that my live hotmail is about to be eliminated, and information is required and click on the back with my information.  True or phishing?

  Hello

  This is a phishing scam.

  Don

• I keep getting blue screens on Page_Fault_In_Nonpaged_Area with technical information stop: 0 x 00000050 (0xD8CE3000, 0 x 00000000, 0 x 00000000, 0X82E77D2C).

  I work as a tech TI and at present, we use laptops Lenovo x 230, I have install Windows 7 Enterprise N and then General programs such as internet browsers, some software to sync files, a bunch of business called Visual files, and other small pieces such as Adobe Reader, etc.

  I keep getting blue screens on Page_Fault_In_Nonpaged_Area with technical information stop: 0 x 00000050 (0xD8CE3000, 0 x 00000000, 0 x 00000000, 0X82E77D2C). What happens on several machines and renders useless about 10 laptops for us because we use images of machine.

  I tried to use known last good config, I searched the corrupt drivers suggested in other posts, but they are not present, the center of the action cannot stop and I couldn't debug tool to work. Antivirus software can not also be that no problem because it is installed as part of the standard image.

  Forgive me if I posted this to the wrong topic area and any ideas would be greatly appreciated as this has been a matter of concern to me for almost 6 months now.

  Original title: Blue Screen Windows 7 Enterprise N

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.
  If you are overclocking stop.  (chances are if you are unsure if you are, you are not) a
  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".  We need at least 2 FILES DMP to diagnose and confirm
  
  The procedure:
  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
  * Zip up the copy.
  * Join ZIP archive to your message by using the button (attachments) "trombone". (if available on your site, MS has this)
  * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

  Link to find out how to download below.
  http://www.WikiHow.com/use-SkyDrive

  
  To ensure the minidumps are enabled:
  * Click Start, in the search box, type: sysdm.cpl, press ENTER.
  * On the Advanced tab, click Startup and recovery... Settings button.
  * Make sure that automatically restart is unchecked.
  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
  * OK your way out.
  * Reboot if changes have been made.
  
  Please also run MSinfo32 and download the output as well.
  To run MSinfo32 please go to start > run > MSinfo32
  Go to 'file', 'save' and download the PDF is saved with the DMP
  (Instructions for XP, Vista, Win 7, Win 8)

  System specs are extremely useful then please include everything you know.

  The Zigzag3143.com team 

• There is a problem with the information of card entered here. Please enter another card or contact your bank. Can Hoqw I solve this guy?

  There is a problem with the information of card entered here. Please enter another card or contact your bank. Can Hoqw I solve this guy?

  Hello

  Please contact support: -.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Hope this helps!

• Adobe Reader for Android has recorded a .pdf file with the information sensitive to the 'public folder '.

  I was grabbing a W-9 for commercial purposes and has sent through Gmail using the Adobe Reader software and unwittingly saved to a 'public folder '.

  
  

  To clarify if you use the sharing option, I was invited with a box that said something along the lines, "File will be saved in a public share folder."

  
  

  My question is, how do I remove my document with sensitive information of this public folder?

  I guess I found my answer.  Re: can't share more to Dropbox or sharing to gmail, I get an error access denied or file not found.  Please help

  The second to the last comment explains that the "public record" is actually a temp folder on your mobile device and is supposed to be deleted after that its function is made.

• Fill in the form with the information to another form

  I have 2 forms.  I want to automatically fill the second form with the information of the first shape.  How could I get this?  I tried to import the xml data in the first shape in the second form, and nothing happened.  All fields of the second form have the same name as the corresponding fields on the first form.  I don't know what else I'm missing / need to do.

  Any help is very appreciated!

  Thank you

  Rose.

  Data can be imported into another form, but if it is not based on the same structure or schema (having the same name is not enough), then you can map incoming data to the fields on your form (this is called binding). In the dataview tab, you can create a new data connection (use the sample xml option) and your data structure is displayed in the palette. Then simply drag and drop each data node on the ground where the data should go. An icon will appear next to the data node to indicate that it is linked. Now, when you import the product data knows where you want the mapped data.

  You can also see where each field of the form is bound by highlighting the classified and clicking on the link tab.

  Paul

• Import database using 11 g is important all the packages with debugging information

  We are modernizing our database from 9i to 11g using imp/exp. The problem we see is that all packages/procedureas/functions are imported with debug information.
  It seems that imp utility changes import session to set PLSQL_DEBUG = TRUE. On the 9i database, objects are not compiled with debugging information, and we do a full import with parameters FULL = O and IGNORE = N.
  
  We found no information about this behaviour anywhere while we ask this is the default behavior, can it be changed so that the imported objects are not compiled with debug information and if not, what is the better and more effective way to drop all debug information on objects that have? We hoped to use DBMS_UTILITY.COMPILE_SCHEMA, but it recompiles objects preserve debug information on the objects that had them before running the command. We can EDIT the PACKAGE COMPILER on all packaging and it will solve our problem, but it will take a lot of time to recompile all our objects from our database is very large.

  Hello

  I just did a test of my own. Here's what I did:

  Database without active debugging:

  create or replace function scott.foo (in number) return number is
  Start
  return 10;
  end;
  /

  has ran exp then looked the dumpfile. That's what I saw:

  ALTER SESSION SET "_LOAD_WITHOUT_COMPILE" = PLSQL
  FORMAT71 CREATE FUNCTION 'FOO' bunch of non ascii here
  ALTER SESSION SET '_LOAD_WITHOUT_COMPILE' = NONE
  ALTER FUNCTION 'FOO' COMPILATION REUSE SETTINGS TIMESTAMP ' 2010 - 03 - 16:10:31:03'

  This resembles the exp has detected that the debug flag is not set and the function exported and recompiled it reset the compile time for the same time of the compilation of the source database.

  Then I did:

  ALTER session set plsql_debug = true;
  create or replace function scott.foo2 (in number) return number is
  Start
  return 10;
  end;
  /

  At this point, function foo was built without debug and function foo2 was build debug.

  I ran exp again and looked in the dumpfile. That's what I saw:

  ALTER SESSION SET "_LOAD_WITHOUT_COMPILE" = PLSQL
  ALTER SESSION SET NLS_LENGTH_SEMANTICS = 'BYTE' PLSQL_CODE_TYPE = 2 = PLSQL_OPTIMIZE_LEVEL "INTERPRETED" PLSQL_DEBUG = TRUE PLSQL_WARNINGS = "DISABLE: ALL" PLSQL_CCFLAGS = "
  CREATE FORMAT71 FUNCTION 'FOO2' - of the bunch of non ascii here
  CREATE FORMAT71 FUNCTION 'FOO' - lots of non ascii here
  ALTER SESSION SET '_LOAD_WITHOUT_COMPILE' = NONE
  ALTER FUNCTION 'FOO2' COMPILATION REUSE SETTINGS TIMESTAMP ' 2010 - 03 - 16:10:35:46'
  ALTER FUNCTION 'FOO' COMPILATION REUSE SETTINGS TIMESTAMP ' 2010 - 03 - 16:10:31:03'

  In this case, it seems that these two functions will be built with active debugging. I don't know what is happening in your case. You can contact the Oracle Support to see if they know about this problem and if they know of a work-around.

  Good luck

  Dean