Skype installation failed; code 1632 on new disc

Similar Questions

• Skype installation failed; Code of 1632

  Im making a mistake like:

  Skype installation failed; Code of 1632
  The temp folder is on a drive that is full or is inaccessible. Free space on the disk, or else make sure you have persimission of Scripture on the Temp folder.

  I tried to use different POS and also I tried to install the .msi version but I get page not found error.please help me. I use windows 8.

  Try this:

  http://community.Skype.com/T5/Windows-desktop-client/help-need-a-way-to-run-Skype-w-o-install/m-p/38...

• Skype installation failed, error code 1601

  a new Tower, I bought a couple months ago and im trying to install Skype on it, it downloads and past by installing, but at the end of the installation, an error box appears that says

  Skype installation failed; code 1601
  The Windows Installer service could not be accessed. Contact your support staff to check the service Windows Installer is correctly recorded.
  Can someone help me with this? I have no idea what that means or how to fix it.

  Hi young sj,.

  Follow these methods.

  Method 1: Follow these steps:

  1. go to the Skype website (see resources links to download Skype for Windows, Mac and Linux) and download the executable SkypeSetup.exe.

  (The software is installed under the Program Files folder in a directory called Skype, which is automatically created. A Skype installer icon is automatically created on your desktop).

  2. click on the Skype Setup icon located on your desktop. A Skype Setup Wizard will appear. You will get a warning window asking if you want to run or save this file: SkypeSetup.exe. Click on 'run '.

  Note: Another confirmation message may appear, asking if you are sure you want to run this software. Click again on 'run '.

  3 follow the instructions on the Skype Setup Wizard to complete the installation of the Skype software. At the end of the installation, you will be asked to create a Skype account.

  4. a Skype window will appear, and if you've never used Skype before, you can create a Skype account. You will see a link on the window stating the following: "don't have a Skype name?

  Click on this link and it opens another window "Skype - create a new account", where you type your display name, and then type a Skype name and a Skype password and repeat password in the respective fields on this window.

  Note: Note your Skype name and password because you will need every time that you open the Skype application.

  5. click on the button "connect".

  Note: After you create your new Skype account for the first time, the next time you open Skype, your Skype name to appear automatically in the Skype Name field. All you need to do is enter your Skype password and click the button "connect".

  6 follow the instructions in the "Getting Started" guide to add a contact, using the button 'Add Contact'; to test your headset and microphone, using the "Skype call Test function; to set up a conference call with a business colleague or friend; and explore all the other features of Skype.

  7. Once you have installed the Skype software, there are two ways you can open the Skype application. Click the "Skype" icon on your desktop, or double-click on the 'x' icon in the desktop system tray to start Skype at any time.

  Method 2: Put the computer in a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting steps, follow step 7 in the link to return the computer to a Normal startupmode.

  Try to install the program as an administrator.

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-run-an-application-once-with-a-full-administrator-access-token

• Flash Media Encoder 3.2 installation failed - Code 7 of output

  Trying to install Flash Media Encoder on Osx 10.11.2 (i7 El Capitan) 16g ram

  Activity log shows:

  ERROR: DW042: entry ARP could not be created for the language: en

  Exit code: 7 - could not complete the silent workflow

  Any help would be greatly appreciated. Since a few days now with no luck and no taken Adobe supported this.

  Thank you

  D

  Here's the log to install current Adobe:

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  Visit http://www.Adobe.com/go/loganalyzer/ for more information

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  START - Installer Session

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  Version of RIBS: 5.0.65.0

  The OSX version: 10.11.2

  : TIMER: [Total timer]

  CHECK: Single Instance

  CHECK: credentials

  Load deployment file

  CHECK: Another installer native OS already running

  Create required folders

  Assuming the installation mode

  : TIMER: [boot]

  Perform the boot...

  : TIMER END: [Bootstrap] took 3509 milliseconds (3,509 seconds) DTR = 269,023 Kbps (0,262717 Mbps)

  Search for path source install

  Media Sync DB...

  : TIMER: [synchronize media DB]

  Pre check media db sync

  End of pre check media db sync. Exit code: 0

  : TIMER END: [media DB Sync] took 8 milliseconds (0.008 seconds)

  Ready to initialize the session started by...

  : TIMER: [CreatePayloadSession]

  -START - updated media Sources - BEGIN-

  Update source path: Volumes/Flash Media Live Encoder 3.2

  Update media info for: {BAEDFDDE-826B-4692-9C88-F7795E47DA9F}

  Type: order 1, volume: 1, media: Flash Media Live Encoder 3.2

  Path: / Volumes/Flash Media Live Encoder 3.2/payloads/AdobeFMLE4All/AdobeFMLE4All.dmg

  -Updated media Sources - the END-

  Support for the version of COAST range: [0.0.66.0,5.0.65.0]

  -CreatePayloadSession: the machine is x 86-

  _ Check _ subscribers dependence

  Order of operation BEGIN all the payloads of session: library (requires, satisfied)

  {BAEDFDDE-826B-4692-9C88-F7795E47DA9F} Adobe Flash Media Live Encoder 3.2.0.0: 0 (0.0)

  COMPLETE the operation order for all the payloads of session: library (requires, satisfied)

  Setting the property "INSTALLDIR": / Applications/Adobe

  Affecting the "installLanguage" property: en_US

  Try to find the language in all of the languages of the payload available

  Setting the 'installSourcePath' property: Volumes/Flash Media Live Encoder 3.2

  Replace the 'DEVersion' property to: 5

  Replace the "userASUPath" property to: / Users/Floorfucker/Applications/Adobe/OOBE/PDApp

  Find actions of payload:

  Decide which mode of installation to use...

  Setting START asked actions of payload

  Value returned by searches for payload: {BAEDFDDE-826B-4692-9C88-F7795E47DA9F} is Adobe Flash Media Live Encoder 3.2.0.0: false

  Chain of action for {BAEDFDDE-826B-4692-9C88-F7795E47DA9F} Adobe Flash Media Live Encoder 3.2.0.0 is installed

  Setting END asked actions of payload

  Were collected advanced path check to INSTALLDIR

  INSTALLDIR is a correct path

  INSTALLDIR is not the root path

  INSTALLDIR is on a local volume

  INSTALLDIR is on a volume that is accessible in writing

  INSTALLDIR is not on a case-sensitive volume

  INSTALLDIR successful path validation database path: / Applications/Adobe

  Operations START InstallOperationsQueue unordered

  {BAEDFDDE-826B-4692-9C88-F7795E47DA9F} Adobe Flash Media Live Encoder 3.2.0.0: operation installation

  Unordered InstallOperationsQueue to END operations

  START InstallOperationsQueue ordered operations

  {BAEDFDDE-826B-4692-9C88-F7795E47DA9F} Adobe Flash Media Live Encoder 3.2.0.0: operation installation

  END InstallOperationsQueue ordered operations

  Payloads were committed before the flight.

  [0] Tue Jan 12 02:04:55 ERROR 2016

  DW042: ARP entry could not be created for the language: en

  [0] Tue Jan 12 02:04:55 2016 INFO

  : TIMER END: [Total Timer] took 3606 milliseconds (3,606 seconds) DTR = 260,677 Kbps (0,254567 Mbps)

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 1 Error (s), 0 warning (s)

  ERROR: DW042: entry ARP could not be created for the language: en

  Please search the service of error/warning above to find when the error occurred.

  These errors resulted in installer exit code mentioned below.

  -------------------------------------------------------------------------------------

  Exit code: 7 - could not complete the silent workflow.

  Please see errors and warnings for troubleshooting. For example, ERROR: DW042...

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  END - Installer Session

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  Visit http://www.Adobe.com/go/loganalyzer/ for more information

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  START - Installer Session

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  Version of RIBS: 3.0.116.0

  The OSX version: 10.11.2

  : TIMER: [Total timer]

  CHECK: Single Instance

  CHECK: credentials

  Load deployment file

  Create required folders

  Assuming the installation mode

  : TIMER: [boot]

  Perform the boot...

  : TIMER END: [Bootstrap] took 751 miliseconds (0,751 seconds) DTR = 97986,7 Kbps (95,6901 Mbps)

  Search for path source install

  Media Sync DB...

  : TIMER: [synchronize media DB]

  Pre check media db sync

  End of pre check media db sync. Exit code: 0

  : TIMER END: [media DB Sync] took 0 milliseconds (0 seconds) DTR = inf Kbps (inf Mbps)

  Ready to initialize the session started by...

  : TIMER: [CreatePayloadSession]

  -START - updated media Sources - BEGIN-

  Update source path: Volumes/Flash Media Live Encoder 3.2

  Update media info for: {BAEDFDDE-826B-4692-9C88-F7795E47DA9F}

  Type: order 1, volume: 1, media: Flash Media Live Encoder 3.2

  Path: / Volumes/Flash Media Live Encoder 3.2/payloads/AdobeFMLE4All/AdobeFMLE4All.dmg

  -Updated media Sources - the END-

  Support for the version of COAST range: [0.0.66.0,3.0.116.0]

  -CreatePayloadSession: the machine is x 86-

  _ Check _ subscribers dependence

  Setting the property "INSTALLDIR": / Applications/Adobe

  Affecting the "installLanguage" property: en_US

  Try to find the language in all of the languages of the payload available

  Setting the 'installSourcePath' property: Volumes/Flash Media Live Encoder 3.2

  Replace the "userASUPath" property to: / Users/Floorfucker/Applications/Adobe/OOBE/PDApp

  Find actions of payload:

  Decide which mode of installation to use...

  Setting START asked actions of payload

  Value returned by searches for payload: {BAEDFDDE-826B-4692-9C88-F7795E47DA9F} is Adobe Flash Media Live Encoder: false

  Chain of action for {BAEDFDDE-826B-4692-9C88-F7795E47DA9F} Adobe Flash Media Live Encoder is installed

  Setting END asked actions of payload

  Were collected advanced path check to INSTALLDIR

  INSTALLDIR is a correct path

  INSTALLDIR is not the root path

  INSTALLDIR is on a local volume

  INSTALLDIR is on a volume that is accessible in writing

  INSTALLDIR is not on a case-sensitive volume

  INSTALLDIR successful path validation database path: / Applications/Adobe

  Payloads were committed before the flight.

  [0] Tue Jan 12 02:13:23 ERROR 2016

  Entry ARP could not be created for the language: en

  [0] Tue Jan 12 02:13:23 2016 INFO

  : TIMER END: [Total Timer] took 782 miliseconds (0,782 seconds) DTR = 94219,9 Kbps (92,0117 Mbps)

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 1 Error (s), 0 warning (s)

  ERROR: ARP entry could not be created for the language: en

  Search for the same string above to find where the error occurred.

  -------------------------------------------------------------------------------------

  Exit code: 7 - could not complete the silent workflow

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  END - Installer Session

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  Visit http://www.Adobe.com/go/loganalyzer/ for more information

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  START - Installer Session

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  Version of RIBS: 3.0.116.0

  The OSX version: 10.11.2

  : TIMER: [Total timer]

  CHECK: Single Instance

  CHECK: credentials

  Load deployment file

  Create required folders

  Assuming the installation mode

  : TIMER: [boot]

  Perform the boot...

  : TIMER END: [Bootstrap] had 828 milliseconds (0,828 seconds) DTR = 92864,7 Kbps (90,6882 Mbps)

  Search for path source install

  Media Sync DB...

  : TIMER: [synchronize media DB]

  Pre check media db sync

  End of pre check media db sync. Exit code: 0

  : TIMER END: [media DB Sync] took 0 milliseconds (0 seconds) DTR = inf Kbps (inf Mbps)

  Ready to initialize the session started by...

  : TIMER: [CreatePayloadSession]

  -START - updated media Sources - BEGIN-

  Update source path: Volumes/Flash Media Live Encoder 3.2

  Update media info for: {BAEDFDDE-826B-4692-9C88-F7795E47DA9F}

  Type: order 1, volume: 1, media: Flash Media Live Encoder 3.2

  Path: / Volumes/Flash Media Live Encoder 3.2/payloads/AdobeFMLE4All/AdobeFMLE4All.dmg

  -Updated media Sources - the END-

  Support for the version of COAST range: [0.0.66.0,3.0.116.0]

  -CreatePayloadSession: the machine is x 86-

  _ Check _ subscribers dependence

  Setting the property "INSTALLDIR": / Applications/Adobe

  Affecting the "installLanguage" property: en_US

  Try to find the language in all of the languages of the payload available

  Setting the 'installSourcePath' property: Volumes/Flash Media Live Encoder 3.2

  Replace the "userASUPath" property to: / Users/Floorfucker/Applications/Adobe/OOBE/PDApp

  Find actions of payload:

  Decide which mode of installation to use...

  Setting START asked actions of payload

  Value returned by searches for payload: {BAEDFDDE-826B-4692-9C88-F7795E47DA9F} is Adobe Flash Media Live Encoder: false

  Chain of action for {BAEDFDDE-826B-4692-9C88-F7795E47DA9F} Adobe Flash Media Live Encoder is installed

  Setting END asked actions of payload

  Were collected advanced path check to INSTALLDIR

  INSTALLDIR is a correct path

  INSTALLDIR is not the root path

  INSTALLDIR is on a local volume

  INSTALLDIR is on a volume that is accessible in writing

  INSTALLDIR is not on a case-sensitive volume

  INSTALLDIR successful path validation database path: / Applications/Adobe

  Payloads were committed before the flight.

  [0] Tue Jan 12 02:19:40 ERROR 2016

  Entry ARP could not be created for the language: en

  [0] Tue Jan 12 02:19:40 2016 INFO

  : TIMER END: [Total Timer] took 862 miliseconds (0,862 seconds) DTR = 89313,2 Kbps (87,2199 Mbps)

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 1 Error (s), 0 warning (s)

  ERROR: ARP entry could not be created for the language: en

  Search for the same string above to find where the error occurred.

  -------------------------------------------------------------------------------------

  Exit code: 7 - could not complete the silent workflow

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  END - Installer Session

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  Visit http://www.Adobe.com/go/loganalyzer/ for more information

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  START - Installer Session

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  Version of RIBS: 3.0.116.0

  The OSX version: 10.11.2

  : TIMER: [Total timer]

  CHECK: Single Instance

  CHECK: credentials

  Load deployment file

  Create required folders

  Assuming the installation mode

  : TIMER: [boot]

  Perform the boot...

  : TIMER END: [Bootstrap] had 985 milliseconds (0,985 seconds) DTR = 8,12183 Kbps (0.00793147 Mbps)

  Search for path source install

  Media Sync DB...

  : TIMER: [synchronize media DB]

  Pre check media db sync

  End of pre check media db sync. Exit code: 0

  : TIMER END: [media DB Sync] took 5 milliseconds (0.005 seconds)

  Ready to initialize the session started by...

  : TIMER: [CreatePayloadSession]

  -START - updated media Sources - BEGIN-

  Update source path: Volumes/Flash Media Live Encoder 3.2

  Update media info for: {BAEDFDDE-826B-4692-9C88-F7795E47DA9F}

  Type: order 1, volume: 1, media: Flash Media Live Encoder 3.2

  Path: / Volumes/Flash Media Live Encoder 3.2/payloads/AdobeFMLE4All/AdobeFMLE4All.dmg

  -Updated media Sources - the END-

  Support for the version of COAST range: [0.0.66.0,3.0.116.0]

  -CreatePayloadSession: the machine is x 86-

  _ Check _ subscribers dependence

  Setting the property "INSTALLDIR": / applications

  Affecting the "installLanguage" property: en_US

  Try to find the language in all of the languages of the payload available

  Setting the 'installSourcePath' property: Volumes/Flash Media Live Encoder 3.2

  Replace the "userASUPath" property to: / Users/Floorfucker/Applications/Adobe/OOBE/PDApp

  Find actions of payload:

  Decide which mode of installation to use...

  [0] Tue Jan 12 02:27:37 2016 INFO

  Setting START asked actions of payload

  Value returned by searches for payload: {BAEDFDDE-826B-4692-9C88-F7795E47DA9F} is Adobe Flash Media Live Encoder: false

  Chain of action for {BAEDFDDE-826B-4692-9C88-F7795E47DA9F} Adobe Flash Media Live Encoder is installed

  Setting END asked actions of payload

  Were collected advanced path check to INSTALLDIR

  INSTALLDIR is a correct path

  INSTALLDIR is not the root path

  INSTALLDIR is on a local volume

  INSTALLDIR is on a volume that is accessible in writing

  INSTALLDIR is not on a case-sensitive volume

  INSTALLDIR successful path validation database path: / applications

  Payloads were committed before the flight.

  [0] Tue Jan 12 02:27:37 ERROR 2016

  Entry ARP could not be created for the language: en

  [0] Tue Jan 12 02:27:37 2016 INFO

  : TIMER END: [Total Timer] took 1019 milliseconds (1,019 seconds) DTR = 11,7763 Kbps (0,0115002 Mbps)

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 1 Error (s), 0 warning (s)

  ERROR: ARP entry could not be created for the language: en

  Search for the same string above to find where the error occurred.

  -------------------------------------------------------------------------------------

  Exit code: 7 - could not complete the silent workflow

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  END - Installer Session

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  Visit http://www.Adobe.com/go/loganalyzer/ for more information

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  START - Installer Session

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  Version of RIBS: 3.0.116.0

  The OSX version: 10.11.2

  : TIMER: [Total timer]

  CHECK: Single Instance

  CHECK: credentials

  Load deployment file

  Create required folders

  Assuming the installation mode

  : TIMER: [boot]

  Perform the boot...

  : TIMER END: [Bootstrap] took 997 miliseconds (0,997 seconds) DTR = 4,01204 Kbps (0,003918 Mbps)

  Search for path source install

  Media Sync DB...

  : TIMER: [synchronize media DB]

  Pre check media db sync

  End of pre check media db sync. Exit code: 0

  : TIMER END: [media DB Sync] took 9 milliseconds (0,009 seconds)

  Ready to initialize the session started by...

  : TIMER: [CreatePayloadSession]

  -START - updated media Sources - BEGIN-

  Update source path: Volumes/Flash Media Live Encoder 3.2

  Update media info for: {BAEDFDDE-826B-4692-9C88-F7795E47DA9F}

  Type: order 1, volume: 1, media: Flash Media Live Encoder 3.2

  Path: / Volumes/Flash Media Live Encoder 3.2/payloads/AdobeFMLE4All/AdobeFMLE4All.dmg

  -Updated media Sources - the END-

  Support for the version of COAST range: [0.0.66.0,3.0.116.0]

  -CreatePayloadSession: the machine is x 86-

  _ Check _ subscribers dependence

  Setting the property "INSTALLDIR": / Applications/Adobe

  Affecting the "installLanguage" property: en_US

  Try to find the language in all of the languages of the payload available

  Setting the 'installSourcePath' property: Volumes/Flash Media Live Encoder 3.2

  Replace the "userASUPath" property to: / Users/Floorfucker/Applications/Adobe/OOBE/PDApp

  Find actions of payload:

  Decide which mode of installation to use...

  Setting START asked actions of payload

  Value returned by searches for payload: {BAEDFDDE-826B-4692-9C88-F7795E47DA9F} is Adobe Flash Media Live Encoder: false

  Chain of action for {BAEDFDDE-826B-4692-9C88-F7795E47DA9F} Adobe Flash Media Live Encoder is installed

  Setting END asked actions of payload

  Were collected advanced path check to INSTALLDIR

  INSTALLDIR is a correct path

  INSTALLDIR is not the root path

  INSTALLDIR is on a local volume

  INSTALLDIR is on a volume that is accessible in writing

  INSTALLDIR is not on a case-sensitive volume

  INSTALLDIR successful path validation database path: / Applications/Adobe

  Payloads were committed before the flight.

  [0] Tue Jan 12 02:31:37 ERROR 2016

  Entry ARP could not be created for the language: en

  [0] Tue Jan 12 02:31:37 2016 INFO

  : TIMER END: [Total Timer] took 1037 milliseconds (1.037 seconds) DTR = 7,71456 Kbps (0.00753375 Mbps)

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 1 Error (s), 0 warning (s)

  ERROR: ARP entry could not be created for the language: en

  Search for the same string above to find where the error occurred.

  -------------------------------------------------------------------------------------

  Exit code: 7 - could not complete the silent workflow

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  END - Installer Session

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  Visit http://www.Adobe.com/go/loganalyzer/ for more information

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  START - Installer Session

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  Version of RIBS: 3.0.116.0

  The OSX version: 10.11.2

  : TIMER: [Total timer]

  CHECK: Single Instance

  CHECK: credentials

  Load deployment file

  Create required folders

  Assuming the installation mode

  : TIMER: [boot]

  Perform the boot...

  : TIMER END: [Bootstrap] took 1180 milliseconds (1.18 seconds) DTR = 3,38983 Kbps (0.00331038 Mbps)

  Search for path source install

  Media Sync DB...

  : TIMER: [synchronize media DB]

  Pre check media db sync

  End of pre check media db sync. Exit code: 0

  : TIMER END: [media DB Sync] took 6 milliseconds (0.006 seconds)

  Ready to initialize the session started by...

  : TIMER: [CreatePayloadSession]

  -START - updated media Sources - BEGIN-

  Update source path: Volumes/Flash Media Live Encoder 3.2

  Update media info for: {BAEDFDDE-826B-4692-9C88-F7795E47DA9F}

  Type: order 1, volume: 1, media: Flash Media Live Encoder 3.2

  Path: / Volumes/Flash Media Live Encoder 3.2/payloads/AdobeFMLE4All/AdobeFMLE4All.dmg

  -Updated media Sources - the END-

  Support for the version of COAST range: [0.0.66.0,3.0.116.0]

  -CreatePayloadSession: the machine is x 86-

  _ Check _ subscribers dependence

  Setting the property "INSTALLDIR": / Applications/Adobe

  Affecting the "installLanguage" property: en_US

  Try to find the language in all of the languages of the payload available

  Setting the 'installSourcePath' property: Volumes/Flash Media Live Encoder 3.2

  Replace the "userASUPath" property to: / Users/Floorfucker/Applications/Adobe/OOBE/PDApp

  Find actions of payload:

  Decide which mode of installation to use...

  Setting START asked actions of payload

  Value returned by searches for payload: {BAEDFDDE-826B-4692-9C88-F7795E47DA9F} is Adobe Flash Media Live Encoder: false

  Chain of action for {BAEDFDDE-826B-4692-9C88-F7795E47DA9F} Adobe Flash Media Live Encoder is installed

  Setting END asked actions of payload

  Were collected advanced path check to INSTALLDIR

  INSTALLDIR is a correct path

  INSTALLDIR is not the root path

  INSTALLDIR is on a local volume

  INSTALLDIR is on a volume that is accessible in writing

  INSTALLDIR is not on a case-sensitive volume

  INSTALLDIR successful path validation database path: / Applications/Adobe

  Payloads were committed before the flight.

  [0] Tue Jan 12 02:38:52 ERROR 2016

  Entry ARP could not be created for the language: en

  [0] Tue Jan 12 02:38:52 2016 INFO

  : TIMER END: [Total Timer] took 1228 milliseconds (1,228 seconds) DTR = 6,51466 Kbps (0.00636197 Mbps)

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 1 Error (s), 0 warning (s)

  ERROR: ARP entry could not be created for the language: en

  Search for the same string above to find where the error occurred.

  -------------------------------------------------------------------------------------

  Exit code: 7 - could not complete the silent workflow

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  END - Installer Session

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  Visit http://www.Adobe.com/go/loganalyzer/ for more information

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  START - Installer Session

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  Version of RIBS: 3.0.116.0

  The OSX version: 10.11.2

  : TIMER: [Total timer]

  CHECK: Single Instance

  CHECK: credentials

  Load deployment file

  Create required folders

  Assuming the installation mode

  : TIMER: [boot]

  Perform the boot...

  : TIMER END: [Bootstrap] took 2516 milliseconds (2,516 seconds) DTR = 7,94913 Kbps (0.00776282 Mbps)

  Search for path source install

  Media Sync DB...

  : TIMER: [synchronize media DB]

  Pre check media db sync

  End of pre check media db sync. Exit code: 0

  : TIMER END: [media DB Sync] took 9 milliseconds (0,009 seconds)

  Ready to initialize the session started by...

  : TIMER: [CreatePayloadSession]

  -START - updated media Sources - BEGIN-

  Update source path: Volumes/Flash Media Live Encoder 3.2

  Update media info for: {BAEDFDDE-826B-4692-9C88-F7795E47DA9F}

  Type: order 1, volume: 1, media: Flash Media Live Encoder 3.2

  Path: / Volumes/Flash Media Live Encoder 3.2/payloads/AdobeFMLE4All/AdobeFMLE4All.dmg

  -Updated media Sources - the END-

  Support for the version of COAST range: [0.0.66.0,3.0.116.0]

  -CreatePayloadSession: the machine is x 86-

  _ Check _ subscribers dependence

  Setting the property "INSTALLDIR": / Applications/Adobe

  Affecting the "installLanguage" property: en_US

  Try to find the language in all of the languages of the payload available

  Setting the 'installSourcePath' property: Volumes/Flash Media Live Encoder 3.2

  Replace the "userASUPath" property to: / Users/Floorfucker/Applications/Adobe/OOBE/PDApp

  Find actions of payload:

  Decide which mode of installation to use...

  Setting START asked actions of payload

  Value returned by searches for payload: {BAEDFDDE-826B-4692-9C88-F7795E47DA9F} is Adobe Flash Media Live Encoder: false

  Chain of action for {BAEDFDDE-826B-4692-9C88-F7795E47DA9F} Adobe Flash Media Live Encoder is installed

  Setting END asked actions of payload

  Were collected advanced path check to INSTALLDIR

  INSTALLDIR is a correct path

  INSTALLDIR is not the root path

  INSTALLDIR is on a local volume

  INSTALLDIR is on a volume that is accessible in writing

  INSTALLDIR is not on a case-sensitive volume

  INSTALLDIR successful path validation database path: / Applications/Adobe

  Payloads were committed before the flight.

  [0] Tue Jan 12 02:42:30 ERROR 2016

  Entry ARP could not be created for the language: en

  [0] Tue Jan 12 02:42:30 INFO 2016

  : TIMER END: [Total Timer] took 2559 milliseconds (2,559 seconds) DTR = 9,37866 Kbps (0.00915885 Mbps)

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 1 Error (s), 0 warning (s)

  ERROR: ARP entry could not be created for the language: en

  Search for the same string above to find where the error occurred.

  -------------------------------------------------------------------------------------

  Exit code: 7 - could not complete the silent workflow

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  END - Installer Session

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  Visit http://www.Adobe.com/go/loganalyzer/ for more information

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  START - Installer Session

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  Version of RIBS: 3.0.116.0

  The OSX version: 10.11.2

  : TIMER: [Total timer]

  CHECK: Single Instance

  CHECK: credentials

  Load deployment file

  Create required folders

  Assuming the installation mode

  : TIMER: [boot]

  Perform the boot...

  : TIMER END: [Bootstrap] took 1012 milliseconds (1.012 seconds) DTR = 3,95257 Kbps (0.00385993 Mbps)

  Search for path source install

  Media Sync DB...

  : TIMER: [synchronize media DB]

  Pre check media db sync

  End of pre check media db sync. Exit code: 0

  : TIMER END: [media DB Sync] took 5 milliseconds (0.005 seconds)

  Ready to initialize the session started by...

  : TIMER: [CreatePayloadSession]

  -START - updated media Sources - BEGIN-

  Update source path: Volumes/Flash Media Live Encoder 3.2

  Update media info for: {BAEDFDDE-826B-4692-9C88-F7795E47DA9F}

  Type: order 1, volume: 1, media: Flash Media Live Encoder 3.2

  Path: / Volumes/Flash Media Live Encoder 3.2/payloads/AdobeFMLE4All/AdobeFMLE4All.dmg

  -Updated media Sources - the END-

  Support for the version of COAST range: [0.0.66.0,3.0.116.0]

  -CreatePayloadSession: the machine is x 86-

  _ Check _ subscribers dependence

  Setting the property "INSTALLDIR": / Applications/Adobe

  Affecting the "installLanguage" property: en_US

  Try to find the language in all of the languages of the payload available

  Setting the 'installSourcePath' property: Volumes/Flash Media Live Encoder 3.2

  Replace the "userASUPath" property to: / Users / ~ ~ ~ / Applications/Adobe/OO

  Find actions of payload:

  Decide which mode of installation to use...

  Setting START asked actions of payload

  Value returned by searches for payload: {BAEDFDDE-826B-4692-9C88-F7795E47DA9F} is Adobe Flash Media Live Encoder: false

  Chain of action for {BAEDFDDE-826B-4692-9C88-F7795E47DA9F} Adobe Flash Media Live Encoder is installed

  Setting END asked actions of payload

  Were collected advanced path check to INSTALLDIR

  INSTALLDIR is a correct path

  INSTALLDIR is not the root path

  INSTALLDIR is on a local volume

  INSTALLDIR is on a volume that is accessible in writing

  INSTALLDIR is not on a case-sensitive volume

  INSTALLDIR successful path validation database path: / Applications/Adobe

  Payloads were committed before the flight.

  [0] Tue Jan 12 02:56:36 ERROR 2016

  Entry ARP could not be created for the language: en

  [0] Tue Jan 12 02:56:36 2016 INFO

  : TIMER END: [Total Timer] took 1051 milliseconds (1,051 seconds) DTR = 7,6118 Kbps (0,0074334 Mbps)

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 1 Error (s), 0 warning (s)

  ERROR: ARP entry could not be created for the language: en

  Search for the same string above to find where the error occurred.

  -------------------------------------------------------------------------------------

  Exit code: 7 - could not complete the silent workflow

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  END - Installer Session

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  Hello

  Please see errors 'Exit Code 6' and ' exit 7 "Code install Adobe Creative Cloud, CS6 and CS5.5 .

  Hope that helps!

  Kind regards

  Sheena

• NET framework 1 installation fail code 0xe0434fd4

  received this code, 0xe0434fd4, after failed update of the net framework SP1 from Microsoft Update Center.  Tried reinstalling several times and received the same code.

  All other downloads install perfectly.

  correct the code number: "0xe0434f4d.

  Security has been disabled

  ServicePack had no number of KB

  Hello

   
   
  1. What is the number KB update failed?
  2 is the issue confined to a particular update?
  3 have you tried to manually install the update?
   
   
  Please provide us with the correct error code that you receive.
  0xe0434fd4 seems to be an incorrect error code.
   
  Method 1: temporarily disable the security software...
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  
   
  Method 2:  You can start the computer to clean the start state, and then try to download the update
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note: after you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.
   
   
  Method 3:  You can also install the update manually and check.
  You can go to http://www.microsoft.com/download and use the number of the update and try to download and install the update.
   
   
   
   

• Skype installation failure - code 1601

  Hello

  I am running Windows Vista Home Premium, Service Pack 2.

  I'm making s Skype upgrade, but seeing this:

  Any ideas?

  Chris

  Hello

  1 What is the exact error message?

  2 are you able to install other programs?

   

  Method 1: Check out the Microsoft article for common installation problems

  See the following site:

  http://support.microsoft.com/kb/2438651.

  Method 2: Unsubscribe and re - register the Windows Installer

  a. Click Start, type MSIEXEC /Unregister. (Note the space after MSIEXEC) and press enter

  b. even once, click Start, type MSIEXEC/REGSERVER and press ENTER.

  Now, check if the problem persists.

• Update installation failed: Code c 8007371

  Several times tonight, I tried to install an update from Microsoft.  Whenever I get the code shown in the above title.
  How can I get the update to install?
  I use a Vista SP2 with 32-bit...

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/aeb7abd4-73c6-403b-9c43-bce64193a1af/

  See if the information above solves the problem.

  Otherwise:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Failed to install the new update

  01/02/2016 / 21.05 after the removal of "Skype for desktop PC", I can not download a new "Skype for Office.» 7.17.0.106, but to get the messages: "an older version of Skype 7.17 cannot be deleted", "please contact technical support", "Skype has failed, code 1603" "a fatal crash occurred by a facility". "." I can't find more than any area of Skype file. Join the conversation today and think I should use "Regedt32, but dare not to do so. Help, please. Kind regards

  You can use this removal tool:

  http://www.pcdust.com/downloads/SRT/SRT.exe

  Then, reinstall the latest version of Skype:

  Skype download (like full)

• Creating cloud 'Installation Failed'

  I don't know what really is the 'Creative cloud' app, except that it's apparently something new tonight. I tried several times up to now, and I always get the opinion of 'Installation failed'.

  Other new applications CC have downloaded and installed properly.

  There is a link "More details." under "Installation Failed" (in the App Mgr) notice, but it goes only on a VIRGIN webpage.

  :-(  -- ???

  Leave your existing Adobe Application Manager and re-launch. It will be updated with the new creative cloud application and then you'll see the CC apps for download.

  In case you are a new user, go to creative.adobe.com and try to download apps from there and it will in turn download the new installer from creative cloud and install the desired applications.

  Install the latest applications CC and check if it works very well.

  Let us know in case of problems.

• installation failed for cc, error code: 1 - tried all laptop troubleshooting, new and previously installed before doing a system restore...

  So I'm running a new laptop with 64-bit Windows 8.1.

  I installed creative cloud when I arrived to the laptop and it was fine, no problem!

  I then had to perform a restore of the system because some automatic updates, which caused problems.   Now when I try to install again creative cloud, it downloads and then the second, he starts to try to install, I get the installation failed, error code: 1 message.

  I have tried all troubleshooting, which is to run the Adobe CC cleaning tool, restart the system, download CC, run as administrator, same error code: 1 message.

  I am also running as user administrator so nothing to do with it.

  I have no idea which continues to cause this, have tried everything suggested without success, and the must frustrating, is that once he has actually worked!  My laptop is completely up-to-date with all windows, events, recommended, and optional updates.

  Please can someone help me?

  I really appreciate your answer fast to my query and please don't take this the wrong way, however I stated clearly my opening message that the solutions proposed in the link you sent me in case of problems did not and yet you have sent to me in any case what is frustrating, as I hoped I had taken the time to explain what I had already tried without success as clearly as possible.  Your suggestion to search the forums for other solutions was my last course of action before coming to my last resort to put the request here for expert advice.  I understand that many folk do not do this on the forums so I don't understand your direction here but unfortunately in my case it didn't there no alternative solutions to my problem in the forum.

  Fortunately after hitting my head on the wall for the last 4 hours, I managed to find the solution for me and I want to share it for the sake of others who may be in the same position.

  The problem revolves around turning off the obligation to enter a password when you turn on the computer and enter windows 8.1.  Even if you are still an administrator and car windows of the signs that you, this seems at odds with the Adobe Creative Cloud installation process.

  To remedy the situation:

  Hold the Windows key and press R.

  Type NETPLWIZ and press ok/return.

  Click on the check box besides "users must enter a user name and password to use this computer" to ensure that a tick is visible.

  Now when your restart the computer, you will need to enter your password before windows starts.  Download Adobe CC and install.  Problem solved.

  For what it's worth, I did use the cleaning tool Adobe CC as well before the restart and install but I doubt that this is necessary (and certainly did not help at all until I have reactivated the password on windows starts).

  I'm sure it's just windows being usually a pain and not really for lack of Adobe, but it must be said that I had no such problems with other software downloads and installations to date.

  I hope that is a valuable feedback to Adobe and will help them avoid an unnecessary barrier to new customers who buy their products.  I must admit, I was near you are looking for software elsewhere.

• DVD player does not appear error - the driver may be corrupted or missing. Code 39, fix the driver installation fails, virtual drives don't work - same results if the material under tension

  Original title: drive does not appear, difficulty he pilot installation fails, virtual drives don't work - same results if the material under tension

  A few weeks ago, as my two DVD players (the two Samsung Lightscribe SH-S223Q of) disappeared after a repair installed, I did for the other problems (not sure if it was directly after installation because I don't notice it right away, but it was no doubt). In Device Manager, it gives the message:

  "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  I tried the Microsoft Fix It tool (Mats_Run.dvd.exe) that detects the problem and says "Install device driver" in a popup, but then he says "software device driver failed to installed. At the end it says under the issue, the "CD/DVD drive is not detected" and the status of Fix 'not set '. Note that, when I boot from another hard drive (with Vista 64 on it installed from the same DVD, just a new installation) disks appear very well. Also I can boot from the drive as well.

  I can't do a repair installation, since it must initiate Windows, and I can't load the disc. I tried to update my BIOS but that has no effect.

  Recently I actually moved this hard drive to another one, with another brand of hard drive and all the rest. Just like before, if I boot from another hard drive (this one with Windows 7), the drive unit-a Optiarc AD-7230 s - looks and works, and I can also boot from the drive at startup. But since the drive hard as I want to use, the drive does not appear. Fix it, etc. Device Manager gives the same messages as before.

  I tried virtual drives - Daemon Tools Lite and Virtual Clonedrive. When I try to add virtual devices to help, nothing happens. The new drive will be displayed in the Manager of devices, but with the same error Code 39 as the real drive.

  What are my options at this point? How can I get the drive to appear or to fix my copy of Windows?

  I could solve this problem. I started in Ubuntu and deleted the existing cdrom.sys, cdrom.inf etc. files (as in Windows, they were protected and I couldn't delete them), then I copied the files from another installation of Vista I had on another hard drive. After having done that, I updated the drivers in device, disabled/enabled readers and readers management that presented themselves.

• Installation fails with error code 1603

  [The update by the moderator topic title should be more descriptive. [Was: "Please help me"]

  I use Skype every day to talk to my friends and he says I need to update some time ago but it does not, but I thought it wouldn't matter and I could still use the old version but now it says I should use the most recent version, but it won't let me download it. I go through the thing of launcher update until where it says "Please wait while Skype is installed. This may take a few minutes"and then a little box pops up saying"Installing Skype failed; code 1603. a fatal error during installation occurered. "I click 'ok' and it closes, so now I can't use Skype so that I can't talk to my friends! Help, please

  You should not extract these files directly in the installation of Skype folder, but first extract them to any folder on your computer (a folder where you have unlimitted access), and then move the extracted files to the installation of Skype folder.

  That's how I'm always "update" my installations of Skype.

• When you install Visual Studio 2005 (Standard Edition) on my Vista system, the installation fails because of this error: there is no disc in the drive. Insert a disk in drive \device\harddisk5\dr5

  When you install Visual Studio 2005 (Standard Edition) on my Vista system, the installation fails because of this error: there is no disc in the drive. Please insert a disk into drive \device\harddisk5\dr5.
  My C: drive is my main area on the HARD disk.  The D: is the original Image. There are 5 locations of media FJ. the CD/DVD is E:. I have several USB ports, and a Magic Jack plugged into one of them..., printers, scanners, mouse and keyboard are also USB
  Are installed:
  FW MS .NET 1.1
  MRS. NST FW 3.5 sp1
  MS SQL Server 2005
  MS SQL Server 2005 compact Edition [ENU]
  MS SQL Server 2005 Native Client
  MS SQL Server Setup Support Files
  MS SQL Server VSS writer

  Here is the error log:
  [06/14/11, 13: 52:00] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] error code 1603 for this component means "Fatal error during installation." [06/14/11, 13: 52:00] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] Setup failed on component Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) [14/06/11 13: 52:01] setup.exe: ISetupComponent::Pre/Post/Install() [2] failed in ISetupManager::InstallManagerHelper() with HRESULT-2147023293. [06/14/11, 13: 52:01] setup.exe: [2] error component not specified in ISetupManager::AddToActionResultCollection() string [14/06/11 13: 52:12] VS70pgui: DepCheck [2] indicates that Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) is not installed. [06/14/11, 13: 52:12] VS70pgui: component [2] Unknown status double Visual Studio 2005 Remote Debugger Light (x 64) [14/06/11 13: 52:12] VS70pgui: status unknown double component [2] Document Explorer 2005 [06/14/11, 13: 52:12] VS70pgui: DepCheck [2] indicates Microsoft Visual Studio 2005 Standard Edition - ENU was not attempted to be installed. [06/14/11, 13: 52:12] VS70pgui: component [2] Unknown status for.NET Compact Framework 1.0 SP3 [14/06/11, 13: 52:12] VS70pgui: [2] for.NET status unknown component Compact Framework 2.0 [14/06/11, 13: 52:12] VS70pgui: [2] double of unknown status component Visual J# 2.0 Redistributable Package [14/06/11, 13: 52:12] VS70pgui: [2] status unknown forSQL component Server 2005 Mobile Edition [14/06/11 [, 13: 52:12] VS70pgui: [2] double of unknown status component Microsoft Device Emulator version 1.0 [14/06/11, 13: 52:12] VS70pgui: component [2] unknown status double SQL Server 2005 Express Edition x 64 [14/06/11, 13: 52:12] VS70pgui: [2] component unknown status .NET Framework 2.0 SDK (x 64) double [14/06/11, 14: 34:40] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) : [2] error code 1603 for this component means "Fatal error during installation." [06/14/11, 14: 34:40] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] Setup failed on component Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) [14/06/11 14:34:42] setup.exe: ISetupComponent::Pre/Post/Install() [2] failed in ISetupManager::InstallManagerHelper() with HRESULT-2147023293. [06/14/11, 14:34:42] setup.exe: [2] error component not specified in ISetupManager::AddToActionResultCollection() string [14/06/11, 14: 34:52] VS70pgui: DepCheck [2] indicates that Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) is not installed. [06/14/11, 14: 34:52] VS70pgui: component [2] Unknown status double Visual Studio 2005 Remote Debugger Light (x 64) [14/06/11, 14: 34:52] VS70pgui: status unknown double component [2] Document Explorer 2005 [06/14/11, 14: 34:52] VS70pgui: DepCheck [2] indicates Microsoft Visual Studio 2005 Standard Edition - ENU was not attempted to be installed. [06/14/11, 14: 34:52] VS70pgui: component [2] Unknown status for.NET Compact Framework 1.0 SP3 [14/06/11, 14: 34:52] VS70pgui: [2] for.NET status unknown component Compact Framework 2.0 [14/06/11, 14: 34:52] VS70pgui: [2] double of unknown status component Visual J# 2.0 Redistributable Package [14/06/11, 14: 34:52] VS70pgui: [2] status unknown forSQL component Server 2005 Mobile Edition [14/06/11 [14: 34:52] VS70pgui: [2] double of unknown status component Microsoft Device Emulator version 1.0 [14/06/11, 14: 34:52] VS70pgui: component [2] unknown status double SQL Server 2005 Express Edition x 64 [14/06/11, 14: 34:52] VS70pgui: [2] double status unknown component .NET Framework 2.0 SDK (x 64)

  Try to post or search the MSDN Forums

  http://social.msdn.Microsoft.com/forums/en-us/vssetup/threads

  http://social.msdn.Microsoft.com/forums/en-us/Vsexpressinstall/threads

  There are indications that some USB devices may cause this error. Try unplugging as much as you can.

• Having trouble installing Java 8 on my windows computer 8. Continuously getting error code 1632 before installation begins.

  I try to install java s.-e. 8 64 bit on my 64-bit windows operating system 8. I confirmed that I'm under 64-bit windows. Even before the start of the installation, I get the error code 1632. I ran into this error code above all when trying to install paint.net, and the installer still tells me to confirm that I have sufficient space in the temporary file and that it is writable by me. I confirmed that the file is there, I have confirmed it is not complete, I myself gave all the permissions on the folder and named my profile as the owner. Yet I always get this error whenever I try to install Java or paint.net. Please help me solve this problem, I do not have a recovery of system return point who is able to fix this problem.

  On another note, I tried to copy the Java folder installed from a USB Pendrive in my x 86 program folder, but windows won't recognize it's there. I am trying to run Minecraft, but it says installation theregistry does not exist for Java runtime environment (I had java on my computer before, but I uninstalled it to re install the 64-bit version), so I don't know if he is still trying to run it from the previous installation of Java path but I also changed the PATH system variable to include the installation but folder to any measure of relief that she has no effect.

  Once again, any help that corrects any of these questions would be greatly appreciated

  Thank you

  I myself corrected actually last night, if you look at the error code 1632 its related to the C:\windows\installer folder and be unwritable, in my case the folder itself had somehow entrenched and only a broken shortcut is still at it... I have no how this happened, possibly malware or inadvertent user action (its on a server with a single user using remote desktop)

  I recreated a new installation folder in C:\windows, make sure that I could write in it and reinstalled java using offline Installer and deleted the old versions, no errors and all workers.

  hope this helps someone

  concerning

• Creative cloud Apps (Photoshop CC) 'The Installation failed' error Code 7

  Recently I've just upgraded to windows 7 10, and in the process, I uninstalled my Photoshop CS6. After the upgrade is finished, I headed to the adobe website to install Photoshop once more, soon for a new creative cloud service. I decided to try it with a trial for now, to see if I could buy later. I launched the installer of creative cloud, and once it was done, I clicked on the try button next to Photoshop, as well as other programs such as first and hearing that I used to have in the past. A few days in the new creative versions cloud was pretty cool, and I liked my fair use of it. Unfortunately a few days later I walked directly into a virus online and random programs began to install on my desktop. I panicked! I decided to do a restore of the system on my machine for a few days earlier, (unfortunately the timestamp was set before I installed all new adobe programs ) scanned for viruses and malware and cleaned my machine once more. After I did, I installed the installer of creative cloud again to see now that it was the fate by a few seconds in. I was confused, so I made online searches to quickly find this "creative cloud cleaning tool" provided by adobe. Gave him a quick run, cleaned up all the old files that remained, and installed right accelerated through good as new again. Shortly after I clicked the button 'Try' next to Photoshop, it went through the entire download process and then display in orange text, «Installation Failed - more». Only, this became more frustrated at the minute... I decided to try the same installation process on the first, and it's the same thing; «Failed to install - more». I decided to click on learn more to soon find text read, ' errors occurred during installation ' (7) I studied this Error Code 7and he said to try to install your applications through safe mode with network. STILL NO LUCK. I gave up at this point, and I can help the community! Thank you

  Images

  

  Plug

  Processor	Intel Core i5 - 3570 K CPU @ 3.40 GHz
  Video card	AMD Radeon 200 R9 series
  Memory	8. 0 GB
  Operating system	Microsoft Windows 10 (build 10586), 64 - bit

  UPDATE

  After a fast delivery on my windows (keeping all my files of course), photoshop and other programs from adobe installed without a scratch! Thanks John!