Skype name not found

Similar Questions

• [Microsoft] [ODBC driver manager] Data Source name not found and no driver by default specified

  Hi team,

  I am trying to connect to the Oracle 9i database using VB code below:

  strConnection = "Driver = {Microsoft ODBC for Oracle};" Server = SERVERNAME; UID = username; Pwd = PASSWORD"
  Connect = New ADODB. Connection
  Connect.Open (strConnection)

  The last line throws me below error:

  [Microsoft] [ODBC driver manager] Data Source name not found and no driver by default specified

  The VB code works well and able to connect to database server dev dev. The same script with the name of the UAT server does not work on server UAT.

  The servers are Windows server 2007-32 bit.

  When I checked the tab drivers in ODBC Data Source Administrator, dev server entry below:

  Microsoft ODBC for Oracle - 6.00.6001.18000 - Microsoft Corporation - MSORCL32.dll - Date

  Considering that the UAT server has entered below:

  Microsoft ODBC for Oracle-

  The Microsoft ODBC driver for oracle is listed in the tab UAT Server drivers, but did not have details of file version & dll. This driver is not installed correctly? If so, how the re install? Please help solve this problem as soon as POSSIBLE.

  Kind regards

  Tamil

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Lsass.exe system error object name not found, unable to start Windows in any mode.

  I am working on a friends computer who has a problem, it does not boot in any mode.  This includes everything and all alternate Mode without failure, last known good Configuration and other options in between.

  The computer is an old one but running Windows XP with Service Pack 3 and is updated from a few months ago.  He had a program to update AVG as well as several anti-spyware installed SpyBot, Adaware, and Malwarebytes programs.  Sometimes, the computer had a virus or spyware that was eventually deleted by the user with these programs in the past.

  I searched the internet for at least 8-10 hours looking for solutions without real success.  If not all of you with this problem, most eventually do a full reformat their hard drive.  This owner does not have a recovery disk (lost?) with their computer for that and they have important documents that they would be saved.  A solution (last resort) is to remove the hard drive and put it in my computer to copy documents on a cd/dvd.  It is very likely to buy a newer computer at this stage anyway, but needs these documents

  -----------------

  What happens is after the start screen of Windows, but before the Welcome screen, a box with the lsass.exe system error error: object name not found appears.  Clicking on it just restarts the computer to restart the process.

  I used a boot Norton cd to test the virus in case it might be this worm Sasser, sometimes associated with this error and it is clean. so I really doubt that this problem is associated with that.  Also used checks and drive to scan to check for errors.  Don't check, there is no way to go back to a previous restore point or configuration.

  Tried to use the recovery console out of my Windows XP installation disk: in this case I tried to develop a copy of the file lsass.exe on the hard drive, but it could not extend the file.  I tried several times with the same results.  Don't really know if that would have helped it worked.

  At this point, I'm really at a loss on how to continue.  Any suggestion would be appreciated and thanks in advance!

  Your friend's computer is not likely to be infected by the Sasser worm that this virus is many, many years now. Extract the data on the drive and do a clean install/factory restore of Windows. You can usually buy the mftr computer recovery media. (if an OEM brand like HP, Dell, etc.). low-cost. If you decide to reinstall Windows, test the material first to make sure it's healthy. Or skip reinstallation if your friend is going to buy a new computer and just take the data for him.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot
  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd, or copy it to an external hard drive. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.

  2. you can start the computer target with a Bart PE (XP only) or Linux Livecd such as Knoppix or Ubuntu and retrieve the data in this way. This has the additional advantage to tell you if the problems you are experiencing are hardware or software related because if the computer behaves perfectly in Linux, you know that Windows (software) is the culprit. Conversely, if the computer behaves badly under Linux, you will know that there is a hardware problem. This is general information on the use of Knoppix for the recovery of data when you do not have Windows:

  You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with enough capacity to contain your data OR an external USB hard drive. Download Knoppix .iso image file and create your bootable CD *. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or freeImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created and the Windows files will be visible under Linux. If you want to burn CD/DVD, there will be a Linux burning program to use.

  * If your computer has only an optical drive and you want to use this drive to burn data or need to test drive, you can create a USB bootable Linux instead of a bootable CD. This site will show you how to do it-http://www.pendrivelinux.com

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  See also - http://lifehacker.com/5504531/the-complete-guide-to-saving-your-windows-system-with-a-thumb-drive
  And for future disaster recovery programs - http://www.elephantboycomputers.com/page2.html#Backing_Up

  MS - MVP - Elephant Boy computers - don't panic!

• Error: database name not found and no default driver specified, installing a program and pay using the Microsoft access database.

  Original title: name not found and no data source driver by default specified

  Hi all, I tried to google search and try all methods that talk about the world. but I can't always solve this error for 1 week.
  I have install the program pays to computer A, and it works fine.
  But I install the same program to computer B, it gives me this error
  data source name not found and no driver specified default.
  the computer is windows 7 32 bit, and I did add the system DSN.
  It is using microsoft access database.

  does anyone have the solution for this?

  Thank you

  Hello

  The question you posted would be better suited for COMPUTING public Pro on TechNet. I would recommend posting your query in the TechNet Forums to get help:

  Office 2010 - IT Pro General Discussions TechNet Forums

  Let us know if you need help with Windows related issues. We will be happy to help you.

• NDMP server reported a general error (name not found?)

  Dear all,

  Oracle Secure Backup, I want to restore to the other way, but I got the error

  NDMP server reported a general error (name not found?)

  # State failed to 2013/09/16.15:45 - NDMP server reported a general error (name not found?) #.

  Thanks for your response

  OK, when you put it in the alternative path for restoration, you must list the name of the file too. You can see the original path on the left which includes the name of the file, so your other path should be something like ' / export/res_from_tap/thisfileisrestored.

  Thank you

  Rich

• Error in the COLMAP clause. Column name not found

  Hi guys,.
  
  I must be missing something simple here, but I can't understand it. I have a very simple test, I am trying to make. Remap the 1 table column in the other on replicat.
  
  I created the file defgens.
  *
  * Definitions created/modified 2013-02-12 13:08
  *
  * Description of the areas for each entry in the column:
  *
  * 1 name
  * Data type 2
  * 3 external length
  * Fetch 4 Offset
  * Level 5
  * 6 level
  * 7 null
  * 8 so strange bump
  * Inner length 9
  * 10 binary length
  * Length of the table 11
  * 12 most significant DT
  * 13 least significant DT
  * 14 high precision
  * 15 little specific
  * 16 point elementary
  * Occurs 17
  * Column 18 key
  * Data type of void 19
  *
  *
  Definition of table of BILLING. B1
  Length: 92
  SYSKEY: 0
  Columns: 2
  B_ID 64 50 0 0 0 1 0 50 50 50 0 0 0 0 1 0 1 2
  B_F_NAME 64 30 56 0 0 1 0 30 30 0 0 0 0 0 1 0 0 0
  End of definition
  *
  Definition of table of BILLING. B2
  Length: 92
  SYSKEY: 0
  Columns: 2
  B_ID 64 50 0 0 0 1 0 50 50 50 0 0 0 0 1 0 1 2
  B_L_NAME 64 30 56 0 0 1 0 30 30 0 0 0 0 0 1 0 1 0
  End of definition
  
  
  I installed the replicat read the sourcedefs and remap the columns
  
  -Identify the Replicat group:
  REPLICAT rxtest
  -State that the source and target definitions are identical:
  -ASSUMETARGETDEFS
  SOURCEDEFS /u12/oracle/golden_gate_11_rep/dirsql/defgen_billing.sql
  -Delete the installation program
  DISCARDFILE u12/oracle/golden_gate_11_rep/dirout/rxtest.txt, SERVING
  SETENV (NLS_LANG = 'AMERICAN_AMERICA. WE8MSWIN1252")
  -Specify the database connection information as needed for the database:
  GG username, password
  -Specify the error handling rules:
  REPERROR (BY DEFAULT, ABEND)
  
  DDL EXCLUDE ALL THE
  
  Billing.b1, billing.r1 of the TARGET CARD,
  () COLMAP
  B_ID = id,
  b_f_name = what);
  
  Now, when I try and start replicat rxtest I get this error in the report.
  
  Resolved CARD (entry of BILLING. (B1):
  THE CARD BILLING. B1, TARGET billing.r1, COLMAP (B_ID = id b_f_name = what);
  ... (B_ID = id b_f_name = what...)
  ^
  Error in the COLMAP clause. Column name not found.
  
  Any ideas? Thank you

  And the ranking of the column names in your clause of colmap? If that is not reversed?

• Data source name not found and no driver by default specified

  Hi all
  
  I use Microsoft Accessas as backn. When I start my presentation Services I get this error > data source name not found and no driver specified default.

  Hello

  You must create a data source name (DSN) and update the connection with the DSN name pool.

  Steps to create a DSN:

  Control Panel Goto-> tools-> Data Sources (ODBC) administration.

  Open Data Sources (ODBC) and click on the system DSN tab-> click on the Add button and select Microsoft Access Driver (*.mdb) driver and update the name of the database, the connection tabs and database with the corresponding to your name of the comic.

  Thank you
  Navin Kumar Bolla

• INFA error: name not found and no data source driver by default specified

  All,
  
  INFA version 8.1, DAC 795. Plain vannila with SQL server installation. Client and the server is installed on the same machine.
  
  Connectivity DAC with infa and oltp works very well. Using ETL, Informatica session logs give following error:
  
  ERROR 10-02-2008 15:49:01 node01_PPMBIDEV1 CMN_1022 of MAPPING of database driver error...
  [CMN_1022
  [Microsoft] [ODBC driver manager] Data source name not found and no driver by default specified
  Database driver error...
  Function name: connect
  Database driver error...
  Function name: connect
  [Database error: unable to connect to the database using the user [MDVYAS] and [PPMCRMDEV1@OracleBI_Warehouse] connection string.]
  
  Pointers appreciated

  Hello

  Did you follow-up step 4.13.2 - ' relational Configuration Connections in Informatica PowerCenter Workflow Manager "installation and configuration guide?

  Maury.

• Queue with computerized name not found

  Hello

  I have create a queue to use for communication with a motor at a distance as follows:

  In an expression:

  Locals.Queuename = "MyQueue".

  StationGlobals.RemoteQueueName = '-' + Locals.Computername + '-' + Locals.Queuename

  where I have the environment variable %% Locals.Computername.

  Then I do a step queue with the option to create and StationGlobals.RemoteQueueName as the parameter name.

  When subsequently I do one-step queue with the "GetStatus" option on a variable

  Locals.Queuename = "\\\Computername\\MyQueue".

  This works. When I do it on StationGlobals.RemoteQueueName, the entire operation hangs. I usually actually restart SeqEdit.

  I run TestStand 4.1.0 on Windows XP.

  Any ideas what can cause this behavior?

  Best regards

  Peter

  Thank you for providing us with a sequence to reproduce this problem. I was able to reproduce it by running your sequence. What you are picked up and supposed to work. I have created a problem in our database of follow-up to look further into this, and it will probably be fixed in a future version of TestStand.

  The problem may occur when you make a Dequeue on several lines at a time where two or more queues are on the same machine where at least one is specified with a simple name, like a local in the process queue, while at least another queue is specified with a machine name or an asterisk leading to be created under the global name of the machine. You can work around the problem in one of the following ways:

  (1) make the queues global everything on the machine instead of using local queues (as long as the consequences of that are otherwise ok for you). For example, you can call your "Queue1", "* Queue1" instead, which will overall make your current computer, but will also keep blocking occurs.

  Or

  (2) put the remote queue on a machine that you do not also to the expectations of the local queue with in the same operation.

  (1) is probably the most practical solution. Let me know if this workaround is not enough for you, or if you need assistance or have further questions related to this.

  Hope this helps,

  -Doug

• Network name not found between 2 XP Pro computers. Just stopped working

  I have a computer network that has worked successfully for several years and stops suddenly. The only thing I can think of that changed is that I have installed the "critical" updates that windows recommended I have install. I don't know that's the problem that I didn't test the network for several days before or after the installation, but it can be an important clue

  my network seems to be still intact, as I can ping and access any computer manually via the IP (\\192.168.1.x), but I can't access or their ping more than name (\\computer_1). All my shared drives and printers to refer to names of computers for their ports. None of the networked computers appear in the network neighborhood with the exception of the computer I'm working on.

  Thinking it was simply a problem of firewall/virus protection, I have disabled all of this on both xp computers, but it made no difference. The kicker is that Mac computers can still access the printer shared by computer name. The problem seems to lie between the two xp computers.

  All the obvious print and file sharing settings have been verified to be correct. I even went as far as to set up the network again, that made no difference.

  Two xp computers revealed FALSE when I checked who was the master browser, so I changed my desktop to TRUE to indicate that as long as the master browser.

  On my network, I have 2 MAC OSx 10.5 and 2 windows xp pro SP3. Mac can still access shared printers, computers XP cannot...

  Here are the results for nbtstat - n and ipconfig/all:

  WINDOWS XP DESKTOP CONNECTED VIA AN ETHERNET CABLE:

  C:\Documents and Settings\Drew > nbtstat - n

  Connection to the local network:

  [Node IpAddress: [192.168.1.7] Scope Id:]

  NetBIOS local name table

  Name Type State

  ---------------------------------------------

  DREW_DESKTOP <00>UNIQUE registered
  <00>MSHOME GROUP registered

  DREW_DESKTOP <20>UNIQUE registered

  <1E>MSHOME GROUP registered

  C:\Documents and Settings\Drew > ipconfig/all

  Windows IP configuration

  Name of the host...: DREW_DESKTOP

  Primary Dns suffix...:

  ... Node type: unknown

  Active... IP routing: No.

  Active... proxy WINS: No.

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :

  ... Description: 3Com EtherLink 10/100 PCI TX NIC (3 c

  905 B - TX)

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  IP address...: 192.168.1.7

  ... Subnet mask: 255.255.255.0.

  ... Default gateway. : 192.168.1.1.

  DHCP server...: 192.168.1.1.

  DNS servers...: 192.168.1.1.

  Lease obtained...: Tuesday, December 28, 2010 10:55:34

  AM

  End of the lease...: Wednesday, December 29, 2010 10:55:3

  4 O'CLOCK IN THE MORNING

  WINDOWS XP LAPTOP CONNECTED VIA THE WAN:

  C:\Documents and Settings\Drew > nbtstat - n

  
  

  Wireless network connection:

  [Node IpAddress: [192.168.1.3] Scope Id:]

  
  

  NetBIOS local name table

  
  

  Name Type State

  ---------------------------------------------

  DREW_MACBOOK <00>UNIQUE registered

  MSHOME <00>GROUP registered

  DREW_MACBOOK <20>UNIQUE registered

  MSHOME <1E>GROUP registered

  MSHOME <1D>UNIQUE registered

  .. __MSBROWSE__. <01>GROUP registered

  
  

  Connection to the local network:

  [Node IpAddress: [0.0.0.0] Scope Id:]

  No name in the cache

  PdaNet broadband connection:

  [Node IpAddress: [0.0.0.0] Scope Id:]

  No name in the cache

  Bluetooth network connection:

  [Node IpAddress: [0.0.0.0] Scope Id:]

  No name in the cache

  C:\Documents and Settings\Drew > ipconfig/all

  
  

  Windows IP configuration

  Name of the host...: DREW_MACBOOK

  Primary Dns suffix...:

  Type of node...: peer-to-peer

  Active... IP routing: No.

  Active... proxy WINS: No.

  Ethernet wireless network connection card:

  The connection-specific DNS suffix. :

  ... Description: Adap of Atheros AR5008 wireless network

  TER

     

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  ... The IP address: 192.168.1.3

  ... Subnet mask: 255.255.255.0.

  ... Default gateway. : 192.168.1.1.

  DHCP server...: 192.168.1.1.

  DNS servers...: 192.168.1.1.

  Lease obtained...: Tuesday, December 28, 2010 08:24:41

  M

  End of the lease...: Wednesday, December 29, 2010 08:24:41

  AM

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected

  ... Description: Marvell Yukon 88E8058 PCI-E Gigabit

  Ethernet controller

          

  Ethernet connection high speed of PdaNet:

  State of the media...: Media disconnected

  ... Description: Adapter to wide band PdaNet

    

  Bluetooth network connection Ethernet card:

  State of the media...: Media disconnected

  ... Description: Bluetooth (Personal Area Netw device

  ORK)

          

  Thanks in advance for your help.

  Hello

  If the AV Firewall is 3rd party costume Disable them can still block LAN traffic.

  Try the following on each computer.

  
  WinSock and TCP/IP update.

  Type Cmd in the search text box.

  Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type netsh winsock reset at the command prompt and press the Enter key.

  The same processes to refresh the TCP/IP replaces the command typed with.

  netsh int reset Press enter

  ipconfig/flushdns press Enter

  Restart your computer.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Name of the terminal not found

  Hi everyone, this is something simple I want help with. I want to use the block 'sign', which returns the sign of the number that feed you in. I use my labview with a target DSP (speedy-33). I entered a negative value for the block of sign in the hope to get a - 1 to the output, but to my amazement, it returns the error "Internal - terminal name not found" I tried restarting the computer, in the hope that could help. did not work. did the same on two different computers. What does this error. any suggestions please? ... Mano...

  Hi Mano,

  Wow, I apologize for what seems to be a blatant mistake!  I have notified our R & D Department of this issue, and I will keep you updated.  In the meantime, please use the attached VI to work around the problem.

• "Run program in comments" VCO Workflow survey error "File &lt; file name &gt; is not found" not specified in VCO connected to VCD 5.1

  I'm trying to run a vbs script on a windows computer using "Run the program in comments" VCO Flow. I use the path of the entry only program and placed the script under the c drive to facilitate testing and you try to run a script of vmware for testing as follows. I get a VCO Flow error file < file name > not specified was not found. What is the problem with the entries.

  Flowname: Library/vCenter/comments-operations/process/run program in the comments

  Inputs                        :

  programPath c:\cscript.exe vm - support.vbs

  arguments

  workingDirectory

  undefined environment

  InteractiveSession No.

  Output: file < unspecified file name > not found.

  Thank you

  MuruRam

  Hello!

  In your example, the command would be only c:\cscript.exe and support.vbs - vm is an argument to this command.

  See you soon,.

  Joerg

• Attribute not found error

  I got entity and eovo works very well. My object worked just as well. These days, I add a field database and synchronized my entity object and view. Now, when I add the newly added to my page jspx attribute, then when I run the application, on the console I got the error,
  
  defination of attribute of type view < attribute name > not found.
  
  I use JDeveloper 10.1.2.3
  
  Thanks in advance.

  Hello

  How did you add the attribute to the page (using slide it / move or manually typed)?
  Do you have the link for the newly added in the file pagedef attribute?
  If you use the attribute as a column of a table, check the binding from the table and ensure that the newly added attribute is moved to section display attributes?

  Jean Lou

• Skype error: "Skype.exe point of entry not found the procedure entry point ntalpcsendwaitreceiveport...". »

  Sorry for the ridiculously long title, but that is exactly the error I get.  When I contacted my friends @ Skype that they just told me it's associated windows problem.  I thought, but the error message appear says SKYPE not Windows. Anyway, there is a certain irony in all of this that Skype is a Microsoft company. I'm absolutely furious since Skype perhaps in conjunction with Windows has developed a kind of points of failure...

  Original title: skype.exe point of entry not found the procedure entry point ntalpcsendwaitreceiveport could not be found in the dynamic link library.

  Please note that the thread referenced in 'Question (1)' has been marked as the answer by a moderator, and not by the person who asked the question.  It is highly unlikely that will help in the Safe Mode, starting in a start-up in minimal mode or sfc/scannow configuration. Of course, you're welcome to try these things.

  Uninstall and reinstall of Skype as suggested in "Question 2" would have been my first guess, but a bit of searching online suggests that it also assisted.  Again, try if you wish.  When you uninstall Skype, you will not lose your contacts.

  Research online, I've mentioned suggests that the problem is caused by software Kies from Samsung.  You have this installed on your system?  If so (or even if not), go to C:\Windows\system32 and rename avrt.dll.  You can call it avrt.dlX or something else you like.  Reset.  Let us know if that fixes the problem.  If it didn't, or he did something another break, you can always change the original name (this is why rename is safer than deletion).

  Reference: http://forum.renoise.com/index.php?/topic/31412-solved-ntdlldll-ntalpcsendwaitreceiveport-error-on-startup/

• "Name of file or assembly ' System.Windows.Forms, Version = 2.0.0.0, Culture = neutral, PublicKeyToken = B77A5C561934E089", or one of its dependencies was not found

  Hello

  Im having a problem. I write a program in Visual studio 2008 c# for Windows CE language in a machine of liliput.

  When I run the program in windows 7, I have no problem, but when I try to run my program in Windows CE I get the following exception (the projecto for Windows CE was created to run in this operating system):

  MissingMethodException is unmanaged

  "Name of file or assembly ' System.Windows.Forms, Version = 2.0.0.0, Culture = neutral, PublicKeyToken = B77A5C561934E089", or one of its dependencies was not found.

  The references from my program are:

  mscorlib.dll (Version 2.0.0.0) (length versio 2.0.0.0) - this dll do not exist in the program for Windows 7, appeared when I created the project for windows CE

  NationalInstruments.Vision.dll (Version 11.0.35.102)

  NationInstruments.Vision.Common.dll (Version 11.0.35.102)

  System.dll (Version 2.0.0.0)

  System.Data.dll (Version 2.0.0.0)

  System.Deployment.dll (Version 2.0.0.0)

  (Version 2.0.0.0)-System.Drawing.dll

  System.Windows.Forms.dll (Version 2.0.0.0)

  System.XML.dll (Verision 2.0.0.0)

  Throughout this reference is the Version of the Runtime: v2.0.50727 (it is the versions of Windows CE of liliput machine can run?)

  Can someone help me? I don't know why I get this exception

  Thank you for your help

  Hello UH and thank you for your message.

  I'm sorry I don't really understand what you are doing, you develop applications with Visual Studio 2008 and then deploy it on Windows CE or use directly in windows THIS? (I ask that, because Visual Studio is not supported on Windows CE: http://www.microsoft.com/en-us/download/details.aspx?id=7940)

  In addition, what device OR do you use? What is the fat of your project?

  Thanks for the responses,