Skype sends more of his keyboard DTMF tones
Yesterday, I noticed that I could access is no longer my daily teleconference as the remote system did not accept the access code I'm punching in Skype keyboard.
Today, I tried to access a menu system (coincidentally, for the MS customer service). I reinstalled the latest version, but it still does not work.
The problem occurred from the Click to Call plugin, breaking the last revision of browser Chrome uninstall.
Is there a known here fault or finally has something broken on my machine?
(Windows 8, office)
Thanks for this - by acting on this information, I decided to try to call my own phone and hear the tones, since I'm sure that no dial tone was sent, and not a question of quality (that I don't have from time to time).
In doing so, I found my camera is not plugged in, so no micro. This must have disabled all sounds, including Skype by sending sound signals.
Connected to the camera and I'm back in business.
Tags: Skype
Similar Questions
-
[CME 9.1] Phone IP 3905 fails to send DTMF tones to the external network.
Hi all!
We have three types of SIP phones in our CME 9.1: 3905, 6941 and 8941. All phones except 3905 send DTMF tones successfully through our operator. Here is "debug voice ccapi detail" what "206" (ip phone 3905) extension 93274343 external phone calls and trying to send numbers. Config is to be attached. Also, a part of config here:
voip phone service
list of approved IP addresses
IPv4 10.0.0.0
h323 connections allow h323
allow connections h323 to SIP
allow connections sip h323
allow sip to sip connections
service additional h450.12
no additional service moved temporarily sip
no service additional sip refer
Fax protocol t38 ls-redundancy version 0 0 hs-redundancy 0 help none
H323
SIP
Registration Server expires 120 min 60 max
!
voice class codec 1
g711ulaw codec preference 1
g711alaw preferably 2 codec
!
!
Global voice registry
FMC of fashion
source-address 10.10.0.41 port 5060
3 timeouts interdigit
Max - dn 100
Max-pool 80
load 8961 sip8961.9 - 2 - 2 SR 1-9
authenticate the registry
authenticate the defagroup.com Kingdom
time format 24
date format D/M/Y
Flash TFTP-path:
create the profile synchronization 0001013651736503
Hi all!
We have three types of SIP phones in our CME 9.1: 3905, 6941 and 8941. All phones except 3905 send DTMF tones successfully through our operator. Here is "debug voice ccapi detail" what '206' extension 93274343 external phone calls and trying to send numbers. Config is to be attached. Also, a part of config here:
voip phone service
list of approved IP addresses
IPv4 10.0.0.0
h323 connections allow h323
allow connections h323 to SIP
allow connections sip h323
allow sip to sip connections
service additional h450.12
no additional service moved temporarily sip
no service additional sip refer
Fax protocol t38 ls-redundancy version 0 0 hs-redundancy 0 help none
H323
SIP
Registration Server expires 120 min 60 max
!
voice class codec 1
g711ulaw codec preference 1
g711alaw preferably 2 codec
!
!
Global voice registry
FMC of fashion
source-address 10.10.0.41 port 5060
3 timeouts interdigit
Max - dn 100
Max-pool 80
load 8961 sip8961.9 - 2 - 2 SR 1-9
authenticate the registry
authenticate the defagroup.com Kingdom
time format 24
date format D/M/Y
Flash TFTP-path:
create the profile synchronization 0001013651736503
Register of voice dn 6
number 204
call-forward noan 201 timeout 20 b2bua
Register of voice model 1
function key 1 Redial
function key 2 Cfwdall
function key 3 Hold
function key 5 Trnsfer
function key 6 DND
!
voice dialing plan registry 1
type of 7940-7960-others
model 1...
2 9810 model *.
model 3 9...
Model 4 98...
Register of voice pool 8
Mac ID 64D8.14A5.01B4
type of 3905
Number 1 dn 8
numbering plan 1
DTMF-relay rtp - nte
codec voice-class 1
206 206 username password
No vad
voice POTS dial-peer 1
translation-profile out in the city
destination-model 9 t
port 0/0/0:15
Retail ccapi voice 'debug' is here:
phone #.
* Dec 27 16:45:22.095: / / 0, xxxxxxxxxxxx, CCAPI, cc_get_call_entry:
Entry call is not found
* Dec 27 16:45:22.095: / / 0, xxxxxxxxxxxx, CCAPI, cc_get_call_entry:
Entry call is not found
* Dec 27 16:45:22.095: / / 817/xxxxxxxxxxxx/CCAPI/cc_get_call_entry:
Entry call is not found
* Dec 27 16:45:22.095: / / 817/xxxxxxxxxxxx/CCAPI/cc_get_call_entry:
Entry call is not found
* Dec 27 16:45:22.095: / / 817/xxxxxxxxxxxx/CCAPI/cc_get_call_entry:
Entry call is not found
* Dec 27 16:45:22.095: //-1/xxxxxxxxxxxx/CCAPI/cc_api_update_interface_cac_resource:
Hwidb = GigabitEthernet0/0, bandwidth = 80, Call Id = 817
* Dec 27 16:45:22.095: //-1/xxxxxxxxxxxx/CCAPI/cc_api_update_interface_cac_resource:
Call total count = 0, call Voip Count = 0, Count MMoip call = 0 x 0, bandwidth = 80
* Dec 27 16:45:22.095: / / 817/xxxxxxxxxxxx/CCAPI/cc_get_call_entry:
Entry call is not found
* Dec 27 16:45:22.095: / / 817/xxxxxxxxxxxx/CCAPI/cc_get_call_entry:
Entry call is not found
* Dec 27 16:45:22.095: //-1/A3B9036582FD/CCAPI/cc_api_call_setup_ind_common:
Interface type = 0, Protocol = 3
* Dec 27 16:45:22.095: //-1/A3B9036582FD/CCAPI/ccCheckClipClir:
Part number is provided by the user
* Dec 27 16:45:22.095: //-1/A3B9036582FD/CCAPI/cc_api_call_setup_ind_common:
After checking the number translation:
Number = 206 (TON = unknown, NPI = unknown, not projected = screening, presentation = authorized),
Called number = 3 (TONNE = unknown, NPI = unknown)
* Dec 27 16:45:22.095: / / 817/xxxxxxxxxxxx/CCAPI/cc_insert_call_entry:
Total Call Count = 0, entry calls (call count On = FAKE incoming call = TRUE)
* Dec 27 16:45:22.095: / / 817/xxxxxxxxxxxx/CCAPI/cc_insert_call_entry:
Total Call Count = 1
* Dec 27 16:45:22.095: / / 817, A3B9036582FD, CCAPI, cc_insert_guid_pod_entry:
Incoming = TRUE, Call Id = 817
* Dec 27 16:45:22.095: / / 817, A3B9036582FD, CCAPI, cc_incr_if_call_volume:
10.10.0.126 = remote IP address, Hwidb = GigabitEthernet0/0
phone #.
* Dec 27 16:45:22.095: / / 817, A3B9036582FD, CCAPI, cc_incr_if_call_volume:
Call count total = 1 call Voip Count = 1, Call MMoip Count = 0
* Dec 27 16:45:22.099: //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_registration_lookup:
Corresponding settings; Called number = 3, call transfer Consult Id =
* Dec 27 16:45:22.099: //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_registration_lookup:
No matching node
* Dec 27 16:45:22.099: / / 817, A3B9036582FD, CCAPI, cc_api_set_transfer_info:
Call transfer Reset
* Dec 27 16:45:22.443: / / 817, A3B9036582FD, CCAPI, ccCallDisconnect:
Start calling accounting;
Call Entry (Incoming = TRUE)
* Dec 27 16:45:22.443: / / 817, A3B9036582FD, CCAPI, ccCallDisconnect:
Value = 28, entry calls (disconnect the Cause = 0)
* Dec 27 16:45:22.443: / / 817, A3B9036582FD, CCAPI, cc_api_update_interface_cac_resource:
Hwidb = GigabitEthernet0/0, bandwidth =-80, Call Id = 817
* Dec 27 16:45:22.443: / / 817, A3B9036582FD, CCAPI, cc_api_update_interface_cac_resource:
Call count total = 1 call Voip Count = 1, Call MMoip Count = 0x0, bandwidth = 0
* Dec 27 16:45:22.559: / / 817, A3B9036582FD, CCAPI, cc_decr_if_call_volume:
10.10.0.126 = remote IP address, Hwidb = GigabitEthernet0/0
* Dec 27 16:45:22.559: / / 817, A3B9036582FD, CCAPI, cc_decr_if_call_volume:
Call total count = 0, call Voip Count = 0, Call MMoip Count = 0
* Dec 27 16:45:22.559: / / 817, A3B9036582FD, CCAPI, cc_delete_guid_pod_entry:
Incoming = TRUE
* Dec 27 16:45:22.559: / / 817, A3B9036582FD, CCAPI, cc_delete_call_entry:
Total Call Count = 1, entry calls (call count On = FAKE incoming call = TRUE)
* Dec 27 16:45:22.559: / / 817, A3B9036582FD, CCAPI, cc_delete_call_entry:
Total Call Count = 0
* Dec 27 16:45:22.559: / / 817, A3B9036582FD, CCAPI, cc_delete_call_entry:
Removal of profileTable [0x336F00D4]
* Dec 27 16:45:22.559: / / 817, A3B9036582FD, CCAPI, ccCallGetVoipFlag:
Mask of data bits = 0 x 2, Call Id = 817
* Dec 27 16:45:22.559: / / 817, A3B9036582FD, CCAPI, ccCallGetVoipFlag:
Flag = FALSE
* Dec 27 16:45:22.559: / / 817, A3B9036582FD, CCAPI, ccCallSetVoipFlag:
telephony #Flag = FALSE, data bits mask = 0 x 2, call Id = 817
* Dec 27 16:45:22.559: / / 817, A3B9036582FD, CCAPI, ccCallSetVoipFlag:
Call the entry (Voip AAA Flags = 0x0)
* Dec 27 16:45:22.559: / / 0, xxxxxxxxxxxx, CCAPI, cc_get_call_entry:
Entry call is not found
phone #.
* Dec 27 16:45:28.995: / / 0, xxxxxxxxxxxx, CCAPI, cc_get_call_entry:
Entry call is not found
* Dec 27 16:45:28.995: / / 0, xxxxxxxxxxxx, CCAPI, cc_get_call_entry:
Entry call is not found
* Dec 27 16:45:28.995: / / 818/xxxxxxxxxxxx/CCAPI/cc_get_call_entry:
Entry call is not found
* Dec 27 16:45:28.995: / / 818/xxxxxxxxxxxx/CCAPI/cc_get_call_entry:
Entry call is not found
* Dec 27 16:45:28.995: / / 818/xxxxxxxxxxxx/CCAPI/cc_get_call_entry:
Entry call is not found
* Dec 27 16:45:28.995: //-1/xxxxxxxxxxxx/CCAPI/cc_api_update_interface_cac_resource:
Hwidb = GigabitEthernet0/0, bandwidth = 80, Call Id = 818
* Dec 27 16:45:28.995: //-1/xxxxxxxxxxxx/CCAPI/cc_api_update_interface_cac_resource:
Call total count = 0, call Voip Count = 0, Count MMoip call = 0 x 0, bandwidth = 80
* Dec 27 16:45:28.995: / / 818/xxxxxxxxxxxx/CCAPI/cc_get_call_entry:
Entry call is not found
* Dec 27 16:45:28.995: / / 818/xxxxxxxxxxxx/CCAPI/cc_get_call_entry:
Entry call is not found
* Dec 27 16:45:28.995: //-1/A7D5DC978303/CCAPI/cc_api_call_setup_ind_common:
Interface type = 0, Protocol = 3
* Dec 27 16:45:28.995: //-1/A7D5DC978303/CCAPI/ccCheckClipClir:
Part number is provided by the user
* Dec 27 16:45:28.995: //-1/A7D5DC978303/CCAPI/cc_api_call_setup_ind_common:
After checking the number translation:
Number = 206 (TON = unknown, NPI = unknown, not projected = screening, presentation = authorized),
Called number = 9 (TON = unknown, NPI = unknown)
* Dec 27 16:45:28.995: / / 818/xxxxxxxxxxxx/CCAPI/cc_insert_call_entry:
Total Call Count = 0, entry calls (call count On = FAKE incoming call = TRUE)
* Dec 27 16:45:28.995: / / 818/xxxxxxxxxxxx/CCAPI/cc_insert_call_entry:
Total Call Count = 1
* Dec 27 16:45:28.995: / / 818/A7D5DC978303/CCAPI/cc_insert_guid_pod_entry:
Incoming = TRUE, Call Id = 818
* Dec 27 16:45:28.999: / / 818/A7D5DC978303/CCAPI/cc_incr_if_call_volume:
10.10.0.126 = remote IP address, Hwidb = GigabitEthernet0/0
phone #.
* Dec 27 16:45:28.999: / / 818/A7D5DC978303/CCAPI/cc_incr_if_call_volume:
Call count total = 1 call Voip Count = 1, Call MMoip Count = 0
* Dec 27 16:45:28.999: //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_registration_lookup:
Corresponding settings; Called number = 9, call transfer Consult Id =
* Dec 27 16:45:28.999: //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_registration_lookup:
No matching node
* Dec 27 16:45:28.999: / / 818/A7D5DC978303/CCAPI/cc_api_set_transfer_info:
Call transfer Reset
phone #.
* Dec 27 16:45:34.827: //-1/xxxxxxxxxxxx/CCAPI/cc_validate_mlpp_info:
VALIDATION MLPP INFO:-ServiceDomain: [no (0)] DomainIdentifier: [000000] PrecedenceLevel: [-1 (PRECEDENCE_LEVEL_NONE)] NormalizedPrecedence: [0 (INTERNAL_PRECEDENCE_0)]
* Dec 27 16:45:34.827: //-1/xxxxxxxxxxxx/CCAPI/cc_is_precedence_mlpp_info:
Priority no more than Routine
* Dec 27 16:45:34.827: //-1/xxxxxxxxxxxx/CCAPI/cc_copy_mlpp_info:
Before COPYING - CBC MLPP INFO: ServiceDomain: [no (0)] DomainIdentifier: [000000] PrecedenceLevel: [-1 (PRECEDENCE_LEVEL_NONE)] NormalizedPrecedence: [0 (INTERNAL_PRECEDENCE_0)]
* Dec 27 16:45:34.827: //-1/xxxxxxxxxxxx/CCAPI/cc_copy_mlpp_info:
DEST MLPP INFO: ServiceDomain: [no (0)] DomainIdentifier: [000000] PrecedenceLevel: [-1 (PRECEDENCE_LEVEL_NONE)] NormalizedPrecedence: [0 (INTERNAL_PRECEDENCE_0)]
* Dec 27 16:45:34.827: //-1/xxxxxxxxxxxx/CCAPI/cc_copy_mlpp_info:
AFTER COPY - CBC MLPP INFO: ServiceDomain: [no (0)] DomainIdentifier: [000000] PrecedenceLevel: [-1 (PRECEDENCE_LEVEL_NONE)] NormalizedPrecedence: [0 (INTERNAL_PRECEDENCE_0)] DEST MLPP INFO: ServiceDomain: [no (0)] DomainIdentifier: [000000] PrecedenceLevel: [-1 (PRECEDENCE_LEVEL_NONE)] NormalizedPrecedence: [-1 (PRECEDENCE_LEVEL_NONE)]
* Dec 27 16:45:34.827: //-1/xxxxxxxxxxxx/CCAPI/cc_copy_mlpp_info:
Before COPYING - CBC MLPP INFO: ServiceDomain: [no (0)] DomainIdentifier: [000000] PrecedenceLevel: [-1 (PRECEDENCE_LEVEL_NONE)] NormalizedPrecedence: [0 (INTERNAL_PRECEDENCE_0)]
* Dec 27 16:45:34.827: //-1/xxxxxxxxxxxx/CCAPI/cc_copy_mlpp_info:
DEST MLPP INFO: ServiceDomain: [no (0)] DomainIdentifier: [000000] PrecedenceLevel: [-1 (PRECEDENCE_LEVEL_NONE)] NormalizedPrecedence: [-1 (PRECEDENCE_LEVEL_NONE)]
* Dec 27 16:45:34.827: //-1/xxxxxxxxxxxx/CCAPI/cc_copy_mlpp_info:
AFTER COPY - CBC MLPP INFO: ServiceDomain: [no (0)] DomainIdentifier: [000000] PrecedenceLevel: [-1 (PRECEDENCE_LEVEL_NONE)] NormalizedPrecedence: [0 (INTERNAL_PRECEDENCE_0)] DEST MLPP INFO: ServiceDomain: [no (0)] DomainIdentifier: [000000] PrecedenceLevel: [-1 (PRECEDENCE_LEVEL_NONE)] NormalizedPrecedence: [-1 (PRECEDENCE_LEVEL_NONE)]
* Dec 27 16:45:34.827: //-1/xxxxxxxxxxxx/CCAPI/cc_validate_mlpp_info:
VALIDATION MLPP INFO:-ServiceDomain: [no (0)] DomainIdentifier: [000000] PrecedenceLevel: [-1 (PRECEDENCE_LEVEL_NONE)] NormalizedPrecedence: [0 (INTERNAL_PRECEDENCE_0)]
* Dec 27 16:45:34.827: //-1/xxxxxxxxxxxx/CCAPI/cc_is_precedence_mlpp_info:
Priority no more than Routine
* Dec 27 16:45:34.827: //-1/xxxxxxxxxxxx/CCAPI/cc_validate_mlpp_info:
VALIDATION MLPP INFO:-ServiceDomain: [no (0)] DomainIdentifier: [000000] PrecedenceLevel: [-1 (PRECEDENCE_LEVEL_NONE)] NormalizedPrecedence: [-1 (PRECEDENCE_LEVEL_NONE)]
* Dec 27 16:45:34.827: //-1/xxxxxxxxxxxx/CCAPI/cc_is_precedence_mlpp_info:
Priority no more than Routine
* Dec 27 16:45:34.827: / / 818/A7D5DC978303/CCAPI/ccCheckClipClir:
Part number is provided by the user
* Dec 27 16:45:34.827: / / 819/xxxxxxxxxxxx/CCAPI/cc_insert_call_entry:
Total Call Count = 1, entry calls (call count On = FAKE incoming call = FALSE)
* Dec 27 16:45:34.827: / / 818/A7D5DC978303/CCAPI/cc_peer_bind:
Link = TRUE, Id = 818, bound Call Id = 819 Call Binder
* Dec 27 16:45:34.827: / / 819, A7D5DC978303, CCAPI, cc_insert_guid_pod_entry:
Incoming = FALSE, Call Id = 819
phone #.
* Dec 27 16:45:34.827: / / 819, A7D5DC978303, CCAPI, cc_set_voice_port_value:
CC_IF_TELEPHONY: Echo = 0, = 0 Playout
* Dec 27 16:45:34.831: / / 0, xxxxxxxxxxxx, CCAPI, cc_get_call_entry:
Entry call is not found
* Dec 27 16:45:34.831: / / 818/A7D5DC978303/CCAPI/ccCallGetContext:
Context = 0x33C6F520, Id = 818 Call
* Dec 27 16:45:34.831: //-1/xxxxxxxxxxxx/CCAPI/cc_set_outpulsed_digits:
set 3274343 = outpulsed_dialstring
* Dec 27 16:45:35.399: / / 0, xxxxxxxxxxxx, CCAPI, cc_get_call_entry:
Entry call is not found
* Dec 27 16:45:35.399: / / 0, xxxxxxxxxxxx, CCAPI, cc_get_call_entry:
Entry call is not found
* Dec 27 16:45:35.403: / / 818/A7D5DC978303/CCAPI/cc_peer_bind:
phone #Bind = TRUE, Binder Call Id = 818, bound Call Id = 819
* Dec 27 16:45:35.559: / / 818/A7D5DC978303/CCAPI/cc_peer_bind:
Link = TRUE, Id = 818, bound Call Id = 819 Call Binder
phone #.
* 16:45:45.199 Dec 27: % LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:14, status changed to
phone #.
* Dec 27 16:46:02.215: / / 818/A7D5DC978303/CCAPI/ccCallDisconnect:
Start calling accounting;
Call Entry (Incoming = TRUE)
* Dec 27 16:46:02.215: / / 818/A7D5DC978303/CCAPI/ccCallDisconnect:
Value = 16, entry calls (disconnect the Cause = 16)
* Dec 27 16:46:02.215: / / 818/A7D5DC978303/CCAPI/ccCallDisconnect:
Call the entry (disconnect the Cause = 16)
* Dec 27 16:46:02.215: / / 819, A7D5DC978303, CCAPI, ccCallDisconnect:
Start calling accounting;
Call Entry (Incoming = FALSE)
* Dec 27 16:46:02.215: / / 819, A7D5DC978303, CCAPI, ccCallDisconnect:
Value = 16, entry calls (disconnect the Cause = 0)
* Dec 27 16:46:02.215: / / 818/A7D5DC978303/CCAPI/cc_api_update_interface_cac_resource:
Hwidb = GigabitEthernet0/0, bandwidth =-80, Call Id = 818
* Dec 27 16:46:02.215: / / 818/A7D5DC978303/CCAPI/cc_api_update_interface_cac_resource:
Call count total = 1 call Voip Count = 1, Call MMoip Count = 0x0, bandwidth = 0
* Dec 27 16:46:02.227: //-1/A7D5DC978303/CCAPI/g113_calculate_impairment:
(delay = 79 (ms), loss = 0%), Qi = 0 participants Io = 0 = 0 = 2 Ie = - 1 Itot = 1 DLI
* Dec 27 16:46:02.227: / / 818/A7D5DC978303/CCAPI/cc_decr_if_call_volume:
10.10.0.126 = remote IP address, Hwidb = GigabitEthernet0/0
* Dec 27 16:46:02.227: / / 818/A7D5DC978303/CCAPI/cc_decr_if_call_volume:
Call total count = 0, call Voip Count = 0, Call MMoip Count = 0
* Dec 27 16:46:02.227: / / 818/A7D5DC978303/CCAPI/cc_delete_guid_pod_entry:
Incoming = TRUE
* Dec 27 16:46:02.227: / / 818/A7D5DC978303/CCAPI/cc_delete_call_entry:
Total Call Count = 1, entry calls (call count On = FAKE incoming call = TRUE)
* Dec 27 16:46:02.227: / / 818/A7D5DC978303/CCAPI/cc_delete_call_entry:
Total Call Count = 0
* Dec 27 16:46:02.227: / / 818/A7D5DC978303/CCAPI/cc_delete_call_entry:
Removal of profileTable [0x336EFA6C]
* Dec 27 16:46:02.227: / / 818/A7D5DC978303/CCAPI/ccCallGetVoipFlag:
Mask of data bits = 0 x 2, Call Id = 818
* Dec 27 16:46:02.227: / / 818/A7D5DC978303/CCAPI/ccCallGetVoipFlag:
Flag = FALSE
* Dec 27 16:46:02.227: / / 818/A7D5DC978303/CCAPI/ccCallSetVoipFlag:
telephony #Flag = FALSE, data bits mask = 0 x 2, call Id = 818
* Dec 27 16:46:02.227: / / 818/A7D5DC978303/CCAPI/ccCallSetVoipFlag:
Call the entry (Voip AAA Flags = 0x0)
* Dec 27 16:46:02.227: / / 0, xxxxxxxxxxxx, CCAPI, cc_get_call_entry:
Entry call is not found
* Dec 27 16:46:02.275: / / 819, A7D5DC978303, CCAPI, cc_delete_guid_pod_entry:
Incoming = FALSE
* Dec 27 16:46:02.275: / / 819, A7D5DC978303, CCAPI, cc_delete_call_entry:
Total Call Count = 0, entry calls (call count On = FAKE incoming call = FALSE)
* Dec 27 16:46:02.275: / / 819, A7D5DC978303, CCAPI, cc_delete_call_entry:
Removal of profileTable [0x336E75C4]
* Dec 27 16:46:02.275: / / 819, A7D5DC978303, CCAPI, ccCallGetVoipFlag:
Mask of data bits = 0 x 2, Call Id = 819
* Dec 27 16:46:02.275: / / 819, A7D5DC978303, CCAPI, ccCallGetVoipFlag:
Flag = FALSE
* Dec 27 16:46:02.275: / / 819, A7D5DC978303, CCAPI, ccCallSetVoipFlag:
Flag = FALSE, data bits mask = 0 x 2, Call Id = 819
* Dec 27 16:46:02.275: / / 819, A7D5DC978303, CCAPI, ccCallSetVoipFlag:
Call the entry (Voip AAA Flags = 0x0)
* Dec 27 16:46:02.275: / / 0, xxxxxxxxxxxx, CCAPI, cc_get_call_entry:
Entry call is not found
phone #unde all
The CME version is 9.1
Version of the IOS is 15.3 (1) T (also tested in 15.2 - the same issue)
All ip phones have the last firware (9-2-2-0), also I have already spent some of them (9-2-1-0) - the problem persists.
Hello
I think the best is to capture a trace of sniffer on the phone directly, we will be able to see if the phone itself sends the numbers.
You can also enable some debugs:
Deb voice ccapi inout
messages ccsip deb
Media ccsip deb
That should be enough to isolate the problem
--
Jorge ArmijoDo not forget to rate helpful responses and identify useful or correct answers.
-
Me and my dad is from the same Apple ID and I want to set up his own, but how it will get all his contacts, photos etc from my Apple ID? Or he will lose all? or I could keep them saved for him and send more via an application any? I don't know how to resolve this issue, if someone could point me in the right direction.
Have him create a id Apple here- create and start using a Apple - Apple Support ID, and then both you can create an album-photo sharing Photo Sharing - Apple Support iCloud
-
When the video parameters SX, MX and CSeries will be a keyboard of DTMF tones on call control page?
Currently, the page of call control on the web interface of the Cisco video endpoints doesn't have a way to enter DTMF tones remotely. It doesn't seem to be a keyboard of DTMF tones available to enter these tones remotely. Does anyone know if Cisco will be adding this soon?
You can enter DTMF tones using the web interface under Setup > API.
xCommand DTMFSend CallId: DTMFString:
- CallId: The CallID returned by operating the xCommand command Dial. During the call, you can run the xStatus calling command to see the CallId.
- DTMFString: Enter the DTMF string.
Example: xCommand DTMFSend CallId:2 DTMFString:1234
Best place to find updates to come or possible would be to contact your Cisco account manager, if nothing is being developed or looked at the current time, they can create a demand for improvement for you. However, the C series and the earlier boundaries of MX series points are already end of sale, and TC software they are running is in maintenance mode, in order to get the new features added to these devices special is unlikey. Although there is a chance to get it added to the current range of endpoints SX and MX Series, just need to contact your Cisco AM and see what they can do to make your request.
-
I have no more of his and my lack of icon. I also lost my D: Drive.
Suddenly I no more of his and my icon missing and unable to be re again had to find good diver unable. I also have the loss my D: drive and once again can not find don't not on my PC. Help please give ideas as soon as possible or / and vise. Albums hop thanks
I pleased some answering my question. I have nothing so my normal. No program or application. If you send me step by step to re-again, I would be grateful. Fred
-
Had a look on the forums but couldn't find a solution.
I guess there is no way to speed up the rate at which a DTMF tone is sent after the other?
No, if you press the keys during a call, dtmf tones are added to send it queue all the same, no difference in speed.
-
Question
When installing FF7, I clicked Yes to the "do you want to send info back to the developers on the use of memory etc." and now I want to no longer send information as his gel my browser then how do I disable that?See:
- Firefox > Preferences > advanced > general: system default: 'send performance data '.
-
I have 3 short videos I tried emailing stuck in Outbox of my iPhone 6. They tried to send more than an hour. I can't delete them, "Change" is not available in the Outbox. How can I get rid of these so mail will stop trying?
Can drag you across the message in the Outbox overview to get the Red delete button? It's been a while since I had paste an email in the Outbox, so I don't remember if that's possible.
IF your account is an IMAP account, try to delete the e-mail on the Mac. Actions sync between devices in IMAP email, so they should be in the Outbox on the server and you should be able to get to them in the Mail from Mac application, use you it, or in a web browser on the server.
IF this is not possible for some reason, try the mail application to the phone reboots and the closing force force the phone and then try again. Press the Home button twice quickly. You will see small glimpses of your applications recently used. Blow up the Swipe on application brief mail app to close
To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.
-
Woman cannot send emails from his iPhone.
Original title: since my wife updated Microsoft Hotmail security settings using my account as a substitute last month that she cannot send emails from his iphone
My email address is * address email is removed from the privacy * and his is * address email is removed from the privacy * is a timing issue with the iphone, we were on the helpdesk of Telus and Aplle helpline unsuccessfully to Ant and now she received another email to update its security setting again? pls help?
Try asking in the Hotmail/Outlook.Com forum:
http://answers.Microsoft.com/en-us/outlook_com -
How can I send more than one signal to DMA FIFO?
Hello
I am trying to send more than one signal to DMA FIFO, but I don't know how to do. I have no problems when I send a signal. I try to use a DMA FIFO block for a single signal. For example if I have 3 signal I use · FIFO of DMA but when I want to wath them a table waveform signals have a delay.
How can I do to send more than one signal to DMA FIFO? and if this is not possible, how do I do to syncronizate 3 signals?
The data type of the signal is FXP<16,10>
Kind regards.
Pablo
-
Are other than 0-9 DTMF tones, #, * supported?
According to the official specifications of DTMF, there are 16 DTMF tones:
0-9, #, *, A, B, C, D
Are all supported by BlackBerry when using PhoneCall.sendDTMFTones ()?
A, B, C, D, are not mentioned in the documentation.
lol the supported are in the API.
-
Is it possible to send more than 100 pages using EchoSign?
Is it possible to send more than 100 pages using EchoSign?
Hello
EchoSign Transaction limits: -.
https://www.echosign.Adobe.com/en/support/knowledgebase/EchoSign_Transaction_Limits.html
You will need to contact support to adjust the page boundary.
Thank you
Jat
-
more than a keyboard shortcut for an object
Is it possible, with a sort of workaround to assign more than one keyboard shortcut to an object? The reason I want to do is because the software is explaining the project uses more than one combination of keys.
Hi again
Well, what you do, it's the option button. The button is then assigned a shortcut and BER a different shortcut. If you don't see the button, configure it as invisible without text and paste it in a corner somewhere.
See you soon... Rick
Useful and practical links
Captivate wish form/Bug report form
-
Bought more than 8600. I send faxes only. My ring tone volume is LOUD. Can I disable or mute? THX
My speakers volume of your ring? is much too strong. I need to be able to adjust it. I sleep during the day and live with the other. I don't want to have to pull the cable from the printer, whenever I want to sleep. Thank you for your time.
I guess that I fixed it. I just turned off all the sounds of the fax. Not so practical but it's better that pull the plug out of the printer whenever I want to sleep.
-
Hello
I'm following the steps in the article available here
but the Builder
new PhoneCall()
There is no
Indeed, the reference to the api class PhoneCall does not contain this constructor.
Where I'm wrong?
Thank you
the documentation is probably correct.
initiate a call is not blocking. This means that the following line of code runs before the appeal is made.
use a http://www.blackberry.com/developers/docs/6.0.0api/net/rim/blackberry/api/phone/PhoneListener.html to detect the connected call.
Maybe you are looking for
-
Why is it updated crashing of ios10 of Notes app?
Notes app crash after I have updated to iOS 10.
-
I found how to control spam, but I can't find how to control SPAM.
I have several clients emails which are sent to SPAM that shouldn't be. How can I change this? Training of the JUNK e-mail filter is easy... I did it but I can't seem to find how to form SPAM.
-
Satego X 200 - 21 d - possibility of 8 GB of ram?
Is it possible to run 8 GB (2 x 4 GB) DDR2 ram on this laptop? Or new bios is necessary? There will be in the future one, which will allow this?
-
Satellite L500-PSLS9A-02C012 F8 function works not
Hey guys basically I reinstalled windows 7 ultimate 32 bit on my laptop and my function key (FN) stopped working so I installed PVAT and flash card support and a few others on the Web site of Toshiba but here s my problem... When I press FN nothing a
-
Generate the analog waveform based on the data file
I want to create an analog voltage output that follows I have a data file (excel, csv, text (which is easy)). The data file creates a waveform with equal time between steps (dT =.0034 sec). After the output through all the data points, I want it re