Slacker error

Similar Questions

• Slacker error: a network error has occurred

  Anyone else having problems with Slacker only? I get the error on all my to rush, but I suppose it could always be just my account...

  
  

• Sync blackBerry with Slacker Smartphones

  I have a BB Curve 8330 and installed and used the mobile application of lazy for a week or two. I discovered the option to cache in station and gave it a try. The problem is after caching the station on my BB, it is not sync when I connect to the computer. I tried to launch the app synclauncher stored on the phone, but it gives an error "failed to connect: server returned 401.» Rerun the Setup program on the device. Well I installed the application twice with the same results. Mass storage mode is on. Has anyone else seen elsewhere? Thanks for all replies.

  I use use Slacker and never had this error. I did some research and came across this post. See if the solution helps you

  http://forums.CrackBerry.com/f134/Slacker-problem-can-t-cache-stations-139886/index2.html

• BlackBerry smartphones can not play Slacker Radio

  I just received my brand new tour, and I can't play a looser Radio. Everything downloaded correctly, the program loads, then when he tries to play a song, he says 'could not go track' then 'an error has occurred. Please try your request again later. I had this same problem with my Pearl, so I think that there is a setting I need to change that is related to my accound. Can anyone help?

  Understand the problem, it is configuration of the parameters of security in this FAQ:

  http://support.Slacker.com/app/answers/detail/A_ID/49/p/9%2C11/page/2/r_id/166

• Adobe Creative Cloud Setup error

  I try to install Creative Cloud Premiere Pro trial version on my laptop ASUS Windows 10 and I get an Installation failure notification and when I opened the information, I get the following steps which I followed and it did not work.  I don't know what I should do to get Adobe to install on my laptop.  I have included a picture of the issues.  Thank you for your help

  Darin Slack

  

  Hello

  Please see: -.

  Errors ' Exit Code: 6, "" Exit Code: 7 "|"» CC, CS6, CS5.5

• Call virtualmachine. ShutdownGuest for "SLACK-14" on ESXi object ' ' failed

  I need to install a vm with 14 Slack, install vmware tools with standard of the functions vmsync, mercurihectopascalometer and other procedures.

  But when I try to do a guest virtual machine soft stop, the following message is displayed:

  Call virtualmachine. ShutdownGuest for "SLACK-14" on ESXi '192.168.0.1' object failed

  The request to reset the virtual machine failed because the script corresponding VMware Tools have not run successfully.

  If you have configured a custom script reset this virtual machine, make sure that it contains no errors.

  Try again the operation will ignore the script to fail. You can also submit a support request to report this problem.

  But if you try again, the closing is done

  Could someone help

  Hi rubensinfo,

  It seems that the poweroff on your VM Slack script does not work correctly. Whenever a VM engine is requested from the user interface, a corresponding script is executed inside the guest OS. These scripts can be found in /etc/vmware-tools /. The transaction for example would use the shutdown script poweroff-vm-default. If this command is unable to run properly, the operation will fail. You should have something similar to the following in the vmware.log of your SLACK-14 virtual machine.

  "[msg.tools.rebootFailed] the request to reset this virtual machine failed because the corresponding VMware Tools script did not run successfully. If you have configured a custom script reset this virtual machine, make sure that it contains no errors. Try again the operation will ignore the script to fail. You can also submit submit a support request to report this problem. »

  A quick check on my configuration reveals that the script cannot run because he complains that "ifup" command is not available. Indeed, the command is not available in my VM. See below:

  root @: / etc/vmware-tools #. / poweroff-vm-default
  Thu Sep 4 22:35:01 IST 2014: execution '. "/ poweroff-vm-default"
  Thu Sep 4 22:35:01 IST 2014: execution '. "/ scripts/vmware/network"

  Sep 04 22:35:01 network: ifup not in the search path.

  I think that your problem will be solved if you can run the script successfully in an autonomous way (from the bash prompt).

• Automatic update of Shockwave Flash 24.0 created conflict with Shockwave Flash 23.0 r0 r0 and creates constant errors for streaming audio.

  When the attempt to load Slacker today 12/13 (day of the update) get the infamous "Shockwave Flash may be busy, or it may have stopped responding. You can stop the plugin now, or you can continue to see if the plugin is complete. "error. So, I check the plugins, and of course, I have 2 versions of Flash, and one is new. I have try to disable one, and it seems to work, but not music. Then, I check to see if there is an update to the browser. Yes. Okay okay, we'll update the whole browser. Missing issue? Nope. Hmm. We will try to set the old version to 'request' and leave the new version still run. Refresh the Slacker, and he just ask and ask and ask, even when I set to "Save". Well, it does not. So let's turn it around - what is it? They are both set to 'ask '. Huh. Ok... Let's see if we can get rid of the old version of 23. I go to C:\Windows\SysWOW64\Macromed\Flash and search for the 23 .dll file, and this is the only file there for her. Rename it to .old, back back, restart FF, reload Slacker, 23 has disappeared, no still no streaming. No popup, no lock, no music either. Looks like Slacker like not the 24 version does not work on it, but the update released most of the 23. As long as the 23 .dll file is in place, there is a conflict that causes a deadlock, so I can not just put 23 and run at the same time.

  • Update * it turns out that this issue has repercussions quite a few sites that I frequent, making it virtually unusable FF for me.

  Suggestions?

  So apparently just rename the .dll for the 23 file and restarting FF was not enough. I had to rename and restart my system completely. As I said in my original post, the update to 24 deleted all other traces of 23, leaving only behind the .dll file. I'm not for unnecessary restarts when I have a stable system, and it is not uncommon for my system to go months without a reboot. That's why I really hate auto-updates to date, but these days some things up-to-date so ridiculously fast that I'm tired of things break because plugins have been disabled because they were obsolete.

  Thanks for the reply and links to the uninstall program. That will probably save me some hair pulling in the future.

• Uninstall software update Apple says error in seller contact package package unstaller

  Try to get itunes working to make a backup of my faulty iphone before repair.

  First-itunes does not start says error. I'm trying to fix it, who said success but same error when you try to start it.

  Then uninstall completely worked. Then reinstall that seemed to be over except for a message "an older version of Apple software update already exists" then he went down and install itunes apparently had not been completed.

  Then I try to remove the update from the apple software and executed by an error in the installation program - it says there is an error in the installation and contact the supplier of the installation package. Same error if I run the uninstall command line program.

  Try to repair the Apple Software Update of programs & features Control Panel and then try to update iTunes again.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• SUMIF error

  I'm new to apple and get a syntax error when you use SUMIF.  In my table, I just need column F to test the value of column E.  If it is greater than 0, then divide by 20.  Thank you!

  In cell F1

  = E1/if(E1>0, 20, 1)

  fill down as needed

• An error in this Applescript that I can't understand

  Hi, I searched some forums and found this script below which I modified. It works great except for a single statement:

  runScript If = 1 then number error -128 I want the script to do is, when a USB drive is mounted and is in the ignoredVolumes as "USB Untitled" I want the script to stop. What I can't understand is, runScript is set to 1, "Untitled USB" Monte, runScript is not changed, why don't the script stops with an error "user cancelled"? On the other hand, if a key USB Monte is not in the ignoredVolumes, runScript is set to 2 and copy the file I want it. What hurts? It's probably something that will be very obvious when I see the answer.

  Thanks for any help with this problem,

  Mike.

  
  

  
  

  property ignoredVolumes: {'10,10 30 1. 5 't', 'files 1. 5 't', "Untitled USB"} - add if necessary

  property videoExtensions: {"avi", "mov", "mpg", "wmv", "mp4" and "mkv"}

  the value newVolume to the alias (POSIX file "/ Volumes/files 1.") ("5T / new")

  the value oldVolume to the alias (POSIX file "/ Volumes/files 1.") ("5T / old")

  game runScript to 1

                 tell application "System events".

  the value rootVolumes to disk (POSIX file ' / Volumes ' in the text)

  the value allVolumes to name of every element of disc of rootVolumes

  the value numofallVolumes to the County of allVolumes

  Repeat with the present book in allVolumes

  say application 'Finder '.

  if (the present book is not in ignoredVolumes and (this book as text) is not '. ') DS_Store') then

  if there are alias (POSIX (' / Volumes / "& the present book) as text file ) then game runScript to 2

  runScript If = 1 then number error -128 - it does not give a 'User cancelled' error when "Untitled USB" is mounted

  runScript If = 2 then

                                                                          try

  duplicate (elements whose name is in the videoExtensions extension) in alias (POSIX file (' / Volumes / "& the present book &" / new ") as text) to newVolume

  on error number errorNumber errorMessage

  _error value of errorMessage

  _errorNum the value to errorNumber

  If errorNumber is -15267 then

  display the dialog box "This file already exists in folder a." buttons {"OK", "No"} default button 1 with the title "Film copy error?" giving upwards after 10

  If the returned button of result is 'No' then

  Error number-128

  on the other

  If the result is 'OK' or back button gave up lead and then of

  eject the present book

  display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5

  return

  end if

  end if

  end if

  end try

  Try

  duplicate (elements whose name is in the videoExtensions extension) in alias (POSIX file (' / Volumes / "& the present book &" / old ") as text) to oldVolume

  on error number errorNumber errorMessage

  _error value of errorMessage

  _errorNum the value to errorNumber

  If errorNumber is -15267 then

  display the dialog box "This file already exists in the folder B" buttons {"OK", "No"} default button 1 with the title "Film copy error?" giving upwards after 10

  If the returned button of result is 'No' then

  Error number-128

  on the other

  If the result is 'OK' or back button gave up lead and then of

  eject the present book

  display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5

  return

  end if

  end if

  end if

  end try

  display the dialog box "USB key will Auto Eject in 10 seconds or click OK... "buttons button 1 with the title"copy Complete - Eject? "default {'OK', 'No'} which gives after 10

  If the returned button of result is 'No' then

  Error number-128

  on the other

  If the button returned of result is "OK" or gave up a result then ejection of the this book

  display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5

  end if

  end if

  end if

  end say

  end Repeat

            end say

  The way in which your external block If is currently based, the script can't do anything when this book is in the ignoredVolumes, it can not yet test the runScript value. Try something like this:

  If the present book is in the ignoredVolumes then

  game runScript to 1

  on the other

  if (the present book as text is not '. ') DS_Store') then

  if there are alias (POSIX (' / Volumes / "& the present book) as text file ) then game runScript to 2

  end if

  end if

  
  

  Of course, you need to remove a "end if' the end of the script.

  
  

  
  

• error message when try to sync the iPhone, "invalid response from the device?

  What can I do when I receive this error message when you try to sync to my iPhone 5 s - "invalid response from the device?

  -What are your 5 updating to 10.0.2 iOS iPhone? If this is the case, you must have the latest version of iTunes on your computer, which is required for Mac OS X 10.9.5 12.5.1, or above. To meet these specifications will be receiving this error.

• Display Rotation error

  Hello

  I had a problem with the rotation of the screen under macOS Sierra function. As the screen rotates, there is an error that pop up and later that I'm unable to get into system-> Display Preferences. It is for me a "mistake preferably: County not load display preferences" message and I was unable to rotate the screen back. I started from the system in safe mode and temporarily solved the problem. But if I want to rotate the screen again, it pops up the same error again. I was using the rotation function pretty well in OS X El Capitan. But since I updated to macOS Sierra, I had this problem.

  I wanted to know if there is a lasting solution to this problem.

  I'm using macOS Sierra on MacBook (13-inch, early 2015) Air with processor 1.6 Ghz Intel Core i5 and 8 GB memory DDR3 at 1600 MHz with 128 GB of storage.

  Hello PavanGJ,

  Thank you for using communities Support from Apple. I see that since upgrading to Mac OS Sierra problems of screen rotation. The preferences window does not. I know how it is important for your Mac to work reliably. I'll be more than happy to help.

  Great job to test mode without failure. In Safe Mode disables most of the third-party services, it could be a compatibility problem with an application that you have. Check out this article:

  OS X El Capitan: If you have problems with startup items

  You can not hold account that the title suggests it's to El Capitan. It applies to macOS Sierra as well.

  You can also test the issue in a new user account.

  How to test a question in another account on your Mac - Apple Support

  Let us know if that helps.

  Take care!

• A fact error 4014 showing each time after all the steps

  One of my friends has an iPhone 5 s and he lowered his 10 9.3.5 iOS iOS iPhone it started and inquired "side update" to the rest of the new software update points, but suddenly her iPhone off and does not turn, does not yet show the Apple Logo. I tried to restore it with the new version of the iOS 10.0.2, I file the software theipsw and then restoring the iPhone, iTunes showed me the message "waiting for iPhone" and ultimately showed me a message by this sentence "iPhone" his name' siphons ' could not be restored.» An unknown error occurred (4014).

  I checked the list of steps that Apple suggests their, but nothing happened then, always showing me the same error number. What should I do?

  Thank you for your help and appreciate it.

  I found the solution. Just type here for others with the same problem to solve their problems.

  While the "iTunes with cable" sign is showing and in your computer, showing you "Waiting for iPhone" and things occur, you should restart your iPhone (hold sleep/wake low and low home together for a few seconds) implemented after this attempt to restore your iPhone again you should recover your iPhone software.

  Thank you for your support and more.

• Playgrounds are learning to code 1 download error

  I recently bought an iPad Mini 2 specifically so that I could use the app to playgrounds to learn about Swift.  Whenever I try to download the playing field 'Learn to Code 1 - basics of the swift' I get an error that says: "not taken download error supported URL.  I uninstalled and reinstalled the soft playgrounds several times.  Other playgrounds (as 'learning to Code 2 - beyond the basics') download very well.  How can I bypass or fix this error and get the first playground of lesson?

  

  Finally, the playing field is downloaded successfully!

• Error Java Run After downloading the new Sierra

  

  Java is up to date and I get this error message. A couple of times, I have "updated" restarted. Still happens.

  Hi cjshrad,

  Thank you for contributing to the communities of Apple Support. I see in your message you receive a Java error after upgrade to Sierra on your Mac. I'd be happy to help with this!

  First of all, try to install the Java for OS X package found here:

  Download Java for OS X 2015-001

  The next step, if you still see this error, I recommend that you completely uninstall Java from your Mac by following the steps listed here:

  How to uninstall Java on my Mac?

  Once you're done, use this link to download and install the latest version of Java for your Mac:
  Download Java for your Mac - Apple Support

  Take care!