Sleep mode monitor makes peripheral computer play disconnect sound

Similar Questions

• My computer plays no sound & says I have no audio device...

  My computer plays no sound & says I have no audio device... Apparently, I need easynote ml65 but don't know where to find it... any help please? My laptop is a Packard bell initially using vista OS but now using XP... any help please?

  Go to the website of PB, PC support page and download and install the latest sound drivers.

  See you soon,.

  Jerry

• Windows Vista's sleep mode after 20 minutes while playing PC games even though my power settings are set to NEVER.

  Windows sleeps only during the performance of PC games (not all PC games, sometimes with Call of Duty 2 but not with FIFA 07).

  According to my settings sleep mode & disable the display are set to never for both blocked in battery mode. Any help would be appreciated

  Thank you

  Hello

  1. what happens when you restart the computer from sleep? It back to windows, such as the release of sleep or does go through the normal boot process?

  2 have you done any recent software or the hardware changes on your computer?

  3. don't you face the problem only by playing games?

  Method 1:

  I suggest you to run a full scan of your computer and check.

  Microsoft Security Essentials

  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials

  Note: If infections are detected during the scan, it is possible that infected files would be deleted.

  Method 2:

  I also suggest you to start your computer in a clean boot state, and check if all third-party software could be the cause. Clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7 http://support.microsoft.com/kb/929135

  Note: Don't forget to return the computer to normal after completing the troubleshooting by following the steps described in step 7.

  Method 3:

  I also suggest that you perform a clean boot material to check if the problem is caused by any device.

  Follow these steps to perform a clean boot material:

  a. disconnect all external devices.

  b. start the computer in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  c. click 'Start', type 'DEVMGMT.» SMC"in the search text box and press ENTER."

  d. expand "graphics cards".

  e. right click on your graphics card, select "Properties"

  f. click the "driver" tab, click on disable (disable the selected device). Click OK

  g. use the same method to disable other devices such as: map of the sound card, Modem, network, CD - R drive. Note Some devices not available must be disabled.

  h. restart the computer.

  After you turn off the devices, start in normal mode and try to activate the devices one by one and check which device is causing the problem.

• Windows 7 blue screen, sleep mode monitor.

  Hello, I have a hp series p6000 desktop product # BT503AA #ABA. And I get a blue screen crash dump and keep saying my monitor goes into sleep mode. Help, please. I swiched monitors and the same results. computer is used for family only, no company. It is running do not install windows 64-bit and some windows updates.

  Really sounds like a software problem, but could be a hard drive problem.

  Boot tapping F10 select your hard drive, then SMART support, run a short self-test. If it goes, try to run a last good known Configuration.

  Start type F8 and select last good Configuration know. This will automatically return the system for when it was working properly.

  Let me know the result to your convience earlier.

• Wake up from sleep mode, monitors turn on but no image is displayed. HP ENVY Phoenix h9

  Product: HP ENVY Phoenix h9 PC Series

  Product #: H3Y51AA #BL

  Model: h9-1387

  OS: 8 64-bit Windows

  Monitors: DELL 2407WFPHC x 2

  Updated graphics drivers to the latest version non-beta.

  Hello

  Since buying my PC a few months ago, it has been one of the ' display' problems after another. This is the current problem:

  When executing step by step away from my computer, I block via Win + L and shortly after that my monitor turns off. When you return a few moments later, I try to wake up to the top (but not really "wake up"...) To try to solve the problems of previous display, I already disabled hibernation options and sleep) my computer by moving my mouse. This causes monitors leave standby mode and be able to raise but what is dispalyed is black screens when I should have been introduced to the login screen.

  Mouse clicks and keyboard do nothing and I'm stuck at black screens. To continue, I press the power button on my PC causing the hard drives to spin-up and shortly after the computer turns off. I press the power button and start the computer to the login screen where as soon as I get my password, Windows loads and all my programs etc appear like they were before I blocked my PC.

  You can see previous problems, I had the list below, if all goes well they will help you to detect the cause of the current problem.

  Help, please.

  Thank you!

  Peter

  Previous problems I had:

  (1) when the awakening from hibernation, the computer would not wake up screensavers leaving no way for you to connect and save your work. Hard reboot needed. Solution: Disable hibernation Windows features.

  (2) error in the sense of "driver has no display and recovered." Possible solution: disabled hardware acceleration in Firefox.

  (3) when waking from sleep, I find that my 2 monitors have merged into one and a different resolution than usual. Once entered password to connect, programs that were on separate monitors are now on the same monitor. Right click on the desktop and selecting 'Screen Resolution'-> 'Detect' would set monitors to return to normal until the problem recurs. Possible solution: updated graphics driver. Don't know if this problem has been corrected, it may have just been concealed by the new problem mentioned above.

  Thanks, but the steps above had no effect.

  However, during a windows update, my graphics card driver has been restored and that seems to have stopped the problem.

  Unfortunately, again I see apps that were on two screens before lock/standby, appearing on the screen even after release sleep/wake. So far he did not often so we'll see.

• Windows Movie Maker 2.6 plays no sound on some videos

  I converted the videos of. MOV to. MPG and so they could be added in movie maker, the video works fine but the sound does not work. I already tried to play videos on windows media player and the sound works fine. I also tried to add another video from a different digital camera (it is also. MI/GAL) and the video worked very well... they are both. MPG, but only the sound files works in Movie Maker.

  just forget about it. for ANYONE having a problem with Windows Movie Maker, just go and download Video Editor Pad. its free and 10 times easier to use.

  Here is the link http://www.nchsoftware.com/videopad/index.html

• Satellite M40-110: WLan is not working properly after sleep mode

  Hello, I have a M40-110. I have some problems with my wireless adapter. After I closed the screen (bed) and the computer goes into sleep mode, I open the computer screen becomes active, but this time the wireless adapter is not working properly and I can't connect to Internet with my wireless adapter. Sometimes, it seems that the wireless adapter has established a connection, but I can't send and receive data from the Internet. Sometimes after this case, the wireless adapter becomes invalid.

  My Service offered to enable the bios wake-up-on-lan option. After doing this, the Internet worked properly.
  But I am wary about this option:

  (1) not allowing this option cause draining my battery quickly?
  (2) this option doesn't make that hides my hardware failure (wireless card) and it is really necessary to solve this problem?

  Thank you
  Sinan.

  Cool, thanks for the info

• Problems with Windows 10 screen standby and sleep mode

  After downloading 10 Windows on my desktop all-in-one HP, I have problems with the display of standby and sleep mode.  When the computer turns off, he doesn't have the bright screen.

  After the upgrade to Windows 10, some laptops have experienced one or more of the following symptoms:

  • > Power LED remains lit after stopping
  • > Computer enters standby or hibernation.

  HP recommends that customers see these symptoms first update the graphics drivers by removing and then reinstalling the hardware in Device Manager.

  See the section updating the graphics driver from where can I find drivers Windows 10 and software for my model?

• How to prevent sleep while music plays driver sound

  I'm using Windows 7 Ultimate 64 bit on an all-in-one Sony Vaio VPCL117.
  Power settings:
  ENABLE disable show 10 min
  SLEEP 30 minutes
  When the computer plays music (using Windows Media Player or iTunes or any other musicplayer) and the screen goes to sleep (after 10 minutes), the sound is also off, although the application of music player always plays.
  "How can I stop the audio driver (Realtek High Definition Audio) in this case of"go to sleep"without changing the ' TURN OFF THE DISPLAY" Never?
  BTW, this occurs if the audio comes from built-in speakers or Audio output.
  So far, my only solution is to disable the power settings and keep the display from being extinguished.
  I tried Sony technical support, but they had no idea that disable power management (shooting at FOREVER).

  alexmo

  My Settings Advanced Energy has the following:
  Multimedia settings
  When sharing media
  Connected: avoid the idling to sleep
  During video playback
  Plugged in: optimize video quality

  Changing these settings has no effect on the sound to go to sleep when the display is put to sleep.
  In my view, that it is a problem with the Sony Vaio L series specific.  I tried the same on a Dell laptop which works very well.

  alexmo

  Hello

  In order to save battery power, as much as possible many laptops a etiquette energy saving system that in rides the BONE.

  Sony support will be a good place to go.

  Jack-MVP Windows Networking. >

• Sound stops working after sleep mode in Windows 7

  I just installed Windows 7, map its Xonar HDAV 1.3 Slim, ASUS M4a78 Pro motherboard with processor image ASUS.  Works fine until it goes into sleep mode.  When he wakes up, the sound does not work.  When I test different devices, the sound bar saves the output, but no sound appears.  Update BIOS and drivers and that didn't help.  All system sounds and sounds MCE or anything like that do not work until I restart.  I saw the patches for this problem in Vista, but it will not yet install in my computer because I have Windows 7.  Thanks for any help!

  Install the latest Windows 7 compatible sound and display drivers.

  New user, see:
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  All the best!

• Monitor goes into sleep mode during the installation of Windows 7

  Hello, I'm doing a new install of Windows 7 pro on a new SSD. He gets regarding to reset for the second time during the installation, and just before showing the page where you name the computer and configure user accounts, the monitor goes to sleep and won't return. only way to recover is to reset the machine, only to do exactly the same thing again. Anyone know what could be the cause? I used the same disk of windows for many expenses format / install Windows after hardware upgrades in the past and this has never happened before. Can provide the complete specifications of the system if necessary. Help, please!

  Hi Danpedro,

  I see that the screen goes into sleep mode, in the last step of installing Windows 7. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. you have an external display driver card attached to the motherboard?

  3. you format the hard disk during Windows 7 installation?

  Method 1.

  Disconnect any external devices and restart the computer to see if it helps complete the installation of Windows 7.

  Method 2.

  If you have a driver to attached external display card, then you can disable this external driver in the BIOS and check if that helps complete the installation of Windows 7.

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• NetBook Asus Eee disconnects me from the internet whenever it goes into sleep mode.

  I just got an Asus Eee netbook with Windows 7 Starter installed.

  Whenever the laptop goes to sleep or sleep, he disconnects the internet and refuses to reconnect.
  The only way I can make it work is off my home router and reset the system.
  It's annoying and embarrassing. Is there a way to get around this?

  Hello

  1. don't you make changes on the computer before the show?
  2. you receive an error message on the computer?
  3 is this a wired or wireless?

  Method 1:
  Perform a clean boot and check.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the adventures of shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.

  Method 2:
  You can try to disable the functionality of management of power in network adapters,

  a. click on start

  b. right click on computer

  c. click on manage the

  d. click on Device Manager in the left pane of the window

  e. expand your network card.

  f. now you will see your network adapter or adapters if you have more than one. Right-click on the network component, and then click Properties.

  g. go to the power management tab.

  h. ensure that all boxes are unchecked.

  i. When you have disabled the boxes, click ok and restart your system. Put the computer in mode 'sleep' and check if you still have any questions.

  Method 3:
  If the steps above don't you can try the steps in the link and check.

  After you wake up, a Windows Vista-based computer or a Windows 7 sleep mode or Hibernate computer, the network icon and the speaker in the notification area icon do not show the correct state

  http://support.Microsoft.com/kb/937477

  Reference link:
  http://Windows.Microsoft.com/en-us/Windows7/why-am-I-being-disconnected-from-my-network

• My computer will always run a scheduled backup, if it goes into sleep mode? Windows 7...

  original title: will BE BACKUP OCCUR IF MY LAPTOP GOES TO SLEEP MODE? (WIndows 7)

  I have my laptop value backup at midnite.  I have the computer goes into "sleep" mode before.  Is my computer still backup as expected?

  You can get the Task Scheduler to wake him up.

  You can configure the backup form program timed task in the Task Scheduler with the game of "wake up to perform this task.  Depending on what you use for backups, the backup application can already use Task Scheduler & all you need to do is add the "wake up to perform this task" setting.

  To open Task Scheduler, type 'Planner' in the search box of the start menu.  Search in the left pane and select its library.  Browse the tasks in the list that has your backup program in its "Action" tab  Make a copy [a test version] 1 by clicking Export in the right pane & recording in an easily accessible folder, 2 when you rename the file in the selected folder [simply add 'Test' at the beginning of its name] 3 click on import in the right pane to bring in the copy renamed the task from the same folder.

  Now you can play safely & just disable the test version when you are finished.  The main change would "allow to wake up...." "and it's in the conditions tab.

  If it works, let the enabled test version & disable the original for a few days while you're fairly confident that the new version works.  Then you can delete one of them - but only after have exported them again if you know that you can recover later.

• Monitor intermittently do not wake from sleep mode

  I have a new Pavilion 500 - 205t Windows 7 Desktop (two weeks).  Two days earlier, after the computer is in mode 'sleep', the computer would wake up, but the screen would not.  I contacted HP Support and they said not to put the computer in mode 'sleep', but to turn it off instead.  They said that the computer could accumulate a static charge which could prevent the monitor to wake up from sleep mode.  Their solution was to force a shutdown by pressing the power switch, unplug at the back of the Tower, by pressing the power switch for 20 seconds, plug everything back in and then turn on the computer.  The monitor worked correctly then wake up from sleep mode.  For the last two days, the computer would wake properly from sleep mode.  Today, the same thing happens again.  This time, I turned off the computer and then he turned back to (without unplugging everything) and the monitor worked correctly.

  Here's my question:

  Is it really a static problem? (It has been cold and dry here for several weeks and static is high)  Or I have a hardware problem or software that needs to be fixed?  Thank you for your time.

  I think I found the solution to this problem for my computer.  I changed the settings for sleep or sleep 'Hybrid' or 'Hibernate' is allowed.  Since then, I have not experienced the problem.  I also changed what does the power button, so that when I press the power button, the computer shuts down normally.  This prevents a "forced" shutdown if the problem happens again.

  Thanks again Bill, for your time.  I mark this problem is resolved.

• I have my black getit monitor and the computer does not respound after 2 mnts when I start playing games online

  I have my black getit monitor and the computer does not respound after 2 mnts when I start playing games online

  Hello

  1. what operating system is installed on the computer?
  2. what web browser are you using to play the games online?
  3. don't you make changes to the computer before the show?

  If you use Internet Explorer, then I suggest you to try the steps from the following link:

  The problems of games online using Internet Explorer
  http://support.Microsoft.com/kb/2528246
  
  Additional information:
  Why my screen is black when I start Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Solve game problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-game-problems

  The problems of the game performance
  http://Windows.Microsoft.com/en-us/Windows-Vista/fixing-game-performance-problems

  Troubleshoot display with Microsoft games
  http://support.Microsoft.com/kb/263039