Slide stopping using widgets and master slides
Hello
Is there a better way than what we do because we dishes lose time and we put this process in rhythm in CP 5.5 and want to know what we can better in CP7.01
We want to have our slides to pause in the middle of each slide
Currently
-Our navigation buttons are on the master slide. These are widgets custom static at front and rear, because interactive objects cannot be set on master slides
-If you add a set of objects hidden on each slide to pause
We have complicated branching because
-We have glossaries and help
-branched scenarios
We must therefore really it works releiably
Problems
-our widget does not appear on the branched Viewer
-We make mistakes using the record of the previous displayed slide variable
We were concerned with a bar of reading because it
-to exit assessments
-allows users to ignore our simulations
who is Paul
Your statement '... because the interactive objects can be put slide masters are no longer valid since the COP6: there is only one type of interactive objects that can be used on blades of masters (or timed for the rest of the project) which are the form buttons. I talked much about them:
http://blog.lilybiri.com/why-i-like-shape-buttons-Captivate-6
http://blog.lilybiri.com/toggle-shape-buttons
http://blog.lilybiri.com/want-a-button-on-question-slide-in-Captivate
And I presented a webinar, info and the link can be found here: http://blogs.adobe.com/captivate/2012/09/training-lilybiris-favourite-shapes-to-trigger-ad vanced - actions.html
You can easily replace the static widgets by form buttons, they are much easier to 'style' and very flexible.
An example: If you want to take a break to each slide, add a button of form suspension (fill transparent and no race) to the master slide. Because there is no possible synchronization for objects on a slide, this break will always happen at the end of the slide, regardless of its duration. You can't time the break! If you have a form with pause button timed for the rest of the project, stopping there will be always at the same absolute time (relative is not possible, thought, I've had seen somewhere a question about a break halfway through the duration of the slide, but can't find it in your text).
I (almost) never use a bar reading myself. It is only useful for simple linear projects.
Lilybiri
Tags: Adobe Captivate
Similar Questions
-
2 different menus, using widgets and drop down
Hello
I'm looking to create 2 different menus for my Web site. the first will sit in the upper right corner and just be home. Contact | Brochures. The second menu is more complicated, with 6 different positions, all of which have a drop down menu. I understand using the manual option on the wdigets in order to create two menus. How to add drop down menus well? I don't see a way to do this.
I will be so grateful for any help at all.
Thank you!
Hello
Like you said you can create manual for both types, with manual menu menu, you can add the dropdown options with different menu items.
With the widget such as the accordion, the drop would be the container area.
Regarding manual menu, here is a good example that you can use and then bind items of menu to specific pages:
http://Muse.Adobe.com/exchange-library/tiptop-navigation-menu
Thank you
Sanjit
-
Firefox has arbitrarily disabled the IDMcc even if I used it several times a day for months with no problems. I want to reinstall IDM and use it. If I can't I will stop using Firefox and come back to IE. I prefer to stay with Firefox, but I won't be using a browser that doesn't let me use IDM which worked very well.
== I reloaded Firefox I told what IDM has been disabled
-
My slider controls when using Excel and Publisher became too sensitive
My slider controls when using Excel and Publisher have become too sensitive and more often, don't do what it is that I'm willing to do. For example: while in Publisher if I click on a photo, that I've inserted, and try to move it, it will automatically open the Format Picture option. She does it with a number of other features as well. If I'm in Excel and I'm trying to highlight a phrase, it will begin to highlight the requested sentence, then the middle of it will stop after the sense that I'm going with my cursor and it will pass at the end of the sentence. I guess you could say this kind of "jump" and the mouse became too sensitive with the controls. It's really frustrating and it feels like it has a mind of its own. At first, I thought maybe a low battery mouse, because she was the way she does when the battery is dying. Changed the battery and no change. I also tried to set my mouse speed and still nothing.
Any ideas?
Oh and btw this just started to happen during the first 4 to 6 months.
Hi H.Morton,
1. the problem occurs with excel and publisher?
2. what operating system do you use?
3. did you uninstall and reinstall the mouse drivers?
4. have you tried with another mouse and check?
5. do the mouse has a selection of sensitivity on the mouse itself?I suggest you to update the mouse drivers and see if that helps.
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly -
Trying to restore my calendar of office and then stop using iCloud
Is there a way to restore my contacts and calendar to desktop from iCloud, save them, and then disconnect from the iCloud without losing my data?
I was never able to synchronize to iCloud without problems, multiple contacts, desktop calendar lock trying to sync, etc. I restored my iPhone and cleaned the contacts with iMazing duplicate (which have yet to duplicate groups) so I have something to use on my phone at the moment. I am disconnected from iCloud on devices and the system prefs. until I have find this.
While cumbersome, and a one-way path, sync via iTunes was reliable. I used only iCloud to locate my phone. As I could not to iCloud master, I want to go back to the manual synchronization.
I'm in trouble with this one. My timing is critical. Any help would be greatly appreciated. Thank you!
Hi sdb2013,
I understand that you no longer want to use iCloud for keep your data synchronized between your devices. I'll include information here for troubleshooting iCloud, just in case you change your mind. The first thing I would say is to make sure that your MacBook Pro is backed up via Time Machine and your iPhone is saved via iCloud or iTunes. Then, take a look at the resources below that shows the steps to follow to back up all data you have in iCloud. If you disable the iCloud as calendar features on your iMac, you will be asked if you want to keep the data on your computer. It would be a starting point.
Use Time Machine to back up or restore your Mac
How do I Save your devices using iCloud or iTunes
Get help using iCloud Contacts, calendars, or reminders
Archive or make copies of your data to iCloud
iCloud: change the settings of the features in iCloud
You can change the iCloud features you use on any of your devices by turning functions on or off. You can also disable iCloud completely.
When you disable a function iCloud on a device, information stored only in iCloud for this feature are no longer available on the device. If you turn off your Mail, Contacts, calendars, Notes, reminders, iCloud photo library or iCloud Drive on a single device, you can always review and change your information at iCloud.com and on another device you have set up for this feature.
In some cases when disable you a feature in iCloud on a device, you can choose to keep a copy of the feature on this device information. The copied information is not synchronized with iCloud. If you disable mail, Contacts, calendars and tasks in iCloud for Windows on a computer Windows, information stored in iCloud remain available in Microsoft Outlook, but it is not updated with your other devices.
Before you disable a specific feature on all your devices, or before shutting iCloud completely, you can archive a copy of your iCloud computer data. For more information, see the Apple Support article Archive or make copies of your iCloud data.
Turn on or off features iCloud
Depending on the settings of the device you want to change, do one or more of the following:
On your iOS device: go to settings > iCloud, then type to enable or disable features iCloud.
On your Mac: choose the Apple menu > System Preferences, click on iCloud, and then select or deselect each feature.
Some features are not available or are listed differently in older versions of OS X.
On your Windows computer: Open iCloud for Windows, and then select or deselect each feature. To have your changes take effect, click on apply.
Some features are not available on your Windows computer or are listed differently, depending on whether your computer has Microsoft Outlook 2016 or earlier installed.
Installed Outlook: use iCloud Mail, Contacts, calendars and tasks in Outlook. Note that iCloud callbacks are called tasks in Outlook. If you turn off your Mail, Contacts, calendars and tasks, iCloud information remain available in Microsoft Outlook, but it is not synchronized with iCloud.
Not installed Outlook: use iCloud Mail, Contacts, calendars and reminders in your web browser on iCloud.com.
If you select bookmarks and your computer a Google Chrome or Mozilla Firefox installed, you can click Options to select Windows which bookmarks you want to keep up-to-date with bookmarks in Safari on your iOS devices and browsers Mac computers, set up for iCloud Safari. For more information about browsers supported by iCloud for Windows, see the Apple Support article system requirements for iCloud.
Completely disable iCloud
Depending on whether you want to stop using iCloud on all or only certain devices, do one or more of the following:
On your iOS device: go to settings > iCloud, then at the bottom of the screen, tap Sign Out (remove the account IOS 7 and earlier).
Note: If you disconnect from the iCloud (or delete your iCloud account), iCloud is no longer the backup data of iOS. You can always save your device in iTunes. For more information, open iTunes, then choose iTunes > help.
On your Mac: choose the Apple menu > System Preferences, click on iCloud, and then click Sign Out.
On your Windows computer: Open iCloud for Windows, and then click Disconnect.
Note: If you have activated the automatic download of music, app, or book of purchases (in the iTunes preferences or settings on your iOS device), your iTunes purchases are always uploaded on your devices.
Last modified: 25 March 2016
Sync your iPhone, iPad or iPod touch with iTunes via USB
Take care
-
IMO, request master password dialog box is not well labeled, and its identity (and authentic) seem a little in doubt whenever it appears. It is possible that someone could be spoof using JS and I could unwittingly put my "skeleton key" to a thief? Please tell me I'll be paranoid!
I don't think a script in an ordinary web page has the permission to read your passwords for other Web sites, even if you are not using a master password. It should be limited to see what password manager fills in the page.
For this reason, even if a page has captured your master password, I don't think that he could use it in a harmful way. But I'm maybe not quite devious.
-
How to stop using iCloud on my iMac and iPhone 5 c without losing years of photos?
I want that all my photos to be stored in my office. I want no more to use iCloud. How to stop using iCloud on my iMac and iPhone 5 c without losing years of photos?
This link can help:
-
MsMp Eng.exe running non stop using 100% of cpu and slow my computer down makes it difficult to use, I just need a way to disable this program
Hello Ian,
Have you tried the Task Manager to end? Right-click on the taskbar and select Start Task Manager. Locate the application and click on end task (at the bottom of the page). I wonder if it's a piece of malware running, or even a virus. If it will not be closed, or starts just backup again, consider using these scanners:
Malwarebytes': http://download.cnet.com/Malwarebytes-Anti-Malware/3000-8022_4-10804572.html .
SuperAntiSpyware: http://download.cnet.com/SuperAntiSpyware-Free-Edition/3000-8022_4-10523889.html .
ESET Online Scanner: http://www.eset.com/us/online-scanner/ .
Keep me posted and let me know how you fare.
Kind regards
BearPup
-
When I signed up for the cloud, I used it for a while. CS6 programs ran fine, but after I stopped using the cloud, CS6 programs were not usable. They said they couldn't do anything. I resigned from clouds and they worked again. Now, even once, cancelled my subscription of cloud and CS6 does not work yet. HMMM? !! Coincidence? Why Adobe divert my previous version of Creative Suite and make it unusable? Because they want you on the cloud so that they always get money on your part! Ridiculous! It is very clear to me. Adobe is a thief, twisted, manipulative and downright bad.
How we stop to resume my perpetual license CS6 creative cloud?
-
stop using the password for additional security
stop using the additional security password, thank you (you want to just use simple password).
Define a new master password and leave this field empty.
See change or remove the password:
-
Design pattern using queues and notifiers and problem with sync
Hello
I'm rearchitecturing a 4-channel data acquisition system which includes data acquisition, indexing of data between four channels, signal processing and recording of data.
All processes are placed in a single loop, and I have subdivided by the following in a producer and consumer two loop (or master with both loops slave), use a queue to manage orders and send the actual data through a notification list. I'm new to this, so I don't know how to go for rearhitecturing but am trying to move several loops. Instead of placing each channel in its own loop, I used only 2 to save duty all architecture. The acquired data are also indexed in the two loops (loop1, loop2):
Main loop: data acquisition (DAQ Assistant) where Notifier sends data to consumers loops, queue for General commands
Loop1: bed (table 2D index), addresses and records the data for channels 1 and 2
Loop2: bed (table 2D index), addresses and records the data for channels 3 and 4
Question 1: Is it ok to use Notifier and queue in the artchiture (best practices)? I would use two queues, but I find that the program may have a lag (although it lacks all data) and who interrupts the acquisition for the user and I don't want that. I prefer the program to retrieve data in real time and then decided to use the authors of notifications to send data to loops1 & 2. What are the caveats of this? Given that I am gaining at the rate of 1 s/s, maybe it will be enough.
With respect to the orders queue, this is done and two commands are queued in order to activate loops1 & 2. Using multiple loops slave/consumer, how we manage several channels? the user can choose to acquire all the channels simultaneously or one at a time. I am able to activate the four channels. In this case, because loops can not run in order, how do you ensure that the item is read by the right loop?
I'm running into a few problems:
Question 2: synchronizing data - use 'wait on ms' synchronize all loops (main loop and loop1, loop2)
-data doesn't seem to be very good sync - why is - this? consumer of treatment<>
-what I'm missing?
Question 3: processing loss data - because using filers is frozen and using queues is not, I did so that orders of the so-called 'turn on' the two loops is done using a queue. I compared it with the notifiers
Question 4: Errors - I made loops 1 & 2 output on the notifier error error - they throw an error when the program stops so happy so I was testing for. I read some ni.forums he's talking about is enough, but what are the other types of error monitoring (error reporting)? Thank you very much for reading!I programmed so far and it can read all or individual channels but I want check against all cases, that's why I ask these questions to check. I know that architecture may not be the best, so any suggestions would be welcome. I try to get the synchronization of the time and I don't want any data with loss. I guess that the use of queues to send data and commands is ok?
Thank you in advance for your help!
-
When a photo for example has a bright sky next to the dark object, using lights and shadows to reduce high contrast can cause a 'halo' or double-edge to appear. How can I avoid this?
From my experience, this isn't a problem that has a simple solution, such as moving a slider or a combination of the sliders in LR. It requires rather a major change in the technique, at the unit or in office. Some pros (I am not one) tire ALWAYS support HDR or this reason - better transition from highlights to shadows, then tweak the image with much less "heavy" necessary. Another popular technique is the luminosity masking and blending in PS. There is a ton of information on this topic (just do a search on Youtube), but it's not easy to learn or do, but it can eliminate this problem.
-
Tbird email phone synchronization using IMAP and Mail app?
Hello
Looks like I can do this verification but required double. I stopped using the e-mail a little backwards and use Tbird now.
But I'd like to be able to check your e-mail from my phone on a non-gmail address non-yahoo email. It uses one
separate domain name.Can I use the mail on an iPhone app and set up the Tbird on my computer as an IMAP instead of POP account
and basically to synchronize two e-mail clients to check the same e-mail address?I saw the IMAP and sync in the knowledge base article, which I shall call. I just want to know if
It's how people check e-mail on their phone.I'll reiterate, I don't want to use gmail or yahoo. I have a gmail account and I don't like the
interface enough also check that particular email using gmail account.Thank you
JaneI think you should remove your POP account first and then create a new IMAP.
It is the opposite.
http://KB.mozillazine.org/Convert_a_POP_account_to_a_IMAP_accountIn your opinion, is the best way to verify the account, even on an iPhone?
That's the whole point, to use the IMAP protocol on the phone as well.
I keep seeing references to add-ons, but I can't find what I'm looking for.
Do not know what makes reference to tell you and you want to install an add-on in the first place. I got the iPhone expect IMAP support out of the box. Is Thunderbird.
-
My data:
The application databases
Name: Firefox
Version: 30.0
User Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; RV:30.0) Gecko/20100101 Firefox/30.0Reports of incidents for the last 3 days
All Crash reports
Extensions
Name: NoScript
Version: 2.6.8.28
Enabled: true
ID: {73a6fe31-595d-460b-a920-fcc0f8843232}Name: convenience store
Version: 1.1
Enabled: true
ID: [email protected]Important change preferences
Browser.cache.Disk.Capacity: 358400
Browser.cache.Disk.smart_size_cached_value: 358400
Browser.cache.Disk.smart_size.first_run: false
Browser.cache.Disk.smart_size.use_old_max: false
browser.places.smartBookmarksVersion: 7
Browser.privatebrowsing.AutoStart: true
browser.sessionstore.upgradeBackup.latestBuildID: 20140605174243
Browser.Startup.homepage_override.buildid: 20140605174243
Browser.Startup.homepage_override.mstone: 30.0
dom.mozApps.used: true
extensions.lastAppVersion: 30.0
GFX. Direct2D.disabled: true
GFX. Direct3D.last_used_feature_level_idx: 0
layers. Acceleration.Disabled: true
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1402680066
places. History.expiration.transient_current_max_pages: 104858
plugin.disable_full_page_plugin_for_types: application/pdf
plugin.importedState: true
plugin. State.Flash: 0
plugin. State.Java: 0
plugin. State.npctrl: 0
plugin. State.npdeployjava: 0
plugin. State.npgoogleupdate: 0
plugin. State.npnv3dv: 0
plugin. State.npnv3dvstreaming: 0
plugin. State.npovshelper: 0
plugin. State.nppdfxcviewnpplugin: 0
plugin. State.NPSPWRAP: 0
plugin. State.npvlc: 0
privacy.sanitize.migrateFx3Prefs: trueGraphics
Description of the adapter: NVIDIA GeForce GTX 560 Ti
Drivers: nvd3dumx, nvwgf2umx, nvwgf2umx, nvd3dum, nvwgf2um, nvwgf2um
RAM card: 1024
Device ID: 0 x 1200
DirectWrite Enabled: false (6.2.9200.16571)
Driver date: 19/05/2014
Driver version: 9.18.13.3788
GPU #2 Active: false
GPU accelerated Windows: 0/1 Basic
Vendor ID: 0x10de
WebGL Renderer: Google Inc. - ANGLE (NVIDIA GeForce GTX 560 Ti Direct3D9Ex vs_3_0 ps_3_0)
windowLayerManagerRemote: false
AzureCanvasBackend: skiing
AzureContentBackend: Cairo
AzureFallbackCanvasBackend: Cairo
AzureSkiaAccelerated: 0JavaScript
Incremental GC: true
Accessibility
Enabled: false
Prevent accessibility: 0Versions of the library
NSPR
The expected minimum version: 4.10.6
Version: 4.10.6NSS
The expected minimum version: 3.16 base ECC
Version: 3.16 base ECCNSSSMIME
The expected minimum version: 3.16 base ECC
Version: 3.16 base ECCNSSSSL
The expected minimum version: 3.16 base ECC
Version: 3.16 base ECCNSSUTIL
The expected minimum version: 3.16
Version: 3.16Since the update to 30.0 my firefox does not close correctly. A process is always there (and the parent.lock as well).
I've tried so far:
-reinstall all the deleted information
-Disable all Plugins and Extensions
-close the menu.I usually love this browser and I use it for years.
Any help?
Thanks in advance
ThomasStart Firefox in Safe Mode {web link}
While you are in safe mode;
Press < Alt > or < F10 > to display the toolbar.
Followed;Windows; Tools > Options
Linux; Edit > Preferences
Mac; name of the application > PreferencesThen Advanced > General.
Find and stop using hardware acceleration.Dig safe web sites and see if there is still a problem. Then restart.
-
HPDM: HPDM replace self signed SSL certificates for server HDPM and master repository
I am trying to replace the automatically generated self-signed certificates (issued to DM) issued by DM server HDPM and master repository. I'm NOT arbitration FTPS, HTTPS embedded HPDM or CERT Thin Client Agent server.
I already have CERT for the installation of our own internal domain CA for FTPS in IIS and the built-in Apache HTTPS server. These work properly and pass tests of repository for both protocols. I also have questions for Thin Clients of our internal CA very well.
I am interested in the HPDM real server cert and cert master repository. These are generated automatically when the two services start. They use a very weak MD5 hash and key RSA 1024. I can't find any documentation around that, with the exception of troubleshooting, in which you can remove these certificates restart services and they will be regenerated.
Here are the paths certs\key
HPDM % install Path%\MasterRepositoryController\Controller.crt (Cert repository)HPDM % install Path%\MasterRepositoryController\Controller.key (repository key)
HPDM % install Path%\MasterRepositoryController\Client.crt (HPDM Server Cert)
HPDM % install Path%\Server\Bin\hpdmskey.keystore (Both HPDM server and repository Certs and keys) (not sure what format it is in. It is not PEM and P12 ok I can say)
There are also some HPDM % install Path%\Server\bin\hpdmcert.key. Don't know what it is. It's the key to the server HPDM but deleting it does nothing and it is never re auto generated in one of my tests.
I am able to replace the Controller.crt and keys with my own files CA internal those emitted very well. The service started and no errors occur. However if I replace the Client.cert (HPDM Server Cert) with my own service will start but there are Socket SSL errors in repository logs and the HPDM server could not connect to the master repository. I have no idea where the key file is supposed to be for HPDM Server Cert.
Can anyone help with this? I can't find the configuration files for the service to generate their own certificates. If I did I would try at least to change the config to do not use MD5.
Hello
These certiricates between HPDM server and MRC are not designed for customizable. Please submite one scenario if you have concerns of security on it.
Just for info:
hpdmcert. Key is for communication between the server HPDM and gateway HPDM
hpdmskey.keystore is for communication between the server HPDM and MRC
server_keystore is for the commhucation between HPDM server and the Console HPDM
Maybe you are looking for
-
Why my bookmark toolbar displays now TWO names instead of one?
This has just begun. Each tab in the bookmark in the toolbar now has TWO names. I can click with the right button on the bookmark, edit the name, and all that I have the bookmark title... it appears twice! For example. Titled bookmark... TAG shows as
-
Cannot use the recovery CD after update BIOS on Tecra 9000.
Failed to retrieve the system (Windows 2000) after update BIOS on Tecra 9000. Recovery CD says "it's a bad machine. Can I go back to old BIOS? Another solution?
-
Mid-2015 MB Pro Power adapter problems black pine
I had at least 10 portable Mac over the years and this is the first time I've seen that happen. The second axis on the adapter is black and will not charge the laptop. He's okay, sometimes if you stand up straight but it's absolutely not funny. You c
-
Satellite L655-121 PSK1JE integrates a video chip on i5 CPU does not work
Hello I have a question,Why the video integrated into the i5 450 m CPU does not only works the hd5650...? Why the site does not mention this model of toshiba laptop? My laptop is satellite L655-121 PSK1JE
-
Spectrum X 2: System disabled
Hello I forgot my BIOS password and I get the message out system. [62914575]. Can you help me? Thank you Leon