slightly different question on the Terminal Services

Similar Questions

• Can I disable the Terminal Services if I don't use remote assistance/remote desktop?

  I use can I have Vista 32 bit home premium

  I thought that Vista have no remote desktop? Is not Terminal identical remote desktop services?

  When I go

  MyComputer > right click > properties > remote adjustment

  the box for "Allow remote Assisnatnce" is NOT COCHEE

  But when I run Netstat - ano, I see that port 3389 is listening svchost.exe process when I checal what services are related to this particular svchost.exe, I see the following services:

  Cryptographic services
  DNS client
  network location awareness
  KtmRm for distributed transaction coordination
  telephony

  and Terminal Server services

  Seems to be at a point several years ago, I allowed someone from microsoft to help me through the assistance at a distance could therefore have enabled or downloaded services Terminal Server?

  In any case, I think that Terminal Services is initially port 3389 to remain open and thus get an unsolicited connection attempts from different IP addresses.

  I tried a little experiment and finished the Terminal Services and changed the status of manual start-up. When I still ran netstat - ano, he showed no listening on port 3389

  However, when I rebooted my computer Terminal Server was running again. So I ended it again but this time off the service. When I fell net stat - ano he showed terminal services does not. then when I restarted my computer, Terminal Server services do not have turn on port 3389 has not been shown that listening

  SO my question is, as a user of Vista which doesn't use remote help desk or remotely.

  1. I CAN keep the disabled Services Terminal Server?

  2. it cause me any problem of operation or security if she stays in the disabled state?

  3 have disabled will cause me to not be able to get the scheduled updates?

  Thank you

  But I have been informed by Norton Personal asa require a Terminal Server Services be, nit for the part of remote assistance, but for other reasons. They say I can't turn off

• Why the fast user switching and the new Windows Search use the Terminal Services?

  Recently, I was struck by a piece of really bad, malicious malware that totally trashed my operating system.  Therefore, as I rebuild my system, I am applying the appropriate safety precautions.  Among the recommendations of Microsoft is to reduce your footprint of security by disabling unnecessary services.  One of these services that I thought I didn't need was Terminal Server services, since it is a way for a person to get to my machine remotely.

  It turns out that, however, other services that I want to use, such as Fast user Switching and window new search utility, depend on the Terminal Server Services.  It makes no sense to me from a safety point of view.  This seems to be a bad design decision, because security trumps utility.

  If Microsoft is listening, I would like to know why you made this decision and you have changed in Windows 7?

  Second, is there a way to always have the Terminal services Server running and at the same time cut access remotely through this service?

  I don't know about the 'new' Windows Search, but what about the fast user switching you ask to run several sessions of Windows when you switch between users (a session for each user connected) and the only way that Windows can do is to act as a quasi Terminal Server, it needs Terminal Server services to run multiple sessions.

  John

• VMware View may be a good alternative for the Terminal Services?

  Hello people,

  We run the Terminal Services on Windows Server 2003 Ent. in a cluster environment. We have 4 TS who handle the load. Now, we are faced with a high volume of users within the company. We have a main office (Headquarters) and 10 more ease, all linking to the seat through the DRC. We are trying to find a better solution to deal with the high volume in a better way and we have VMware View.

  Do you think that is a good alternative?

  Any input, advice is really enjoying it.

  Thank you.

  I think that Desktop Virtualization (side Datacenter) and Terminal Server virtualization (Citrix or TS/RDP) pro and cons.

  You must deliver multiple environments or move the entire desktop to datacenter? Desktop virtualization could be better.

  You must provide a single application (or a few)? TS or some sort of virtualization to applications (such as ThinApp) solution could be better.

  Check out what you really need and how to access these services.

  Also consider licensing and where you can save costs.

  André

• Are there versions slightly different sizes of the standard Multiplugin for Cs5?

  A few days ago has posted a request for a list of the correct filters 64 bits for 64-bit photoshop Cs5 I had mixed a few filters with the standard. Noel had wanted to send me a list of filters for the 64 and 32-bit versions, so with the help of this list, I have carefully considered each filter keeping only those who was identical. It's simple, except in the case of the standard Multiplugin in which mine was very slightly larger than that of the list.

  I wonder if there may be versions slightly different dimensions of the standard Multiplugin which are all for 64-bit photoshop Cs5 and if this plugin is only actually found in 64-bit programs, so it must be OK?

  Thank you very much!

  The Photoshop dot releases have updated the standard multiplugin, and those who have different sizes.

• WebGate to access server connection status:-different status for the AM service

  What will be the effect if I pass ON the "Access Management Service" in Webgate. I understand that it will take to have the value WE for AccessServer-SDK. Died in Webgate translates into the following test posted on Webgate of the access server connection to the ' page.
  

  Does not
  Different status for the AM service

  thank you!
  Kabi

  Hi k,

  You only need the access management API if you are explicitly using the API Policy Manager (custom application), or for certain operations during some integrations (for example with Weblogic). Then, you can just assign it 'No' on all access servers and WebGates, or to 'Yes' If you think that you use.

  Kind regards
  Colin

• The Terminal Services WMI provider DLL is missing

  I have Windows POS 2009 ready installed.  The "WMIC SERVICE LIST" command fails with the absent error provider.  I checked the systems, and it seems that the "c:\windows\system32\tscfgwmi.dll" DLL is missing.  Anyone know how I get this installed on my system or what package installs this dll?

  I see it on m another system, but I can't determine what package installs.  I have all the updates that are installed.

  Please report all further follow-up replies to your new thread in the Windows Embedded POSReady forum: http://social.technet.microsoft.com/Forums/en-US/b4773ed4-23f3-4abf-ab8f-10f2b1d9198e/missing-terminal-services-wmi-provider-dll?forum=posready

  That being said, you could see http://support.microsoft.com/kb/822664

• Breath to connect to the Terminal Service pool, possible?

  Hello

  Am I right in thinking that as there is no option to activate the html for a Terminal Service pool based RDS access, that's not possible?

  What a shame. :-(

  You are right.  It's something that a lot of people would like to see in the future, however.

• a few questions about the Push Service

  Hi all

  Have some questions about a Service of BlackBerry Push.

  (1) when registering for the assessment, it is requested

  Source IP address for shoot - what happens if I have a dynamic IP and I have two servers different one for development and one for the Production environment?

  1. Push is via the BIS-B connection only
  2. Register to access push Eval with RIM. Download the SDK, which includes a sample application for the client side and 3 examples of applications for the side server. Once RIM gives you access to Eval, you'll have an app ID, password and other details. Deploy the provided sample applications and enter your Eval details when prompted. The client-side sample must be deployed on a real device (i.e. not a simulator). There is a catch: many developers (including myself) have reported on this forum that their client-side sample is not able to receive push messages.
  3. I did not look to push on BES, sorry.

  I am fairly new to push myself, feel free to correct me if I'm wrong.

• The Terminal services Server popup closed at startup

  After booting to the desktop, I get a popup saying services Terminal Server is not running. He reads an APPCRASH. I went to the services.msc and top one was auto and ongoing enforcement, the other 2 are manual and off... Always at every startup I get this warning. I have uac on and dep off following a conflict game.
  That's it, thank you

  Hi lobsta21,

  If you need Services Terminal Server or to prevent a person from remote desktopping in your system, you can disable TS on your computer and which should get rid of the boot error message. Try this:

  Go into the Control Panel - System - Remote Settings. Click the Remote tab, clear the check boxes.

  Let us know how it works for you.

  Dave Dave D D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Small Question about the Framework Services folder

  OK so I set it up and learn how to use CRMI to speak at the University Complutense of MADRID, I don't really need help in this regard.  My question is I am to read the documentation of records Services and read "FLD_CREATE_FOLDER" and has been in deficit.  A how can I find the GUID for the parent folder, and secondly I don't see a way to add the name of the new folder.  I'm a bit lost with this one hoping somone can point me in the right direction.

  Hello

  To obtain the GUID for the parent folder, you can use either the service FLD_INFO with IsJava = 1 parameter or executing the query on table FolderMetaDefaults.

  1. service a part:

  From the browser, use the following function call:

  http://ucmhostname:port/cs/idcplg? IdcService = FLD_INFO & path = / Folder1

  Here the path refers to the hierarchical structure for the real one whereby we create a new.

  For example: If Folder1 is created under the root, and unless we create a new subfolder then path = / Folder1

  If under Folder1, we subFolder1 then path = / Folder1/subFolder1.

  Than under ResultSet "FolderInfo" look for fFolderGUID and use it as the value for fParentGUID

  Sample code: https://forums.oracle.com/thread/2554885

  The code would be like this:

  dataBinder.putLocal ("IdcService", "FLD_CREATE_FOLDER");

  dataBinder.putLocal ("fParentGUID", "FLD_ROOT");

  dataBinder.putLocal ("fFolderName", "RIDCFF1");

  Example above creates a new folder under the root itself.

  I hope this helps.

  Thank you

  Srinath

• "Check video cable" message on HP 2311 x (different question than the original post from jca93)

  Hello

  The State monitoring displays:

  --

  STATUS MONITORING

  DVI: No Signal
  HDMI: No Signal
  VGA: assets

  Auto-Switch Source: Off

  By default the Source: VGA

  Recommended settings: 1920 x 1080 at 60 Hz

  --

  I only have the VGA cables, so I don't use DVI or HDMI to connect the monitor to the computer. I was configuring the display on the screen (OSD) when I accidentally went in Source code control Options and change the video source to VGA to HDMI (or DVI, that it is placed directly above VGA).

  By default, auto - switch should be on, but I turned it off a month before. Computer is not affected, control only. I tried Access Source Control Options, but the OSD appears.

  My question is: is it possible to fix this error without buying the other 2 types of cables? Is it possible to open the OSD menu?

  Help with an HP Expert or community will be much appreciated. If you give me more information, I'll be happy to comply.

  Please try to perform a hard reset on your monitor 2311 x;

  1. disconnect the power cord from the monitor.

  2. hold power for 30 seconds.

  3. reconnect the power cord pc.

  This should clear up your video present source question and your question OSD back to factory settings.

  Please send Bravo

• Question about the Vista Service Pack

  y at - it an accumliation of updates to windows vista Home premium which can be installed one.

  benjaminsl

  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791/

  You have Service Pack 1 and Service Pack 2, then you have to do the updates after SP2.

  So it's all in an update.

  You can save the service packs where you need them again for resettlement.

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Different questions on the new Satellite C855-2GX

  After buying Toshiba Satellite C855-2GX is really not worth everything $ pass on it that's the problem that I still meet the pc's NEW!
  For Specifcation: HARD drive of 500GB, 8 GB RAM Intel I5
  -Mouse Lag during the Anti-Virus Scan or install a heavy or even when the pc of the defragmentation program.
  -PC really even slow its i5...
  -When the battery is 10% sleep mode dosen't work WHAT? my pc on himself...
  Is there a solution? don't tell me to him MAKING the PC IS NEW...

  You have already started a thread on this topic (touchpad gal while doing something)
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?threadID=73816

  Follow the first thread to avoid misunderstandings!

• Terminal Services the differences between operating systems.

  Can someone tell me the default performance options used with the Terminal Services on Windows XP vs on Win2K3?  When I use TSWeb to connect to a Windows XP computer, I see wallpaper and see the full window on the trail.  But when I connect to Win2K3 server, I don't see these things.  I tweaked the settings AdvancedSettings.PerformancFlags during the call to the ActiveX control and can 'disable' those things when you connect to the XP machine.  But I want to know what are the default indicators for Win2K3 to ensure I'm turning off what I should be.  In addition, what type of bitmap caching is done on Win2K3, or better yet, what is recommended for the best performance?

  Sounds like a question you need to ask in the forum Services Terminal Server.  Try here:http://social.technet.microsoft.com/Forums/en/winserverTS/threads

  -B-
  http://www.officeforlawyers.com | http://www.OneNote-tips.com
  Author: Guide to counsel for Microsoft Outlook