Breath to connect to the Terminal Service pool, possible?

Similar Questions

• Why the fast user switching and the new Windows Search use the Terminal Services?

  Recently, I was struck by a piece of really bad, malicious malware that totally trashed my operating system.  Therefore, as I rebuild my system, I am applying the appropriate safety precautions.  Among the recommendations of Microsoft is to reduce your footprint of security by disabling unnecessary services.  One of these services that I thought I didn't need was Terminal Server services, since it is a way for a person to get to my machine remotely.

  It turns out that, however, other services that I want to use, such as Fast user Switching and window new search utility, depend on the Terminal Server Services.  It makes no sense to me from a safety point of view.  This seems to be a bad design decision, because security trumps utility.

  If Microsoft is listening, I would like to know why you made this decision and you have changed in Windows 7?

  Second, is there a way to always have the Terminal services Server running and at the same time cut access remotely through this service?

  I don't know about the 'new' Windows Search, but what about the fast user switching you ask to run several sessions of Windows when you switch between users (a session for each user connected) and the only way that Windows can do is to act as a quasi Terminal Server, it needs Terminal Server services to run multiple sessions.

  John

• Can I disable the Terminal Services if I don't use remote assistance/remote desktop?

  I use can I have Vista 32 bit home premium

  I thought that Vista have no remote desktop? Is not Terminal identical remote desktop services?

  When I go

  MyComputer > right click > properties > remote adjustment

  the box for "Allow remote Assisnatnce" is NOT COCHEE

  But when I run Netstat - ano, I see that port 3389 is listening svchost.exe process when I checal what services are related to this particular svchost.exe, I see the following services:

  Cryptographic services
  DNS client
  network location awareness
  KtmRm for distributed transaction coordination
  telephony

  and Terminal Server services

  Seems to be at a point several years ago, I allowed someone from microsoft to help me through the assistance at a distance could therefore have enabled or downloaded services Terminal Server?

  In any case, I think that Terminal Services is initially port 3389 to remain open and thus get an unsolicited connection attempts from different IP addresses.

  I tried a little experiment and finished the Terminal Services and changed the status of manual start-up. When I still ran netstat - ano, he showed no listening on port 3389

  However, when I rebooted my computer Terminal Server was running again. So I ended it again but this time off the service. When I fell net stat - ano he showed terminal services does not. then when I restarted my computer, Terminal Server services do not have turn on port 3389 has not been shown that listening

  SO my question is, as a user of Vista which doesn't use remote help desk or remotely.

  1. I CAN keep the disabled Services Terminal Server?

  2. it cause me any problem of operation or security if she stays in the disabled state?

  3 have disabled will cause me to not be able to get the scheduled updates?

  Thank you

  But I have been informed by Norton Personal asa require a Terminal Server Services be, nit for the part of remote assistance, but for other reasons. They say I can't turn off

• iPad connects to the cellular service

  After the update my iPad connects to the cellular service.  It is also much slower.

  You can't be alone on this, take a look at this other thread no cell service

  Did you do a hard reboot since the iOS upgrade?  As I mentioned in the other thread, if you can check the SIM card in another device that I think will prove that it is an iOS issue potentially and then try a reset settings network

  Settings - general - reset - network

• Unable to connect to the web services server

  Unable to connect to the web services server.  It is a common error that you might see if you try to enable web services.  If you receive this message, try the following steps.

  For Officejet printers

  1. open the internet browser type printer IP address.

  2 should bring you to the status of the printer page.

  3. Select the tab network at the top.

  4. left side select IPv4 under wireless.

  5. under DNS address Configuration select manual DNS server.

  6. for favorite enter 8.8.8.8

  7. for alternate enter 8.8.4.4

  8. Select apply. You can get a warning saying that this could break the connection which is very good.

  9. turn the printer off for about 30 seconds and then try to enable web services.

  For Photosmart printers

  1. Enter the printer's IP address in a browser.

  2 Select the network at the top of the page.

  3. on the left, select network.

  4. Select Network (IP) address

  5. select manual DNS server

  a. manual Preferred DNS should read 8.8.8.8

  b. alternate DNS server should read. 8.8.4.4

  6. Select apply you could get a fair warning select OK

  I hope this helps!

• Pavilion 140 550 - t: unable to connect to the windows service

  Not sure if it's the good advice of post, but here goes.

  Just got the HP computer yesterday and installed Norton Security, Malwarebytes, and Windows Live Mail (do not like the version of Mail). Now, when I start it, I get "Unable to connect to the Windows Service" pop up and WLM crashes when I try to open it. What the DEVIL?

  Had the same problem on the one I just replaced. My laptop became the 'Group Policy' error thing, but I think I fixed it.

  Any suggestions? Windows is a joke!

  If it is Norton Security, then it's a firewall as well and firewalls blocking things, it's that they are supposed to do. So demand for three, you said that this is probably the cause.

  But if you do not want to test it, then try the system restore I've mentioned or reload the image origin, then just put in place the email again and see if it works without the other two installed, first to see if it will work with anything else in the picture.

• Unable to connect to the wifi service in my house, how can this be repaired?

  I have a dell laptop and I am trying to understand how to do this.  I enter the key of the service network and the message says that the network password must be 40-140-bit according to your network. It can be entered as ascii characters 13-5 or 10-26 hexadecimal characters? How can this be repaired?

  Hi Vickiloo06,

  ·         Did you do changes on the computer before the show?

  ·         What happens exactly when you try to connect to the wifi service, you receive error message?

  I suggest you to consult the following Microsoft Knowledge Base article and check if it works.

   

  Unable to connect to an access point wireless with Wi - Fi Protected Access update installed

  http://support.Microsoft.com/kb/821442

   

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

  I hope this helps.

• The same day as my expired Norton my internet connection icon says... unknown internet connection. The dependency service or group was able to start.

  the dependency of the orgroup faaied to start service unknown Internet connection.

  The same day as my expired Norton my internet connection icon says... unknown internet connection. The dependency service or group was able to start. I tried all the suggestions on this page. Can't even find the virus that the internet not connected. My livebox is grateful for the laptop please help

  Hello

  ·         You will remember to do recent changes on the computer before this problem?

  ·         Is the question only for the icon network did you try to open a Web page and check?

  ·         What suggestions do you have tried?

  ·         What is the exact error message?

  ·         Have you tried all the steps from the link?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/connection-status-unknown-the-dependency-service/92203623-b6d5-4301-8c79-00210abbcdd4

  I suggest you follow the steps mentioned below:

  Method 1:

  Follow the steps in the link and check if the problem persists:

  http://support.Microsoft.com/kb/943996

  Registry warning:

  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the link below to follow the steps to back up registry:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2:

  If the previous step fails, follow the steps in the link and check if the problem persists:

  http://support.Microsoft.com/kb/936211

  Method 3:

  If the previous step fails, reset WinSock and check if the problem persists:

  http://support.Microsoft.com/kb/811259

  Registry warning:

  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the link below to follow the steps to back up registry:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 4:

  Temporarily disable the norton software (and any other security software) and the firewall on the computer as a test and check if this solves the problem follow the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program.

  Note: make sure that you enable the antivirus software, other security and firewall programs.

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• Vista problem: "failed to connect to the windows service, Windows cannot connect to the system event.

  I have reported this problem on my PC at home that connects to the internet. My laptop runs Vista Home Premium and I can't connect to the internet. I took my laptop on a trip, tried to connect to the wireless network that was free to the place we are. Could not connect, and after this initial test, the following is displayed after the start of "failed to connect to the Windows Service, Windows cannot connect to the system event notification service. This problem prevents limited users to logon to the system. As administratvie user, you can view the system event log to see why the service did not respond. "(have no idea how or what it means) when I go to the task bar you want to connect to a network, it is said:" the dependency service or group could not start"and if I go ahead and press"connect to a network"it says it can't find.  I search for computers on the network (who I'm sitting next to) and then try to diagnose the problem and it cannot. I have limited knowledge of this type of problem. Anyone have this problem and how to fix it?

  Hi ptkein,

  Thanks for posting your question on the Forums of Windows Vista.

  Option 1: You can download and install the latest network card drivers and see if that can solve the problem.

  Option 2: Follow the link below to fix network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Option 3: Follow the link below to solve Internet connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Option 4: To verify if a third party application is a cause, follow this link (http://windows.microsoft.com/en-us/windows-vista/Advanced-startup-options-including-safe-mode) for this boot to the desktop using the safe mode with networking option and try to install the network. If the problem is resolved, you will need to perform a clean boot by following the steps in the following article to refine the exact source and isolate it: http://support.microsoft.com/kb/929135

  Let me know if it worked.

  Hope it will be useful.

  Thank you and best regards,

  Kadoch - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 8 could not connect to the Customer Service of group policy on my HP Pavilion

  We recently purchased a HP Pavilion laptop g6 C7C77UA #ABL with 8 64-bit Windows. It seemed to work fine until a week ago (we only had it for 2 weeks). I can access the computer through my user that I'm the system administrator, but my husband try to click on the user whenever he has a message that appears saying Windows cannot connect to the customer service group policy, please see your system administrator. He could access his side in all first, we bought the computer.

  I did troubleshooting and it comes up saying that Windows Firewall is configured incorrectly. I tried to go in the windows firewall, but it is not letting me, he just guard spinning and finally said that he does not.

  So far, I like my HP Pavilion, but I'm about to throw it out the window because of Windows 8. Please help me! Thank you!

  Hello m-oickle,.

  Take a look at this document, which covers aspects of the restoration of your laptop.  Please let me know if the troubleshooting steps to help you solve your problem.

  Good luck!

• problem connecting to the web services server

  I tried to download the latest updates of software/firmware for my all-in-one HP Photosmart Prem C310a.

  I can't get updates or activate Web Services because it still gives me the error message "problem connect to the web services server.

  I tried everything in the section of the Web of HPs site including connection via WPS - unsucessfully problems.

  I understand that you have found impossible to connect to the server error message on your printer. I would first disconnect the router and the printer for about 1 minute. I would plug the router first then the printer. I would then try to enable web services. If not successful, and you get the same error message. I'd follow these steps.

  1 obtain the IP address of your printer
  a. This can be done by pressing the icon on the printer wireless.
  2. Enter the printer's IP address in a browser.
  3. Select the tab network at the top of the page.
  4. on the left, select network.
  5. Select Network (IP) address
  6. select manual DNS server
  a. manual Preferred DNS should read 8.8.8.8
  b. alternate DNS server should read. 8.8.4.4
  7. Select apply you could get a fair warning select OK.

• Error connecting to the Terminal for blackBerry Smartphones

  Hello

  I have a BB 8100, Desktop manager 4.6.

  The synchronization work properly 3-4 weeks ago.

  Today, when I tried to sync, I got this error message:

  0 x 80040fb3

  I tried debug it using the procedure of changing family name, first name, etc... without success

  I tried several times to synchronize again but without success.

  Now, the situation is even worse!

  New message when I connect my BB to my computer. When I run the Desktop Manager, I have the following error:

  "Error connecting to the Terminal. Make sure that your device is connected properly, and then try again.

  I can't not try to synchronize!

  It is very strange, it's never happened before.

  However, Desktop Manager recognize my BB, I can read on the button to the left of the screen: Terminal connected (Pin code) recognized xxxxxx.

  HELLLLP!

  Thank you

  You know what?

  I just read another post suggested.

  They simply offered to take off from the Blackberry battery and put it again.

  Then I tried to sync and IT WORKED! I can't believe! I tried a lot of complicated stuff!

  1 month for this problem! (with this simple solution!)

  Hope that now, everything will be ok!

  Concerning

• Failed to connect to the JMX service (209,1046) when you try to view the logs in PeopleTools 8.55

  I am trying to use the new functionality of Log Viewer PeopleTools 8.55.

  It is a great improvement that allows developers/testers/support team members to display the application server logs, process scheduler logs and newspapers PIA; with a regular account of the PeopleSoft Application.

  You have no need to create a system account on the server (Linux or Windows) for users to view the logs.

  I managed to configure the Web server log viewer, but when I try to Application I can see message failed to connect to the JMX service (209,1046).

  
  

  When I configure the JMX for APPDOM user, I tried PTADMIN with no success.

  
  

  Could someone describe the process to change the JMX user for Tuxedo domain?

  
  

  Thank you

  Stéphane.

  the default installation of DPK password is password.

  Kind regards

  / Stéphane.

• "Sorry, we could not connect to the Microsoft services right now. If the problem persists, look for 'referee' on the start screen.

  "Sorry, we could not connect to the Microsoft services right now. If the problem persists, look for 'referee' on the start screen.

  This appears when I try to connect with Microsoft Account.

  I tried all the possibilities that was displayed in the link but when even the problem exists... below you please suggest me the solution to add the microsoft account

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-networking/sorry-we-couldn

  Hi Nikhil,

  If you connect through a proxy, then I suggest you to try the steps suggested in this article and checking:

  http://support.Microsoft.com/kb/2778122/en-us

  Keep us updated on the results.

• VMware View may be a good alternative for the Terminal Services?

  Hello people,

  We run the Terminal Services on Windows Server 2003 Ent. in a cluster environment. We have 4 TS who handle the load. Now, we are faced with a high volume of users within the company. We have a main office (Headquarters) and 10 more ease, all linking to the seat through the DRC. We are trying to find a better solution to deal with the high volume in a better way and we have VMware View.

  Do you think that is a good alternative?

  Any input, advice is really enjoying it.

  Thank you.

  I think that Desktop Virtualization (side Datacenter) and Terminal Server virtualization (Citrix or TS/RDP) pro and cons.

  You must deliver multiple environments or move the entire desktop to datacenter? Desktop virtualization could be better.

  You must provide a single application (or a few)? TS or some sort of virtualization to applications (such as ThinApp) solution could be better.

  Check out what you really need and how to access these services.

  Also consider licensing and where you can save costs.

  André