SLM2048 web interface with firefox 4.0 problem
Updated Firefox 3.6 to 4.0 and now the slm2048 (firmware 2.0.0.8 & boot 1.0.1) web interface problems. I get the following error message:
error in Pager.SetpagerHTML String contains an invalid character.
Specifically, the problem is hyperlink to other ports in the switch port settings is missing. I tried 10 Chrome and IE 8 and the two have even worse problems.
Someone at - it one reasonable alternative to that roll back to Firefox 3.6?
David,
Actually the GUI for the slm2048 is designed to work with Internet Explorer 5 to 7 and firefox is a little maybe on the GUI. However, you can use the IEtab 2 addon for firefox.
Once installed, you will see an emplem of firefox in the lower right of the Web page. From there, click on the emblem of firefox and it will turn into an emblem of the internet Explorer.
Now you will be emulating explore a Web page in firefox and should not have problems with the GUI.
Tags: Cisco Support
Similar Questions
-
I'm an awkward soun effect when I go to ANY website with Firefox. The sound does not stop. I use a close new Mac Book Pro with the latest version of OSX and Firefox
This has happened
Each time Firefox opened
== I left the Air Warriors site, which I visited for years.
It's the 30th anniversary of Pac - Man today, and the Google home page is a playable game of Pac - Man around the Google logo. My boyfriend had the same problem, so I went to Google and was like Hey, it's Pac - Man! And then the siren began. It plays fine on my laptop but for some reason that the music is stuck on his computer.
All you have to do is to disable previews 'Cool' add on for firefox. Click 'Tools' at the top of the browser, go down to "Add-ons", go to the "Cool previews', click 'disable '. Restart firefox and it should be good!
-
print web compatible with firefox 6.0.2 hp?
I use the 64 bit version of windows 7 and Firefox 6.0.2 and checking compatibility with Firefox tells me that HP Web Printing should work, but doesn't show any side panel
Hello bewley1921,
the new 'HP Smart Print' (using the Bing toolbar) officially supports IE v6-9 right now, and I am also experincing the same question as you: Smart Print does not work on my latest version of Firefox (6.x.x)
However, I was informed that "HP Smart Print" fact application supports an earlier version of Firefox (4.0.1)... which is no longer, I installed.
FWIW: I'm now using HP Smart Print w/Bing on IE9... it works very well, actually.
-
When I go on youTube and click on a video, I get a black screen with controls and an arrow of beginning in the middle. When I click on the arrow to start, no video only comes up... just the statement: "year error occurred." Please try again later. "Same thing on other sites with videos. They will not play. Another site with videos, he says that the player will not load.
I cleared the cache, cookies, downloaded the new 14 beta version of firefox, tried to download an old version of Adobe Flash Player (11). I had Firefox v13.
Nothing has changed so far. I hope someone can help with this. All these sites and videos work fine when I use Internet Explorer.There are a few compatibility problems between the latest Flash Player (11.3) and some settings or Firefox Add-ons. Could see you if anything in this article helps you: 11.3 Flash does not load video in Firefox.
-
I have no sound watching videos with firefox but no problem while using internet explore
I have been using mozilla firefox on my laptop for a long time.recently I've upgraded to the new version of mozilla firefox 7. yesterday, I m facing problems while watching videos. I have no sound with videos using mozilla firefox but I have no problem with sound when using internet explorer.kindly solve the problem with my firefox.
See also:
- https://support.Mozilla.com/kb/no+sound+in+Firefox
- https://support.Mozilla.com/kb/video+or+audio+does+not+play
You can click on the Volume icon in the Windows taskbar near the clock and click on the link to mix down to open the mixing console.
You can adjust the volume level for each application in this window, so make sure that Firefox is not set to mute or set at a low level.
The current versions of Firefox using the process of plugin-container to run plugins, check the volume control for the process of plugin-container.
You will see the program Firefox or the Plugin Container in the mixer if you are on a website that plays sound. -
How to create the icon on the desktop to open a web page with Firefox
I created desktop icons to open web pages using the default browser, but I now need to create a few icons to open Web pages by using Mozilla Firefox.
If I use the command "firefox www.google.com" in the race... command it works fine, but I get an error saying that it is a wrong file name when I copy it to a desktop icon.Try to including the full path to your Firefox exe in the target field of your shortcut.
ex: "C:\Program Files\Mozilla Firefox\firefox.exe" "www.google.com".
-
Search Google with firefox 12.0 problem
When google returns search options, I click it and nothing happens
try to clear all cookies from Google.com and google.co.uk and browser cache.
-
Integrate the ICB with web interface
Hi all
We already have a CVI writes to order any of our instruments. We must develop a web interface to pass parameters to the CVI. In addition, currently the data is generated by the BCI as .csv files. What more we need to do is to transfer the data to a database as well. I did some research and discovered that Measurement Studio provides a .NET environment to control instruments. In addition, I think that the CVI/SQL Toolbox should be able to solve my problem of database. My question is who will Measurement Studio I want to integrate the CVI already present and communicate with him using a web interface? If so, what me does establish this communication?
Thank you
Kanu
Kanu,
Unfortunately, there is no easy or good way to create a web interface with CVI directly. You can do this in Visual Studio with Measurement Studio, but you will at least need to the professional edition to do because you want to use web forms. There are some resources with more information on the web forms, including this Walkthrough.
Since you already have an investment in CVI, I don't understand why you don't want to throw just as work on. According to the works of your code, you have a few options on how you try to bring together these two languages. You can try to make your C code in a DLL and call it in the .NET application, as in this discussion of the call to invoke from managed code. However, a better solution would probably be to use Of network Variables to communicate between the two programs. Then, you can limit the .NET application to be mostly just a control interface that writes to the network variables, which are then used in the CVI program that you've already written.
Hope this helps,
Jen W
Technical sales engineer
National Instruments
NI.com/support
-
Problem of separation with Firefox
I have some difficulty in working, why there are a large amount of white space when I first test my website with Firefox. The problem comes when I have this check with Firebug and say turn the element in question, that the problem resolves itself until I have to reload the page.
the test url is:
http://jonathanspeightdesign.co.UK/BBH-website/
Thank you in advance,
Jonathan Speight.I think the problem is that Firefox don't push the content down to make room for images in the slider. Once the script kicks in and restyles the cursor, Firefox does not move automatically content upward in its planned place.
Try to set:
#hero-frame {overflow: hidden;}
-
ACS Web Interface 5.1 does not
We have a Cisco Access Control Server (TACACS+ version 5.1) with an additional
2 port NIC card. This produces 4 ports on the ACS server(G0 through G3).After initial setup of the ACS server with an IP address on G0, I connected a Windows 7
server with IE8 to G0. The ACS web interface appears (after accepting certificate) and I
entered some user accounts and NDGs.I then connected the ACS server to a configured port with port-security on our 6500
switch. The port becomes err-disabled since the MAC address does not match up. It appears
that the onboard NIC on the ACS server is bonded thus producing the MAC address issue.To fix this connection issue, on the ACS server, I cleared out G0 and setup G2 (additiional
NIC card) with the IP address. After connecting to the 6500 switch, the ACS server port
works fine.I removed the connection to the 6500 and connected the Windows server to the ACS.I can ping
the ACS server but the web interface is now unavailable unlike before. I do not get a
certificate warning on IE, it just states that internet not available.On ACS, the 'show' status of acs shows all the processes are running and initialized.
Any help would be appreciated. It has got me stumped as all I did was change NIC configuration
on the ACS server.Antonio
I wanted to check if the failed to load web interface could also be due to something on the 6500 switch.
So far:
You have been able to see the Web interface with the ACS configured on G0 and directly connected to the PC Win 7.
With the G0 set to ACS, you saw some MAC problem and so no web interface.
With the ACS configured on G2, you can test the ACS server when it is directly connected and connected to the 6500, but in both cases do not display the web interface.
So, it seems that you have two options:
(1) seek to solve your problem of port security 6500. (You have access to set up the port-security 6500?)
(2) fix the G2 interface configuration. If you do not see the web interface with the Win 7 PC directly connected then there is something wrong with the config on GBA.
-
FlvPlayer works with FireFox but not with IE
Hello
I created an FLV Player to play remote. FLV movie. It works with Firefox but not with Internet Explorer 6 or 7. In fact, when I test locally on my desktop with local (on my desktop). File FLV movie player works in Internet Explorer. The problem seems to be my Web site, when reading remotely. FLV file, it only works with Firefox.
Try my Web site with Firefox and IE 6-7 and you will see only works with Firefox. Movie player (right section) to this remote file access: http://www.wikiguitarist.com/wikiguitarist/images/9/9a/CanonFuntwo.flv .
Since it is a Wikimedia site HTML code is generated from a PHP file. Here is the code that generates the HTML code.
Of Internet Explorer browser only interpret the tag: < embed >?
Why IE has problem to play remotely. File FLV and not Firefox?
Any idea, suggest code, suggest HTLML, action script...?
Thank you
Alain
Hi guys,.
Thank you very much, Jeckyl, you were right, it seems that only FLASVARS is allowed. Nevertheless, I will try to test if I can pass more than one variable/value less a statement of FLASVARS. For the moment, leaving only a statement of FLASVARS the video works fine with IE and Firefox. I'll do a little cleanup, it is true that my generated HTML code is a bit messy.
Thanks to WindShadow75 for your answer, now you see it works because I removed the additional declaration of FLASVARS.
Several guys from tanks, it is appreciated!
-
Web interface and communication series
I just started reading on the user Web interface. It seems useful, but I could not, how do I connect an application user Web interface with some series/USB instrument, for example. Is it possible to have VISAS screws normals and other toolkits within the user Web interface? Or maybe, it would be possible to develop a stand-alone application using LabVIEW (and all the screw and tool boxes that I am used to), and then import into the user Web interface?
Thank you
Marcelo
That's basically correct - LabVIEW code cannot be imported and you can not directly interface with hardware - and is the only authorized communication with web services (LabVIEW or otherwise).
So if you have any material you want with the Web Interface Builder interface, you will need to build a web service of LabVIEW that outlined some of the features and then consuming the Builder UI with the functionality of the Web Service to import.
-
PowerConnect 2824 cannot enter in the web interface
My company bought a powerconnect 2824, in any case this is the 1st time, I configure the Dell switch. I managed to Setup using cli mode, but after anyway I can't config interface only able to display information and also cannot enter the web interface with the default setting, or after.
What I did wrong?
Have you tried to connect to the web gui via different ports? you mentioned port 1 light does not, which is the port you are trying to access the switch through?
When you are connected to the CLI, which is the result of show # configuration interfaces?
What are the customers IP settings to?
-
When I click on send to a Craigslist of announcements of sale, e-mail software does not run. When I used the same craigslist Web page with Internet Explorer, the e-mail program runs without any problem. Not sure why this problem?
If you change your preference of mail helper in Firefox for 'other use '.... "you are presented with a command prompt to select an application click 'Browse... '. "and browse your computer for the program of choice. Even if you're already shown two e-mail programs, try to re - select the one you want to use via the method go and then try again to open a mailto link.
If this does not work, open your profile button in folder
Help > Troubleshooting Information
and the release of Firefox. With Firefox closed, remove the file "mimeTypes.rdf" of your profile folder, and then restart Firefox and Firefox will re - build the helper, file applications and you can try again to send someone from a link.
-
Since the last update of Firefox (Version 4.0.1) I do not see a security lock when I connect my two web sites to secure Bank so am forced to use Internet Explorer for internet banking. I contacted the St George Bank and the ANZ Bank and both say that the problem with Firefox, not their systems. They advise also strongly me to not perform Internet banking unless the security padlock closed is visible in the window secure. The padlock is not visible when I connect secure site of PayPal. Before the upgrade, this problem did not exist and there is no when I use IE. Firefox is my favorite browser.
The status bar everything has been redesigned, so now allows you to check if the site is secure the box to the left of the address (green, blue or plain).
The site identity button | How | Firefox help
Further discussion on this change mention an add-on, you can use if you really prefer to see a lock:
Firefox 4 where is the lower right corner of padlock | Firefox Support Forum | Firefox help
Maybe you are looking for
-
How to delete an account in Mail, contacts, calendars
An account appeared in Mail "Weather alert" with the name of someone else. There is a message "these settings are installed by the 'Weather alerts' profile. How. Can I remove it?
-
Satellite L450D - 11G - Microphone has stopped working
This built-in microphone now worked all of a sudden, it stopped. I have uninstalled and reinstalled again and made the webcam as well - the web cam works. The microphone is in the Device Manager as default, but it simply does not either sound. I trie
-
3000 - X 11: button / stop turns off but not on!
It's true! I have a 3000 - X 11 and the only way to start is with the switch of CD/DVD/Media Player - pressing the power button does nothing. When the machine is turned on, you CAN press the power button and the machine will be turned off... Any thou
-
cannot stream to 255.255.255.255
Guys, I'm having a hard time send and receive packets of 255.255.255.255 broadcast using the example provided. Could someone please help me to see what I'm missing? I have no problem to do this kind of things in java but labview is delicate. Thank
-
error code 8000FFFF when you try to install updates from windows update.
error code 8000FFFF when you try to install updates from windows update.