slots limit per user

Similar Questions

• How to limit rights to an Application Instance per user?

  This excellent post, I learned that I we can assign a form field to the notion of the right of an Instance of the Application.

  Is it possible to restrict the list of rights to an Application Instance per user?

  I mean, is there a way to show for example all rights for a user and only one or two for user B when the user submitted a request for clearance of a specific Instance of the Application?

  If so, is it possible to model the business logic using only the IOM or should I write my own business logic module for that?

  TIA

  Leo

  Without custom code to set the users it will show for in the catalogue, the OOTB option is based on the membership of the organization.  In the Administration Console system, if you go to all instances of the application, you can see which organizations you have published the application.  The same goes for the rights of this forum, you can also see which organizations law is published on.  It is the only default way to do this.

  -Kevin

• FileVault2. The encryption is done on a per-user basis.

  FileVault2. The encryption is done on a per-user basis, or if the entire disk is encrypted.

  What is the best way to use FileVault2 on a new Mac, if there are multiple user accounts.

  Concerning

  the entire disk, but not all disks on the system as far as I KNOW.

• If it hurts if I delete the system per user queued?

  original title: DURING the DISK CLEANUP

  WILL IT HURT IF I DELETE THE SYSTEM PER USER IN QUEUE AND WINDOWS ERROR REPORTING SYSTEM?
  I'M RUNNING OUT OF ROOM AND WHAT ARE THE FILES DEVOURS MORE SPACE!

  Yo can do that, but you can't win important disk space. The three main newspapers are system, security and Application and each maximum by default 20 MB each.

  How to deal with each must select Start, Control Panel, administrative tools, Event Viewer, Windows logs. Place the cursor on the system, click with the right button on the properties and select clear. Repeat for security and application logs. You can also change the default 20 480 KB 2 048 KB maximum. When you have completed the change make sure you click on apply. You must restart the computer to apply the new settings. You note miust use clearly if you want to set a lower maximum rate.

  You'll have more space by deleting old restore points. This action can greatly increase the free disk space.

  Select Start, all programs, accessories, System Tools, cleaning disk to emptying your trash, delete temporary Internet files and other selected options. I recommend also you click Other Options, System Restore and delete all but the last system restore point. Run Disk Defragmenter.

  Using the system restore option is most appropriate when your system is slow and you need to increase the free disk space on your C partition. If you have errors that could be solved by using the system restore to your system settings back to before the error occurred initially do not use this option.

  If more than one person uses the computer and they have their own user log you need to run Disk Cleanup in each user profile that you want to delete all the unwanted files.

  A better program of disk cleanup is cCleaner. Delete System Restore points may be important if you have little free disk space. The ability to delete them is one of the tools options. cCleaner comes with a registry tool. Do not use this tool as any registry cleaner could lead to the creation of very difficult to resolve system errors.

  http://www.CCleaner.com/download

• Disk Cleanup for Vista reports 12.6 GB for "per user queued windows error reporting"

  original title: clen-up disk

  My Cleanup utility disk Vista reports 12.6 GB for "per user queued windows error reporting". Is it safe to delete this item? Is that why my laptop is slow today and still freezes?

  Yes, but isn't concert read this this type of error: http://www.vistax64.com/tutorials/175654-disk-cleanup-windows-error-reporting-bug-fix.html

• ACS 5.2 - Support for RADIUS attributes per user

  Hi all

  Does anyone know if it is possible to configure the RADIUS attributes on a per user in GBA 5.2 basis?

  That was possible under ACS 4.x, however, that I can't seem to find reference if ACS5.2 supports.

  Thank you

  Leon

  You can do this by setting by using attributes and then by substution attribute.

  You can see an example of it to set an internal user attribute to use as the value for the field address-IP-box

  This is just an example and can be applied also to any attribute RADIUS in which set an attribute of the user of the same type. Values can also be taken from an external identity as AD store

• How can I set QoS policies on a per user basis?

  I'm trying to figure out how I might be able to have the QoS policies to change on a per-user basis, so that different users on the same computer, they might have different QoS policies. I'm looking to avoid having to implement server (no advertising). If there was an easy GUI for admins to change the levels of QoS for the system, it would be a bonus.

  Hello

  The question you have posted is better suited for the TechNet forums. I suggest you to report the issue in the following link for assistance:
  http://social.technet.Microsoft.com/forums/en/w7itproui/threads
   
   
   
  I hope that helps!

• You can buy JUST Adobe Stock for three users in a company? The guy I chatted with that said I had to pay $199.99 per year over $ 69.99 per user. Is this correct?

  You can buy JUST Adobe Stock for three users in a company? The guy I chatted with that said I had to pay $199.99 per year over $ 69.99 per user. Is this correct?

  When I go on the website of plan, it says 199.99 per license as well. Do we buy 3 licenses then 3 plans to 69.99 each apps? It's very confusing.

  Well I advise you to contact Adobe sales for the same because they can help you with the correct plan according to your needs.

  Contact us | Adobe

• By the price di creativo su per user (not per aziende) viene Emese manufacture singolo cloud by fiscalmente ITALIA P.IVA valida

  By the price di creativo su per user (not per aziende) viene Emese manufacture singolo cloud by fiscalmente ITALIA P.IVA valida

  Hello

  Purchase order, you will be asked to enter your VAT number, if you provide the VAT ID it will be printed on the invoice.

  Update this thread if you have any other questions.

  ^ Ani

• Creating native MSI bundle which is "per user" - based (no 'system' - based)

  I'm collecting all the information to create a native MSI package which 'by user' is based - but failed.
  
  This means:
  (.) The MSI should install to the local directory of the user
  (.) There should be no admin permission required
  
  When you use the default < fx: deploy... nativebundle = 'msi'... > element - ANT-, the MSI is created "system-wide" basis, installation in ' / Prorgram Files "and asking the admin permission.
  
  There is no concrete indication in the Oracle documentation (http://docs.oracle.com/javafx/2/deployment/self-contained-packaging.htm) how to create "per user" basis of MSI files. Maybe, someone already did it and could tell the imprortant steps...
  
  Thank you!
  
  PS: I know - using the .exe-company with Inno Setup will create "by user" installers by default, but I don't want to use if possible .exe

  Try
  
  Although the name of the parameter gives no indication this is system vs by user :)

  I checked that code bundler MSI and it should honour it.

  Let me know if it works (I don't have the time to try it myself today and go on vacation for a week so won't be able to check until I'm back).

  Mark

• Number of concurrent Sessions per user mismatch with profile settings

  Hello
  
  Version of DB Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
  OS RHES 5U2
  
  I created a profile MYPROFILE and set the value of simultaneous (per user) Sessions on 30. DB has rebounded after the creation of the profile. I made this default profile for a specific user 'MYUSER '. I checked that questioning DBA_USERS (select profile from dba_users where username like "MYUSER") I checked v$ session with this particular user after awhile and noticed that it showed 34 sessions. Certain ASSETS and the INACTIVE.
  
  My question is, if I set the maximum number of concurrent sessions per user on 30 to myprofile and made it the default for MYUSER profile, so how did I am still able to see more than 34 sessions of myuser regardless of the State? I don't know if it's relevant or not, but the IDLE TIME is set to 15 minutes.
  
  Thank you for your help
  
  Published by: user560883 on July 4, 2010 12:45 AM

  user560883 wrote:
  Hello

  Version of DB Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
  OS RHES 5U2

  I created a profile MYPROFILE and set the value of simultaneous (per user) Sessions on 30. DB has rebounded after the creation of the profile. I made this default profile for a specific user 'MYUSER '. I checked that questioning DBA_USERS (select profile from dba_users where username like "MYUSER" ;)) I checked v$ session with this particular user after awhile and noticed that it showed 34 sessions. Certain ASSETS and the INACTIVE.

  My question is, if I set the maximum number of concurrent sessions per user on 30 to myprofile and made it the default for MYUSER profile, so how did I am still able to see more than 34 sessions of myuser regardless of the State? I don't know if it's relevant or not, but the IDLE TIME is set to 15 minutes.

  Thank you for your help

  You have the parameter resource_limit = true ? You must do so before test sessions_per_user. You can do the following,

  alter system set resource_limit=true;
  

  After that, yet try and post comments.

  HTH
  Aman...

• Is it possible to limit the user to a session?

  Hello
  We have Oracle apps R 12.0.6, single node installation. Due to performance issues, I want to prevent the user not to have only a single session. Is it possible to limit the user to a session?
  
  Concerning
  Arizuddin

  Hello

  Is it possible to back out if necessary? We have to bounce the server applications after the loading event, subscriptions, or can it be implemented while the instance is up & running?

  You can return back (mentioned in the other thread). I think you have to bounce the application services once you are finished.

  Kind regards
  Hussein

• Limit SQL output per user

  In the sample sql below, I figured out how to be able to limit the production of words ending in a 5 for a specific user and would like to know if it is a more compact way to write this or is it the best way. This sql will be only the list of words ending with a 5 If the user = "Myself", otherwise if another user is connected, then they would see all terms in the sector.
  

  with ODP as
  (select distinct user, case when user = 'MYSELF' then 
                         substr(term,1,5)|| '5'
               else term
        end as ODPTerm
  from status_table
  where substr(term,6,1) = '5'
  )
  select distinct user, term, odpterm 
  from status_table
  left outer join ODP
  on term = ODPTerm
  where (user = 'MYSELF' AND ODPTerm IS NOT NULL)
   OR (user !='MYSELF' AND term between '201220' and '201245') 

  There are a lot of questions how security has been put in place and the actual query will be used in an Oracle report that runs via a URL. We were told that ITS prefer we create a separate report and restrict the term rather than trying to identify the user, however, this method would require that maintain us several reports since users are able to enter running parameters. We thought that since at this point there are only two users (Non-employee) who need the restriction, it would be better for our purpose for maintenance of report. The other reason is that ultimately we will be converting this report to the other reporting tool, which would have a different arrangement of safety, so wouldn't be a problem long term on the maintenance of the hard coded exclusion of user in the SQL statement.

  Hello

  Here's a way to do it:

  SELECT DISTINCT
          user
  ,     term
  ,     term     AS odpterm
  WHERE     (    user          = 'MYSELF'
       AND  SUBSTR (term, -1)     = '5'
       )
  OR     (    user          != 'MYSELF'
       AND  TERM          BETWEEN     '201220'
                           AND     '201245'
       )
  ;
  

  If you would care to post some examples of data (CREATE TABLE and INSERT statements), then I could test this.

  If you use Oracle Enterprise Edition, you can create a row-level security policy, such as the limitations like this automatically apply to any request made on the table. Search the virtual private database (or DPV ) and the dbms_rls package supplied by Oracle for more information.

  Published by: Frank Kulash, October 26, 2011 18:47

• Limit the sessions per user OEM

  Hi all
  We do not want an oem user to be used by several developer at the same time. Want to restrict the number of sessions to connect a user to oem. I tried sessions_per_user limited the backend for oem users, but it does not work.
  Is there something that I need to share this? Enjoy your advisor.
  
  WHO/db version 10.2.0.4
  
  Kind regards
  Satheesh Shanmugam
  http://borndba.com
  
  Published by: Borndba on January 12, 2010 15:34
  information update

  Satheesh,

  Unfortunately there is no implementation of the DB profile where neck defined the limit of session_per_user. So in fact, it won't work.

  I would say that the best way to get control over the number of developers connecting to the OEM, would create a custom for each developer account you allow access to OEM. Hereby, every developer would have his own account, which puts you in a much safer situation.

  Concerning
  Rob

• Scripts CPL to limit simultaneous users

  I want to configure a CPL script that will limit the number of concurrent users, based on the records in the Zone.

  Someone has it before completed or is it an example of script that I need to write

  Hi Peter,.

  If I understand correctly, you must limit the number of simultaneous calls in VCS and you intend to do by using the cpl is my understanding correct?

  If so, unfortunately, as I mentioned before in another thread, VCS provides no mechanism for counting the number of active calls and then to limit the calls after reaching a certain value. You need something out of the box to get your need, maybe a policy server custom call external, as I suggested in the other thread, will actually take a peek:

  https://supportforums.Cisco.com/message/4010381#4010381

  I see you really need to have a few VCS feature that allows to limit the number of concurrent calls, maybe something applied to a particular rule of subarea or research. As VCS does not provide this feature at the moment, I suggest you go ahead and make a feature request. Contact your Cisco representative, it can help you with this question.

  I also suggest a 'method is not perfect' to control the number of concurrent calls based on the limitation of bandwidth, it's the only thing you have in VCS inbox, itself:

  https://supportforums.Cisco.com/message/4004704#4004704

  I hope this helps

  Concerning

  Paulo Souza

  Please note the answers and mark it as "answered" as appropriate.