Slow 2011 MacBook Pro OS 10.11.2

Similar Questions

• 2011 Macbook pro running slow and beach balling

  My Early 2011 Macbook pro worked extremely slow for a few months.  He is lagging in the start-up and opening of all applications.  It also happened to coincide with my Wifi, refusing to recognize my Macbook, he repeated that a device was already on the network with the same IP address. I tried reseting the IP address several times.  But since he has never done this on other networks I received a new router this week and have not had a problem until now.

  The biggest problem is the race slow, hot and delay.  I have 8 GB of RAM and a 1 TB hard drive. I'm running OS X 10.11.5. Any suggestion or help is greatly appreciated!

  Model name: MacBook Pro

  Model identifier: MacBookPro8, 1

  Processor name: Intel Core i5

  Processor speed: 2.3 GHz

  Number of processors: 1

  Total number of cores: 2

  (By heart) L2 Cache: 256 KB

  L3 Cache: 3 MB

  Memory: 8 GB

  Try and reset your SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

  Hope this helps, good luck to you.

• Lion running on base 2011 MacBook Pro afraid of: upgrade to "El Capitan."

  I have a base 2011 MacBook Pro running Lion 10.7.5. It becomes kind of slow, but I just had it looked at. No problems. I'm afraid of a free upgrade to El Capitan as it may run more slowly. I have much stored and not in the game. Think to pay shop install for $30 Mountain Lion. Thoughts?

  There should be a reason why a Mac starts running slow.  First find the reason (s) and then upgrade.

  A good starting point is a download and publishing a report Etrecheck:

  http://www.etresoft.com/etrecheck

  Ciao.

• 13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. unplugged

  13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Early 2011 MacBook Pro GPUS

  Afternoon of God,

  I ran into a problem with my Early 2011 MacBook Pro. While I was working on my mission, my Mac stops completely. I try to restart it again, the screen is grey with red lines on the screen. As he invites you to the Apple logo it load half-way before it stops.

  I rebooted several times and get the same result.

  Can you help me with this problem.

  

  See if this program to repair Apple Extenstion applies:

  http://www.Apple.com/support/MacBookPro-videoissues/

  If you think that it applies, print this page and take it with you in an Apple Store. Some employees are not always aware of this program.

• 2011 MacBook Pro to stay inactive for 12 months +... Possible battery issues?

  If I put mothballed a 2011 MacBook Pro for 1 year or more, I should get the battery removed, even if the computer is off?

  Or can we safely be left in the machine for a long period of inactivity without fear of anything untoward happening?

  How to store a Macbook Pro properly during an extended period of time?

  https://support.Apple.com/en-us/HT201725

  Best.

• Very slow startup MacBook Pro

  Early 2011 MacBook Pro 8.2-2.3 GHz, Intel Core i7 X10.9.5 of OS running

  Starting last very long. Spinning last icon for about 10 minutes then the Apple icon is anther 10 minutes or more. Everything from here looks very good, but it makes me nervous. Had he listens to the store in 2014 to right before he went out of warranty. Utility ran and fixed all the permissions. Approximately 10% of capacity on the hard drive so maybe I need to delete some things or no load on the Passport.

  Reset the NVRAM/PRAM memory.  http://support.Apple.com/kb/PH18761

  Reset the SMC. Choose the method for "on Mac Laptops with non-removable battery.

  https://support.Apple.com/en-us/HT201295

  Safe boot mode.  https://support.Apple.com/kb/PH21875?locale=en_US

  Select Macintosh HD as the startup disk.

  'The value default startup disk' http://support.apple.com/kb/HT1310

  If this does not help, run EtreCheck and post the report here.

  http://etresoft.com/etrecheck

  Download, open the download folder, click on it to open it and select "Open" in the dialog box to execute.

  Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste it when replying.

• Updated 2011 MacBook Pro at El Capitan 10.11.4. At the opening of the Photos, he entered into mode 'Library Preparation', but was stuck at 50% complete for more than 30 minutes. What should I do?

  Updated 2011 MacBook Pro at El Capitan 10.11.4. At the opening of the Photos, he entered into mode 'Library Preparation', but was stuck at 50% complete for more than 30 minutes. What should I do?

  Give it time - it may take a few hours depending on the size of your library is

  LN

• End of 2011 MacBook Pro update

  Can I use memory Module Apple 8 GB 1600 MHz DDR3 (PC3-12800) - 2 x 4 GB to upgrade my end 2011 MacBook Pro (4 GB / 1333 Mhz)?  The representative said it's for 2012, but I read here that some have used it without problems on years later.

  Mac can be very picky with ram, unlike Windows machines. For that it works better with no trouble now or later, be sure to buy ram designed for Macs. Match sticks and speeds. Some Mac does not start if a faster ram is used. Go with 2 x 4 GB 1333 mhm, same SODIMM, made for Apple products.

• In early 2011, MacBook Pro won't start

  In early 2011, MacBook Pro won't start

  Is-ti connected? Fully charged?

  Give us some facts!

• Why the update did slow my MacBook pro down so

  Why the update did slow my MacBook pro down so much? What could be in the last update of El Capitan to slow my Mid 2010 GHz Intel Core 2 Duo Macbook Pro 2.66 down so much?   He has never run it slow before! Everything takes more time in all areas. Could I have made a mistake during the download and installation?  If so is it possible to force a re - install the latest update?

  I don't know if I can restore back after an update of this size. Everyone has similar problems or have thoughts on what could be wrong? I know it's far from being a State of the art Macbook Pro. But it was working fine before the update.

  Any thoughts would be really appreciated. I can't afford to buy anything newer right now.

  Thank you

  Ron Genovesi

  HMBGENO

  Things you can try to solve this problem:

  1 https://support.apple.com/kb/PH21875?viewlocale=en_US & local = en_US

  Start in safe mode and then restart.

  2. How to reset the NVRAM on your Mac - Apple Support

  Reset the NVRAM.

  If this does not help, download Etrecheck, a report and view the results here.

  http://etrecheck.com

• How can I switch from OSX Lion 10.7.5 to El Capitan on my end 2011 MacBook Pro?

  How to move from OS X Lion 10.7.5 to El Capitan on my end 2011 MacBook Pro? I get an error 'install the distribution of the error signed by apple. I'm sure I need first to switch to something else, but I have no idea where to start.

  1. check all your applications to ensure compatibility with ElCapitan.

  When those you want to keep (as possible) have a compatible update: you can update after installation.

  2 ElCapitan performs better with more than 4 GB of Ram, although in very low load systems, it runs on 2 GB.

  3. your hard drive doesn't have to be "nearly complete."

  4. go in the Appstore and download ElCapitan (the download comes in your Applications folder)

  The installer is removed after installation, so if you like to keep a copy before starting the installation.

  5. install all applications updated.

• tried to upgrade my 2011 macbook pro at el captaind, now there is nothing

  tried to upgrade my 2011 macbook pro el captain and the computer has lost the os

  You did a backup before the upgrade?

• How to replace the hard drive with an SSD on a model of end 2011 MacBook Pro 15 inch, A1286

  Hello

  I would like to replace the hard drive on my model of end 2011 MacBook Pro 15 inch, A1286 with a disk solid state drive (SSD). First of all, I would like to know if this is possible. Second, what is the best way to do it? I'm under the Yosemite OS if that makes a difference.

  Here are some technical details of my current system:

  -MacBook Pro 15 inch, late 2011 model A1286

  -OS yosemite

  -16 GB of memory/RAM

  -Currently using stock HD

  All instructions step by step would be helpful with what software should I use to make backups of my current operating system (e.g., SuperDuper). I would also like to know what tools or material I need like type of screwdriver, cables to transfer data to the SSD, etc.. My goal is to not have to reinstall each app one by one on the SSD, but if that's the only way to do it then it's okay.

  Thanks in advance for any help.

  You can see instructions OWC here. Tools are mentioned in the discussion (I used a plastic knife picnic with the stronger edge somewhat blunt for nylon pry tool). I suggest you invest in one of these external fences. Install the SSD in who and clone internally externally with CarbonCopyCloner or SuperDuper. Then move the external drive of the internal drive after the start of the SSD in the external to confirm the operation.

• Cintiq 21UX DTZ-2100 Compatible with end 2011 Macbook Pro?

  Everyone successfully connected a Cintiq 21UX to an end 2011 macbook pro? I could make using Windows 7 via bootcamp, however I was unsuccessfully trying to get IOS Lion to recognize the monitor. Am I missing something? I'm using the latest drivers and a DVI - I to mini display port connector.

  Thank you!

  M rich

  As much as I hate to say it, for the sake of someone else who has this problem, I'll answer my own question. I talked to a representative WACOM today and they asked if I'd handed the switch at the rear of the CINTIQ to DVI mode or if it was the VGA mode. Of course, it is VGA. After I hit the switch of the CINTIQ worked perfectly.