Slow check after moving documents to another drive

Similar Questions

• PSE7 moving images on another drive

  Hello

  I pse7 running and I added some photos, and now I want to move

  my photos to another folder. I lose all my tags? or how should I make the move in order

  to keep my database?

  Thanks for your time

  Christoph

  Use the folder view (Alt-Ctrl-3) location, drag the files from their current location to the new drive.

  Do not use Windows to do this.

• Restore 'My Documents' and 'Public records' alias after moved folder

  I moved my folder "Documents" of the user, as long as the public 'Documents' of my boot drive to a new drive for storage of files, I added.

  To do this, I opened the properties of the folder, the location tab and used the move... button to direct to the new location.

  After, my "Documents" library entry shows two folders 'Documents '.  Before the move, these folders have been listed with the alias "My Documents" and "Documents", which was a welcome orientation for the scope of these two files the same name.

  How to recreate these aliases at this point?

  Well, it's good. It is a common mistake for people to hurt set the new location as D:\ just for example, which means the entire root of the drive's "documents folder" (not exactly the end of the world, but it is difficult to undo and even harder to explain).  Anyway, you avoid this pitfall.

  The word "public" shown is not actually part of the name of the documents folder (not the 'my' on your own file).  It covers based on the presence of a text file inside the folder that told him of the special Act.  The folder itself is still called 'Documents' (complete actual path of C:\users\public\Documents), but the folder icon shows "Public Documents" because there is a file with hidden text in the file called desktop.ini telling him to see it.

  

  This part is pointing shell32 is just to find the English version of "Official Documents".  You could do what you want, such as:

  

  The folder looks like that it's called "Public things", but we call it actually still just 'Documents '.  The name is set according to the text of Desktop.ini.

  So in short, just to put this text file in the folder, mark it as a file system / hidden, and it will allow you to set the name of "presents itself as" to anything you want.

• can I share documents in iCloud drive with another drive to iCloud user?

  can I share documents in iCloud drive with another drive to iCloud user?  If so, how to do that?

  No, at the present time, iCloud is configured for use by a single account to share data between devices of the owner of this account.  Your best bet for what you are looking for would be to use a third party application like Dropbox or Google Drive.

  You can share files individual even if - iWork sharing links to documents in iCloud - Support Apple iWork

• Moving My Documents to another location

  It is a question of Windows XP.  My Documents was the installation to use a network share and also to synchronize with the local hard drive using the synchronization.  The NAS share on failed, so I tried to "Move" My Documents to another share.  The move failed, and now I'm left with only part My Documents.  Where are the original records of "Sync" so I can recover my data?

  Hello

  It seems that the data on your local disk could be deleted.

  There are other third-party apps available to recover lost or deleted from your hard drive files. I suggest you to browse internet for applications and then try to recover these files.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Adobe booth 7.1 on Win7 32 bit, 4 GB of ram - when creating a pdf file, that he was very quickly now that is very, very slowly, at 53 seconds of 8 pages.  We scan many documents and this slows us down.   I tried another directory, cleaning the th

  Adobe booth 7.1 on Win7 32 bit, 4 GB of ram - when creating a pdf file, that he was very quickly now that is very, very slowly, at 53 seconds of 8 pages.  We scan many documents and this slows us down.   I tried another directory, clean the current directory, remove other programs that have been added and stopped scanning of Kaspersky.  Any help would be greatly appreciated

  Assuming that you are talking about Adobe Acrobat 7 Standard, it is far from being compatible with Windows 7, if problems are to be expected.

  The first version which has been is 9.2, if I remember correctly.

• How can I tell lightroom 5 to use a catalog that is moved to another drive?

  I moved the entire file my images (including my Lightroom Catalog), which was previously on my Windows 7 (64 bit) drive c: to another drive (f) and now I need to update Lightroom so that he knows where to find his re catalog - find.

  Please could I have a few basic instructions to change the Lightroom settings, in order to reuse the old catalog.

  Thanks for your help,

  Ian

  It can be very simple or it can be complex. To start, first of all make sure that the catalog file (the one with the .lrcat (LRCAT) extension) and the file preview that has the same name as the catalog but with the extension Previews.lrdata file are in the same folder. With Lightroom closed, double-click the catalog file and it should start Lightroom, if the original photos files are in their original location every thing should be fine. If the original files are not in the same place, then you will need to navigate Lightroom where they are. Post for additional information if you need additional assistance.

• How do I reduce the data file after the moving images to another data file

  All,
  
  I did a test of simepl to see how should I reduce my data file after the transfer of the objects thereof.
  
  I had an image in my data file USER_image, which is about 9 GB in size. I created the new data under the new tablpespace file and moved all the images in this new space of tables. So my old tablespace of image with its data file is now empty. At least there is not all user objects.
  
  Now I tried to resize the old datafile (USER_image) to a smaller value, but I keep this error
  "ORA-03297: file contains data beyond the value required to RESIZE.
  
  The file size is 9 GB and I tried to resize to 8 GB but it still does not allow me.
  
  Is it possible to resize a data file after moving all its purpose?
  I'm something wrong or missing something?
  
  Thanks in advance.

  If you old image tablespace is indeed empty (you need to run a statement against DBA_SEGMENTS to check) then you can bring it, data files included.
  After this, you can create a 'new' tablespace with the old name and desired data file sizes.

• OK, how can I access my external hard drive after plug it into another computer? Original computer crashed.

  How do I get my new computer and I need access to my external hard drive? Original computer crashed and now I get a message saying ".

  Hi John and Missy Verhoog,

  1. What is the error message you are getting?

  2 have you checked the State of the drive in Device Manager?

  Check to see if the external drive is getting detected in Device Manager.

  a. Click Start, type devmgmt.msc and press to enter.

  b. find the name of the drive in the list of Bus USB controllers.

  c. right click on the device, and then select properties to view general information about the drivers.

  You can also read the following article and see if it helps:

  Install or remove a hard drive

  Hope this information is useful.

• move the My Documents folder to another drive

  Hello! I just upgraded to Win XP Pro for Win 7 x 64. no problems! I would like to move the My Documents folder, my drive C on my drive D. I was able to do under XP, but do not know the procedure for win 7? No information or advice will be greatly appreciated. Thank you.

  The My Documents folder is part of Windows 7 new document library. A library combines several folders that contain similar file types.

  To move your documents to the D drive:

  1. create a new folder of documents on the D drive.
  2. right click on the new folder and click include in library > Documents .
  3. click on Start > Documents .
  4. double-click My Documents to display its content.
  5 drag and drop the files to the new folder.
  6. press F5 to refresh the view.
  7. in the document library , click locations .
  8. right click on the new folder, and then click set as default save location .
  9. [optional] click My Documents , and then click Remove .
  Boulder computer Maven
  Most Microsoft Valuable Professional

• Say that the files are moved to another drive to lightroom

  At the moment I have my Lightroom .lrcat file and all my images on the same drive.

  If I want to spend all my images to another drive, but keep it on the original drive .lrcat file how to do this?

  Is there a way to quickly tell Lightroom my images, files are passed without having to go through the whole import business and a re-editing of images?

  Any help/advice you can offer would be appreciated.

  Thank you

  As long as you do not change the structure of the folders containing your photos, it's an easy task.

  Mark your catalog as "backup to the next exit. (just in case)

  Release of LR.

  Using your OS (Finder or Explorer) tools, move/copy the folder above your folder of image to the new drive tree.

  In LR, go to Control Panel files of the library module.

  If you don't see the highest folder in the tree, right-click and "view parents ' as many times as necessary.

  Right-click on the folder above (must be marked with '? '), select "search/move"; Navigate to the new location.

  LR will automatically correct the paths of everything in this folder.

• Unopenable after moving files

  When I move the files TIFF image on a server (I work in a Museum of history) a machine remote, often impossible to open these reliable image files.  Photoshop displays the message, "could not complete your request because it isn't the right kind of document.".   Look in Windows Explorer reveals that he has no data for these images in the column "Dimensions".  An attempt to rename the folder in which sometimes generates an "access denied" message (this occurs when the file is not open anywhere else).  No other Viewer or editor will open the file.  This doesn't happen when you move TIFF files from a remote computer on the server.  It also does not occur when you copy and stick a file only when it is cut and pasted or dragged and dropped.  He always seems to be a computer on the network, however, which can open the apparently altered files.  Curiously, it is not the same machine from one day to the other.  Sometimes, I was able to open these files after restarting the machine whose files have been moved to the origin.  I have not seen this happen with other types of image files (for example, JPEG files).  Our network administrator has not yet been able to solve the mystery.  What happens here?

  All what you describe sounds like a permissions problem access the file.  The default behavior is that moved files to another volume inherit the access permissions of the folder destination while the files moved within a volume to maintain their permissions.  Which copy (and not animated) files in the same volume, the copied file again will inherit the permissions of the folder to which it is moved to.  This is the default behavior.  It can be changed.  Everything is explained here:

  "How permissions are handled when you copy and move files and folders.
    <>http://support.Microsoft.com/kb/310316 >

  Another way to approach this problem is to check the folder that the file in network-transferred to has the access permissions for other users of this computer (as well as the folder that you end by moving to).  For more information on this aspect, try this link:

  "How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP"
    <>http://support.Microsoft.com/kb/307874 >

  Hope this helps,
  JW

• Missing files after moving files in Lightroom

  I moved files from one drive to another in Lightroom. During the move, Lightroom kept displays error messages 'missing photos', 'Photo can not be moved to destination ". After moving, some photos were gone. I got resynchronization folder but some pictures seem to have disappeared forever - they are not on the hard drive. I do not remember deleting them, but earlier that day, I exported the to jpg... I have a backup of the images, but when I tried to import with "do not import duplicates" checked, Lightroom has identified a few photos as duplicates - those that appeared after the re-synchronization of the folder. Not to mention that I lost a bit of work on the development, etc.

  That's what I did - I deleted the duplicates in the Lightroom Catalog to "all photos". Of course there are no duplicate files, I know

• K5400 prints the alignment page after each document

  I have a HP Officejet Pro K5400, which insists on an alignment page printing after each document.

  It's on Windows XP Pro SP3, if that makes a difference!

  I've tried everything I can think of to clarify this, but he persists.

  I know it's the printer, I moved and installed on another PC, and the error moves with the printer!

  Can someone tell me how to stop this, as HP don't seem to know!

  Message edited by JimW on 22/12/2008 08:26

  Excellent!

  Installation of new heads, (both for security), sorted!

• Re: Satellite L300 - after WarCraft 3 update display driver stopped wor

  Hello

  I have another problem with my video driver. After that I updated my previous issue has been resolved http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=165902#165902

  CoD2 works perfectly, but after I updated the video driver WarCraft 3 TFT stopped running. When I run the exe of the game begins, but when you start the game screens it sticks and after some time pops up a window telling me that the driver has stopped working and I should restart the computer.

  You have an idea how I can solve my problem?

  Good bye

  Hello!

  Have you checked the site WarCraft 3 factory for an update? Maybe it can solve this problem.
  Additionally, make sure that you have installed the latest version of DirectX. You can check it on the Microsoft Web site.

  I n t have Warcraft 3 but perhaps reinstall the game could solve this problem.

  Good bye