Unopenable after moving files

Similar Questions

• Missing files after moving files in Lightroom

  I moved files from one drive to another in Lightroom. During the move, Lightroom kept displays error messages 'missing photos', 'Photo can not be moved to destination ". After moving, some photos were gone. I got resynchronization folder but some pictures seem to have disappeared forever - they are not on the hard drive. I do not remember deleting them, but earlier that day, I exported the to jpg... I have a backup of the images, but when I tried to import with "do not import duplicates" checked, Lightroom has identified a few photos as duplicates - those that appeared after the re-synchronization of the folder. Not to mention that I lost a bit of work on the development, etc.

  That's what I did - I deleted the duplicates in the Lightroom Catalog to "all photos". Of course there are no duplicate files, I know

• Mac: Device virtual serial0: file... exist, but no server listening-error received after moving files in package vm hard

  I installed Fusion 2.0.4 and it works very well. I have created a virtual machine of my IBM T42 (80 GB HDD) and flies over the files. Works great for a week. Then I saw the video on how to do this and in the end, they suggest and then move the VM files (the 2 GB dismembered ones) in VMware created machine virtual file in the folder my documents (show the contents of the package and drag all the files - virtual disk - hard from 2 GB in it). I did this and with the very next reboot got the following dialog box:

  Device virtual serial0: file ' / var/folders/of/Ofj2TvSREZ8E9w8YsqlbxE +++ TI/Tmp / / vmware-jimstem/thnuclnt-312/socket - "exists, but he listens without a server.

  There are three possible causes for this:

  . The server is alive but not ready yet, and you can try again later.

  . The server is busy communicating with another customer, so you can't run this client at the same time.

  . A previous server is released abruptly, and you can delete the file and try again.

  The appliance is disconnected.

  This has happened AFTER that I moved these files of 2 GB in the contents of the package. Why? How should I do?

  With the Virtual Machine to stop, not suspended, of in the guest OS and closed Fusion de dans les os invite et fusion fermee redemarrer restart the Mac and then open Fusion, and then start the Virtual Machine and if you still get the error then provide files .log, as defined in the collection of information for VMware Fusion and the .vmx file and a list of files as defined in the document, the packaging of the Virtual Machine.  Archive and attach all requested files.

• Virtual machine file size does not decrease after moving files

  My Windows XP virtual machine file was about 25 GB after I migrated from a Windows PC on a Mac. So this morning I moved on the 12 GB of files of the virtual machine is the My Documents folder to the my Mac Documents folder.  However, the file size of the Virtual Machine does not decrease at all.  What ' s past? Is there a utility that I have to run to compress the file or something? Why the files of the Virtual Machine has not declined the amount of files moved to the Mac OS environment?

  JCC321 wrote:

  Thanks for the tips. I ran the cleaning disc as well as remove snapshots, but it only reduced the size of the file by about 1 to 2 GB. Much less than the 13 and 14 GB that was moved. Other ideas on where is hiding that extra GB of 11-12?

  You did copy or move, and if copied then you can remove and empty the trash?  Did you use Disk Cleanup to do some house-keeping file and empty all but the last restore Point before you shrink the disc?  Another way to check that is placed on a Windows system is to look at the drive with WinDirStat.  For the side Mac, check out GrandPerspective.

  Post edited by: WoodyZ

  I see that you have changed your answer so I answered it while I have quoted the original post, that I was responding to because you deleted what you posted.

• Why I no longer storage capacity after moving the files of external volumes?

  Disk utility reported that I had only 29.76 GB available; the 250 GB SSD was used as follows:

  Apps 48Go; Photos of 32 GB; Audio 24GO; 18 GB movies; Other 99.72 GB; Available 29.76 GB

  After moving to photos of 34.2 GB external volumes, films of 6,76 GB and files of documents 1 GB, disk utility has reported:

  Apps 48Go; Photos 9GB; Audio: 24 GB; Movies 11FR; Other 132,14; Available 29.76 GB

  After moving ~ 42 GB of data to external volumes, HD of 'other' content is passed to 132,14 GB 99,72 GB.

  Not after winning more space, I moved other files; Other rose the same amount and available showed I have now 39 GB

  I don't understand why 'other ' space used increases as much as I thought I had released.

  So, how can I increase the space available in this SSD?

  Thank you

  You can try to reboot to refresh

  or terminal may have a current look used and available to your applications/Utilities/Terminal.app

  copy and paste:

  DF H

• . M2T "generic import error" after the files moved

  That someone know something for winging a .m2t file that PrPro generated previously imported and edited very well, who has then squirrels after the file has been moved?  (details below)
  

  Thank you.

  -------------------------------------

  Recently, I moved the source (including the sidecar files) for work files off my C:\ to a backup disk, in a desperate move to take off a suddenly frigid Premiere Pro and still (C:\ drive space was extremely low).  I thought I was OK to do it, since I had exported all my final video files and confirmed that they looked fine (amount).  However, some of them were .m2t files, which still had no audio its chronology.  Much scrounging to find out later, I decided to try to re - export these files from their source PrPro projects, this time without audio multiplexing.  I expected to just move the source files in their new location.  It worked for most of the files, but not the .m2t file.

  Here are my patches attempts (failed):

  1. Use move function PrPro manually navigate to the file and select it.  (Fails.  File is not displayed in the location of the project and is still missing in the timeline.  "But PrPro generates no error to announce or explain the failure).
  2. Re-import the file in the current location.  (Fails.  I get "error importing generic," with zero further info.)
  3. Move the file (and the sidecar files) to the original location, then re - locate with PrPro.  (Fails, as 1.)
  4. Re-import a file in the location restored (after 3).  (Fails.  Same as (2).
  5. Copy and rename then file (and sidecar files) in restored location and then freshly import this file completely-news-to-PrPro.  (Fails.  Same as (2).

  I have not yet tried the things:

  1. Deleted cache.  I have read horror stories here on edit work days lost to empty cache, then now that I only once the discs are printed and iso are archived.
  2. Convert a file using another program .m2t. Strictly speaking, I tried with (groan) Windows MovieMaker, but it will not display an image larger than 740 x 480 (Yes, settings allow larger, but only as Giants black residents.)  I maybe reinstall my prior NLE (Avid Pinnacle) - should work, but may take hours to reinstall.

  Solution:

  I gave this fixation within PrPro and rather bought a type of video file converter.  I got Video Converter Ultimate of Wondershare, which was not too expensive and works well.  Now all my .m2t files are converted into file types PrPro like much better, and they import no problem in my project.

• Disorganized iTunes Media after moving to NAS

  Hello

  I have moved my iTunes for Synology NAS library and am maintaining the logical structure of the different media files.

  On the NAS, I created volume 'Media' where I moved to the iTunes library and where I want all kinds of media to reside and to share with others (Synology, Plex) apps. This volume is now the default iTunes media folder.

  I have relinked the library in ITunes without problem and can see everything as before, but when for example I am adding new content to music to iTunes (with 'Keep media' and 'Copy media in the iTunes folder') organized checked it lands directly in the 'media' instead of ' Media /Music"." Why and how can I solve this problem?

  I want to keep the structure of file like this:

  Media (volume)

  -Music

  -Artist name

  -Album name

  -Movies

  -Name of film

  TV - series

  -Show Name

  -Books

  -Etc.

  Is this possible? Is to select a volume than the main iTunes folder of media app messes things why?

  It seems OK, I had to «Organize library...» "after moving and all the orphaned files have been moved to /Music they belong.

  I think I like iTunes a little more now

• Directory to restore deleted after moving and change of name

  Hello

  I am very new to this please bare in mind. I deleted a directory to a network drive, after moving from directories and renamed. Durnig one of these actions, I deleted a.
  I contacted system administrator to retrieve images of backup but does not seem to work...
  Is it possible that it can not be restored? I've been to move this directory and change names several times in the last days before deleting...
  All the answers? Recover my data?
  Thank you

  Objects deleted on network drives are forever lost to the operating system, you will need to use data recovery software.  You must not use the network drive until you retrieve your files, or else you can overwrite the files while you are using the disk and make recovery impossible.

  John

• Moving files between disks problem cases

  I followed the instructions to move my Documents to another hard drive. The source was an internal SSD flash drive, the other disc was a typical internal hard drive. I use Windows 7 Professional.

  I do not give the new location a file but simply transferred on the disc, which had other files it contains.

  After moving Outlook stopped working because he could not find the necessary files.

  He wouldn't let me reverse the process until (hopefully), I could remember what was already on my 2nd drive before transfer and delete these files. He then I would reverse the Outlook process so now OK.

  If I follow the correct procedure, why Outlook did stop working and what other damage could cause such a transfer?

  Because although the wording of the utility indicates moving the "My Documents" folder move he actually just the contents of the folder to the new location.

  Assuming that the dialog shows the C:\Users\votre_nom_utilisateur\My Documents path you have two options.

  On the destination drive, create the path where you want the files, use the Browse button to select the new path and then move

  Or (and much simpler) select the current path, remove ONLY the part 'C' and replace it with "D" (if it's the new drive letter) so it reads D:\Users\votre_nom_utilisateur\My Documents and select move. Now, he must create the new path, move the files and folders and update the pointers.

  Make sure that Outlook is not running when you make the change.

• Keep the original creation date when copying or moving files (Windows XP/7, Windows Server 2003/2008)

  I know that the default behavior of (any version) Windows when copying or moving files, is that Windows makes everything first creates a new folder, copy the content, and when you move files, deletes the source after successful copy folder. Unlike Mac OS, where mechanisms of copy and move assume that when you copy a folder, the properties of the copied folder should have the same properties as the source folder, so to keep the original date of creation!

  Is it possible to change this behavior in Windows? I know that Robocopy in Windows Server 2008 has an option to keep the dates of creation of record, but I would like to know if you can change Windows 7/Windows Server 2008 behave similarly.

  It is very annoying that when you restore or copy a folder, the new folder has the date of the creation of the current date instead of the date of original creation.  People tend to look for old records that exist is no longer when you copied or moved the files.

  Hey E Kyung,
   
  There is no way to do this in windows. The design of Windows, this is the creation date refers to the file, while the date of the amendment relates to the content. If the creation date is really important to you, you can set after the copy with a utility.

  The easiest is to right-click on the file and drag it to the destination folder. you will be asked to copy or move. If you move, the creation date will not change.

  Yes, Robocopy is available in Windows 7.

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• 2015.2 breaks down after moving sensitive width or paste

  Since I updated to 2015.2, it crashes after moving the cursor width sensitive or copy and paste the content of the page of a page to another.  I tried to restart the computer for the update and uninstall too. always have the question after reinstall.

  Hi Jason,

  You will receive a file repaired of Marc. There was a corruption in one of the menus of the site (probably from a previous version of Muse). The new version has been correctly claiming corruption, so no further damage could be done. The repaired file should work just fine.

  Thank you

  Colby

• Macintosh HD disappeared from records while moving files on external hard drive

  Just as the title says.  I moved files in LR this morning of an external HD (created the new folder, drag / drop individual files to new folder HD) and after adding a large folder of photos (about 1/6 of my size of the entire catalog), the task is completed and my main Macintosh HD folder disappeared.  The files are still on display in large "all photographs" under catalog at the top and the files are still on my computer.

  Someone knows how to get Macintosh HD to reappear under folders, so I can move the remaining files of the photo the external HD?  I would rather not move them outside of Lightroom.

  Thank you!

  I've seen two similar situations like this in the last week or two, someone solved the problem simply by rebooting the computer.

• Problem after moving to new server vCenter

  I moved vCenter to a new server by following this article:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 5850444

  After editing the file vpxa.cfg with the new IP of the vCenter server and restart management services, all of my guests are still disconnected.  I tried to select "Connect" from the menu, which has been connected to the host.  However, HA not properly configures.  Has anyone seen these symptoms after moving to a new server vCenter? Ideas for how I can fix the problems?

  More details can be provided according to the needs

  Thank you

  Jeff

  Is / was enabled on this cluster HA?  Have your tried to disable HA on the cluster, and once that all your hosts have been added to the rear allowing HA again.

  In addition, even if you did, you can restart the agents once again all hosts in the cluster

  > service vmware-vpxa restart

  > service mgmt-vmware restart

• I moved a file to one internal drive to another on a MacPro mid 2012. Whenever I open a moved file, I have to update the links manually. Is there a procedure to do it automatically?

  I moved a file to one internal drive to another on a MacPro mid 2012. Whenever I open a moved file, I have to update the links manually. Is there a procedure to do it automatically?

  How to create the links?

  Are we talking ln links?  Use flexible links.  the default value is difficult.

  R

• After backup files and restoring Windows XP, I can't open the files backed up.

  After backup files and restoring Windows XP, I can't open the files backed up. The files are password on a user account. I know the password. But the message received when you try to open them is: access is denied. Drag / drop the files in 'Shared files' result in the same message. I know that the files exist, because when I open backup and browse for them, they are displayed. Is there a method to open? I have Windows XP Media Center Edition, Version 2002, Service Pack 3 update. I tried to back up the files with backup of backup, but it does not work.

  Hi error,.

  I suggest you follow the article in the Microsoft Knowledge Base and check.

  How to capture a file or a folder in Windows XP

  http://support.Microsoft.com/kb/308421

  I hope this helps.