Similar Questions

• WRT320N slows down the speed of connection - terms of support of Linksys problem

  My internet connection speed slows down to about half of it is normal speed (or worse) until I have restart my router WRT320N. I see on the net that MANY other people have the same problem and can't seem to find a solution to this problem.

  I have the latest version of the firmware installed and I have the upnp is off

  I was told recently by a representative of Linksys Chat to perform this procedure, and I was wondering if anyone has tried and there set the coupling apparently daily slowdown that set in a reboot of the router for another day or two

  Here is the procedure that I was instructed to do...
  I was told disconnest the modem to the router-connect "than a PC ONLY" via a wired port #4 - reset the router by holding the button of reset in 30 seconds - switch off the router Linksys for 20 seconds and then turn it back on - check the LEDs of the Linksys router to make sure that the power, WLAN and port #4 are lit on the Linksys router. -clone the MAC - change "Mixed" wireless settings - name - change to 20 Mhz channel bandwidth and network use standard channel 11 - and in - use the Mode personal WPA - security settings and set my WPA pre-shared key password
  Before shutting down the PC and router - reconnect the modem to the router and the PC to the router - then make sure that the modem, the router and the PC are disabled for cycle a minute and the power of their back on with the modem being first - then turn on the router and last the PC

  Has anyone tried this, and he had to fix this downturn?

  Thanks in advance

  Well it's been 6 days that I woke up this morning and turned on the router and the modem from power overnight or lower I did after question troubleshooting the slow speed in the night before, does not

  I consistantly get in the 2 to 3% of the broadband speed I pay for - but I have no idea what fixed the issue

  So I'll mark it as "Resolved" and just hope that it comes not back again

  Thanks for the recommendations Klatch

• Slow down the PC cannot connect to windows update

  I have a windows security alert "automatic updates turned off' when I go in the Panel screen won't let me turn on or off?  When I go to Explorer it does not connect to the Web site?

  (1) is this a recent problem and has it happened before, Ron?

  (2) what is the suite of security/antivirus installed; is it's subscription and current definitions; has whatever it is detected when the system changed was scanned with it?

  In the meantime, strongly suggests that you are investigating the system with the Microsoft Safety Scanner .
  Please post the results of the analysis.

  If you cannot download or run the MS Security Scanner then strongly suggest that you run this tool, Kaspersky - How to remove malware belonging to the family Rootkit.Win32.TDSS

• Flex 2 network slows down the entire network

  I bought a Flex 2 a few weeks ago. Installed the software Office 365 and creative cloud by Adobe. Everything worked well on both networks, I connect to.

  Today, performance on the entire network is now gone to the dogs. At first, I suspected the provider or router so crossed all the routines of standard service (this disconnect, which reboot) again and again. Same face, deadly slow performance of several PC and Mac on the network.

  Then, I hit on the idea to close my Lenovo. Suddenly, network download speed of 2 MB/s and the ping from 2000 MS to more normal speeds returned.

  I restarted the Lenovo a couple of times, from 2, 4 GHz to 5 with the same result.

  At some point when I plugged the Lenovo directly into the modem (part of the diagnosis) direct speed seemed faster.

  Because the router works perfectly with all the other machines and I haven't changed a thing on it, and because the symptoms get carried away on the network when the Lenovo is cut, I can only assume that there is something to do with the Lenovo Flex 2 and how it communicates with the rest of the network.

  I should also add that I tried to plug an ethernet cable to make sure that it wasn't just a wireless thing. Still had the slow performance.

  I'm pulling my hair out over this, if I can't fix it, I can't work (no one in my office will be able to work) and will have to return the machine...

  Any ideas?

  Thank you...

  Thanks for the reply.

  After much pulling hair and analysis where the traffic was, it turns out it was a Microsoft cloud service a too aggressive drive that decided to download dozens of large files at the same time instead of in series. This excessive series of connections slowed down the rate of time and transfer of ping everything on the network. Disable updates for OneDrive during periods of work seems to have solved the problem.

  That said, working on this, I see that updates from Lenovo is continually a significant overhead. Do not understand why it takes so resources...

  Thanks again for the response...

• I have 2 accounts directors and 1 standard account on my computer, it will slow down the speed of the computer

  I have 2 accounts directors and 1 standard account on my computer, it will slow down the speed of the computer, or if I have just 1 Administrator account it will make computer run faster

  N °

  Unless you are logging in to each account and switching between them - have each user run a lot of things.  Now * that * could slow down the computer.

  Otherwise, it's just - unused accounts unless you connect to them.  Again, storage space and unil you get below a few GB of free it - not no more worries.

• How do I disable Adobe Flash - too many sites have Flash ads that slow down the browser unless an analysis.

  Some pages contain 3, 4, 5 or more adobe flash ads running at the same time, which slows down the browser a lot. Then, if you happen to have several tabs open, the browser is dragging virtually interrupted and many times is not responding at all.

  I would like to be able to choose whether or not a page can run flash content - not it be something that works all the time for each page, with the only option being to kill the plugincontainer process in taskmanager - who kills even the Adobe Flash elements you can watch; like a youtube video.

  Why is there not a way to disable Adobe Flash in the browser? I have updated Firefox and Adobe Flash, but nowhere is there at - it an option to turn on or off according to your needs.

  A control can be added to the Internet Options that you can set to have a page request before it is allowed to run the Flash content? Having that kind of control would GREATLY increase the pleasure of sailing on several pages.

  Any information on how to do it, would be appreciated.

  Hello, this is already possible in firefox: go to firefox/tools > addons > plugins and shockwave flash to Activategame. then the plugin will be disabled by default but can be enabled on a site-by-site basis.

• Why FFx21, from the opening, thus creating three CACHE of INTERNET files duplicate (01, 02, 03 & tot'ng 12 MB) slows down the site?

  On the 'OPENING' Firefox for the web, there is an initial use of 12 + MB of use via INTERNET CACHE files. These files show up, when using CCleaner, as... \_CACHE_001, 002, 003 each with a size of say 4 096 Ko. The browser seems to "lag" - particularly visible when I type in one of the available search bars... I tap and then wait for the letter or the word to display. In addition, Firefox crashed several times since the upgrade to the latest version (ffox 21). I have two images CCleaner printscreen to show files so useful, but not sure how to enter them here.

  Hello, these are the files where firefox stores its cache - you won't need CCleaner (in fact, it will be only slow down the things that you have already noticed, given that these files must be recreated after the next startup of the browser), you can also clear the cache with the mechanism built into firefox: How to clear the cache of Firefox

• Can I use an SDXC (512MB) card as a drive hard primary (such as startup HD with El Capitan) on my iMac 5 K - end 2015? It will slow down the performance of the iMac?

  Can I use an SDXC (512MB) card as a drive hard primary (such as startup HD with El Capitan) on my iMac 5 K - end 2015? It will slow down the performance of the iMac?

  

  I did it with a 32GB SDHC UHS - I Transcend

  

  I do not recommend under OS X from such media, but it works very well. I was preparing for my review of the CPHA Yosemite and did not want to mess with the internal drive of OS X.

• Slow down the automatic transition

  Hello!

  I'm working on an introductory presentation with automatic switching between slides. I want to slow down the presentation (I tried to put a 15 seconds delay) but it keeps on changing every second...

  Can someone help me?

  (I must say that my speech is in french... so I hope I used the right conditions...!)

  The procedure is:

  Select all of the slides in the Panel of the browser (click on a slide and then use: control)

  Inspector > Animation > add an effect of > select the effect in the list

  on the start menu, transition drop-down list box select automatically

  change the time of 15 seconds (double-click the entry, type in 15 and then on enter)

  This not work?

• Slow down the Audio and keep beat related Sections

  Hello people,

  I have a song that I would like to remix and I all set beat matching.  When I go to slow down the audio I lose my bearings.  Is there anyway that I can keep the sections that I beat matched and slow down the audio so these sections remain?

  For example, that the song is 120bpm and I have this rhythm corresponded perfectly.  If I have a loop of 4 bars and slow down the audio I have more 4 perfect bars.  I want to be able to slow down the audio and still have my bars 4 faultless.

  I hope that makes sense.

  Logic Pro X: using Varispeed to change speed

• Slow down the speed of FAR FAR AWAY in iMovie 10.1

  In iMovie 10.1 FAR FAR AWAY effect scrolls too fast and I don't think I should buy a market after effect fix a bug. How can I slow down the speed of the text please?  Roll the credits cost $20 and it will not work with updates so it is not an option, in addition to its construction in already, it is adjustable and now is not!  HELP PLEASE

  See that work around posted by Vanessa D 19 dec in this link

  Slow down the title Far Far Away in iMovie 10.1?

  I don't use version 10 so can't comment, but the link it seems to work.

• is it possible to slow down the speed of scrolling text in the distance away from text generator?

  I'm trying to slow down the speed of text scrolling in the distance away from text generator.  Is it possible to make the text scrolls more slow?

  Stretch it to extend it.

• Prevent the Beep.vi slow down the VI

  Hello

  I'm working on a metronome that should run for a period of x with a frequency of x. The time is in seconds and rate.

  Whenever there is the beet, the VI must make a beep. This can be done easily by the beep.vi, but the standard for the beep.vi is to play one system.

  This is a fairly long tone (10 of Windows). And so, I want to put my own frequency and duration of the beep.

  But when I change this in the beep.vi, the VI will wait for the set time (msec) before it continues the vi. If it slows down the whole VI.

  Is there a way to make the beep.vi a sound signal with frequency and duration that I put, without that it slows down the VI?

  Thank you!

  Have the code "beep" performed asynchronously to your hand VI: have the VI in another loop and use a queue / notifier to notify the loop when playing the main loop.

• How to slow down the audio Windows Player speed, for language learning purposes?

  How to slow down the audio Windows Player speed, for language learning purposes?

  I assume you mean videos with speeches.

  1. start playback of the video.

  2 right click on the video then go it to improvements then the playback speed settings.

  You can control the speed of this Panel.

• My Vista crashed and I've switched back to XP. Now I have 1mil more old files compressed that I can't get rid of and it slows down the computer. How can I get rid of these files

  My Vista crashed and I've switched back to XP. Now I have 1mil more old files compressed that I can't get rid of and it slows down the computer. How can I get rid of these files.

  Hello

  1 are. what type of files?
  2. when they are stored?

  3. What is the size of these compressed files?

  Try to perform the clean boot on the computer and check if that helps.

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  See the bottom of the articles that might help you resolve this problem.
  How to make a computer faster: 6 ways to speed up your PC
  http://www.Microsoft.com/atwork/maintenance/speed.aspx
  Slow PC? Optimize your computer for peak performance
  http://www.Microsoft.com/athome/Setup/optimize.aspx