Slow Internet, if the installation is not possible. need to direct links to installers.

Similar Questions

• you just bought LR6 as I tried to install Adobe says that the installation is not possible because I am running Vista, even if I run Win7 Home Premium on my computer. Any ideas how to solve this problem?

  you just bought LR6 DVD that I tried to install Adobe says that the installation is not possible because I am running Vista, even if I run Win7 Home Premium on my computer. Any ideas how to solve this problem?

  Right click on the file Setup.exe and choose Properties option.

  Then click on the Compatibility tab.

  The value of the Windows 7 operating system and check.

  See the link below:

  trying to install lightroom 6 on windows 7 continues to receive operating requirement not met windows vista not supported

• HP ENVY x 360-15-w100nt: wi - fi connection slows down when the charger is not plugged

  Hello

  My wi - fi connection slows down when the charger is not plugged in. Correct the wireless lan drivers. So far, I appreciate all kinds of advice for this problem.

  Thanks in advance

  Hello @JohannNewma,

  Welcome to the HP support community! I read your post and wanted to tender hand can help you!

  I understand that you notice a decrease in speed wireless on the x 360-15-w100nt laptop computer ENVY when running off the battery voltage.

  You can check and adjust the power options on the system as it is probably trying to save battery power by reducing wireless performance.

  If you're still having problems, you can follow the steps described in this document to troubleshoot the network settings and internet wireless.

  Please get back to me how that happens. To show that you like, or are grateful for my post, please click the Thumbs up below.

  Thank you!

• Problems installing Windows 7 64-bit SP1: "The Installation was not successful" DS_S_SUCCESS (0x0)

  I'm unable to install the Windows 7 SP1 on my laptop.  I am running Win 7 64 bit and tried to install the 64-bit SP1 via the feature updates automatic first, then with the SP1 download manually (Windows6. 1 - KB976932 - X 64 .exe).   The progresses to install SP1 to the point where it shuts down the system and it is charging but when I log in I get the dialog Setup SP1 reporting "the Installation was not successful".  By clicking on the link error display shows DS_S_SUCCESS (0x0).

  (I followed the steps of troubleshooting 1) by using the Troubleshoot Utility "Difficulty of problems with Windows Update" and 2) installed tool Rediness of updating system, but the installation of SP1 still fails with the same error.

  I have successfully applied the SP1 on a different system.  No idea why I have problems with my laptop.

  Any ideas?

  C thx.

  Have you checked your hard drive to find errors? Another obscure, you might try is to disable User Account Control temporarily.

  Its possible, you need to perform an update of the BIOS if one is available for your ThinkPad T60p. Also, check the updated chipset drivers.

  Furthermore, disconnect any non-essential device, you may have attached to the system.

  Its possible the SP1 download may be corrupted, I would like to download another copy and try again.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• I tried to install the latest version of itunes with windows 10 but he said "there is a problem with the installation package. A program to complete the installation could not be executed. Please contact the support staff. No matter what guys?

  I tried to install the latest version of itunes with windows 10 but he said "there is a problem with the installation package. A program to complete the installation could not be executed. Please contact the support staff. No matter what guys?

  (1) temporarily disable your security/antivirus software

  (2) download iTunes from the official source: http://www.apple.com/itunes/download/

  (3) try to reinstall

  (4) turn on your anti-virus

• The Installation does not start! Error: Unable to launch vcredist_x86.exe

  Original title: the Installation does not start!

  My installation does not start. As soon as I put the disc in the drive, the installation wizard appears, but at this time there that weird noise comes from the disc. Then the this black window appears and the installation does not start. I got the game installed before on the computer. But he had problems, so I uninstalled the game. Then, when I tried to reinstall the game, it wouldn't install again. "And this error comes ~ could not launch vcredist_x86.exe".

  Help, please. Thank you!

  -Maryse

  Hello

  Please try to install the game in compatibility mode.  Here is some information that can be very practical...

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  -Check the functionality of the game under a spare user account

  Uninstall/reinstall the program

  -Clean Boot http://support.microsoft.com/kb/331796

  I hope that this information is beneficial.

  Thank you

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Try to format and do a clean install of Windows Vista on an old my computer HARD drive at home to be placed in a new Tower. The installation does not start.

  Try to format and do a clean install of Vitsa on an old my computer HARD drive at home to be placed in a new Tower. DVD starts up fine and then goes into an endless loop of the repair system that continues to check the c: / drive to find errors. Why is the installation does not start? I know that the folder c: / drive has Vista OS on it from my old compuetr. I want to wipe off immediately and start cleaning up.

  original title: try to install clean vista

  You must set your BIOS to start on the DVD from the beginning to the top.

  You have a good DVD of Vista (OEM/upgrade or full version) and NOT only a recovery disk provided by the manufacturer of the PC (or you burn you).

  For a DVD upgrade, follow the method here and make sure you format your HARD drive thanks to the tools of "advanced install" on the DVD.

  http://www.Vistax64.com/tutorials/68767-clean-install-upgrade-Vista.html

  If you have a full version of Vista rather than a version upgrade then just do the first part of the above procedure.

• When I tried to install Lync 2010, told me that the installer is not supported on my computer.

  Lync 2010

  I am running Windows 7. When I tried to install Lync 2010, told me that the installer is not supported on my computer and that I should use the 64-bit Installer to complete the installation. What should I do?

  Not sure I understand how "use the proper architecture of Windows 7". I use Win7 64-bit HP.  I have a license of HUD for Office Professional Plus 2010 including Lync.  Everything works except the Lync facility that gives the error message "the installer is not supported on your program. Please use the 64-bit Installer to complete. "How can I do this?  No option is provided when I try to run the install exe file.

• I am installing 13 items and get the installer could not initialize error... on mac...

  I am installing 13 items and get the installer could not initialize error... on mac...

  Please follow the steps in Photoshop elements 13 will not install & check if it helps you.

  Concerning

  Stéphane

• Firewall Windows disable the Internet Explorer loads Up after slow start after the installation of Windows updates

  Hello, (this the mystery of on and Off and back on Windows Firewall with slow loading of programs like Internet Explorer as this all is pass it on firewall, disable the firewall, the firewall, it occurs only during starts, after he fine / but very annoying on reboots whom he accuses of my computer down) / listed below is the cause of it , and when she first started, you have a solution?

  I recently installed the last 16 (High Profile) updates to security, for most security updates and updates from net framework as well as the removal of malware for windows XP tool.

  After installing these updates, now my Windows Firewall turns off during 'Boot Up' on all restarts. If I try to load Internet Explorer, it will also not load up to minutes serveral / while this happens... That's fine, then finally my firewall itself loads Up quickly turns to Internet Explorer and back on during this time around the same time.

  After these updates these things are happening on my computer now, it's as if there is a process running, but nothing run any virus, Trojan or worm etc just these updates caused this problem. I don't know if it updates is corrupt or not, but have tried different things as system file checker /scan etc with no luck.

  (1) computer boots to the top and seems to Load Up Fine ' until the ' or 'Look at this' but isn't, something is running in the background or process "wing unstalled" is obviously "unhooked", etc..

  2) try to load Internet Explorer last minutes and is very slow to load up, even if I 'don't load Internet Explorer' must still a long while that as in the firewall turn off for awhile some several «minutes» (way too long), before "auto turn on automatically return.

  (3) turns firewall Windows itself on "finally" as Internet Explorer finally loads upwards as well the two Internet Explorer is able to load 'definitely' and the firewall is on "finally" as many minutes later as listed above, at the same time.

  This could be the cause? Only, it has begun to 'After' I ran windows update and installed the 'most recently high security updates for windows XP' there were 16 listed mainly security updates and updates of net framework as well as the software removal tool windows malware.

  That's all that is changed on my system, I tried many things, nothing seems to fix this problem with my computer. I know for a fact that these updates are the cause, but am not sure that you caused it? Or how do to solve this problem, any sugguestions would be appreciated.

  Please answer questions following diagnosis by number in your very next answer (no need to quote this post):

  1. what application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  2 a Norton or McAfee application already installed on the computer?

  3. do you have a Norton or McAfee free trial come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  4. you are using IE6, IE7 or IE8?

  5. have you ALREADY had the opportunity to do a Repair Installation of Windows XP for some reason any?

  PS: PLEASE DO NOT START ANYTHING IN ADDITION TO NEW THREADS ABOUT IT!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Finish the installation of Windows after the restoration is not possible

  Hi, I have a problem with my laptop.

  All of a sudden the keyboard reacted as the SHIFT key is down. When I insert a cd I don't have the name of the file under the icon and firefox lost my favorite pages. I ran antivirus scans, but nothing came. so I decided to do a system recovery. Now on the first page, I have to do next to complete the installation of windows, I click on the next button and it is clicked. I'm on the first page and my laptop is out of use. can you help me please?

  thanx

  Theo

  Hello

  Well, Stefan has suggested that the recovery CD is corrupt, but for me it s does not erase if you used a recovery CD or the Microsoft Windows CD.
  What did you use?

  I think that the recovery CD should be corrupted and it works without any problem.
  You format the HARD drive correctly? Otherwise, do it first and delete all partitions and try reinstalling the operating system.

• Safari - the third party extensions installation is not possible

  Hello community,

  Since the update to Mac OS X El Capitan 10.11.3 I am unable to install Safari extensions from third parties (like Agilebits 1Password or ublock).

  I can double click on the extension and the weather of dialogue I trust the source appears (it's in German).

  

  But regardless of this choice, I do the extension ist not installed.

  My system is

  • iMac (retina 5K, 27 inches, end of 2014) - 4 GHz Intel Core i7, 32 GB 1600 MHz DDR3, 3 TB Fusion AMD Radeon R9 M295X 4096 MB drive
  • Safari 9.0.3 (since the update of 10.11.3 combo)

  I tried to

  • Restart the iMac
  • Install the 1Password file - 4.5.2.safariextz from different places
  • Remove extended attributes and ACLs to the file downloaded 1Password - 4.5.2.safariextz
  • uninstall all extensions and empty folder ~/Library/Safari/Extensions
  • install the extensions via the Terminal (Open ~/Downloads/1Password-4.5.2.safariextz or sudo Open ~ / Downloads/1Password-4.5.2.safariextz)
  • copy the 4.5.2.safariextz - 1Password directly at ~/Library/Safari/Extensions
  • Re-download the 1Password - 4.5.2.safariextz from somewhere else

  Also, Google showed no relevant problem my problem solutions.

  Currently, I am only able to install the extension directly from the Apple Extensions Gallery.

  The problem is that an extension of the Apple Extensions Gallery 1Password is obsolete and does not work properly with 1Password 6.0.1 (problems on amazon.com and other sites). Also not available in the Apple Extensions Gallery ublock.

  Has anyone else had similar problems and could solve them?

  Best regards

  Gerhard

  I got a solution.

  A reboot in safe mode did the trick.

  The internal caches of Mac OS X, most likely to rebuild...

• Recovery of the Internet and the Touchpad does not

  Hi all!

  I tried to format my Macbook Pro (2015 start, 13 "), so I wiped the disk with disk utility.

  Now, I'm the restart with CMD - R and a globe appears. I know that it means that the computer is trying to reboot from the internet, but I have to choose my Wi - Fi and insert the password.

  The problem is: the touchpad is not sensitive, so I can not perform the procedure. I also tried a keyboard and a USB mouse, but it does not work either.

  Thanks to anyone who responds!

  Start up your Mac in Mode without failure.

  Upper left corner of your screen, click on the Apple  > Shut Down.

  After your Mac stops, wait 10 seconds, then press the power button.

  As soon as you hear the startup tone, hold down the SHIFT key . You must press the SHIFT key as soon as possible after you hear the startup tone, but not before.

  Release the SHIFT key when you see the gray Apple logo and progress indicator.

  Once you are in Mode without failure, return to the menu Apple . In the drop-down list, click: reboot

  
  

  
  

  Then start while pressing the command + R keys to access internet recovery to restore the OS X.

  Just to let you know, you don't need to wipe the drive using disk utility in your Applications / Utilities first folder. Only use OS X Recovery

  to reformat and restore the OS X.

  On Safe Mode

• Cannot reinstall Windows XP after the removal of Windows 8. The installation does not complete.

  I installed win 8 January last on a xp pro machine, which was in surplus. I uninstalled the victory 8 and now impossible to reinstall win xp pro

  The computer is a homemade which ran from win xp pro for several years. I installed win 8 trial knowing that it would take a new installation of XP Pro after the expiration of the 8 victory. I have reset my bios on a cd first and started in the installation cd after installing win xp, it went to boot, and the cd has been removed. a restart was launched and he went into the bios to save install and after the robot below the windows splash logo made 3 passes, he stopped at halfway. After this is is spent in attempts to bppting I noticed that whenever the start stopped he left the Num lock, cap lock, and scroll liux lights were all on on the keyboard. I traded my keyboard with one of my current computer and it always occurres. I started to reload several times now and always the same. No bios settings have helped.

  Hello

  Unplug the machine to see if this allows the machine to reinstall the operating system of any material not needed (such as printers, fax, speakers, USB devices (except keyboard and mouse), Internet connections, etc.).

• dreamweaver CS3 installation is not possible

  I own dreamweaver CS3 since 2005, 4 years under Win7. After a PC crash, I try to install again, but not possible (the installation file is damaged). FixIt MS can not solve the problem. Still CS3 is old, I use it often. If there are problems on html, I can resolve it manually. How can I install my old CS3 good again?

  After that I completely deleted all the registry entries manually, the installation of CS3 could be made. His works now.

  Before I used the Adobe cleaning tool, but it is not enough, several registry entries remained, the installation CD was not possible.

  Thanks again!